This engine assembly isn'y done correctly and people must not follow this as guideline else the engine will be ruined. Firstly, as some has already commented there isn't any lube applied during assembly. Is a big no no as the initial start would cause great damages. Second, you shouldn't crank the camshaft without installing the timing belt with proper timed engine. It will create valves and pistons interference that causes huge damage. Not trying to be rude, just highlight the importance of proper engine assembly. Thanks for your video anyway!
@@mudderscotch4017 Since it is a Nitro engine, can applied a coat of nitro fuel or after run lubrication oil to it pistons, cylinders, rods and bearings. While coat model grade grease on the camshaft and rockers since it does not meet with the nitro fuel while running.
Nitro fuel has heaps of oil in it so he did fine i mean just look at new engines made by O.S they run forever and they have a drop of machine oil so his building is just fine you try grease or huge amounts of oil and watch how many glow plugs burn out.
you need to make sure that your belt is timed correctly and you should add some lube when assembling the engine head should be screwed corner to corner for even pressure
I must ask you as a mechanic and I am not a engine builder but obviously the engineering is done but would you assemble a normally aspirated engine in this way and I don't need to know about the lubricant.
Definitely don’t begin by using a drill to put the screws In like did, or the lack of oil, or turning the crank before installing the timing belt (The belt he put around the three pulleys right before the fan). This little engine is certain to have an early death and overhaul.
Holy shit dude i can't believe you didn't snap the heads off those bolts using that impact but driver dam! Or pull the threads out of the block thats way too tight you're going
Boa noite como compro esse motor para chegar aqui no Brasil, Deve ser difícil com frete e imposto fiquei interessado nesse motor 2 tempo para esta no off-road nitro. Kkk
¡Gracias!
itu mesinnya apakah ada pakai pelumas (Oli)?
Enggak kayaknya
This engine assembly isn'y done correctly and people must not follow this as guideline else the engine will be ruined. Firstly, as some has already commented there isn't any lube applied during assembly. Is a big no no as the initial start would cause great damages. Second, you shouldn't crank the camshaft without installing the timing belt with proper timed engine. It will create valves and pistons interference that causes huge damage. Not trying to be rude, just highlight the importance of proper engine assembly. Thanks for your video anyway!
The way he screwed in the cylinder head 💀
Quick question ik in a big actual gas car motor you can lube the parts with oil but what do you use for these little things
@@mudderscotch4017 Since it is a Nitro engine, can applied a coat of nitro fuel or after run lubrication oil to it pistons, cylinders, rods and bearings. While coat model grade grease on the camshaft and rockers since it does not meet with the nitro fuel while running.
Nitro fuel has heaps of oil in it so he did fine i mean just look at new engines made by O.S they run forever and they have a drop of machine oil so his building is just fine you try grease or huge amounts of oil and watch how many glow plugs burn out.
Stick to funny animals kid
Cikal bakal pembuatan mobil. Entah jenis apa. Saya yakin episode berikutnya akan merancang sasis dan body mobil. Ditunggu episode selanjutnya
10:01 Adhan sound 😍
MashaAllah love from Pakistan 🇵🇰❤️
Salam dari Indonesia@@its_steward
Смотрел с таким интересом как будто разбираюсь в этом 😂крутые видео создаёшь,продолжай в том же духе🔥
The goat is screaming in the back
Great video mate!
Thanks for your time 👍
A perfect example of "using the right tools for the right job".
#RiniAnita om mau tanya. Dulu sekolah teknik apa..ko apik apik semua karya nya😮
Great video. I will be building my L200 soon.
Chanel indo yg komen org luar semua
Mantappp haha
Học ngành gì để chế tạo ra những thứ này vậy ad?
Excellent Rini Anita 💚👍
WAIT MY MOM'S NAME IS ANITA
I heard cartons kids laughter chickens goats I heard it all lol I’d sure love to see a chicken in a nitro car please 🙏🏽
you need to make sure that your belt is timed correctly and you should add some lube when assembling the engine head should be screwed corner to corner for even pressure
Psicólogo veja algo que lhe acalme:
Eu vendo vídeo de um mini motor cortando giro kkk
I know just a quick vid but dont you have to time those cams when you put that belt on lol!!
I must ask you as a mechanic and I am not a engine builder but obviously the engineering is done but would you assemble a normally aspirated engine in this way and I don't need to know about the lubricant.
nice bringrish, and you didnt ask anything haha
Super cool, I wouldn't even know where to begin.
Definitely don’t begin by using a drill to put the screws In like did, or the lack of oil, or turning the crank before installing the timing belt (The belt he put around the three pulleys right before the fan). This little engine is certain to have an early death and overhaul.
6:52 🐑= embeee...🤣🤣
Denger aja lu ngab 🤣🤣
sem lubrificação nas pecas antes a montagens, apertando os parafusos com parafusadeira em fila e não em X
What is it used for? Fun?
Sounds like the cylinders are opposing each other. Nice though!
I have one too, and I only had gas and it worked.
No it can’t. It’s nitro fuel - the type typically used for RC cars.
nice video but no oil , no grease for assembled your motor ???
Nice engine but u did not lubricate the cylinder to reduce the friction when the pistons is moving, is it possible to do that?.👍👍
i think that the cylinders came pre lubed because when he was fidiling with them his fingers were greasy
Any engine needs assembly lube. Never put parts together dry like that.
Sure running it with no lube or oil and revving it to the moon on cold starts is a great idea
Can you tell me what lubricant or oil you use for the engine?
Snail slime
It's a 2-cyle motor it gets its lube from the NITRO fuel Not real motor oil.
Halo wong blora 😁
How much did it cost you for the whole entire kit?
Baru taubada chanel sebagus ini duhh..
How much does it cost?
Crankshaft goes into the block first, then the piston and rod assemblies.
It's just a toy guys! He bought it, therefore he can do whatever he wants to it! Deezam!😂
Nice video bro ❤❤👍👍
Can you tell me where do I get those tools pls.
Por que este homem está montando motores sem experiência nenhuma?
Where Can a person buy this at. How much does it cost.
Around 600 for everything you see
@@gunnerolsen6734 how much hp and Torque does it have.
Order dimana boss
where did you buy it from
Coba Pasang ke rc bus pasti keren👍
Does it also run on 16% nitro fuel??
Why didn't you lube the engine ?
where can i buy this? and how much is price
Pokoknya josss🙏🙏🙏🙏🙏😁😁😁😁😁
Keren
Belinya dimana bang?
where to buy this
It is available in India?
😊 5:15 what is this
Holy shit dude i can't believe you didn't snap the heads off those bolts using that impact but driver dam! Or pull the threads out of the block thats way too tight you're going
I think its has a clutch and can be adjusted to a max torque as desired. just enough to not snap the heads off
Where we can buy this type of engine
Boa noite como compro esse motor para chegar aqui no Brasil, Deve ser difícil com frete e imposto fiquei interessado nesse motor 2 tempo para esta no off-road nitro. Kkk
does that all come with the kit
Next level up from legos
Oil?
He is from India. Anyone Cant expect him doing this in the right way with the right tools.
Right dammmmm Punjabi 😂
Sehat selalu pokoknya
ohne ÖL zusammenbauen?
Có hàng bán ko 😅
Bang beli dimana dahh??
D mna tmpat jual mesin kaya gino mas
No flames 🔥??
Boleh tu
How the over head cam is oiled, if the nitro fuel has lubricant, it doesn't mean it can do all, note below piston area
Need to apply heat resistant grease to the camshaft and valve rockers. He did not do it
Beli dimana kak
Cadê a graxa no cabeçote? Cadê o óleo do motor ?
Yg kek gini bisa dibeli pake paylater gk sih? 😅
mesinnya gak pakai pelumas atau gimana bro
I would put it in a RC car or boat.
Serviria em RC truck escala 1/14 ?
@@diegoramos718 How cool would it be to make it water cooled in a RC boat. Lots of power in that RC boat probably too much.
How to buy the accessories??
Your from which country ???
Engine nya beli dmn ini ka?
Kiya price hy Pakistan ma dalevery mill sakti hy
Bang belinya dimana?
Om adakah cetakan cabin truk nyaayg dijual
Belinya dimana?
Can a drone be made with this engine?
Rusty plyers, the do all tool.😂
Kalo beli dimana n harga nya brp?
A Mini engine?
So amazing
belinya dimana bang
Beli nya dimana ?
Beli mesin kaya begitu dimana bang😁?
Banggod
belinya dimana mbakk, dan harganya
Where do I buy
Why you didn't use oil????
Bang beli dimana ya
Pie kabare kang? Suwe ra nongol
Beli dmna bang
Where you buy the engine
Precisa de óleo esse motor?
Acho q ss
beli dmn ini
Terjangkau gmna bang2 mahal ini mah
where you get that from
Di indonesia, ada yg jual gak ya?
Is it water cool ingine? What lubrication
Sistema di costruzione un po' rozzo, senza pre lubrificare i pezzi nell'asseblaggio. Comunque bravo