Royal Enfield is on a roll. It has the following models up for launch in the next 12-24 months - Classic Roadster Shotgun Hunter Sherpa Scram Flying Flea and An Electric Motorcyle So looking forward to seeing your upgrades after they're launched. Also BSA will be launching its 650cc motorcycle by the end of the year.
I ordered many parts in this video. From past experience, I can’t stress the need for the adjustable kick stand when lowering the bike. Without it, the motorcycle will stand straight and fall over in a strong breeze.
I love your mods!!! Wish you did a mod for the Royal Enfield Interceptor 659 side stand. I would be happy if you just made a clamp-on or screw-on pad that doubled or tripled the contact area for sand or muddy conditions and maybe 10mm thick. I ride with ALL I own on my bike, very full 80L Givi saddlebags, tent, sleeping bag, computer bag, tools, etc, and I have to be so careful in picking a good spot to land that side stand. I will be your first order!!! Thank you for considering.
Hello, this is the three point fixing engine guard under part number 92808. It can can be seen on the following link: accessories.hitchcocksmotorcycles.com/accessory-shop/Engine-Protcation/40097
Is it possible to install the front indicators of Highness on Scram 411 and conty 650? And I mean proper installation so the amber light turns on with ignition as in stock CB350.
Great video! Does the replicator 30/20mm fit the Himalayan 2017? Your specs say 2018 on. Also, did you need longer clutch and brake cables? About to put my order in for risers and adjustable levers. Thanks!
@@johnmortison5763 sorry i'm not a very good english speaker. I get the 16 teeth gearbox, but what do you mean bore the thing out to 500 or 525cc?? To change the motor itself to a bigger one?
Royal Enfield is on a roll. It has the following models up for launch in the next 12-24 months -
Classic
Roadster
Shotgun
Hunter
Sherpa
Scram
Flying Flea and
An Electric Motorcyle
So looking forward to seeing your upgrades after they're launched.
Also BSA will be launching its 650cc motorcycle by the end of the year.
Good video but why are they so rare? A legendary name like Hitchcocks Motorcycles should make a video every week !!!!
I ordered many parts in this video. From past experience, I can’t stress the need for the adjustable kick stand when lowering the bike. Without it, the motorcycle will stand straight and fall over in a strong breeze.
BS4 models fell over in a breeze in stock configuration.
I love your mods!!! Wish you did a mod for the Royal Enfield Interceptor 659 side stand. I would be happy if you just made a clamp-on or screw-on pad that doubled or tripled the contact area for sand or muddy conditions and maybe 10mm thick. I ride with ALL I own on my bike, very full 80L Givi saddlebags, tent, sleeping bag, computer bag, tools, etc, and I have to be so careful in picking a good spot to land that side stand. I will be your first order!!! Thank you for considering.
Love this company!
Great vid. What is the engine guard on this bike, and does it protrude enough to protect the gear lever and rear brake lever when the bike's dropped?
Hello, this is the three point fixing engine guard under part number 92808. It can can be seen on the following link: accessories.hitchcocksmotorcycles.com/accessory-shop/Engine-Protcation/40097
Is it possible to install the front indicators of Highness on Scram 411 and conty 650? And I mean proper installation so the amber light turns on with ignition as in stock CB350.
Great video! Does the replicator 30/20mm fit the Himalayan 2017? Your specs say 2018 on. Also, did you need longer clutch and brake cables? About to put my order in for risers and adjustable levers. Thanks!
Does that higher windshield also fit the new 2021 Himalayan?
The Euro 5 windshield is different in order to accommodate the tripper navigation system, for these very latest models we are developing a new screen.
When do you think the Himalayan 650 will come out? Awesole video guys!
Probably won’t. Engine is too wide.
Hope I’m wrong. I just can’t see it happening.
Don't need it. Just bore the thing out to 500 or 525cc and put a 16 tooth gearbox sprocket on it and you're good.
@@johnmortison5763 sorry i'm not a very good english speaker. I get the 16 teeth gearbox, but what do you mean bore the thing out to 500 or 525cc?? To change the motor itself to a bigger one?
@@ricardverges630 boring means to take the existing cylinder and widen the diameter to increase the volume of the engine.
Touring seat- Ribbed for pleasure.
👍👍
200$ to ship to USA? Not happening
Make them available in India
We offer worldwide shipping, including India.
@@HitchcocksMotorcycles great, will order soon 🙏
love your stuffs but u r so costly in India
Пора уже всем честным гражданам выйти в центр Москвы с требованием прекратить войну против Украины.