1GR-FE V6 4.0L Engine VVT Variable Valve Timing Oil Filter Location And Cleaning Of Toyota LC
HTML-код
- Опубликовано: 27 авг 2024
- 1GR-FE V6 4.0L Engine VVT Variable Valve Timing Oil Filter Screen Location And Cleaning Of Toyota Land Cruiser 2008
#MayoCarsDR
#1GRv6Engine
#VariableValveTimingOilFilter
VVT-i Control Valve Oil Filter Replacement Of Toyota FJ Cruiser 1GR 4.0L Engine
• VVT-i Control Valve Oi...
1GR engine rebuild
• (Part 1)1GR V6 4.0L En...
1GR engine disassemble
• 1GR-FE V6 4.0L Engine ...
1gr engine rebuild repair manual 📚
• 1GR-FE Engine V6 4.0L ...
1gr V6 4.0L engine rebuild repair manual 📚
• Toyota V6 4.0L 1GR Eng...
1gr short block inspection and firing order
• 1GR-FE Short Block Ins...
I cleaned the VVT solenoid + filter , result : the engine running much smother also the ticking noise reduced , highly recommend to Do this type of maintenance in 1GR engines
Would prefer to see this on an intact engine in the engine bay. Never gonna have my Toyota heads off just to clean the vvt filter.
You don't have to pull the motor and/or heads. He showed them to us while still in the car. Passenger side is always accessible and it looks like if you remove the alternator you can get to the drivers side just fine.
Thanks for teach me how it done, I have 1GR v6 and will do it myself
Ok,
Thanks for comment
Thanks for the video if I would have known about this I'd probably still be driving my truck instead of looking for a new engine, also would it be possible to take a 1gr-fe out of a 4runner an put into a tacoma?? Or should I stick with tacoma to tacoma
The engine of the Tacoma and the 4 Runner is the same except for some parts from the outside, such as oil pan, etc.
To clean filter on drivers side, loosen belt then remove alternator bracket?
Thanks for your video. I have a 2006 Tundra with the 1GR-FE and 181,000 miles on it. Probably a good time to take a look at them and replace.
Yes
Thanks for comment
I pulled and replaced my VVT filters and the VVT valve. Still getting a P0022 code. At least I know they are not the problem.
WOW never knew. Thanks I just learned something new.
Thanks for comment
Awesome 👌 information. At what intervals should these filters be cleaned. Many thanks 😊 🙏.
👌👍🤘😎🇦🇺💯🍻
If you do your engine service on time, you don't even need to clean it
@@MayoCarsDR Many thanks for your response. 🙂
Very informative video thanksssssss
You welcome
Damn it gotta remove the alternator to get to left side
Oh man, Thank you!!!!!!
Thanks for comment and you welcome
Nice
Could you make a video or let me know where the vvt solenoid filter is on a 1UZ-FE I can’t find information no where other then if I understood correct it’s in the valve cover area
Send me your car vehicle number
I think the word you're looking for is "screen" not filter. It would only require cleaning on an engine the doesn't get maintained well.
هل لك ان تدلني على خلل p0340
ارجو الرد وشكرا
P0340 Causes
A defective camshaft position sensor.
Damaged or dirty reluctor ring on the camshaft.
Defective, corroded, shorted camshaft position sensor circuit wiring.
Defective, corroded, shorted camshaft position sensor circuit connector.
A faulty crankshaft position sensor.
Stretched or misaligned timing components.
شكرا لتجاوبك
انت افضل صانع محتوى لتجاوبك مع الناس
شكرا لك
Good information sir
Can I clean it like that when the engine still in the car ( Do it like normal service)
Thank you for the video 😊
Yes
ruclips.net/video/hYrFXzUthDQ/видео.html
Thanks for comment
Tanks
How dirty would that filter have to be to throw a p0022?
Same code I got tryna figure out how to fix it
@@6passfillet788 Mine turned out to be a stuck Oil control valve. If cleaning the filter doesn't work pull the Oil control valve. I hooked a 9v battery. Just touch the lead for a sec don't hold it on there. You should see the valve move. If it moves you can try to clean it and reinstall. If it don't move it may be bad.
@@joyroc885 I removed the ocv screens and they were super clean, then I removed the oil control valve itself and cleaned it well with parts cleaner while actuating it with a 9 volt. Cleared the code but it came back
@@6passfillet788 You can ohm check the oil control valve. Think it should be between 6.9-7.9 ohm. If your oil is little old you can change it and see if it clears.
Thanx
You welcome
كم لتر زيت محرك تيوتا هايلوكس V6
Without filter 5L
With filter 5.4L
i changed then sensors codes went away
took it around block
was leaking alot of oil where can it be leaking
How can I tell you where the oil leak is coming from without looking, maybe a wall cover gasket leak, a timing chain cover leak, a front seal leak?
hey bro yeah it is on the back side of engine i would only thing the seal or the top or bottom oil pan thank you !!
Good
What is the best viscosity for this engine, the temperature may reach 50 in summer
5w-40
Here in the US I have the same 4.0L V-6 in Tacoma and I stick with 5W-30 Full Synthetic Motor Oil. I change it every 5,000 miles or 6 Months, which ever come first.
كم لتر زيت يحمل محرك تيوتا هايلوكس V6
💪👍👍👍
Nice