Hi , device depends if it s repairable or not , the device software will show if it s repairable or not , if it s repairable it will fix for u the nec mcu position the you need then to change the motor , if it s not repairable , device software will renew the ESL then you need MB device to program it . for more technical questions you can write to our technical support on their skype or email .
Hi, my ESL is in lock position. Do I need to have the software to reset it to unlock position. In your video you just pressed the two switches to reset it and then you only read out something with the software but dont write anything to the hardware? So is the software neccessary?
Thanks for the video, I am about to repair my esl currently the steering is in unlocked position, can I just remove the part and replace the motor without hocking it up to the laptop? Cuz I dont have the adapter nor the software. Thanks
Ashesh Patel I swapped the motors but unfortunately didnt worked, I guess It went into locked position, so now I will have to send it to be programed. Not sure why but I guess its because I installed the ESL while its in unlocked position, however, I removed the Car battery and reconnected it so when I put the Key it tried to unlock the steering ( I heard the ESL sound) then nothing happened.
friend excuse me I'm the same and I need to get the engine of the module but I do not know what voltage works and I do not know where to get it or how to request it I am in Mexico for your help a thousand thanks
Sr. How are you .. I have that problem with my c300 now my question is can I send you my so you can fix it or you xan sell me one already rebuild...abd how much will cost me cuz the mercedes dealer is gonna make wait 3 months and I can't wait that long ...so please reply me ...
Willi…seriously..I am a very basic guy when it comes to fixing cars…almost no skill at all. I have a 2013 Mercedes 350 GLK…and the ESL died. My Mercedes Dealer said it would be around $2000…and be prepared for it to fail again in another 3-4 years…because it is made in China to poor reliability parameters. I tried to get secondary Mercedes mechanics on Craigslist…nobody would touch it. I then said what the hell…I went right here on RUclips…and went in after the damn thing. Everything went off easier than I thought..including the instrument cluster and steering wheel…even loosening the steering column was easy…let’s say the whole thing took 1.5 hours.. I then went on eBay and asked to have an “ESL emulator” made…which costs about $300…and can be made just by sending them your spare key….they get it back in your hand in about 3-4 days…you then plug it in where the Old ESL clipped in….and start her up…and never worry about this thing again…(do not leave the old ESL in there un-engaged…as it could theoretically lock your steering wheel if you hit some bumpy roads…take the damn thing out and throw it in a lake. I have had mine in for about 3 years…and it starts like a champ…every time.. because there are no moving parts just circuit boards. Velcro the little unit jus under the dash..if you ever need to replace it…seriously..it’s the only way to go!
Dear kindly contact our sales team at Simon Touch they will be happy to assist you ! Skype Sales: SalesatKeyProgTools Sales Email: info@keyprogtools.com & simon.touch@hotmail.com
hi dear you contact our tech team on email or on teir skype : email: support@keyprogtools.com / skype link : join.skype.com/invite/krhcOpJ0oLyJ they can assist you from Monday to Friday from 9 am to 5.30pm ( local time lebanon)
Good morning, friend, thank you for the video,
but how can I buy this motor, I'm in Brazil?
Very nice explanation and information, blessings
What if it already is in the unlocked position when you take it out would i still need to program it
Hi , device depends if it s repairable or not , the device software will show if it s repairable or not , if it s repairable it will fix for u the nec mcu position the you need then to change the motor , if it s not repairable , device software will renew the ESL then you need MB device to program it . for more technical questions you can write to our technical support on their skype or email .
Hello my steering is in lock position do I need that software to reset in unlock position or is just about power so I can connect it back on a car?
is it in facelift problem resolved (2013)? or all models have problem with esl?
Very nicely explained
"Remember to keep one centimeter ..... " From where to where? thx
From the guide to the plastic cog observation is the primary skill of mechanic, technician ,surgeon,pilot remember that
Hi, my ESL is in lock position. Do I need to have the software to reset it to unlock position. In your video you just pressed the two switches to reset it and then you only read out something with the software but dont write anything to the hardware? So is the software neccessary?
Hello Kindly contact our sales department
Skype Support: simontouch(lebanon)
Support Email: support@keyprogtools.com
Thanks for the video, I am about to repair my esl currently the steering is in unlocked position, can I just remove the part and replace the motor without hocking it up to the laptop? Cuz I dont have the adapter nor the software. Thanks
Hello Dear,
kindly contact our support team they will be happy to support you
Skype ID: simontouch(lebanon)
Did you have to reprogram? or were you able to just swap out?
Ashesh Patel I swapped the motors but unfortunately didnt worked, I guess It went into locked position, so now I will have to send it to be programed. Not sure why but I guess its because I installed the ESL while its in unlocked position, however, I removed the Car battery and reconnected it so when I put the Key it tried to unlock the steering ( I heard the ESL sound) then nothing happened.
Dear
as i said before, kindly contact our support team they will be happy to support you
Skype ID: simontouch(lebanon)
By
Grate Video, Can you send me a link on were to purchase this motos? were can I get Them?
EBay
Dear Sir
I would like to buy these equipments , plz advice. We are in need of this service , we are in central Asia. Please advice . Thank you
Best tool ever
Great video instructions.
Best tool i ever use
Hello Where do you find this motor please ?
Thanks for posting
How much cost this tool ?
Hey buddy, is it possible to buy this rebuild unit from you? Also, is this the same unit used in W204 2009 C180 model? Please reply!!
What’s the name of the grease that you used?
I can't get the screws/pins out of the case. What would happen if I drill them out? Can I put screws in afterward? Awesome info., thanks!
You can use star screwdriver
First try with number 5 then 6 and open the ESL.
Thank you, I got it.
KING!
I am getting you my car tomorrow!
2008 204
friend excuse me I'm the same and I need to get the engine of the module but I do not know what voltage works and I do not know where to get it or how to request it I am in Mexico for your help a thousand thanks
Kindly contact our sales department
Skype Sales: Sales@KeyProgTools
Sales Email: info@keyprogtools.com & simon.touch@hotmail.com
@@thesimontouch are you in UK ? PLS REPLY TONT
Great vid, thanks
Sr. How are you .. I have that problem with my c300 now my question is can I send you my so you can fix it or you xan sell me one already rebuild...abd how much will cost me cuz the mercedes dealer is gonna make wait 3 months and I can't wait that long ...so please reply me ...
Willi…seriously..I am a very basic guy when it comes to fixing cars…almost no skill at all. I have a 2013 Mercedes 350 GLK…and the ESL died. My Mercedes Dealer said it would be around $2000…and be prepared for it to fail again in another 3-4 years…because it is made in China to poor reliability parameters.
I tried to get secondary Mercedes mechanics on Craigslist…nobody would touch it. I then said what the hell…I went right here on RUclips…and went in after the damn thing. Everything went off easier than I thought..including the instrument cluster and steering wheel…even loosening the steering column was easy…let’s say the whole thing took 1.5 hours..
I then went on eBay and asked to have an “ESL emulator” made…which costs about $300…and can be made just by sending them your spare key….they get it back in your hand in about 3-4 days…you then plug it in where the Old ESL clipped in….and start her up…and never worry about this thing again…(do not leave the old ESL in there un-engaged…as it could theoretically lock your steering wheel if you hit some bumpy roads…take the damn thing out and throw it in a lake. I have had mine in for about 3 years…and it starts like a champ…every time.. because there are no moving parts just circuit boards. Velcro the little unit jus under the dash..if you ever need to replace it…seriously..it’s the only way to go!
Where i can buy the soft and Hardware ? How much?
Dear
kindly contact our sales team at Simon Touch
they will be happy to assist you !
Skype Sales: SalesatKeyProgTools
Sales Email: info@keyprogtools.com & simon.touch@hotmail.com
where do you get the motor from
Hello dear you can order by email at :simon.touch@hotmail.com or info@keyprogtools.com or skype for sales link : join.skype.com/invite/j5J8mlha56NB
Здравствуйте как называние вашего программатора ?
What tools/hardware I should buy to do this? Where can we get your software in your computer?
Ivan Matala
I have sent two emails and still haven't heard back. How do I buy these tools?
hi sir how much ESL program.
I have sent two emails about buying and still haven't heard back. How do I buy these tools?
Awesome and thanks
given both improves with mercedes w211
I replaced my motor in my esl w204 do I have to reprogram it its still not working
Hii! How did you solve it?
i change motor and stop working esl what wrong with esl
Kindly for a better support do contact our support department
Skype Support: simontouch(lebanon)
Support Email: support@keyprogtools.com
Wow good gob
Good
how do i know it is unlocked or locked position ???
hi dear you contact our tech team on email or on teir skype : email: support@keyprogtools.com / skype link : join.skype.com/invite/krhcOpJ0oLyJ
they can assist you from Monday to Friday from 9 am to 5.30pm ( local time lebanon)