awesome video how much does it cost for the whole build looking at rebuilding my yd25 soon shes done almost 400k and i want do get a rebuild done with more power
Awesome content mate. Looking at replacing my turbo unit on R51 pathfinder. Any advice would be appreciated. Keep up the great work. Thanks for saving me a small fortune .
Nice tutorial, hope u can make this tutor longer from the 1st, test and car ready to use. Maybe u can watch MFGAW Channel. MFGAW videos very interesting.
I own a 2014 D22 YD25 with 65,000kms. Its currently running a 3 inch exhaust, egr delete, booste tee running 18psi and it's been dynotuned - it's making 145rwhp and 360nms at the wheels. I'm wanting to push the power up to 200-220 rwhp. Considering a GCG TDX 14411 turbo along with a core flowed intercooler through ARE, a heavy duty clutch and potentially plus 30 injector nozzles. what are your thought's on doing these mods with a low k vehicle with out a double row timing chain upgrade or the ARP head upgrade. Also would you recommend a different way to go about getting to this power level. Thanks
No one makes after market rods for them. Next engine we will have custom rods made and a girdle. Diesel cast pistons are strong compared to petrol cars and are better for longevity
I have customers with 500 000km on our duplex kit. Nissan designed them with double row chains and only started having issues when they switched to single row.
@@ragebait988 the d40s are common to do heads but that's because the EGR pipe, heater hose plastic fittings, radiator top tank, oil cooler hoses break then they loose coolant and over heat. We have made parts to fix these issues.
following.. looking forward to the next update
any update on this build?
Yaay finally been waiting ages to see this glad you guys made a channel to share your work❤️
Nice one Daniel 417horse too gd.. just a request if you can show let is know whr PVC vavle is on a D22, could be on the pump maybe cheers anyway Big D
awesome video how much does it cost for the whole build looking at rebuilding my yd25 soon shes done almost 400k and i want do get a rebuild done with more power
It is safe to remapping navara np300 yd25 4x2 automatic, soon air filter & down pipe would replaced.
Yes
@@yd2532 what is the best remap tune for daily use i mwan daily driven how many BOOST PSI is safe?
How much does this sort of rebuild cost?
Que buen video carnal 👍
Awesome content mate.
Looking at replacing my turbo unit on R51 pathfinder.
Any advice would be appreciated.
Keep up the great work.
Thanks for saving me a small fortune .
I'f you're gonna get a bolt on turbo make sure you get something that uses genuine bearings. Gcg has standard and high flow options
@@yd2532 Cheers.
Will do .
Where to buy Titanium Retainer?
What benefits do the 4jj1 fuel pumps have over the vp44 pumps? I am currently waying up putting a qd32 in my ute as uposed to keeping the yd25
I reckon it's because you can get stroker 4j pumps but not yd25, not too sure
Nope he says in a later video it's worse 😂
Nice tutorial, hope u can make this tutor longer from the 1st, test and car ready to use. Maybe u can watch MFGAW Channel. MFGAW videos very interesting.
I want to buy this engine mate
I own a 2014 D22 YD25 with 65,000kms. Its currently running a 3 inch exhaust, egr delete, booste tee running 18psi and it's been dynotuned - it's making 145rwhp and 360nms at the wheels. I'm wanting to push the power up to 200-220 rwhp. Considering a GCG TDX 14411 turbo along with a core flowed intercooler through ARE, a heavy duty clutch and potentially plus 30 injector nozzles. what are your thought's on doing these mods with a low k vehicle with out a double row timing chain upgrade or the ARP head upgrade. Also would you recommend a different way to go about getting to this power level. Thanks
Ye you'll be safe running that. I've seen stock engine d40s running a little over 30psi and making 260whp
In the next couple videos we are gonna be testing a custom gcg turbo on a d40 aiming for around 250hp
@@yd2532 good stuff, so the yd25 in the D40 doesn't have any strengthened components over the yd25 in my D22?
Looking forward to seeing the vid.
@@johnsmith-yu6vi basically all the same just a different block
@@yd2532 hi, very keen to see this setup. How far off is the video? thanks
How much is it for a D22 2.5 reconditioned motor?
We do these for $6300 exchange www.yd25.com.au/index.php/services-2/reconditioned-engines
Daniel an you tell me if the 2008 is the same
D40 or d22
How did the build go, is it in the car now?
It's Getting tuned late August. I'll do a video for it.
@@yd2532 cheers👌
Why did u just use some cheap rods and pistons like scat or eagle ? Would have made the engine a lot stronger for not much extra money ?
No one makes after market rods for them. Next engine we will have custom rods made and a girdle. Diesel cast pistons are strong compared to petrol cars and are better for longevity
Hey mate if u dont mind me asking what did u do to fit a 4jj1 fuel pump
Just had to change a couple of the fitting on the pump
We’re can I buy one off your engine
Yd25.com.au
Are you going to be selling all these parts?
We sell most of the engine parts alot of the turbo stuff is one off custome made
Shame you don't share the same love for the ZD30....
The dirty thirty......
so this one doesnt have the balance shafts
Ye d22s don't have a balance Shaft
i got 40,000kms out of my Duplex kit. Scrapped the bucket of shit.
I have customers with 500 000km on our duplex kit. Nissan designed them with double row chains and only started having issues when they switched to single row.
@@yd2532 how many heads have they been through in that time? They’re only good for 100,000
@@ragebait988 the d40s are common to do heads but that's because the EGR pipe, heater hose plastic fittings, radiator top tank, oil cooler hoses break then they loose coolant and over heat. We have made parts to fix these issues.
What kindof turbo is that?
gtx2860 gen 2. Gonna be doing a video about the single turbo set up soon
How much moding did you have to do to the fuel pump and do you have to change the injectors after the pump change?
fuel pump just had to change fuel line fittings, the tuner is gonna decide the injectors but will talk about them in a future video