Good morning, Little tip, after your work, you should have left the box in the unlocked position. Then after having put it back on the steering column at this time you use the small holes made before to turn in and put the box back in position to lock on the steering column directly.
The motor can only be replaced if the old one still worked. Once the old motor seizes you cannot simply replace the motor. There is a component on the board that also goes when the motor seizes up. Beat option is an emulator
have Mercedes E220D, 2017 W213, I have a problem that the fan would still be running on max. speed for a 1.5 minutes after killing the engine. Knowing that the engine is Model 654. I have relaced the following parts: Fan, Turmos, Water pump, water back feed line. All original parts but the problem is still on. Also no fault found, could you please help me troubleshooting the problem? THANKS ALOT.
If I had known these go bad, I would have removed it from the steering column before it failed. Once it fails you have to remove the whole steering column and it is not a fun job.
On a friends car that was intermittently working the cheap motor from amazon worked. But on my car it didn't, but mine totally quit working. It was worth a shot though for $10 before spending a lot to get an emulator.
Good morning,
Little tip, after your work, you should have left the box in the unlocked position. Then after having put it back on the steering column at this time you use the small holes made before to turn in and put the box back in position to lock on the steering column directly.
The motor can only be replaced if the old one still worked. Once the old motor seizes you cannot simply replace the motor. There is a component on the board that also goes when the motor seizes up. Beat option is an emulator
Thank you
I want know the correto posicion the gear please
have Mercedes E220D, 2017 W213, I have a problem that the fan would still be running on max. speed for a 1.5 minutes after killing the engine. Knowing that the engine is Model 654. I have relaced the following parts: Fan, Turmos, Water pump, water back feed line. All original parts but the problem is still on. Also no fault found, could you please help me troubleshooting the problem?
THANKS ALOT.
sorry I have no idea how to fix that. I barely fixed my car.
Please any can answer if we need to replace the plastic dial BEFORE it goes bad?
If I had known these go bad, I would have removed it from the steering column before it failed. Once it fails you have to remove the whole steering column and it is not a fun job.
You did not explain how you reset the gear mechanism back to the correct lock position in the esl.
Can this be done without removing the coloumn???
only if the ESL get stuck in the unlocked position or you can get it to unlock one last time.
Did it work ?
On a friends car that was intermittently working the cheap motor from amazon worked. But on my car it didn't, but mine totally quit working. It was worth a shot though for $10 before spending a lot to get an emulator.
Well, I believe yours would’ve worked if it wouldn’t have be burnt crispy.
@@reubenrice9458 yes, my pc board was burned.
Word of advice. Way way less talking and more doing.
I want know the correto posicion the gear please