Это видео недоступно.
Сожалеем об этом.
ESC brake setting
HTML-код
- Опубликовано: 28 фев 2018
- How to set the ESC brake to stop the prop freewheeling, using a programming card or by throttle stick movement on the RC controller.
Website links
Newton Airlines Uncut - / @newtonairlinesuncut
Newton Airlines blog - newtonairlines....
Andrew Newton RUclips - / @andrewnewton
My portal - anewton.net
More information
iNAV fixed wing tips - newtonairlines....
What HD cameras do I use - newtonairlines....
What FPV cameras do I use - newtonairlines....
What FPV gear do I use - newtonairlines...
Building materials and RC gear - newtonairlines....
Depron Armin Wing build - • Depron wing build
VIDEO PLAYLISTS
Production RC plane reviews - • RC plane build reviews
Scratch builds - • Scratch builds and des...
Maiden flights - • Maiden flights
Action cam reviews - • Action Camera reviews
FPV gear reviews - • FPV gear reviews
OpenTX and Taranis - • Playlist
FlySky Turnigy i6 and i6s - • Playlist
Past Planes long term reviews - • Past Planes series
Underwater - • Underwater, Marine Life
Timelapse - • Timelapse, stop motion...
Plane mashups - • RC plane mashups
Hotwire airfoil cutting - • Hotwire airfoil cutting
RC cars, boats and land yachts - • RC cars, boats and lan...
Kites and KAP - • Kite Aerial Photograph...
AZOR Dutch bikes - • Azor Dutch bikes
MATERIAL Links
Knauf XPS insulation foam - www.bunnings.co...
Hotwire template material - www.bunnings.co...
Bulk Depron - www.tradewareho...
Skyshark P4X spars - www.kitesandfun...
New Stuff iron-on film - EZload laminate - www.neopostonli...
Blank ID cards - Ebay - Search for CR80 Blank ID cards
Close-up glasses - goo.gl/fyOGnG
Thank you for taking the time to post. HUGE help!
Thanks for the explanation. The youtubers nowadays are concentrated in other developments and these videos will always be needed for those new to the hobby.
you are a life saver. i was looking for a way to stop my motors from spinning, everyone was saying that its only possible with a special esc. mine work perfectly
Thanks ESC programming has been a challenge for me, especially with the radio. Finally purchased the card which is great. I have several that do not work with my card ,so next step for me is to standardize to one manufacturer. Thanks again for the informative video.
Extremely good video! Thanks a lot, saved me waiting for days for shipping an esc card just to get my folding prop to work.
Brilliant tutorial/review! Clarified more than a couple details I had questions about since starting this hobby last year.
More ESC programming options ... , brilliant ! Man this hobby has changed since I last flew my glider as a teen 😉 Thanks for another 'ESC-manual' Andrew 👍
Glad to help
Thank you. Your information has helped me more than once and you always provide clear and detailed instructions.
Merci Andrew grâce a vous je me suis remis a l'aéromodélisme.
Thank you Andrew thanks to you I went back to model aircraft.
Brilliant ! That was super clear for me and helped me a lot with my dualsky 10 A ESC . My folding prop kept spinning , I had no idea why. Now I know. Its the BRAKE switched off !
Nice work!
Wonderful tutorial, especially the part where we learn how to program an ESC without a card. Makes you wonder what planet the designers are from, though. Thanks so much Andrew !
My pleasure, glad it helped
Thanks Andrew, you just saved me a lot of time and money. Your videos are the interesting and easy to follow. Thanks again
Glad to help
Hi Andrew,
Great video. Visual demonstrations are the best.
Thanks Sir Andrew
thanks for this good film. ❤❤
this is well working in my 2 ESCs~!
one is 20A ESC same as yours in this film,
another is 12A noname stock ESC in the U-glider PNP version.
I could setup all my ESC motor break.
Nice work!
Thanks Andrew, always find your explanations clear any helpful. Paul
Thanks Paul
This video is only 2 years old, still useful!
Thanks, standard ESCs haven't changed
Amazing advice delivered in a simple understandable way. Thanks again.
Thanks Allan, I like simple
Value in EVERY video!
Your videos are great, so much useful information with excellent demonstration.
Cheers!
Very nice , this is going to be extremely helpful for beginners!
Just what I need. Great informational video.
Very nice information about break
Excellent demo. Thx
Thanks for that video Andrew, extremely helpful, I’ve successfully programmed the esc on my Hobbyking Walrus glider to now have the brake on. I was wondering why the prop was still spinning when I came to land although I had zero throttle 👍🏻
Great to hear!
Thanks Andrew another great instructional Video. Keep them coming.
Thanks Garry
That is so helpful sir 😄
Love from India♥️
Thanks Priten, hugs back to you
I bet you have memorised that little procedure for time ever more, Mr Newton. I haven't quite done enough brake settings to get it memorised yet, I am still fumbling around trying to remember "was that the 2nd or 3rd beep? Bah pfft!".😀
I have now.
Just what I needed to know. Thanks.
Cheers dude really helped me
No problem 👍
Bardzo dobry film instruktażowy, dziękuję i pozdrawiam
ESC's can be tricky, glad it helped.
Thanks, worked for emax and turngy for me. Cheers
Good to know, thanks
Andrew can you please show how to calibrate the strix goblin ESC
I don't know which ESC that is
Hi Andrew. I am putting together the AR Pro PNP and want to program their stock ESC to use a li-ion 4s2p pack. The kit came with no ESC instructions and I can't find anything to help this. Could you do a video please?
ESC manual is on the ZOHD website
@@AndrewNewton Thanks Andrew - you always help!
this helps very bit for me today thanks
Glad it helped
Thanks for sharing 👍
Thanks for watching
Hi Andrew can you please set the brake on your Orbit neon and if successful let me know how to do it. I’ve set many escs but can’t get the neon brake set thanks 😊
Sold the Orbit sorry, but at a guess it's one beep for brake setting, then throttle up to select soft to hard, 1 2 3 4 beeps and throttle down
@@AndrewNewton thanks for the reply, I’ve tried as you mentioned but can’t get it set 😢thanks
I have a brandless 40A ESC. I connected my motor and ESC to a Speedybee F405 Wing flight controller. At first everything seemed fine but somehow I seemed to have messed up the ESC programming(?) When I arm the model and turn throttle on, it turns on. But even for a very low throttle, the moment I input a left aileron stick command, the motor stops spinning. I have triple checked all connections. It isn't an overcurrent issue either since I connected a Wattmeter and verified that the current draw is within ESC range (max current is 13 Amps). I can't think of anything else other than the ESC accidentally being wrongly programmed. I am running INAV 7.0 in my FC. Please do let me know if you have any idea why this might be happening. Thanks in advance.
Did you have differential thrust in the mixer? Unlikely to be the ESC, more likely the INAV setup or radio mixing
@@AndrewNewton SOLVED! It was INAV setup indeed. Apparently, I had set up channel 5 as channel 1's slave in my FlySky FS-i6X transmitter during direct manual flight using ESC directly connected to the battery. When I later connected the FC, I had assigned channel 5 in INAV to arm the model as well. That caused the FC to think that I was trying to disarm every time I gave a left aileron stick command because the bracket in the Arm channel in INAV mode for arming interfered with the aileron stick command. I simply had to assign arming to a different channel (I now have channel 6 for arming), and this mysterious throttle cut is now gone. But anyway, thanks for your reply. I enjoy watching your videos and learning from your experiences! :)
@@prateekshrestha9824 Aha, well done. Should almost be a Gold Rule of INAV - Start with a fresh new model setup
Hello can you help me one of my escs are making the motor twitching like spinning so rough? and not beeping when connected to the battery?
Most likely one of the three wires to the motor is broken
@@AndrewNewton is there any way to fix it?
Great Info! Thanks... 😀
How long will it take to get it “to make a musical sound”
Around 10 sec
Great info thanks
Well done Spanners old boy! My DW Eagle says thanks and smoke me a kipper ;)
Good one!
Thks dear Andrew. I learn some new... regards!
No problem. It helps me to remember too
Hey i know this has nothing to do with Video, but i just brought a Phoenix 2000 and have noticed that the rudder is on 9gram servo and elovater is on 17gram servo is this correct or should it be the other way around? thanks for your time
Hi Keil. 9g on the rudder is OK but I have 13g metal gear on the elevator and ailerons (TGY 9018). 17g is OK on the elevator.
when programming by tx i have signal and ground wires from esc to fc conneted is it why my esc wont go to program mode?
Yes it could be. May need to program the ESC when disconnected from the FC, or use the Outputs window in the configurator to manually operate the throttle.
@@AndrewNewton i did as you said from inav and all good now, thank you my friend
Thank YOU for the tone explanation..helped me a lot.. Can you please upload the tonal code pdf?
hobbyking.com/media/file/407056493X1759697X24.pdf
Great Tutorial Andrew...Liked that Prog card, makes life easy. I wonder how many non Turnigy ESCs it will work with?
I had never thought to try other ESC, but Hobbywing works!
Could u pls guide how to restore factory settings of volantex esc , with thanks
Need to locate the manual and find which beeps are for Factory reset.
@@AndrewNewton thanks for your kind reply.
Could not found on net , if u know any link pls share ,with thanks
Does every ESC with simonk name on it are programmable using turningy programmable card
Only some Turnigy ESCs
How to know which option is now selected?
No way to know unless you reset to default
Hey Andrew! I have a question for you.... Do you still build planes from scratch? I am just about to try to build a proper wire cutter as I think depron wings are a bit limiting. But I've noticed that you don't seem to be building anymore. Is it that you just can't make the perfect plane and the manufactured ones do it better? Thanks for all your amazing content, I can't tell you how many videos of yours I've watched and how many are part of my essential watch lists. All the best.
Many thanks Tim. Definitely still building, 3 so far this year, the Boxler wing, Bleriot XI and the Toro slow flying wing. Scratch builds are the best, although I haven't been able to make a good big thermal glider
If you are running inav, I assume setting the throttle from between 1000 and 2000 and setting motor stop does the same and you don't need to calibrate the ESC?
Still need to calibrate I think
Thanks Andrew, come to think of it, I believe you can do it from the motors tab in inav by connecting via usb then turning master motor control to 100% and then powering the ESC and reducing power to 0. So same as with the transmitter I guess but that calibrates it to the inav top and bottom settings.
Maidening the fx-61 tomorrow so I want it right.
Depends on the ESC protocol you're running. If it is digital, (DShot), then you don't need to calibrate it.
Aha, I didn't know that, thanks
Thanks for the knowledge sir
My pleasure
Following your example, I bought a programming card and now only buy Turnigy Plush.
However, having just installed a 30amp one in a new glider, the prop absolutely refuses to stop spinning. I’ve programmed it twice, to 100%, I’ve even tried an increasing number of rubber bands. All to no avail. 🤬
Clearly, the esc is not braking the prop. Just a’wundrin’ if you have any suggestions. Until I fix this issue the glider is a duckling, as the torque from the feathering prop spin is tipping the model hard right!
Have you tried using the radio to set the brake? hbfpnl.files.wordpress.com/2009/11/turnigy-plush-esc-user-manual.pdf
ESC SkyWalker 20A does not work with Zohd Kopilot, which is the reason. Andrzej -PL
Yes it works
Merci vidéo très bien faite
Bonjour de France
Greetings from Geelong
You sorted that one out for me thanks
Was it you that asked?
No I did not but I just got a 30amp ESC, the same make as the one you did the demo with
Sweet
👌🏻✌🏼
Is the brake setting ESC more useful than default.. bro?
For gliders and belly landers it's essential. Folding props need to stop spinning to fold back, and a spinning prop creates more drag. Also for belly landers, a spinning prop has much greater change of breaking when it touches the ground.
++ndrew Newton -
did this aircraft have the heavy loads by using the nanotceh battery, bro..?
It worked OK with 1300 3S and 950 2S
++Andrew Newton -
wht about using 2000mah 3S on this aircraft, bro.. ?
I am hoping you would do a video on select correct motor for twin motor and wiring 😀
Interesting project, I'll add it to the list
Andrew Newton , thanks I can not find a good source, I have tried doing single motor and splitting the requirements into 2 equal.parts, it works, but not very well
thanks,,,for that
How to set up an arming switch in the radio for rc plane?? Please help🤔🤔
Already done for Taranis and FS-i6. Look at the programming videos
@@AndrewNewton can you send a link of the video??
@@AndrewNewton THANK YOU SO MUCH
I don't know for sure but I think it's not good for the esc to not be plugged in to any motor
First time I have heard that.
how about setting it on esc 4in1?
Use BLHeli Suite at a guess. I dont fly quads
@@AndrewNewton I have problem to set my BLHeli, did you have that video to set BLHeli?
How to set passthough Flight control?
Which FC?
@@AndrewNewton speedy bee f405
If it's BetaFlight I have no idea
Hobbywing ESCs work with Turnigy white programming card (maybe due to the same silabs uP and also same FW?)
photos.app.goo.gl/euoCWE5ttKYY3Zl13
Excellent, thanks for that
what your prop will do when brake set on?
ruclips.net/video/mtMLgHPfXfc/видео.html
on a flying wing and motor in line with a wing it will hide completely into the wing.