Kenmore Gas Dryer 400 Series model Take Too Long To Dry part 1
HTML-код
- Опубликовано: 10 сен 2024
- Kenmore Gas Dryer 400 Series model 110.77422600
Link to Part 1 Dryer Take Too Long To Dry: • Kenmore Gas Dryer 400 ...
Part 2 Dryer with no heat: • Kenmore Gas Dryer 400 ...
Problem:
Dryer Take too long to dry. Got heat when turn on and running but when it finished, the cloth is still too cool to touch.
After replaced the 2 gas Solenoids and clean out front and back areas including vent duct and blower motor casing,
it's still not working. Seem like cooling cycle kick in too early and stuck in that position.
When heard a buzzer, immediately open the dryer door and feel no heat, just cool clothing.
Test or checking::
Dryer Ignitor on, got flame. Check the following for continuity:
1. Cycling or Operating Thermostat (4 pins)
2. Thermal Fuse
3. Thermal Cut-Off Fuse
4. High-limit thermostat
ALL are good.
Solution: Blindly replaced Cycling or Operating Thermostat (4 pins), Thermal Cut-Off Fuse, and High-limit thermostat on the back of the dryer and the problem is solved.
Parts replaced in the video:
Kenmore Dryer Cycling or Operating Thermostat(4 pins): Genuine OEM Part # WP3387134
Kenmore Dryer Thermal Fuse 195-degree F (White):Genuine OEM Part # WP3392519 (did not replace since this part since it's still good).
Dryer Thermal Cut-Off Fuse Kit W11050897
The kit includes the thermal cut-off fuse and the high-limit thermostat.
(Dryer high-limit thermostat Part #3403140: The manufacturer no longer makes this part)
Top Dryer Lint Duct Housing Seal WP339956
Bottom Dryer Lint Chute Seal Seal 26 in Genuine OEM Part # W11415783
or
Foam Tape (I bought this at Home Depo):
side 3/8" X 3/16 x 17ft long or 9.5mm x 4.8mm x5.2 meter long
Tools:
1/4" nut driver or socket
Philips Screw Driver
Testing: Ohm meter to check for continuity
Safety:
Wear Glove
My Videos collection:
• Repairs
2010 Civic Repairs:
• Civic
2004 Odyssey Repairs:
• Odyssey
2017 Prius Repairs:
• Prius
Other Repairs (PC,Stove,Dryer...):
• Other repairs
Thanks!