YAMAHA FZR600 OIL CHANGE AND ENGINE RATTLE!
HTML-код
- Опубликовано: 14 май 2021
- Yamaha FZR600 Oil Change and can we find out what this engine noise is?
If you would like to support my Channel, You can check out my Amazon Wish List and buy something for the channel.
www.amazon.co.uk/hz/wishlist/...
Stuff I use.
My filming equipment.
Huawei P30 Pro :amzn.to/2CImtyA
Rode Wireless Go Mic: amzn.to/3h8WP5n
Boya external microphone: amzn.to/3g3zZv9
Tools..
DeWalt Drill and Impact driver :amzn.to/3g51C71
Wire stripper: amzn.to/3g6RUkK
US Pro Driver Bit Set: Screwdriver Bits Torx / PZ / PH / Flat Hex Spline Extra long Security 50pc AT822
Music creditited to Kevin Macleod www.incompetech.com - Хобби
It's good to see you two working as a team.
Glad to see the oil and filter change fixed the rattle...well done,what a team.
That sounds so much better, its shocking how low the oil was ...cracking video nice seeing you both work on a project ...
Cheers James 👍🏻
With the new oil and filter you and your dad have fitted you will of gave the engine a new lease of life. Nice job Gary and a great video
Cheers bud 👍🏻
Love the sound of the bike when it's runing. Sounds great when you rev it. Nice bike.
👌👌
Dynamic duo on top form! Great video Gary. Good to see you laughing!
Cheers Jonathan 👍🏻
Nice vid guys glad you sorted it💯
Love these bikes vlogs👌🏼✌🏼
G,day Gary love the red-neck strap fix .I am going to use that one ..Great vid as always
Gazz
Cheers gaz it works a treat 👍🏻
nice bit of work from the 2 of you, same as me when i bought my diesel car it had a noisy engine when i checked the oil it was really thick and really black and i was told it had been mot and a serviced by them i bought it from took it back they argued they had serviced it and it was not part of the warranty to do but once i mentioned the trade and standards they changed quit a lot and at the time they were really busy so they sent it to the local ford dealer and got a full ford service
Good on you nev👍🏻
It's good to see u working together
Cheers Andy 👍🏻
Thanks
Great work both of you. 👍
Cheers sd 👍🏻
nice teamwork and nearly there
👍🏻👍🏻
The smug look on Martin's face at the start 😂😂👍👍🏴
At least you have ruled out any potential problems.👍
Great you two are cracking together bike sounds sweet
Cheers Paul 👍🏻
Thumbs up gary great job 👍👍👍👍
You two crack me up haha keep the videos coming the pair of ya 💯👌🏻
Cheers Dan looking forward to seeing this kawasaki you got coming 👌
Nice one mate good job Gary 👍
Cheers Ali 👌
Nice one 👍🏻🏴🙋🏼♂️
Good team bike sounds good well done guys.
Cheers Gary 👍🏻
Gods stuff guys 👍👍👍👍
nice fix.
Top job lads 👌👍
👍🏻👍🏻
I remember when the carbs where out of balance a lot of 4s have a clutch rattle.
Sounds good to me Gary! Martin looked like a doorman at the beginning. ( not coming in this log cabin) 😂😂
🤣🤣
great vid , little tip for a basket holding tool , when you next change the clutch plates and steels , keep the steels and weld a little bar onto the face of it and then you have a free holding tool :) used mine for years now lol bugger paying top dollar for one :D
Good tip 👍🏻
Soppys back!
I have owned a FZR 600 for 12 years now myself they are brilliant bikes..
I love it 👍🏻
Thanks guys
👍🏻👍🏻
Oil filter is the same as for a Peugeot 107 €4 cheaper ,good video👌
Not enough oil in the system! My 1976 Honda 400/4 sounds like a couple of skeletons in a biscuit tin! Could be cam chain, but I was told ride it and enjoy it! 👍 which I do ! Nice video guys!
Cheers David 👍🏻
Man I loved working with my Old Man.
That was my idea 💡😅 bit worth a try and look..
You cannot beat the old school methods
👍🏻👍🏻
Great teamwork - keep visiting each others channels
hello friend, where do you find the engine speed sensor of this bike? Thank s!
Can't believe you're pulling funny faces Gary on your own video
😂
Nice one you pair! You are like the terrible duo 🤣🤣.... think your videos are brilliant when you are together...
Cheers bud 👍🏻
Hi try balancing the carbs some time that helps clutch rattle
Cheers bud 👍🏻
Getting like rectrorestor 🤣🤣🤣(just wen you starting to watch the video and getting interesting (he ses you dont have to see that🙈🙈🙈🙈🙈👍nice video
🤦♂️😂
There's the annoyance in your videos again mate. "Im only joking Martin"🤣
🤣
I wonder if the oil filter was from somebody else who had purchased your one, lubed it up ready to put on then realised it was the wrong filter so returned it only for you to be the next customer to buy it. 🤷♂️ Like you say, I’ve never seen that before. Top Vids from you both. Enjoy them immensely 👌
It had a peel back piece of plastic on top to stop it drying out 👍🏻
@@ProjectMan Oh right! Maybe they will all be pre lubed in future then. I’m waiting for a different oil filter to be delivered to me. I wonder if mine will have been pre lubed. Will soon find out. Again, top work 👍
Cheers bud 👍🏻
Atleast it's not done any lasting damage mate
🛢......just a drop of oil and she's running sweet...
thanks for the helpful video! which tool are you using at 4:48? is this a bicycle chain?
www.ebay.co.uk/itm/363604588016?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xSZY6EzUTxq&sssrc=4429486&ssuid=f1kh3VscQDC&var=&widget_ver=artemis&media=COPY
@@ProjectMan thanks mate!
Looked like Barry Sheene with his arms folded in the background!
🤣🤣
The FZs rattle a bit anyway.The rattle may improve with a carb balance.All the best.
Cheers bud 👍🏻
I have the same exact bike mine just started making a noise but I think ks its low what type of oil did you use
Hi bud I used 10w40 👍🏻
the thumb nail looks like The Driscoll Brothers...lol
Lol 😂
Hello lads will that fzr run on the E10 petrol do you know please
Iv checked on the .gov website and it says it will.
great video.....who is the bouncer looking man.....
🤣👍🏻
Dont forget to clean your nose Martin ( oil ) lol
Cool, glad its sorted. Just goes to show, some people talk the biggest load of @@$$&& when they say they serviced it.
both my fzr250 and fzr600 have a clutch rattle, pulling in the clutch when idling then the noise is gone. maybe its the same on your bike?, did you figure out what it was?
All I done was slight adjustment on the clutch leave and a oil change and seemed fine on mine 👍🏻
@@ProjectMan nice
result
Matin get out of the videos lol. Good job .
Cheers Pete 👍🏻
I can't believe you forgot the battery on the drill
🤣
Reverse spin the motor take the slack out
Balance your carbs they sound out of sync
Cheers bud 👍🏻
Let me guess he also said it was a lady owner lol
Lol no this one was his sons 👍🏻