Hackintosh Ventura - In-Depth Guide (Windows Method)

Поделиться
HTML-код
  • Опубликовано: 21 авг 2024

Комментарии • 222

  • @MTEndia
    @MTEndia 9 месяцев назад +5

    This guide is the most accurate one that i found. Thanks to that and to the dortania guide i hackintoshed a MSI GL75 10th gen I7, 32gb of ram and it worked perfectly almost first time (except for wifi and bluetooth)

  • @Dreamslol
    @Dreamslol 11 месяцев назад +7

    Thank you for this video, i already did a build before with AMD. Switched now too Intel, was quite a hassel with Raptor Lake (13th Gen, there is no official guide). But nice too have a video like this and go trough everything along side too checkup.
    Got everything working, even P-Cores and E-Cores so it has fully support till 5.4 GHz :)
    MacOS: Ventura
    Intel i7 13700k
    AMD 6600

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Nice work!

    • @sumitsamanta7650
      @sumitsamanta7650 10 месяцев назад

      Can you please tell me how you did it? I have intel i7 13700kf and Nvidia 13700kf. Please help

    • @kaludjuti
      @kaludjuti 8 месяцев назад

      Doesn't work on Nvidia @@sumitsamanta7650 . I am also very curious about how he got it to work though

    • @lcoaps258
      @lcoaps258 6 месяцев назад

      ​@@sumitsamanta7650Nvidia... What?

  • @erikcarlin9538
    @erikcarlin9538 9 месяцев назад +1

    🎯 Key Takeaways for quick navigation:
    00:00 🖥️ *The video is about installing macOS Ventura on a Haswell PC using the Windows 10 operating system.*
    01:20 📦 *You'll need specific hardware components like an AMD GPU (Nvidia not supported), SSD storage, an Intel chipset for Ethernet, and a compatible Wi-Fi/Bluetooth card.*
    02:59 💻 *You can choose between Windows 10, Mac OS, or Linux as your primary operating system for the installation process.*
    03:26 ⚙️ *Make sure to update your BIOS to the latest version before proceeding.*
    06:01 📀 *Creating a bootable USB drive using Rufus is recommended for the installation process.*
    13:52 🐧 *If generating ACPI SSDTs, using a Linux installation on a separate USB drive is suggested for efficiency.*
    16:34 📂 *You need to gather various files, including drivers and EFI files, and configure your config.plist file.*
    26:56 🍎 *Selecting the correct SMBIOS (system profile) for your hardware is crucial for a successful installation.*
    30:53 ⚙️ *Configure your computer's BIOS settings as recommended in the Dortania guide for the installation process.*
    31:36 ⚙️ *Configure BIOS settings for Hackintosh by going to the Advanced section and ensuring proper settings, such as SATA configuration (AHCI), disabling VTD, and adjusting Graphics configuration for dedicated graphics cards.*
    36:29 💻 *If you encounter a black screen during installation, consider downloading and installing "WhateverGreen" to address graphics-related issues.*
    37:35 📝 *Disabling Compatibility Support Module (CSM) in the BIOS may be necessary to ensure a successful Hackintosh installation.*
    38:27 🌐 *After installing macOS Ventura, use a tool like "Mount EFI" to access the EFI partition and copy necessary files from your USB drive to your hard disk's EFI partition for proper booting.*
    41:05 📦 *To configure USB ports, use "USBMap" to identify and map the USB ports on your computer. Create a USB map, copy it to the EFI partition, and update your config.plist for USB configuration.*
    44:13 🚀 *Transition from debug mode to release mode by downloading release versions of necessary OpenCore files, drivers, and kexts. Replace debug versions with release versions for improved performance.*
    48:22 🖥️ *Customize the OpenCore graphical user interface (GUI) by configuring options like "picker mode," "picker attributes," and "picker variant" in your config.plist.*
    50:27 🔊 *Optionally, enable the Mac boot chime in OpenCore settings and adjust boot arguments to remove verbose mode for a smoother Hackintosh experience.*
    Made with HARPA AI

  • @lifeasMatthew
    @lifeasMatthew Год назад +1

    The set up progress it is so real like you get to choose your language at the beginning just like a normal MacBooks

  • @p4k8g5i7
    @p4k8g5i7 Год назад +1

    Your guide was truly very useful. I cant thank you enough!!!
    And I managed to setup a Intel B660M and i3 12100 based system with it. But I had to struggle & search around the internet to get the installer run properly, but in the end the it was very well worth it and your guide IMMENSELY helped me out understanding the all the details.
    I have following request for you:
    Please make a video guide on how to maintain and keep the hackintosh stable.
    Please make a video guide on dual-booting with existing windows installation.
    And lastly if possible please make a guide for 12th and 13th Gen Intel platforms opencore and plist setup. The reason I'm requesting is because NONE of the youtube videos goes this deep and comprehensive like your videos. (I watched close to 80-90 videos and almost all of them were based on pre-baked EFIs and installation ISOs ).
    Kind and best Regards!!!

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад +1

      1) keep hackintosh stable - OpenCore is very stable once you configure it right. 2) dual bootong - great idea for a video, 3) - would love to if I had the funds to purchase this equipment... Thanks again

    • @p4k8g5i7
      @p4k8g5i7 10 месяцев назад +1

      @@Studio3BRocks I managed to dual boot with windows 11 and Mac os ventura. opencore is awesome.

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      nice work@@p4k8g5i7

  • @jiggybucksington
    @jiggybucksington Год назад +4

    Gotta tell ya this is by far the most in depth and accurate guide I’ve come across.I have a system similar to yours. I7 4790k but it’s in an hp g1 800 sff paired with an lp rx550 4gb. I patched the Gpu and with the t919 everything works flawlessly. Only issue I’m having is I cant use the hdmi port on the Gpu for dual monitor support. I added framebuffer patches for the connector and went from no signal at to a color flash followed by blank screen to no signal every 10 seconds. I dont quite understand how to patch the busid but I’m guessing that’s what I need to do since I’ve tried everything else. Funny thing is I can use an hdmi cable if I plug it into a dp to hdmi adapter via the dp port. Smbios I use is iMac18,3. Could that be my issue?

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      I can dig into it more . I thought 18,3 is a good smbios. You can try a different smbios. Also is your bios settings correct? Is CSM disabled? I got a black screen with CSM enabled and disabling it seemed to solve it. Other than that it might be other config settings we need to look at.

  • @Starscr34m76
    @Starscr34m76 11 месяцев назад

    Best Guide ever thank u verry much!

  • @DARKscorpions
    @DARKscorpions 11 месяцев назад +1

    Start::512:successfully initialized AHCI controller (frozen in the log m in recovery dmg file)

    • @stuartgreig4833
      @stuartgreig4833 11 месяцев назад

      same here, did you suss out how to fix it?

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      if you need more troubleshooting let me know

  • @jalvillain3669
    @jalvillain3669 Год назад +1

    thank you bro great video

  • @rossgeography
    @rossgeography Год назад +1

    Great video and info - needed a bit of hand holding as my laptop requires a lot of Kexts and arguments in the config.plist and it's a bit overwhelming - great job!

  • @FarebrothaChronicle
    @FarebrothaChronicle 10 дней назад

    The video is entitled "Hackintosh Ventura - In-Depth Guide (Windows Method)" Now out of nowhere we have Ubuntu configuration added to the mix. Time to look for a better Hackintosh video!

    • @Studio3BRocks
      @Studio3BRocks  8 дней назад

      That’s the beauty of the World Wide Web. Do as you see fit!

  • @TechInsomnia
    @TechInsomnia 5 месяцев назад

    You are a true Technologist my brother 💯 Thank you for making this video. 🙏 Watched it fully last night along side your 26 min version and it really helped me to not only finally understand the process but also how to try it now myself without a configurator. 💪 Please keep em coming!! 🔥 LIKED & SUBBED

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      Thanks for the feedback !! Glad to help share the knowledge.

  • @allenevan9287
    @allenevan9287 Год назад +6

    When i go to bootmenu for the first time to install macos. than i click it says ok. and stuck here.. any idea what is wrong... please help me

    • @omarelamri7080
      @omarelamri7080 Год назад

      same for me

    • @gimbleguy
      @gimbleguy 11 месяцев назад

      I get the same thing happening.. I feel like he skipped some steps on this tutorial. He should do it again but properly this time

    • @protos2901
      @protos2901 11 месяцев назад

      Shame Studio 3B made some mistakes, and also didn't do the gpu whatevergreen install. He should redo this video again and be proper this time

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Hi, you can get the opencore-**.txt file from your most recent boot attempt off your EFI partition (assuming you have debug turned on). You can take a look at where it is stalling and go from there. Let me know if I can help more.

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Hi, @protos2901 yes I am using Whatever green, and chose the right DeviceProperties for my AMD RX580 GPU. Also a correct SMBIOS is important too.

  • @xxgg
    @xxgg 10 месяцев назад

    Thank you for going over every? most? steps in building the USB installer.
    One difference I saw with mine is that.. during the first reboot, instead of text based loader screen,,, I had GUI icons? other than that. all worked.
    Also, during the setup screen, I didn't get choose language but straight to country selection. Also, my USB Applekeyboard did not get recognized. odd.

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      You probably configured the gui picker you can turn it off though. Also you can set your language in the config. Also you need to map your usb or use the default kexts

  • @JohnWickBR777
    @JohnWickBR777 11 месяцев назад +1

    big thanks 🥳🙏

  • @devrush3824
    @devrush3824 7 месяцев назад +2

    Any specific reason to use SSDT time on linux while you can run it on Windows it self

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      I don’t recall the reasoning behind it at this time!

  • @aaronlloyd5296
    @aaronlloyd5296 9 месяцев назад +1

    Thank you! Got mine up and running!!

  • @successhycenth
    @successhycenth Год назад

    Amazing tutorial, I was wondering if it works for laptops as well

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      Similar - but different config.plist settings

  • @user-qi5ep7vb2c
    @user-qi5ep7vb2c Месяц назад

    I create the USB Installerr from my PC for my laptop. Does it matter?

  • @JohnSmith-wv8dd
    @JohnSmith-wv8dd Год назад

    I followed your guide, it was very detailed! I'm having an issue where no drives show up on the MacOS install screen. Even when I click show all devices, I only see the installer. I made sure to set my BIOS settings according to the Dortania guide (i.e. AHCI mode, etc.). Do you know why this could be? My machine has a 10700k and my motherboard is an MSI MPG B460i.

  • @user-xq1ym6fo3v
    @user-xq1ym6fo3v 11 дней назад

    I am getting stuck on a grey screen after the first apple logo while first booting … any help ?

  • @afliex
    @afliex 6 месяцев назад

    Great guide! However, I don’t know how to fix my HDMI ports on my laptop not working

  • @jviljaka
    @jviljaka 9 месяцев назад

    I'm running stable Catalina Hackintosh using clover (Morgonaut's old guide), What are the upgrade steps to Ventura? Any tutorials for that?

    • @Studio3BRocks
      @Studio3BRocks  9 месяцев назад +1

      I would follow the same tutorial but instead of formatting your disk just install Ventura which should execute an upgrade

  • @Shinare73
    @Shinare73 8 месяцев назад

    After many tries, I successfully got up to the USB Mapping part (last step before removing verbose and debugging) with my HP ProDesk 600 G4 and after a long reboot I have no keyboard and mouse or any USB ports. Not sure what I did wrong. Looks like I am starting over.... again :(

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      Did you leave other usb kexts in there too to confuse it?

  • @DocVerse678
    @DocVerse678 5 месяцев назад

    i have i7 4th gen with gtx 720m graphic and intel hd4400 will ventura work?

  • @xoxoxxxoxo3614
    @xoxoxxxoxo3614 Год назад

    Hey brother great video, just one question after successfully installing OS can I boot into my windows 10 back, like this process is a dualboot or will it override my windows?

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      You can if you use a separate disk

    • @hsuhfuisah8500
      @hsuhfuisah8500 8 месяцев назад

      @@Studio3BRocks you can separate one drive to 3 partitions of EFI, mac and windows, you can dual boot macos and windows with a single drive like this

  • @jrdulce
    @jrdulce Год назад

    Did the bios settings that enabled and disabled interfere with the performance once you are in windows? Thanks

  • @MsVladmen
    @MsVladmen 11 месяцев назад

    Hello! Thanks a lot for your guide, it was extremely helpful) Did you able to make sleep working? In my case i trying many different methods and it won't work((

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад +1

      no i turned off sleep :/

    • @MsVladmen
      @MsVladmen 10 месяцев назад

      @@Studio3BRocks I tried many different methods in the internet but nothing worked:( I guess we need some DSDT patches to start it work properly, cuz previously in the Mac OS Mojave with clover it worked great

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад +1

      @@MsVladmen yes unfortunate for this older model pc (haswell). If i were to start over I'd go the OpenCore buyers guide and get all compatible components.

  • @TalhaKhalid
    @TalhaKhalid 10 месяцев назад

    Hello help me trackpad not working on disk utility and installer option
    All kext of voodoo are installed
    i5 8th gen
    Intel UHD 620 graphics

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Id have to look at your EFI. Make sure you go through this guide closely dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/coffee-lake.html#acpi

  • @user-dc8dz1oi2v
    @user-dc8dz1oi2v Год назад

    Hope this steps will work on my old laptop intel i3 (Arrandale cpu code name), legacy bios gateway

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      I would start here. dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/arrandale.html

  • @mattwg
    @mattwg Год назад

    Hey I fallowed your tutorial and I keep getting halted on critical error when I go to do first boot any suggestions on how to fix ?

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Hopefully when you go through the steps again you were able to resolve this issue. Any luck?

  • @mcbroon2
    @mcbroon2 11 месяцев назад

    Would be a lot of expense for you but any chance of doing a Ryzentosh in depth guide of the newer way of creating R/Hackintosh I keep getting things wrong and it’s very frustrating 🙏🏻🙏🏻🙏🏻😉😉😉 still got a stable Catalina build from way back when, in the Opencore 0.5.9 Days 🤣🤣🤣

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      I would love to do a Ryzentosh. Please consider donating to the channel or becoming a member.

  • @jekingohel
    @jekingohel Год назад

    I have follow the steps using your video guide. I am using fenvi T919 PCI-E WiFi Adapter. I am having bluetooth issue. It could not on. Can you help me to resolve issue?

  • @highcontroltech
    @highcontroltech 6 месяцев назад

    Hi can you show me where is the part you install vga driver.. because it should be not work automaticly right?

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      macOS either supports the card natively or it doesn’t no vga driver

  • @erikcarlin9538
    @erikcarlin9538 9 месяцев назад

    Got running off the USB. Used mount efi and copied the two folders to the root of the mount but pc won't boot. Thoughts?

    • @Studio3BRocks
      @Studio3BRocks  9 месяцев назад

      It only boots from usb and not from hard disk efi when you remove the usb? Did you properly choose the boot device in the bios?

  • @khalilbarhoumi9153
    @khalilbarhoumi9153 5 месяцев назад

    hello , i have a question , i don't have Ethernet port on my pc can y o u throw it and install ventura OS normally ?

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад +1

      I think you will struggle with Apple ID and things. I haven’t tried it offline in a while.

  • @bv7vd
    @bv7vd 9 месяцев назад

    Why doesn't it work on a laptop with integrated AMD processors?

    • @Studio3BRocks
      @Studio3BRocks  9 месяцев назад

      Either different config settings or unsupported hardware

  • @playfriik
    @playfriik 5 месяцев назад

    24:18 I'm wondering if you even need to define device-id as it seems your CPU has HD 4600 instead of HD 4400 (that latter needs to be faked as HD 4600?)
    Same with PciRoot(0x0)/Pci(0x1b,0x0) section - if you are not going to use it, then I think it is good to remove it.

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      Interesting. Could be worth cleaning up a bit. Thanks for watching.

  • @neo.skai0o0
    @neo.skai0o0 11 месяцев назад

    Just a little bit problem that I have booted into the recovery of the MacOS (Online Installer) and there is no Internet connection in my PC. I tried to throw all off the Ethernet kexts into th Kexts Folder but it still don't have Internet. Does anyone have seen this problem? I use H81 Gigabyte DS2 and i3 4130

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      they were likely conflicting. Try the Realtek driver only github.com/Mieze/RTL8111_driver_for_OS_X/releases

  • @user-ck8ic4by1z
    @user-ck8ic4by1z Месяц назад

    Is it work on hp z-book labtop with core i7 4700h with haswell cpu type ?

  • @TheMadricks
    @TheMadricks 11 месяцев назад

    Hello, have got a question : Does it work with an apu, like the ryzen 7 4800h?

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      I have not tried AMD cpu yet but I’ve heard of others having success.

  • @Jaslolyy
    @Jaslolyy Год назад

    HI followed your guide together with Dortania and managed to get it working now I have Ventura installed but I am having mouse lag issues, my mouse will randomly be laggy but the OS is not lagging. I have mapped my USB using your method already and all my usb ports work.
    Mobo: ASRock B660M Pro RS/ac
    CPU: Intel i3-12100F
    GPU: Gigabyte RX470
    Ram: Lexar Ares 16GB running at 2666Mhz
    Storage: Lexar NV620 256GB
    SMBIOS: MacPro7,1
    Please let me know what I should try to fix this

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      is this a graphics acceleration issue?

  • @pardeepsingh146
    @pardeepsingh146 Год назад

    everything went fine. but my keyboard, trackpad is not working. The internal HDD is not showing up in disk untility of mac. any solutions. pls

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      For the keyboard, trackpad etc, take a look at the Voodoo kexts. As for the hard drives not showing, perhaps you have an incorrect Kext in your EFI

    • @hsuhfuisah8500
      @hsuhfuisah8500 8 месяцев назад +1

      change sata mode to AHCI

  • @TalhaKhalid
    @TalhaKhalid 10 месяцев назад

    OC configuration failed on after booting, how to fix that? All my steps are correct and the config.plist is correct to ,
    what is the mistake I made then? Please help me to fix that

    • @Kinane_ot
      @Kinane_ot 10 месяцев назад

      Cheick if u're efi file matches u're CPU generation (if it's haswell u need a haswell efi file )

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      if you want me to troubleshoot, contact me via apllc.tech

  • @yoFranchis
    @yoFranchis Год назад

    I cant login to the appstore but if can login to applemusic, imassage, facetime and system settings, can you give me a clue what is going on please

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      what error are you receiving? Did you make sure your serial number wasnt already taken?

  • @DanielPostma-xn2yr
    @DanielPostma-xn2yr 7 месяцев назад

    it says that i need an internet connection to install macOS, but i cant get the internet to work

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      Get the right kext for your Ethernet nic

  • @evenaicantfigurethisout
    @evenaicantfigurethisout Год назад

    Will it work pretty much the same way if I'm creating the usb on a current hackintosh? I need to upgrade to ventura from an older version

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      Creating the usb is a bit different. I have a video on my channel that shows how to using from Big Sur to Monterey but the steps are basically the same for Ventura.

    • @evenaicantfigurethisout
      @evenaicantfigurethisout Год назад

      @@Studio3BRocks thanks, i'm on catalina now. as for the usbmap, is it just a simple matter of copying over the usbmap.kext? then i won't have to do the maps again right?

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      @@evenaicantfigurethisout copying it has worked for me in the past .

  • @MsAjieko
    @MsAjieko Месяц назад

    OC : failed to load confiquration, please help

    • @Studio3BRocks
      @Studio3BRocks  Месяц назад

      Do you have config.plist in the right place?

  • @Coolae450
    @Coolae450 6 месяцев назад

    I enabled csm and now I can’t get back into the bios

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      That’s strange. You might need to reset CMOS

    • @Coolae450
      @Coolae450 5 месяцев назад

      @@Studio3BRocks it’s love fixed the problem and have had macOS Ventura on it for about a month now

  • @bijaybasnet2233
    @bijaybasnet2233 7 месяцев назад

    I follow your all guides but I always stuck at " Failed to detect supported SuperIO cheap" can you help me to slove this.
    Love from Nepal❤❤

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      I would contact the wider hackintosh community with searching. Sorry I have not seen this error.

  • @rista4443
    @rista4443 Год назад

    One question if I install mac on my ssd will I be able to use files from my HDD like photos

  • @prakashsinghmeena1022
    @prakashsinghmeena1022 Месяц назад

    can you conform IGPU show in Graphic/display tab or its only show DGPU ?

    • @Studio3BRocks
      @Studio3BRocks  Месяц назад

      I don’t quite understand your question

    • @prakashsinghmeena1022
      @prakashsinghmeena1022 Месяц назад

      ​@@Studio3BRocks sorry for my bad English . I just asking you that You are used your iGPU for headless mode or Computing task only Right. and your AMD RX 580 provide display output. this Two GPU are showing up in your About This Mac & System infomations ?

    • @Studio3BRocks
      @Studio3BRocks  Месяц назад

      @@prakashsinghmeena1022 yes I’m using igpu for computing tasks only. It does not show in about this Mac for me

    • @prakashsinghmeena1022
      @prakashsinghmeena1022 Месяц назад

      @@Studio3BRocks thank you.

  • @imanoj4318
    @imanoj4318 Год назад

    HI My system Configuration will be AMD Ryzen 5 3400G with Radeon Vega Graphics 3.70 Ghz . Can i Install MacOS Ventura with these steps

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      we can certainly try! let me know.

  • @sohanbodhare
    @sohanbodhare 10 месяцев назад

    hey, is there any method to download macos ventura full iso/dmg offline version on windows PC?

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Yes use the dortania guide and go to the windows method

  • @travisroach8847
    @travisroach8847 2 месяца назад

    The Apple folder isn’t appearing within my efi partition what should I do?

    • @Studio3BRocks
      @Studio3BRocks  2 месяца назад +1

      Just need OC and Boot folders at first

    • @travisroach8847
      @travisroach8847 2 месяца назад

      @@Studio3BRocks I appreciate the response I found the issue, it wasn’t the efi folder it was my bios not reading the boot efi

    • @Studio3BRocks
      @Studio3BRocks  2 месяца назад

      @@travisroach8847 are you up and running now?

    • @travisroach8847
      @travisroach8847 2 месяца назад

      @@Studio3BRocks I am I just had to set the path to the opencore.efi

  • @mixingwithssl7870
    @mixingwithssl7870 Год назад

    I want to build for i7 12700k running on gigabyte b760 M, gpu radeon rx 560 please can you help me with this?

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      yes I can attempt to help you please let me know if you are still interested.

  • @DanielPostma-xn2yr
    @DanielPostma-xn2yr 7 месяцев назад

    i get a error that says that python is not installed but it is infact installed

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      You can either use the App Store or download it. There might be two ways

  • @karpoh5595
    @karpoh5595 10 месяцев назад

    Hey, after the first phrase of reboot, it went to the reboot loop, any idea?

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Check your drivers, config, smbios. Could be a ton of things… hard to say

    • @karpoh5595
      @karpoh5595 10 месяцев назад

      any ways to get the log?
      @@Studio3BRocks

  • @galmadon5052
    @galmadon5052 11 месяцев назад

    Can you please redo this tutorial again without skipping steps. I would like to see how to install the RX 580. Thank you

    • @Studio3BRocks
      @Studio3BRocks  11 месяцев назад

      It is recognized by macos. You just need to do the device properties correctly

    • @galmadon5052
      @galmadon5052 11 месяцев назад

      @@Studio3BRocks The device properties is what I want to know. Please redo the tutorial again

    • @Studio3BRocks
      @Studio3BRocks  11 месяцев назад

      @@galmadon5052 I've redone the tutorial about 4 or 5 times. But sure maybe for the next macos

    • @galmadon5052
      @galmadon5052 11 месяцев назад

      @@Studio3BRocks Yes Please. Do it for Sonoma. Thank you

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      AMD RX580 is natively supported for macos. I selected MacPro7,1 SMBIOS and dGPU device properties. It was recognized out of the box. Sonoma has some issues with WiFi support for my PCI card so I will wait to keep it installed however I did post a video about upgrading from the App Store. Enjoy.

  • @irfanvora941
    @irfanvora941 9 месяцев назад

    Can hackintosh be the reason of slowly bricking parts of laptop?

  • @seshadhrimuralidharan6962
    @seshadhrimuralidharan6962 7 месяцев назад

    i cant find anything for alder lake laptops with nvidia gpu...can you help me out

  • @brandonphilander661
    @brandonphilander661 Год назад +4

    Do it on Linux next

    • @Studio3BRocks
      @Studio3BRocks  Год назад +3

      Sure. Which distribution would you like to see? Do you mean make a macos installer from Linux?

    • @brandonphilander661
      @brandonphilander661 Год назад +1

      @@Studio3BRocks I mean following the same process but using Linux instead of Windows. Any distro will do.

    • @Studio3BRocks
      @Studio3BRocks  Год назад +1

      great idea

    • @brandonphilander661
      @brandonphilander661 Год назад +1

      @@Studio3BRocks Thank you.

  • @codetalk0
    @codetalk0 7 месяцев назад

    Is It Work With Ryzen 3400g processor ? and motherboard B450M H?

  • @boowh1
    @boowh1 Год назад

    You can do the ssdt thing in windows also

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      Yes but it needs to be on the machine your installing macos on.

  • @TharakaChamath
    @TharakaChamath Год назад

    Hey is there any method that can make nvidia gpus work on ventura?

    • @isamiihon6005
      @isamiihon6005 Год назад

      Very unlikely for Nvidia GPUs to work

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Look into Open Core Legacy Patcher

  • @srliveevents6213
    @srliveevents6213 Год назад

    plz post the Z790 Ud ax 13 gen i9

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Please consider donating to the channel or becoming a member.

  • @lecongduong6056
    @lecongduong6056 Год назад

    sorry, can my ryzen 5 3550h work with this guide

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Your EFI would be much different

  • @Kinane_ot
    @Kinane_ot 10 месяцев назад

    Plz help idk know why my wifi isn't working when i'm on recovery mac os page

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      I’ll need more information you can contact me at apllc.tech

    • @Kinane_ot
      @Kinane_ot 10 месяцев назад

      Ok thank u 🙏🏻 i’ll contact u over there

    • @Kinane_ot
      @Kinane_ot 10 месяцев назад

      @@Studio3BRocksi’ve send it to u a message. Please answer if u got the time . Thank u and sorry for the embarrassment 🙏🏻🙏🏻

    • @Kinane_ot
      @Kinane_ot 10 месяцев назад

      By the way these are my laptop specs:
      I7 4700mq haswell
      Double graphics:
      Nvidia gt740m(for 3d rendering and games and editing)
      Integreated graphics hd 4600(for changing screen resolution)
      Tactical screen
      Keyboard and trackpad integraded
      Laptop model: hp envy 15 touchsmart

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Hi, I sent you an email@@Kinane_ot

  • @TalhaKhalid
    @TalhaKhalid 10 месяцев назад

    it says cant boot, press f1 to retry please help here too

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      Are your bios settings correct?

    • @TalhaKhalid
      @TalhaKhalid 10 месяцев назад

      @@Studio3BRocks yes my bios setting is correct
      my laptop is dell latitude 5490 i5 8th gen

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад +1

      do you have an OC and a BOOT folder in your EFI folder?@@TalhaKhalid

    • @TalhaKhalid
      @TalhaKhalid 10 месяцев назад

      @@Studio3BRocks yes brother

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      please switch to my discord channel discord.com/channels/1089950438394167326/1089950441053372539

  • @jazzbeats8168
    @jazzbeats8168 9 месяцев назад

    is Whatevergreen ktext required?

    • @Studio3BRocks
      @Studio3BRocks  9 месяцев назад

      Yes

    • @jazzbeats8168
      @jazzbeats8168 9 месяцев назад

      @@Studio3BRocks yes I saw later on in the guide you mentioned it was missing

    • @Studio3BRocks
      @Studio3BRocks  9 месяцев назад

      Im pretty sure its required. I may have missed it in the tutorial. @@jazzbeats8168

    • @jazzbeats8168
      @jazzbeats8168 9 месяцев назад

      @@Studio3BRocks yeh this had been super helpful, i was able to get everything up and running in just 2 days along with some help on various forums . thanks!

  • @jrdulce
    @jrdulce Год назад +1

    Im seeing some tutorials from youtube and that looks so easy. This one is totally different. GIad that I saw your video. Hope this will work on my PC:
    i5 11400
    Asus rog b560i gaming
    Asus rog rx5600xt
    16gb 3200 ram
    Nvme drives

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      At first glance it should. Rocket lake. Use Comet Lake CPUID 0x0A0671

    • @jrdulce
      @jrdulce Год назад

      @@Studio3BRocks thank you for fast reply. Its rocket lake right, any reason why i need to use the comet lake? Thanks

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      @@jrdulce I just got that off the opencore guide

    • @jrdulce
      @jrdulce Год назад

      @@Studio3BRocks sorry for not getting your point. I gonna use rocket or comet? Ty

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      @@jrdulce you’re CPU is a rocket lake, but you need a comet lake CPUID

  • @adamM-183
    @adamM-183 4 месяца назад

    I cant dowlonad MacOS :(

  • @tinwas_taken
    @tinwas_taken 9 месяцев назад

    15:09

  • @boskobuha8523
    @boskobuha8523 Год назад

    Is this dual boot or override windows

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      This is using a separate windows machine from your hackintosh

  • @loengvandara144
    @loengvandara144 Год назад

    How about XHCI-unsupported.kext and USBInjectAll.kext we no need use it?

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      USBInjectAll is an older way. I have no experience with xhci unsupported.

  • @selfxironCodes
    @selfxironCodes 7 месяцев назад

    your discord server link?

    • @Studio3BRocks
      @Studio3BRocks  5 месяцев назад

      At this point try the hackintosh community discord link found on Reddit for better 24/7 support

  • @Nukks
    @Nukks Год назад

    I’m getting a permission denied when I try to run cp -r Results/ /mnt/ what do I do 🥲

    • @Studio3BRocks
      @Studio3BRocks  Год назад

      You need sudo in this case

    • @Nukks
      @Nukks Год назад

      @@Studio3BRocks I managed to figure It out yesterday fortunately but thank you!

  • @TalhaKhalid
    @TalhaKhalid 10 месяцев назад

    On installing macos
    It isn’t installing on APFS instead it say use extended ….. etc I don’t know what to do all of my disk are erased🥲

    • @Studio3BRocks
      @Studio3BRocks  10 месяцев назад

      I can help you if you reach out to me on my contact apllc.tech/contact