53.Chinese diesel heater Motherboard replacement.

Поделиться
HTML-код
  • Опубликовано: 11 окт 2024

Комментарии • 17

  • @DEVONLAD11
    @DEVONLAD11 8 месяцев назад +2

    I have the black board on my 2019 diesel heater. The newer blue boards work completely different to the older boards. There's no altitude adjustment plus you cant disable the pass code also the startup fan and pump control runs different and there's no startup retry ect. The blue board is a cheaper version of the old black one plus you cant use veg oil or waste motor oil with the blue board.

    • @simplyboating4609
      @simplyboating4609  8 месяцев назад

      Hi,
      I didn't know about the blue board. I know that black ones are sometimes different and are not compatible with the controller that's why its better to replace them both at the same time and try to get a generic one. .

  • @thebaldyhippy
    @thebaldyhippy Год назад +5

    Great video

  • @Louis-wr9ft
    @Louis-wr9ft 10 месяцев назад +1

    thank you

  • @jaimoallen8441
    @jaimoallen8441 9 месяцев назад +1

    Hi have you got a link for the motherboard and controller please

    • @simplyboating4609
      @simplyboating4609  8 месяцев назад

      Oniissy Car Heating Control Board, Car Air Diesel Heater 3KW 5KW 12-24V Motherboard W/LCD Switch Remote Controller amzn.eu/d/f9zDvCu
      amzn.eu/d/f9zDvCu
      Hope this helps if not just ask.

  • @GD90341
    @GD90341 9 месяцев назад +1

    On the pcb there is an hall sensor, on the new there is no one to see, how does it regulate?

    • @simplyboating4609
      @simplyboating4609  9 месяцев назад +1

      I not that technical sorry, all i can say is it works fine.

  • @Den-ml7zg
    @Den-ml7zg Год назад +1

    Thanks for the vid, i tried it but get error 06, fan Just takes off

    • @simplyboating4609
      @simplyboating4609  Год назад +2

      It sounds like the fan is not spinning freely. Have a look at my vlog 55 at 4.35mins in and I explain about E006 If you still can't fix it let me know.

    • @simplyboating4609
      @simplyboating4609  Год назад +2

      ruclips.net/video/GbFpD1IOE3o/видео.html

    • @Den-ml7zg
      @Den-ml7zg Год назад +2

      Thanks for the reply, I could not get it to work. When I hit the power button the fan spins up fine it just keeps increasing rpm until the unit shuts itself off giving code 06. After further research it appears I need the black board with the controller I have. Anyway I found the black board and controller combo on Amazon. Hopefully this will fix my problem.

    • @simplyboating4609
      @simplyboating4609  Год назад +5

      @@Den-ml7zg It is best to just buy the set so you know its compatible. You will get controller, remote and board for about £35

  • @Jen-fy3pj
    @Jen-fy3pj 11 месяцев назад +1

    Simple if you no how.