how would you go about mounting the go pro to a motorcycle helmet. But stretching out the components to create a low profile mount. E.g. having the battery pack at the back motherboard on the right and camera at the front.
20:40 LOL! Great video thanks. Do you know how to remove the inner lens? With the 7-6-5s was really easy, with the 9-10 I haven’t been able to unscrew it.
Question, I bought a naked gopro 10 that came with the original Back screen to be able to make the conexion beteen the naked Gopro and my Cellphone, but not sure where to connect the back screen. please help.
Hi there, I decased my hero 10 but i think I broke the rear LCD Screen because now is just black, but the camera is working fine, recording, changing settings using the QR but the fron screen is not on, I turned it off just before decased and now I don't now how to turn it on again.... What can I do?, or this mean that I broke both screens?
I got the nameless rc naked case for my hero 10... Where did you get the ribbons and Bec board that works with the hero 10? Thx man and happy new year!!
Thanks for the video. Honestly, this is top. But is it possible to unscrew the lens itself, like if I would like to replace it with linear for better quality? I tried that with H9B but it looks like it is no longer removable by simply unscrewing it?
I tried doing that with gopro 8, i found that the lens and the sensor is glued into a single piece. No way I can pry them open. Wasted good money on a good working gopro 8.
@@reedtan but my GP 6 - works best. but there is a jittering when on bike. So best to do custom lens would be in gp 7. or you can record in GP10 5.3K and that in linear will give you almost true 4K
I smacked my GoPro into a pipe on my drone no screens are cracked but it won’t turn on or off and the battery was almost stuck inside it. Do you think I could do this naked mod and it would possibly work again or should I just say f it
What about the issue of hero10 not wanting to turn on without a battery connected at first ? i got the iflight gopro-balance cable. but i have to install the battery and the cable before i turn it on, and then im able to remove the battery..
@@WestPsyde i got it to work! i wasn't my connections.. it seems like its a power problem, if i power it from the balance of my 4s with the iflight balance to usb c ( usb c cut off and soldered on instead) it wont turn on properly,but ive tested powering from the xt6o of the same battery and then it works? any tips ?
cool .. whats the weight of this at the end ? .. and are you planning at all to provide such a thing from droneco ?:) .. like if someone buys a 10 with it for you to make naked?.. also does it work with the 9 too? respect..
@@WestPsyde cool cool also can we power possibly from the balance lead? and what kind of effect will that have on flight time? on say a 6S droneco slammed squirt?
I don't know what's the problem... the screen display starts ok...but the camera it doesn't start recording ... long and short press recording buttons ... it doesn't recording
thanks for your explaination. I have a question. I follow the way you tear down gopro10, and I finally made it. but my naked gopro says power is low. do you know why my gopro shows that sign?
@@WestPsyde I did load last update still I got this massage.....I press the Rec button the massage disappear ..I press the record button again no effect it doesn't start record
Weight matters when you are flying music festivals over people. Bones is too heavy for that. And I'm runnin naked hero 12 now need that 10 bit. No bones 12 sorry
@@WestPsyde Yeah no i just said that bc my friend who flies FPV bought it and said its perfect for FPV so yh I guess thats for him and everyone has their preferences
The easiest answer is that they don't bother repairing it to begin with. Asked about a hardware issue with the USB-C port and they just said to buy a new one.
The “little magnet thing” you pulled out is the speaker.
how would you go about mounting the go pro to a motorcycle helmet. But stretching out the components to create a low profile mount.
E.g. having the battery pack at the back motherboard on the right and camera at the front.
20:40 LOL! Great video thanks. Do you know how to remove the inner lens? With the 7-6-5s was really easy, with the 9-10 I haven’t been able to unscrew it.
Where does the SD card go?? or how do you transfer footage to your computer??
is there any record time limitation or record stop problem? thanks
Question, I bought a naked gopro 10 that came with the original Back screen to be able to make the conexion beteen the naked Gopro and my Cellphone, but not sure where to connect the back screen. please help.
That thing you said you didn't know what it is, that is the speaker. Is it still waterproof?
/s
Hey, do you think It's possible to replace a camera sensor bus with a longer one? Thanks
Currently have buddies trying to get them produced i promise ill post here if they become available
@@WestPsyde awesome, thanks!
@@WestPsyde One more question: is that theoretically possible to have one camera sensor connected to 2 gopro boards at once?
@@WestPsyde hey, any updates on the extended bus?
Can You do the settings via this 2 small buttons behind?
is the lens a threaded m-12 or is it one piece? thx boss
Hi there, I decased my hero 10 but i think I broke the rear LCD Screen because now is just black, but the camera is working fine, recording, changing settings using the QR but the fron screen is not on, I turned it off just before decased and now I don't now how to turn it on again.... What can I do?, or this mean that I broke both screens?
Great tutorial! thanks!. QUESTION: are you still using it without FAN? any problem?
I got the nameless rc naked case for my hero 10... Where did you get the ribbons and Bec board that works with the hero 10? Thx man and happy new year!!
Hero 9 Nameless BEC comes with ribbon
@@WestPsyde can you make a video talking about the usb c output resolution and the lag, I want make a dual gopro AR camera for VR headsets
@@WestPsyde I ideally I would want 2.7k 120 fps, and very low lag, idk if this possible
not enough power error screen? hooked up to 6s battery leads. and checked with multimeter getting 1.3-1.4 amps.
Latest gopro labs?
Me too same error! Did you solved?
@@bboyriskio should use beta labs 1.20 or official 1.2 version. It works
@@PierreFPVar yes i find solution, thank you
do you just control the GP settings with the gopro app after this mod?
Thanks for the video. Honestly, this is top. But is it possible to unscrew the lens itself, like if I would like to replace it with linear for better quality? I tried that with H9B but it looks like it is no longer removable by simply unscrewing it?
I tried doing that with gopro 8, i found that the lens and the sensor is glued into a single piece. No way I can pry them open. Wasted good money on a good working gopro 8.
@@reedtan I think 9 and 10 are glued. But I thought you could unscrew lens in 8. Didn't know that. sorry.
@@reedtan but my GP 6 - works best. but there is a jittering when on bike. So best to do custom lens would be in gp 7. or you can record in GP10 5.3K and that in linear will give you almost true 4K
how can i buy this fream and matherboard?
can you help me?
I smacked my GoPro into a pipe on my drone no screens are cracked but it won’t turn on or off and the battery was almost stuck inside it. Do you think I could do this naked mod and it would possibly work again or should I just say f it
Do you know what the fan is that many people use?
What about the issue of hero10 not wanting to turn on without a battery connected at first ?
i got the iflight gopro-balance cable. but i have to install the battery and the cable before i turn it on, and then im able to remove the battery..
Latest gopro labs firmware fixes that
@@WestPsyde and i guess that firmware also help on my regular gopro 10?
Hello, i have a problem. Not enough power - gopro 10 black :/
i have these issue, not powering with lipo4s 1.5a it says it requires at least 2A to power in without a battery... have you found any solution?
@@leo_dron using an older software helped me
@@marcinogiego5005 wich one?
@@leo_dron should use beta labs 1.20 or official 1.2 version. It works
My naked GoPro 10 doesn’t record sound. Is it supposed to?
Question... What are you doing with the lens/filter mounts after you've completed your tear down?
You don’t run a fan ?
Have you had any issues with this BEC? Mine worked all day yesterday and now it randomly wants to work.
my screen clearly gets power but everything is black and camera wont work.. any ideas ?
Check all cable connections reseat them if necessary
@@WestPsyde i got it to work! i wasn't my connections.. it seems like its a power problem, if i power it from the balance of my 4s with the iflight balance to usb c ( usb c cut off and soldered on instead) it wont turn on properly,but ive tested powering from the xt6o of the same battery and then it works? any tips ?
Do you sell the mount for this naked GoPro and the Iflight 85? Thanks
If I don't have one I can make one email me dronecoproductions@gmail.com
Great video! Very helpful! Thank you!
This bec can work with 6s battery?
cool .. whats the weight of this at the end ? .. and are you planning at all to provide such a thing from droneco ?:) .. like if someone buys a 10 with it for you to make naked?..
also does it work with the 9 too?
respect..
Yessir! And I have decased gopro option available on the site
@@WestPsyde cool cool also can we power possibly from the balance lead? and what kind of effect will that have on flight time? on say a 6S droneco slammed squirt?
Very helpful, thank you!
I don't know what's the problem... the screen display starts ok...but the camera it doesn't start recording ... long and short press recording buttons ... it doesn't recording
Check all connections
@12:43 the speaker
still dont get wheres the Sd Card in ?
Exactly where it did before card slot is attached to motherboard
I needed this! Thanks for putting this together! Have you had any issues with the 10 overheating?
I haven't ran it much yet just been building them, but this one is for me so I'll report back but I only need a few minutes at a time so who knows
Any issues by now ?
.5 hex driver for the lense
Say I broke my back screen and the camera won’t turn on. Will it work if I tear it down or is it most likely broken
I would like to know this too :)
@@OnnieKoski no need the back screen...what we need from.the camera...the internel board + front screen+ the lens
That’s what she said 😂
😅dumb ass😅
GoPro lady flaps ... bwahahaha
I stripped the screws on my lady flaps 🤖
thanks for your explaination. I have a question. I follow the way you tear down gopro10, and I finally made it. but my naked gopro says power is low. do you know why my gopro shows that sign?
Load latest labs firmware
@@WestPsyde Oh! I didn`t updated firmware. I made it! thanks to you!!
Hey, I have the same problem. Where can I download it?
@@WestPsyde I did load last update still I got this massage.....I press the Rec button the massage disappear ..I press the record button again no effect it doesn't start record
You couldve just bought the hero 10 black bones..... for way cheaper.........
Weight matters when you are flying music festivals over people. Bones is too heavy for that. And I'm runnin naked hero 12 now need that 10 bit. No bones 12 sorry
@@WestPsyde Yeah no i just said that bc my friend who flies FPV bought it and said its perfect for FPV so yh I guess thats for him and everyone has their preferences
ngano imo na gihiwa doi oi sakit kaau sa mata
lmao do they seriously cut gopros apart at the factory during a repair? There has to be a way to open it without cutting its dingdongs off....
Nope but it's how I and many others do it.
The easiest answer is that they don't bother repairing it to begin with. Asked about a hardware issue with the USB-C port and they just said to buy a new one.
20:37
you are siraniko