I am getting RICH with knowledge watching this guy. He's so very good, and these videos he posted are in my honest opinion required viewing. I have only watched a fraction of his offerings and already solved most of my design issues. I mostly model for 3d-printing, but also use it for home projects. And he covers WOOD PROJECTS also! Another of my interests! The layout of his videos are great, easy to follow, and pleasant to the ears. Subscribing to his channel has been one of the best finds for me for 2024. This and another series on Python Scripting Fusion 360. Thank you sir, I sincerely appreciate the effort and you sharing your vast knowledge!! I hope to see a LOT more videos soon. I'm a fan! {LIKED=TRUE}
Hands down one of the top 3 best tutorial video series on F360 for beginners. Justin deserves an award for training excellence. Very much enjoy and value your hard work. Thank you!
Your videos are so helpful. For whatever reason, out of all the other videos I have been watching yours helps me understand what's actually going on, and the capabilities and uses a lot better. Thanks!
I'm trying to follow along here, but keep running into things you haven't covered yet. So I'm trying to do the Sweep function as shown in your second example (the "picture frame" one). I've drawn a profile on the xz plane, and a path on the xy plane. But Fusion is not letting me select the shape I want to use as my profile. It would help these videos a lot if you did them with a mind toward people following along as you go, and try to anticipate problems that might come up. So "If you're trying to select your Profile and Fusion wont select it, you might need to ____." Because right now I'm just stuck trying to guess why it won't work.
Thank you so much Justin, your tutorial videos are the best. I leaned SketchUp from your videos and went I switched to Fusion I was very glad to see you made tutorials for this software too!
Hi Justin many thanks for the great channel. I am currently on a very steep learning curve with fusion 360, I previously learnt Sketchup using The Sketchup Essentials. I have a design job I'm working on that has a particular complication, I scoured RUclips and can't find any examples which deal with this, or a similar issue, so I figure it may be of interest to you and other subscribers. I'm about to build a small structure designed by an architect which has a conical roof. Think of a silo roof, however this one does not extend up all the way to a point but is cut off at a lower level, so imagine cutting off the top of the cone leaving the bottom quarter. Now a silo roof generally has a reasonably steep pitch but this roof has a very shallow pitch so we now depress the "upper" part of the cone down to produce a very flat cone segment. So far it's all simple enough to do in Fusion. So here's the complication, I want to construct it using tapered flat segments of plywood. So they have to taper by the right amount and the edges have to be cut at the correct angle so they abut neatly. In addition to this on the lower side I want the two adjacent plywood panels to join with a V joint chamfer. I have considered creating a circle representing the bottom edge, making individual segment and using the pattern tool, however this will not automatically give the neatly abutting segments with the correct angle or the joint. Any thoughts?
Hey Justin, hope you’re doing wel irl. Thanks for all the tutorials! I’ve learned so much from your tutorials alone, I’m almost fluent in modeling in Fusion 360. Much appreciated for the time you put into these videos.
amazing series. just what I needed. thank you, great job! Gonna be binge watching the rest. excited to learn 360. I have been using blender for a few years but now feel the need to "start over" and learn to use 360 for more 3d printing and cad design.
Thank you so much for these tutorials, I’m learning so much from you. Please could you do a more detailed tutorial on the revolve tool. I’m struggling so much with this tool, particularly helping me with both the profile and axis. It’s only allowing me to revolve around the centre axis and not itself!
Justin, just found you. New Sub. I am new to Fusion 360. I find your teaching style to be easy to follow and comprehensive. One issue I am having is with entering a dimension after placing and pulling out a circle. While the diameter field is still blue I enter the wanted diameter and press Tab or Enter. The circle is drawn at whatever the diameter is that it was pulled out to. I have to go in and edit every dimension that I want. This is driving me crazy! I have done a search for this anomaly with no luck. I hope you can help. Mark
I'm trying to follow along but I need to create the sketches first a some of the sketches you had here I had no idea how to create them. Could you provide a file that has the sketches? I really learned better by doing as you go through the explanation Thanks Don
HI, I'm going through your tutorials in order (so far) and this third one builds on Sketch from the second one. But, if I try to replicate what you are doing on the screen here (which is how I usually learn), I need to know how to make curvilinear shapes. I'm experimenting, but having trouble figuring out how to control which direction the curve goes, and other important details. It would really help to either stick to shapes you can make with what you covered in the previous one, or expand the Sketch Tool section of the previous one to include how to make that curvilinear form. Thanks!
This software is amazing for a hobbyist. I tried to make a funnel but couldn't quite figure out how to make it. Got the hole cut out but I couldn't make them different sizes.
very good looking at your videos and found them great I have learnt a lot I have a question do you have a video explaining a solid object as i have made a clamp but it is not solid its like webbing and ideas thank Rob
Thank you very much wonderful video very informative if I draw few pieces is it possible to put all of them in a folder or a work envelope and recall each time I needed thanks
I was following along with the series, wish this video started out making those shapes you had in your design space. I was able to figure out the revolve tool, but moving into the sweep and i'm lost how you made that.. other than that I really was enjoying this tutorial
Great tutorial, love the way you simplified things. I’m with chimp Alien on the revolved tool, more infect on the spline tool, how you create the profile? Thank you for great videos.
Hi, could you explain in more detail how you got the PATH function set up on sketch s,or if you have it on another video,i finally got it, but im not sure if i did it right, so is it you have to have the Profile on its own sketch on a Different axes than the PATH and near the Path ? Thanks
create sketch, make circle, finish sketch, click on circle, right-click choose offset plane, enter distance to new plane from original. then click on that plane and create sketch, draw a circle then finish sketch. You will see that the circles are at different heights. You can also make a circle in sketch plane then use move tool and check copy and enter in the distance. This way you do not have to exit sketch mode.
I want to make a tapered cylinder. I know this can be done by creating two thin discs centered along an axis, then using the loft tool to join the space between them. Is there a way to do it using the cylinder tool and tapering while extruding?
After my post, I discovered that you could sketch a circle, then extrude it with a taper angle. Of course, you would have to use trigonometry to calculate the angle of taper and know the distance to extrude.
@TheFusionEssentials Great video, one question tho, so I made a word in 3D, I'd like to have it hollowed out but with the exact same values on all sides on the inside, how do I do this? Hope my question is asked the right way since English isn't my first language. And if possible to have a background on the letters, a very thin background, so it's hollowed out but still you can't see through, because I wan't to fill it with something else. (Trying to make a LED letter sign).
hello and thank you for a great helpful video, i am having a problem on the PATH part, i follow you step by step but when i choose SWEEP" after creating a path line in sketch, all the same windows and parameters are set just like you have them but when i click on Profile on my circle and path for my line they get high lighted ok but,nothing comes up after that.?what could I be missing, Thank you
in 4.52 of video where you talk about how to make that; I'm sure I missed how to make that drawing. so I created a circle; that becomes profile, then the line drawing and when I selected the circle as profile, it didn't work. must have missed something. not sure how to rotate circle to make this; so it's at the right angle. the error I get is the path is tangent to the profile, try adjusting path or rotating the profile, I was like ?
www.youtube.com/watch?v=QimeZSqS_ so I figured out the problem with this other video of yours, thanks. I always get excited when it worked. the issue was being on the right Plane, to make it work; also had to adjust he sharpness of the curve.
I am trying to use the sweep tool to create a shaped bar. The cross section is 30mm x 5 mm and the path is a simple L shape. However when I select the shape and the path I see the OK box in the sweep pull down menu is still grayed out so i can't complete the command - anyone any ideas as to what may be wrong ?
So...so many issues with this damn loft along a rail. "Your profiles can't be coplanar"...wtf, why not if it's going to follow a rail?! "Your rail doesn't intersect with your profiles"...wtf the rail runs right through the middle of both? Make it touch the edges of both, nope. Make it outside of both, nope. Try to delete any of it to adjust, nope you can't delete anything while you're inside a sketch (and most of the time out of a sketch). Is Fusion360 really this much of a steaming load of crap that it appears to be? I draw a thing...why can't I just select the damn thing and hit the Delete key? Nothing happens...it just unselects the thing. These tutorials need to start from a COMPLETELY EMPTY design to have a chance in hell of understanding how to get to the point where you can even try to use the loft tool or whatever.
In this video the example of the loft tool that goes around the circle from a circle to a square at 7:30, can you do that as a hollow tube? If so anyone know how or can direct me to info on how to accomplish it. TY in advance
Hi everyone! What's your favorite tool in this list? Let me know in the comments below the video!
I like revolve function
I am getting RICH with knowledge watching this guy. He's so very good, and these videos he posted are in my honest opinion required viewing. I have only watched a fraction of his offerings and already solved most of my design issues. I mostly model for 3d-printing, but also use it for home projects. And he covers WOOD PROJECTS also! Another of my interests! The layout of his videos are great, easy to follow, and pleasant to the ears. Subscribing to his channel has been one of the best finds for me for 2024. This and another series on Python Scripting Fusion 360. Thank you sir, I sincerely appreciate the effort and you sharing your vast knowledge!! I hope to see a LOT more videos soon. I'm a fan! {LIKED=TRUE}
Hands down one of the top 3 best tutorial video series on F360 for beginners. Justin deserves an award for training excellence. Very much enjoy and value your hard work. Thank you!
Your videos are so helpful. For whatever reason, out of all the other videos I have been watching yours helps me understand what's actually going on, and the capabilities and uses a lot better. Thanks!
Thank you for making these videos. They really help getting started.
I am glad I found Fusion 360 tutorials from Justin, thank you so much. I learnt SketchUp through your tutorials. Now I will work through all of these.
only took me 2 hours too watch this video but i tested every function to practice
thank you
I'm trying to follow along here, but keep running into things you haven't covered yet. So I'm trying to do the Sweep function as shown in your second example (the "picture frame" one). I've drawn a profile on the xz plane, and a path on the xy plane. But Fusion is not letting me select the shape I want to use as my profile. It would help these videos a lot if you did them with a mind toward people following along as you go, and try to anticipate problems that might come up. So "If you're trying to select your Profile and Fusion wont select it, you might need to ____." Because right now I'm just stuck trying to guess why it won't work.
Thanks Justin for another excellent tutorial 👍🏻 I was looking at all your tutorials to see if you did one for constructing a fan for 3d printing 👍🏻🧐😊
Thank you for making these videos, it really helps me to get started.
Thank you so much Justin, your tutorial videos are the best. I leaned SketchUp from your videos and went I switched to Fusion I was very glad to see you made tutorials for this software too!
i I would like to see how to take a tub the has different diameters at each and turn it into a flat pattern. Your tutorials are great. thanks
Hi Justin many thanks for the great channel. I am currently on a very steep learning curve with fusion 360, I previously learnt Sketchup using The Sketchup Essentials.
I have a design job I'm working on that has a particular complication, I scoured RUclips and can't find any examples which deal with this, or a similar issue, so I figure it may be of interest to you and other subscribers.
I'm about to build a small structure designed by an architect which has a conical roof. Think of a silo roof, however this one does not extend up all the way to a point but is cut off at a lower level, so imagine cutting off the top of the cone leaving the bottom quarter. Now a silo roof generally has a reasonably steep pitch but this roof has a very shallow pitch so we now depress the "upper" part of the cone down to produce a very flat cone segment. So far it's all simple enough to do in Fusion. So here's the complication, I want to construct it using tapered flat segments of plywood. So they have to taper by the right amount and the edges have to be cut at the correct angle so they abut neatly. In addition to this on the lower side I want the two adjacent plywood panels to join with a V joint chamfer.
I have considered creating a circle representing the bottom edge, making individual segment and using the pattern tool, however this will not automatically give the neatly abutting segments with the correct angle or the joint. Any thoughts?
Just started to learn F360. These videos are clear and concise and really easy to follow. Thanks very much for creating these.
Hey Justin, hope you’re doing wel irl. Thanks for all the tutorials! I’ve learned so much from your tutorials alone, I’m almost fluent in modeling in Fusion 360. Much appreciated for the time you put into these videos.
amazing series. just what I needed. thank you, great job! Gonna be binge watching the rest. excited to learn 360. I have been using blender for a few years but now feel the need to "start over" and learn to use 360 for more 3d printing and cad design.
Thanks for these videos, they're really clear and well explained!
Really enjoying these tutorials.Amazing what the software is capable of doing.Thanks for your easy to understand tutorials.
Justin you rock! simple clear and concise
Thank you so much for these tutorials, I’m learning so much from you. Please could you do a more detailed tutorial on the revolve tool. I’m struggling so much with this tool, particularly helping me with both the profile and axis. It’s only allowing me to revolve around the centre axis and not itself!
Justin, just found you. New Sub. I am new to Fusion 360. I find your teaching style to be easy to follow and comprehensive. One issue I am having is with entering a dimension after placing and pulling out a circle. While the diameter field is still blue I enter the wanted diameter and press Tab or Enter. The circle is drawn at whatever the diameter is that it was pulled out to. I have to go in and edit every dimension that I want. This is driving me crazy! I have done a search for this anomaly with no luck. I hope you can help.
Mark
I'm trying to follow along but I need to create the sketches first a some of the sketches you had here I had no idea how to create them.
Could you provide a file that has the sketches? I really learned better by doing as you go through the explanation
Thanks Don
HI, I'm going through your tutorials in order (so far) and this third one builds on Sketch from the second one. But, if I try to replicate what you are doing on the screen here (which is how I usually learn), I need to know how to make curvilinear shapes. I'm experimenting, but having trouble figuring out how to control which direction the curve goes, and other important details. It would really help to either stick to shapes you can make with what you covered in the previous one, or expand the Sketch Tool section of the previous one to include how to make that curvilinear form. Thanks!
This was really good. Going from design spark mechanical to fusion and I needed a quick how-to of using the tools.
This software is amazing for a hobbyist. I tried to make a funnel but couldn't quite figure out how to make it. Got the hole cut out but I couldn't make them different sizes.
Brilliant! Thanks
Incredible Software. Incredible Teacher!
Thank you 🙏🏼
Loft tool looks very useful thanks
very good looking at your videos and found them great I have learnt a lot
I have a question do you have a video explaining a solid object as i have made a clamp but it is not solid its like webbing and ideas
thank Rob
very cool wish i saw this when I first started!
Using the extrude tool how would you make like a "V" hull shape for a ship? Love your videos
Thank you very much wonderful video very informative if I draw few pieces is it possible to put all of them in a folder or a work envelope and recall each time I needed thanks
Wow excellent tutorial. Thank you
I was following along with the series, wish this video started out making those shapes you had in your design space. I was able to figure out the revolve tool, but moving into the sweep and i'm lost how you made that.. other than that I really was enjoying this tutorial
Great job explaining!!
Great tutorial, love the way you simplified things. I’m with chimp Alien on the revolved tool, more infect on the spline tool, how you create the profile? Thank you for great videos.
Great perspective!
Very resourceful!
This is awesome. Thank you !
An additional comment... get a SHIRT made and make some funds off this!! I would proudly wear it and would steer people that ask to your vids. :)
Hi, could you explain in more detail how you got the PATH function set up on sketch s,or if you have it on another video,i finally got it, but im not sure if i did it right, so is it you have to have the Profile on its own sketch on a Different axes than the PATH and near the Path ? Thanks
Great videos,thank you
Coming over from siemens nx, so far what annoys me most, that I don’t have the same shortcuts… came over for generative design though
Hi,nice video,very well done and excellent pace, how do you use the trim tool in sketch haven't seen anyone showing how to use it.
I cannot figure out how your making sketches on different Z heights, anyvids where you touch on that process?
create sketch, make circle, finish sketch, click on circle, right-click choose offset plane, enter distance to new plane from original. then click on that plane and create sketch, draw a circle then finish sketch. You will see that the circles are at different heights. You can also make a circle in sketch plane then use move tool and check copy and enter in the distance. This way you do not have to exit sketch mode.
I want to make a tapered cylinder. I know this can be done by creating two thin discs centered along an axis, then using the loft tool to join the space between them. Is there a way to do it using the cylinder tool and tapering while extruding?
You could create a cylinder, then select one end and scale it down?
After my post, I discovered that you could sketch a circle, then extrude it with a taper angle. Of course, you would have to use trigonometry to calculate the angle of taper and know the distance to extrude.
hey can you do this with some object that's been added I'm working on body parts for vehicles
Hi Justin, the sweep tool just refuses to work for me,the OK button sta's highlighted for whatever reason???? Great video thanks.
@TheFusionEssentials Great video, one question tho, so I made a word in 3D, I'd like to have it hollowed out but with the exact same values on all sides on the inside, how do I do this? Hope my question is asked the right way since English isn't my first language.
And if possible to have a background on the letters, a very thin background, so it's hollowed out but still you can't see through, because I wan't to fill it with something else. (Trying to make a LED letter sign).
Brother, Fusion vs SOLIDWORKS what differences?
hello and thank you for a great helpful video, i am having a problem on the PATH part, i follow you step by step but when i choose SWEEP" after creating a path line in sketch, all the same windows and parameters are set just like you have them but when i click on Profile on my circle and path for my line they get high lighted ok but,nothing comes up after that.?what could I be missing, Thank you
in 4.52 of video where you talk about how to make that; I'm sure I missed how to make that drawing. so I created a circle; that becomes profile, then the line drawing and when I selected the circle as profile, it didn't work. must have missed something. not sure how to rotate circle to make this; so it's at the right angle. the error I get is the path is tangent to the profile, try adjusting path or rotating the profile, I was like ?
www.youtube.com/watch?v=QimeZSqS_ so I figured out the problem with this other video of yours, thanks. I always get excited when it worked. the issue was being on the right Plane, to make it work; also had to adjust he sharpness of the curve.
I am trying to use the sweep tool to create a shaped bar. The cross section is 30mm x 5 mm and the path is a simple L shape. However when I select the shape and the path I see the OK box in the sweep pull down menu is still grayed out so i can't complete the command - anyone any ideas as to what may be wrong ?
Why this program keeps defeating me...
huuwatsap guys
So...so many issues with this damn loft along a rail. "Your profiles can't be coplanar"...wtf, why not if it's going to follow a rail?! "Your rail doesn't intersect with your profiles"...wtf the rail runs right through the middle of both? Make it touch the edges of both, nope. Make it outside of both, nope. Try to delete any of it to adjust, nope you can't delete anything while you're inside a sketch (and most of the time out of a sketch).
Is Fusion360 really this much of a steaming load of crap that it appears to be? I draw a thing...why can't I just select the damn thing and hit the Delete key? Nothing happens...it just unselects the thing.
These tutorials need to start from a COMPLETELY EMPTY design to have a chance in hell of understanding how to get to the point where you can even try to use the loft tool or whatever.
Not a fan of this video. I haven't went any further, but this video needs to be further down the line. All I did was scratch my head and skip.
In this video the example of the loft tool that goes around the circle from a circle to a square at 7:30, can you do that as a hollow tube? If so anyone know how or can direct me to info on how to accomplish it. TY in advance