Barton Shifter complete Install - Dodge Challenger Scat Pack
HTML-код
- Опубликовано: 25 авг 2024
- This is a LONG one, start to finish the full Barton Industries Shifter install. My family gave this to me as a Christmas gift and as an added bonus I got the Speed Dawg Rally Series Shift Knob for my Birthday. You can do this!
UPDATE: You will notice in my video I installed the rear bracket with the screws facing the rear. I contacted Barton regarding this and their response "We actually recommend to put the screws facing the back of the car. We never updated out install packet. Keep the shifter the way it is"
UPDATE 2/5/2019 Thanks to: Dana Hirschberg Music
"Called Barton and spoke to Joe today about which way the bolts should face on the rear bracket. Turns out either way is right, it's all bout how much noise there is in post of the install. He said to always start with the bolts facing forward. Then if you have excessive noise put it facing rear. If noise persists then loosen the rear bracket pan bolt and wiggle the shifter to get it to sit in a more neutral position, then tighten the rear bracket pan bolt back up. If noise persists they will send out a special foam piece that will finish off the job. Additionally he noted that putting this shifter on 5 different cars with the same make and model will give 5 different results. The trick is to not install the shifter stiff, but wiggle it around during and after you tighten the bolts. This will allow the shifter to fall into the most neutral and loose position giving the best performance and low noise result.
Also for those who are interested in putting a SpeedDawg ball on your Flat Stick the thread size is 12mm x 1.25 and if you want to buy a different color Flat Stick with engraved color it's $80 shipped with a matching ball."
Links
Barton Shifter: www.bartonshif...
Speed Dawg Rally Series: www.speeddawg.c...
Speed Dawg R/T Rally: www.speeddawg.c...
Barton - Challenger Shifter: Thread size 12mm x 1.25
Speed Dawg Thread Chart: www.speeddawg.c...
Enjoy...
~*~*~*~*~*~ Folow us ~*~*~*~*~*~
www.workplaydri...
/ workplaydrive
/ workplaydrive392
/ workplaydrive
-**--**--**--**--**--** Music Track by *--**--**--**--**--*-
Licence:
Dj Quads - Here I Go Again (Non-Copyrighted Music)
Published on Feb 7, 2017(19 days ago)
●Soundcloud - / aka-dj-quads
●Instagram - / djquads
●Twitter - / djquads
I don't own a Barton shifter kit, I don't even own a Challenger but I gently pressed that like button for the rainbows the 'R' stands for! :)
Pinned - Best comment so far :)
Work Play Drive That scene literally made my day.
I hope you have a great day as well! :)
:) Thank you That kid makes my day regularly
I gotta' good chuckle outta' the Lad's comment too.😁
Look at that. 6 Years later and this video is still being used. I, myself with 6 years in this industry found this video and it made the job effortless.
Thank You 🫡
I installed this today and I am literally blown away with how much better it feels. And now my shifter is adjusted to exactly my arm length which makes all the shifts absolutely perfect. You video made it a breeze and I had it installed and adjusted in about 2 hours, so just want to say thanks a million for documenting and sharing here 😎👍
Thank you for dropping the kind words 💪
Gonna have to watch this couple times then get courage to do this plus the 500 bucks lol
It’s definitely worth it, something I enjoyed every time I drove the car.
I remember doing this install and watching this video while doing it with my dad a few years ago on our ‘18 T/A 392, and how helpful the video was, and how thankful he was for it. I remember him telling me to leave a comment and say how helpful the video was, but I never did, so I figured I would now. He has since passed and he didn’t get to drive a ton with the shifter on, but I am the only one who knows how to drive manual in my close family even though I only got my permit a few months back, so I take it out a few times a week with my mom. The shifter feels great and the throw is incredibly short, and would definitely say it’s a very worthy modification. Thank you again for this video it was a savior during the installation.
Sorry for the loss of your dad, I lost mine a few years back and I was so thankful for the time I had with him working on our cars during his last few years.
Enjoy the car and the memories. I’m glad I was able to help you guys out 💪
I really like how you walk the viewer thru the process step by step......you make it seem doable for anyone. Great video.
Thank you, for this one I felt keeping it long was best. I was really putting it off for fear of damaging my interior only to find it truly was do able without any lasting effect... Except an awesome shifter of course...
@@WorkPlayDrive 5 years later... your video helped me over come that same fear! Installed mine yesterday and love how it enhances the driving experience😎👍🇺🇲
💪 this is still one of the modifications that had the biggest impact.
WOW! A rare individual who walks you through an actual install! Great Job! I will be using this as a reference for my Barton upgrade! Thank -You
Thank you, one of the things that really helped me in making videos is taking note of all the issues I had trying to find good install videos myself. You will enjoy this upgrade, The Barton is totally worth the $$ and effort to install.
Just installed the Barton in my 2015 Scat Pack. Your video was spot on and far superior to any others I found. You covered everything from beginning to end and definitely saved me a bunch of time on the install. As it was it took me 5 hours, but I'm a bit OCD myself. The manufacturer included no instructions with the shifter and their install video was low quality and did not help at all, but then in was for earlier year models. As excellent as their product is ... and it's fantastic! ... they really should update their video or better yet insert a link to yours! I expected that right side pin to be the toughest problem ... and it was exceptionally difficult ... and so was getting that 10mm bolt out due to the Loctite ... but I actually spent more time trying to get that round rubber boot to stay properly in place when put over the shifter block! Again, outstanding video and commentary and I highly recommended it to any contemplating this install. Kudos!
Thank you, I'm glad this helped. I did see a lack of info on this when I was researching the Barton so I tried my best to put out a detailed stable cam install. The only thing I was lacking was some grease for those pins ;) It's definitely a great product and has helped my times on the 1/4 mile quite a bit. I was a little nervous about the investment, but it's proven itself very nicely.
You summed it up! Just installed on my TA 392 and those were all the same problems I had. Right pin and getting the boot to stay still lol.
Robert Lugo 👍
Hey just wanted to say thank God for people like you with the patience you have and skills to teach as you are working - it truly helps the rest of us out that want to do things like this - great job on all your install video's and again thank you ...
Thank you, I appreciate the kind words.
As much time as we spend shifting, the Barton is a no-brainer. It makes the car SOOO much better. Well worth the admission Price. Thank you a million times over for your video. I've installed many shifters, none as difficult as this one. Your video is the best install video online for this mod. Period. Thank you!
Fantastic video. Step by step install. I just installed a Baton Shifter into my 2017 T/A 392. This video was spot on. Thank you for making this video!
You saved my bacon since Barton didn’t have squat for install instructions so far as I saw on their website!
Thank you, glad to help💪
Doing my 2022 challenge. There are some very minor differences. This video saved me so much time and aggravation. I don't know if I could do it without it. Thanks for one of the best instructional videos I have ever seen.
Thank you I appreciate the kind words.
I'm so glad you put this video up. I just bought the last year Challenger Hellcat on Saturday and put 700 miles on it right away. It can really use a better shifter and I heard the Barton was great. I'll be getting one in the next month! Thanks for the tutorial
Thank you and congratulations 🎈
I have no doubt you will love the drive even more with the Barton installed. 💪
Soo I was driving and out of nowhere I had no gear shifter. Just all slush. I later realized I could kinda slop it into gear if I was really careful.
Well I finally pull the shifter and the 10mm bolt and both clips had broken off and jettisoned out. Idk how this happened but I'm sure glad I didn't keep driving it like that. Jeeeeze. This video is a life saver. Literally
thanks so much for the video. i knocked mine out last night in about 90 mins. No scratches, no snapped clips. for some reason after watching you explain how to work with those pin locks, they were very easy for me to get both off and back on. 🤘
Thank you, those can be a pain of you're not sure how they work, glad that helped you out.
I just installed my Barton shifter in my 2016 Scat pack. Using your video.. it went flawlessly. Great job on the video. That passenger side pin it tough but I finally got it. Thanks for the fantastic video.
Awesome 👏 and glad to help.
A great walkthrough of the process. Your calm voice and your down-to-earth-behavior made this very enjoyable to watch! Contrary to a lot of other Muscle Car related content.
Thank you! I plan to install one next spring and with your help I should do just fine!
Thank you, Glad to help
My Barton shifter came in today and easily installed it thanks to your help, loving it and is just as you said “night and day difference” thanks for the recommendation and the video guide made it a breeze.👌🏼
Glad to help 👍
Just installed my Barton shifter. Watching your video helped me understand how to get the console apart without breaking anything. The right side pin actually wasn't too bad. Had more trouble getting the gasket to stay in place on the cover while trying to get it over the shifter assembly. You probably already know about this, but in case you don't- the problem Dan Kowalchick mentioned 4 months ago about Allen bolts is a revision Barton made to the design of the shifter. It now allows for a fore/aft adjustment in addition to the left right. Took my R/T Shaker out for a test drive and OMG it is a night & day difference.
Thanks for an excellent video and keep them coming.
Glad it helped, I met up with the Barton guys over in Texas at We are Mopar and saw the new design... Looks like I've got another upgrade planned for the winter :)
Just got a Barton for Christmas and about to start this process right now, thanks for the good video man! Also Barton finally had colored shift sticks again for anyone who was waiting for them to come back!
Thank you and I’m glad they brought them back. I kept mine for my next challenger just in case 😏
Finally! After wading through 5 other install videos (including the Barton video), they were all for pre-2015 Challengers with the plastic retainer for the boot. Finally saw this one, and cutting that o-ring worked great! Yeah, with the leather that thick, you can't work the boot all the way down, but I see that yours fit they way it did on my 2018. Great tip!
Thank you
Mine just come in yesterday. I went through like 3 videos before I found yours. Bro I was so nervous and you took all the nervous away. I’ll be installing tomorrow. Also definitely gonna check your channel for and mod videos before checking anywhere else. Thanks dude!
Thank you, I had the same issue finding a good video, this was what drove me to make this video.
I just saw this video the part starts at 43 min in. Your explanation and your patience speaks volumes. You're awesome my friend.
Thank you, It's been so long I had to go back and re-watch ;)
Just bought my 2015 hellcat a month ago and already noticed the shifter would be a problem. Watched a couple videos and I think you have the best Barton install guide, I will be ordering mine in a month and using your video to take me to the promise land. Thank you!
Nice you won’t be disappointed.
Installed mine last weekend. Fitting the metal plate with the rubber Barton bushing over the shifter was a pain in the ass! Thanks for the video, It took the guess work out of everything.
glad to help, how do you like the shifter?
Work Play Drive
Love the shifter, the knob is terrible. Gonna order one of the SpeedDawg knobs. You’re right about Barton needing to team up with them. You still rockin the pistol grip?
Agreed 👌
Father’s Day 2023 brought me a Barton…. Great installation video. Thanks for doing this - you couldn’t have explained/demonstrated any clearer.
Thank you and happy belated Father’s Day
Hey work play drive! I just did the install and to say I was extremely nervous was an understatement. As I'm not very mechanically inclined I was scared as all hell. The install took me about five hours with watching your video and pausing after every step. Needless to say I got it done and I'm as happy as can be. I also want to thank you for showing off that rad shift knob. I ended up ordering one as well with the scat pack logo on the side and the two rally stripes. So again I really appreciate you and your videos on youtube they've helped me tremendously. I'm forever grateful man thank you very much kind sir!
I'm glad I could help, I am mechanically inclined however there is a certain fear about taking apart the car you love. After about a year of ownership I just started experimenting and putting up videos in hopes that others would see the work ahead and maybe have the confidence to tackle it themselves. It's nice to hear it's working :)
Seven years later and this video is still RUclips gold! Thank you, my friend! A few minor differences on my '23, but overall, still the best on the net!
Your video helped me out a lot! This is probably the only video that is out there for current manual challengers. They’ve made some cooler revisions on their latest model. Now the part where the shifter sits can be adjusted forward or backward too.
This video is fantastic. Thanks for taking the time to make it. Barton short throw shifters are badass! Took me about 2.5 hours total.
Thank you glad to help 💪
Love the video. Someone with no mechanical skills could watch this video and complete this swap.
Thank you, that was the goal to encourage the beginner to tackle this themselves.
Im a mechanic u need a little skill. U made it look easy.
I just finished up switching out my stock shifter for a new Barton thanks to your video. It was the reason I considered switching and pulling the trigger on getting one. The swap definitely was a pain in some areas but following along with your video certainly made it easier. Funny thing was that right side pin was the easiest part for me. It just slipped right in after struggling for 5 minutes with the left one lol. But thanks a lot for putting this video together. Also, thanks for the speed dog reference as well. I got a nice scat pack shifter that matched up perfectly.
The Barton Speeddawg combo is so Awesome and glad it helped.
Outstanding video buddy, literally followed it step by step and threw one in my 21 scat pack shaker. What an upgrade, thanks for the assist!
Glad to help.
Received my Barton yesterday and just installed, took about 2 hours due to your awesome video, thank you so much, really is a huge difference than the original shifter.
Awesome 💪 glad to help
Just wanted to give a big thank you! Just finished my Barton install and your video really helped me a lot. I know you put some real work into making it, and I very much appreciate it!
I installed a Barton on my 2015 Scat Pack using these instructions. Thank you! I think this is the best install guidance on RUclips. One thing I did different that is useful - rather than trying to jam my fingers into the tiny opening on the passenger side on the shifter base to install that pesky pin, I used a set of long needle nose pliers to grip the pin, put it in place, and start seating it. Once I got it started I used my hand to finish pushing the pin in. Anyway, thanks for the video. I miss your Scat Pack, I know everyone wants a Hellcat eventually but the Scat is a pretty solid in drivability, cost, and performance. I’ve subscribed to your channel, there are still a lot of good helps there.
I miss the scat pack too. My next challenger will be a manual 392. 🧡
I was eyeing one of these and just did the install today, holy cow it really does reduce the shift throws, but now the whole thing feels like a very precise mechanism. Overall love it. The tip for pulling up by the cup holders was awesome, as I also hate trim removal tools.
Hot tip for you, this is something I tried during the removal process (see around 14:15 on this video). To get the second pin out, the one on the right, I actually lifted the whole shifter mechanism and moved it up and forward out of the way. This lets you get at the pin from underneath and there's a lot more room to get your hand in there. Made it a lot easier for me, there was no way I was getting that pin out otherwise.
This was also just preference, but when it came to removing the center column, I just lifted it out and set it in the back seat, with the passenger seat angled forward.
Thanks for the video, excellent walk through!
Just completed this install two hours ago. Thanks very much for the video! I wouldn't have attempted this without it. Barton's super tight when shifting, still have my leather boot cover off for adjustments, you can here a lot more engine grunt without it! Also installed the skip shift delete at the same time using your video. Thanks again!
Overall you will hear a little more sound from that area once installed. But nothing loud enough that bothered me for the 3 years I had it.
Just installed mine, i remember seeing your video 2 years ago and thinking i might not be able to do it but i just installed mine today and after rewatching your video it really is easy. Thabks for the help. Sure this video will keep helping others like me.
Thank you
well spoken, greatly explained, well done. thanks.
Thank you
Work Play Drive I received my Barton a couple of days ago and was looking around for some install videos when I ran into yours. Your how to was on point. Easy to follow. Boy, what a HUGE difference with this shifter. Thanks for the great videos! Liked and subscribed! 👍👍👍👍
Thank you and glad to help. Barton was an awesome upgrade to my car.
Watched this about four times. Ordered Barton Shifter, and Speeddawg Black Carbon fiber shift knob for my 2021 ScatPack Widebody.
Awesome video. Very well done. Probably will watch one more time before install.
Thank you 😊
I have a Barton and plan on swapping it out tomorrow morning. This video helped me decide to pull the trigger on it. Thanks and subbed. I can say aside from how it performs that it is a beautiful piece of engineering and machining.
Glad I could help and I agree it's is one beautiful piece.
@@WorkPlayDrive After installing it, I have not missed a single shift. I advocate for this shifter.
Seriously, I guess I could have installed this without the video - but why? Your walkthrough made it a piece of cake. Thanks and great job.
Thank you!
Had the original prototype when they first hit the scene. Blows away Hurst. The shifts are positive and complete and makes owning a 6 shooter all the worth while. You will not destroy this shifter, period.
Great job all around. So far your videos have influenced my purchases, and made them easier to understand and install.
Glad to help in some way. I've been wanting the Barton for over a year, but the cost was always hindering the purchase. After a few failed shifts into 4th at the strip I decided to go for it. 2 weeks to track night, wish me luck.
Work Play Drive best of luck. If you get a chance to review Tuning may I suggest Sean over @ Hemifever. So far one guy is running 11.21 with nothing more than CAI, drags, Throttle body, catless, thermostat. Several into the 11's.
Nice, I'll keep that in mind, no tuning this year. The big ticket items I need to save some cash for and this year I'm redirecting my budget to my wife who wants a new Kitchen. She deserves it, she's been so patient with my "car problem"
Bought my 15 challenger scatpack a few months back and this was installed on it ! haha was surprised to see I didn't have to do this mod! great vid btw!
Thats awesome and Thank you
5 years later this video is still relevant ty
Thank you 😊
Well it took me longer than 45 minutes, try a few hours. Thank you for the video, I wouldn’t have known about the shifter and I doubt I’d be able to do it without the guide. I did this in combination with a clutch delay valve delete. For anyone wondering if it’s worth it, it is. The car is a whole different animal now. I’m honestly worried about getting tickets, it feels like I added 200 horsepower. You don’t realize how bad the stock shifter is until you put this amazing price of engineering in.
It really is a great product, worth the effort of install. :)
Just put mine in a couple months ago. It's awesome. Thank you for the video.
I just finished installing a Barton Short Throw Shifter in my 2019 Challenger 392. Thanks for your video, it was extremely helpful.
Thank you glad to help.
@@WorkPlayDrive seriously can't thank you enough, no other video even came close.
This shifter is a game changer, makes it feel like I've got a whole new transmission, clutch and flywheel.
Totally agree one of my favorite mods.
Thanks for the video instructions mine arrived Monday 23 of March 2020 and put it in that night .There were no instructions of any kind with it . I had however watched this video several weeks ago and watched it again before I installed it . One thing I did different than you was I removed the pin on the drivers side then slide the one on the passenger side back just enough to pull the shifter out with a finger keeping it from comming out and pushed it in to be sure it didn't fall out while I got ready to put the new in as I started to put it in I pushed the pin flush with the surface put the drivers side in first then pressed passenger side in never having to try to start it back in that tiny space . Barton should be giving you a comission . I don't think I would have bought one had I not seen your video. Thanks again Larry
I just completed the install on my 2018 Hellcat following your video. Everything fell into place like clockwork. Test drive, amazing shifter. Runs through the gears much smoother, precise, even reverse is so much easier to find. Great job on video.
Tip; If you place a towel underneath the shifter before removing the pins it can save you if you drop one:)
Glad to helped and awesome tip!!
I dropped those pins about 6 times. I had a long wooden handle that I used to sweep them back to me.
How did you get a Barton setup on a hellcat? The Hellcat only comes in automatic big dog.
The challenger hellcat comes in a manual and auto 🤔.
Your video made it easy to the Barton with confidence. I've watched the video many times and finally made the plunge on a Black Friday special for 15% off, it was a deal I could not pass up. Thanks for sharing this man it is much appreciated. Now on to other mods.
Glad to help in any way I can 💪
Thanks, just got my second Scatpack. This is my first mid. Great video!
Thank you
Great video. Just installed my Barton yesterday and it made a huge difference. getting the pin in on the right side was way easier from underneath my Scat Pack. Thanks again great video.
Thank you ! Absolutely next time I install I’m definitely going underneath.
So, that was quite instructional and thorough. I'm new to the 2019 Dodge Challenger R/T Plus Shaker 6 speed manual and I'm really enjoying it. That Barton shifter looks awesome. I would really like it in orange just like the one you installed.
That is way too much taking apart for me to do. I'm going to hit the like button.
Bro! Just got finished about 10 minutes ago installing my Barton onto my '16 Challenger SRT. I used your vid 100%. Awesome work! You also got me into the SpeedDawg knobs. I got the Rally with Challenger script, GoMango with black racing stripes, black flat stick with GoMango Barton engraving. Came out SWEET! Love your vids man!
Thank you !!!! Glad to hale and you made some awesome choices on the colors.
Does yours have a slight rattle when accelerating?
Absolutely no rattling it was definitely much more stable. You do here a little bit more road noise but nothing annoying.
@@WorkPlayDrive is the road noise coming directly below the shifter? Maybe that’s the rattling I hear but it might just be road noise. It’s annoying because with the original shifter I never heard anything coming from the shifter. And now anytime I accelerating i hear noise. If I put the gear in neutral there’s no noise. The noise is when it’s in gear, or when I’m accelerating (even if it’s in neutral). I’m thinking the guy who put it left a screw loose or put a rubber in backwards or something. It’s driving me crazy lol
Great job on the video...... I would not have attempted taking my interior console on my beloved Challenger Hellcat apart without this video.
I only snapped 1 clip off from the shifter boot. The difference with this shifter is night and day.👍
Glad to hell and I agree, the Barton Shifter made a significant impact on the car, I miss driving a manual quite often.
Awesome video. I got my Barton in yesterday and watched this video last night. Just got done with the install a few hours ago. This shifter is amazing. Made my 15 SRT so much better. Again thanks for the content.
Awesome man, it's one of those mods you get to experience over and over again while driving.
Thank you for making this. Only thing I did different was install those lock pins from underneath the car to save myself the frustration. Much, much easier.
Yep that would have been easier …next time 💪
I watched your video about 10 times😅 while waiting for mine to arrive. I was able to do it almost hassle free beside that passenger side pin🥵. Pretty easy install besides that. I got the OEM version, didn’t really care for the Barton stick or ball. I got this sick screaming skull head from Amazon and bought a Short Stick from EBay, looks way better for me. Thanks for being so thorough and editing the video so it perfectly explained step by step. Appreciate you🫡
Review: If your thinking of getting it…. GET THE BARTON SHIFTER NOW. I put it on my 2016 Manual R/T and OMFG 😲😲😲🤤🤤🤤 the difference is night and day. It makes driving a stick feel like driving what a muscle car of the future would/should feel like. The ability to angle the stick to your custom liking is 🔥🔥🔥 It’s soooo stiff, different from any stick I’ve ever driven and I started driving in a stick. It literally cuts down on the length of the throw shifting from gear to gear. The challenger sticks fu(kin SUCKS… Let’s just be honest. I LOVE THIS THING. IM SOOOO GLAD I BOUGHT IT. DODGE SHOULD HAVE CAME STOCK WITH THIS…. WTF DODGE!!??!?
Thank you. And Hey if Dodge put it in at the factory DIY people wouldn’t get the joy of knowing they installed the best shifter themselves 💪
Put mine on a 16 shaker today…very good directions you gave 👍
Thank you 🙏
I am installing my shifter now and they listened to you! It has a rubber band on the shifter boot! 2021 challenger scat pack
Yes 🙌 🎈
Now that's a REAL MAN S CAR!! AMAZING JOB BRO!!
Thank you 🙏
Excellent video! Just finished installing mine, your video was spot on. Only help I needed was getting the ball off the original shifter, was too tight for me to break free. On the right side pin I put a wire tie thru the clip because I kept dropping it under the car, maybe because my long nails. I'm a short person so I set mine all the way over to the left and the forward most position. What a difference this shifter makes! I also got the skip shift delete pigtail thinking I could reach through and put it on at the same time, no such luck. I'll have to do that another day from underneath. Pair this shifter with the clutch delay valve delete and your shift/response times improve drastically!
Thank You 🙏 the Barton is Definitely one of those modifications that you get to enjoy daily.
Just finished installing this. Barton has released a new version of the flat stick. The detailed instructions for installation are on Barton’s RUclips channel.
Thx for your most comprehensive video. I just got my shifter and Barton’s install instructions are online and for the challenger it is for the 1st generation that is 7yr old. So your video was a godsend
Thank you 😊
Fantastic video! My son mentioned getting a Barton shifter for his 2014 SRT and I was leery about tearing into it. No worries now! I like the little guy helping at the end. Before you know it he'll be wanting to drive it. Brings back memories! Thanks for putting this out there.
Thank you! Glad it helped!
I didn’t even realize this was a 48 min video until you said something 😂 great video with keeping us engaged and showing us a badass shift kit man 👍🏼
Thank you 🙏
I ordered and received a Barton for my 392 T/A. I watched this vid a few weeks ago. I rewatched it tonight before I installed mine. I ran into no problems due to this vid. I knew the tool I needed going into it and all the little tricks for and easy removal / install. Great video!
Awesome, glad to help and congrats on the T/A I'm in love with the T/A 392 and have been drooling over them since they came out.
Awesome video! Watched it before buying my Barton so I'd be confident that I could install it without butchering my car. Taking the console out was a scary thought until I watched you do it. Thanks for making it look as easy as it really was. Watched it while installing mine today and had no problems. Note to all, it's easier to take the knob and boot off before pulling the console! Thanks again!
Thank you 🙏 , taking off the console was my first fears with this car.
Finally got my Barton thanks to you.
Awesome. Hope you enjoy it as much as I did.
THANK YOU!! Your method install worked perfectly! I did flip thr rear rubber "bushing block" on the rear with the bolts forward because that's how Barton showed it. I'm not sure ot matters. A+ job on making something so helpul!
Thank you and thanks for my first ever Super Thanks! 🙏
@@WorkPlayDrive what? No way! Your videos are SUPER HELPFUL! A cup of coffee as a thanks? It's a bargain!
Ha ha !😆 a cup of coffee is my going rate for helping out my local friends too!
Mine is suppose to arrive Friday, so I suppose ill be in my driveway Saturday with my iPad and this video to follow while I install. Thanks dude.
Awesome and good luck. My recommendation is to put a towel or some cardboard under the car so as you drop tools and those annoying clips you can easily slide it out to retrieve them
Used this video to install one on my 2021 challenger 392. Very easy, thanks for the help
Thank you, glad to help
2/19/18 Just installed my Barton shifter and Speed Dawg knob in my 2015 Challenger Scat Pack, thanks to your video gave me the confidence to do it myself, took me longer but that's ok lol thanks again, keep making awesome RUclips videos!
Another great video ! I did not watch all 48 but I did watch the beginning until you started and then fast forwarded to the part where you brought in the helper !
lol the RUclips DVR!
Work Play Drive given I own Camaro I watched the non install
I do the same watch if it doesn't apply to my car, I stop in to see what you guys are up to flop through the install then watch the reveal.
Thanks. I just wanted to say, I was able to put my barton shifter in my 2020 widebody manual with ease due to this video. Thanks. I did not video it but I did take pictures. I will conduct a walk through soon about the mods and updates to the vehicle. Thanks. And I am a subscriber.
Hey glad to help and congrats on that widebody🙌
@@WorkPlayDrive thanks
Lmao at the 1/4in drive comment, "kinda stupid" shits funny. Great video. Saved it. Gunna watch bit again before I do mine. Thank you sir. Cheers
I pulled the trigger! I bought the Barton shifter cause of your video looking forward to installing it using this awesome step by step process. Keep it going love the vids
Thank you, Barton was a great decision, still love mine.
Great videos, came across your channel yesterday and already spent hours watching your videos, iv'e got some cool ideas out of your videos that i wouldn't mind doing to my challenger now. keep up the good work
Thank you!
My Barton just arrived now I just have to wait for the 3 feet of snow outside to melt so I can put this thing on and see if it is as good as they say 😊... It better be. Cost me $700 Canadian to have it shipped here.. LOL Good job on the video you made it look easy.....
Thank you 🙏 you’ll love the Barton it’s an awesome upgrade
Just received my Barton with black & white speed dawg rally ball for my 2015 Challenger Scat. Your install video is incredibly detailed, well done. Thanks a bunch.
Glad to help I've been seeing a lot of Barton + Speed Dawg combos lately, it's like they were made for each other.
Thanks for the great step by step procedure , I just ordered my Barton shifter last night because of your video. A+
Thank you!
Just installed my Barton shifter took 2 hrs I took my time everything went perfect followed your step by step What a huge difference ! Thanks.
Awesome it is a great upgrade 💪
Just wanted to say thank you for doing such a great install video, I used it start to finish to install my own. You should be proud of the job you did on this video. Thank you for your help!
Thank you 🙏
Thanks, Work Play Drive for the video. Just put mine in today and your video walked me right through it. Test drive went awesome. Thanks again.
Anytime man, glad to help!
Amazing video, very explanatory. I love your little helper 👍
Thank You 🙏
After watching this video, I think I’ll give it a go for my Scat. Great job dude 👍
Thank you 🙏
dude.. get a power drill lmao.. its a sharp looking shifter. thanks again for posting for us. i want one and it looks relatively easy to install.
I know right... too busy spending what I can scrounge up on parts to buy faster tools.
Just installed shifter. I didn't even know there was a better shifter until I viewed your video. 2016 r/t scat pack 6.4L. If people purchase after black Friday they are giving a discount, I saved about $60. I'm subscribed, love all of your videos. Now if I can just find a video of a supercharger being installed...
Thank you the supercharger is Next year 😂
I got this same shifter installed on my challenger and boy i love it big difference
Awesome 👏 this was one of my favorite mods.
Used this video yesterday for my install. Still very accurate and relevant. I did spray some silicone on the pins to aid in the install. The Barton bushings are pretty stout and the dry pins might not want to cooperate, especially that blind one.
Helpful tip on passenger side it's easier to go under the car and put the pin in
I just did this today and this freakin thing is brutally tight LOL especially 1 and 2 gear but after first ride I can tell I start to love it !!! . 3 Hours job slowly with this video. Yeah ,this right pin looked like mission impossible due to my large hands and saw this pump jack coming but miracle :) .Thanks a lot for video
Glad to help, enjoy.
Bought a new 2017 392 T/A, Just started also realizing that a upgraded shifter is a must. Found your video, good job you where very thorough and it will come in handy since the last shifter that I re installed was on my 1970 pistol grip 4 speed 440 Six Pack Challenger. Thanks for your time and a well done video! I look forward to my own shifter upgrade this spring! Let us know how it performs at the track!
RGeraciOA5599 she did very well eliminating my issues from 3rd to 4th. Totally happy with my Barton. And 🙏
Your method worked great! Thank you!! 👏👏👏
OMG! NEW SUBSCRIBER! I don't know how I've had my challenger for 2 years and am just now discovering your content. I purchased the Barton shifter recently and upon challengertalk.com recommendation followed your video to do my own install. Thank you so much!
Glad to have helped and welcome to the club 👏
Thanks. I watched the video a few times. I recently ordered my challenger. Just waiting for the car to finish getting built. Thanks for the video
Thank you 🙏
I’m in the same boat. Ordering my Barton this weekend. Ordered my car July 20th, it’s being shipped from the factory on 8/26 - so psyched. Your video was amazing - it’s given me the confidence to tackle this project. 👍🏻😎
Congrats 🍾 🎈 the only thing harder than waiting for the car is waiting for the first 500 miles to unlock the fun stuff.
Very helpful man my Barton came with car but the Allen key was loose good thing u posted video I was stressing like nnooo dnt tell me I gotta take everything off just to get too the that adjusts forward or back noope boots pops right off 👍🏼
Glad to help 🙌
Excellent video, extremely helpful, I installed a Hurst pistol grip shifter
Thank you 🙏
Great install sir I admire your mechanical patience
Thank you 🙏