Такие модели с прозрачным корпусом надо ставить в учебных заведениях чтобы учащиеся понимали как работает мотор и видели весь процесс вживую!!! Очень круто получилось
Incredible demonstration of 2-stroke single-piston combustion motor. The builder is incredible. He built a combustion chamber out of transparent plexiglass and made it work. It is amazing how fast the piston is moving inside the transparent cylinder. I have a greater appreciation of combustion engines and how it has to work to generate power and torque.
10/10 you guys! I build engines for a living and getting to see stuff like this makes my whole week. I would LOVE to see this in collaboration with the slowmo guys or something to get super slow and clear footage of this work of art. 👍
Totally agree! I watch 2Stroke Stuffing and just don’t get what he’s trying ti do with his ports. Probably because I’m far more familiar with 4 stroke engines.
@@andylewis7360 No one gets what he is trying to do. He is doing too many things at once, has too many projects going on at once and tries to reinvent EVERYTHING from scratch. No wonder that he is running into constant issues and never sees much success with anything. He is just being way too chaotic. He should focus more on less things.
@@falco447 Yup. I think you’re right. Perhaps Alex is trying to emulate his hero Burt Munro just a little too much and do everything himself from first principles. Hopefully his new-found German friend group will help him to focus in more specific directions. He’s a good man. Success is in him. But at this rate it could take his whole life to let it come out.
REALLY informative video that helps visualize the function of piston windows and transfer ports. I think many of those who claim to understand how a 2 stroke works are only thinking of how an engine without tranfer ports would function
Hut ab für den Mut bei dem Projekt Danke für die viele Arbeit und Zeit die da drin steckt. Sowas muss man sich einfach anschauen Zeit 100% nicht verschwendet 😊😊
Taki model dwusuwowego i czterosuwowego cylindra z plexy powinien być w każdej podstawówce, przecież na tym tak genialnie można wytłumaczyć zasadę działania, że szok! Brawa dla ciebie Chylo!
Nice, I had a simson s51 when I was 16 back in 1987. East German moped. £500 on the road a Japanese moped was about £800 new. Crude but faster than the Japanese peds, there was a restriction in the exhaust header. I replaced it with one from a larger capacity mz can't remember which but I used to give 2 mates a lift out of town, 3 up no problem out on country roads. Good times 😆
We had challenges who can pack the most people on a simson. The record is 7 People!! One on the steering, 2 on the tank 3 on the actual seat and one on the package carrier...😅 awesome times!
@@NickTheQuick82 you didn't realise it at the time but you were an early eco warrior. 7 people from 50cc. Forget your tesla etc. A simson s51 is all you need 😆
Im semi retired now after many years of fixing all kinds of engines. Don't think it will go far but i really appreciate that you made the parts to make the video . Bravo!
I watched a channel on RUclips here where a couple guys from the USA made a plastic piston to try it in a old Polaris 4 wheeler that they did accomplish doing & they had a person driving it around on a airport road for quite some time just running the heck out of it until it finally died . What amazed me the most was how long it actually lasted before the piston started to melt down and loosing compression and shutting down. Can't remember the name of the channel but if you look on RUclips you should be able to find it . From watching it this model Polaris ATV 4 wheeler looked very similar to my 90s Polaris 350L liquid cooled 350 2 stroke that I had for a number of years to mainly use it for work duties on my property until I ended up selling it being it was in need of doing a full top end rebuild and decided to sell it and get a 4 stroke model but ended up buying a 49 Farmall C tractor with a hitch to haul wood on my trailer and it has a Woods 6 foot belly mower on it to mow my property with instead of using my Sears rider with a 42 inch deck to do it all & by buying the Farmall C tractor it literally shaved off 3 hours of mowing time & it's more comfortable to boot. Some of the parts for the Sears which is a 90s model are getting hard to find because nobody is making all of the parts for it now but for this old Farmall C tractor I can get everything I need for it still either new or good used parts & for the 10 years I've owned it its been stone reliable other than oil and filter changes each spring & 1 6 volt battery just this spring and a coolant flush & that's been it other than I changed the gear oil for the transmission & differential which takes 5 gallons of gear oil and did it just because i didn't know when the last time it had been changed & figured i might as well just do it. The Sears gets used up close by the house in the areas I can't get in with the Farmall which helps on wear and tear on it so I'm hoping to get a few more years out of it before it's ready for the scrap pile because this Sears is made like everything now where it gets used then eventually breaks down and parts aren't available for it because we have a throw away society now unfortunately and the new small tractors are cheap junk as well but way overpriced.
Glass at that thickness would be plenty strong enough. It's the heat cycling that would be an issue. The warm up procedure would be obnoxious and forming the jug to the proper dimensions would be prohibitively expensive. But it could work. Your average RUclipsr wouldn't have the resources to pull it off though.
@@Reichsritter ahhhh then let me tell you, there is transparent aluminium! also called (aluminium oxynitride) its a transparent ceramic composed of aluminium, oxygen and nitrogen. Used on space ship windows, the tips of ballistic missiles to house the camera and its so strong that a 1.6 inch thick piece can stop a 50.cal round, in comparison you would need 8 inches of layered armoured glass to achieve the same result.
@@LilLizabeth thats sick as hell. but how expensive is it? could it work as an engine block? the idea screams translucent N64s from the 90s lol. it would look amazing on a motorcycle or quad.
Das ist so geil, mehr Einblick geht glaube ich nicht, vielen dank für dieses lehrreiche und sehr unterhaltsame video Ich kann mir gut vorstellen wieviel arbeit das ist, tolle Arbeit vielen vielen dank
That is so cool😄👍 I can’t believe the plastic can handle the heat for so long. The side crank case cover looks pretty cool as well. Can see the flow of oil throughout the gear box. Awesome build👍
Hi I am high school student In physics there is topic of engine My professor showed this video I get an idea of how real engine works and saw a practical of it Thank you for doing this
А смысл? Если человек, без наглядного пособия, не способен понять принцип работы ДВС, то и механик из него не получится. Так, для зрелищноти шоу, нормально.
Исключительно красивая и качественная работа! Уважение талантливым мастерам! Спасибо за прекрасное видео! Долговечность мотора, в данном случае, не главное. Главное - навыки, знания и светлый ум!)
Lol I saw you holding that block on the drill press and the first thing that went through my mind was "that's friggin sketchy" and not one second later it breaks loose🤣. My years as a machinist have taught me that's a _really_ bad idea, you never hold your workpiece with your hands unless it's a big part and very small drill, fingers have been lost and wrists broken by this sort of thing, be careful... Awesome video though, it's beautiful watching a see-through engine run.
Это был очень тя желтый труд. И у вас всё получилось ! Это невероятно интересно. Подобное надо внедрить в производство, конечно доработать качество материала. Зато как здорово, не нужно выкручивать свечи для проверки её работоспособности, всё ВИДНО ХОРОШО ! КЛАСС !!!
🟥What a marvel to see the workings of a gasoline engine live. A brilliant invention of mankind. Thank you CHYLO RACING for this work and for giving us this pleasure. (Qué maravilla poder ver en directo el funcionamiento de un motor de gasolina. Un invento genial de la humanidad. Gracias por este trabajo y darnos este placer).
Молодцы 👍👍👍 Многие знают как работает ДВС.Но как происходит процесс непосредственно внутри цилиндра видели единицы.Теперь благодаря этим умельцам процесс работы ДВС визуально увидели и мы.👍👍👍👍
EU SEMPRE QUIS VÊ UM MOTOR FUNCIONANDO ASSIM, EU JA HAVIA PROCURADO NO RUclips, MAS NÃO ENCONTREI NENHUM VIDEO. ACHO QUE O DE VOCÊS É O PRIMEIRO, PARABÉNS. ESTOU ENCANTADO COM O SEU TRABALHO. MEU SONHO É TRABALHAR NUMA RETIFICA. 🥰. MAS NÃO TENHO EXPERIÊNCIA, MAS APRENDO TUDO E RÁPIDO.
you've done a great job, thanks for this magnificient work, I think this kind of engines must be used for teaching purposes at driving license courses for clear grasping how an engine works
Génial!!! Vous pouvez être fier de vous! Quel formidable support pour expliquer le principe du moteur 2T à des élèves étudiants en mécanique ou autre !!! Bravo...
@@Nic0_0 Si à 12 ans tu maitrises les principes du moteur 2T/4T alors bravo à toi, je suis sûr qu'il te reste encore des tas de choses à apprendre dans cette discipline...Continue ! ;)
I think you know whats to do next: Drill the size of cylinder bigger in diameter and insert a glas tube correspondingly. And of course holes for the ports need to be machined to the glaszylinder at the right positions as well. Maybe the glastube may come out of a very cold fridge and shrink fit into the slightly warmed cylinder with the increased diameter. (But first of all i would go to a glasmaker and tell him about my idea, he will have further advice. Maybe supply of chemical firms as well may know more about glas cylinders with best most precise cylindrical inner bore.) And you could try to insert a camera sideways into a newly made camera bore in the cylinder or head as well - to try to make clearer close up fotos in slowmo. Thank you for sharing!
@@stuntmedia4657 my thoughts exactly, as it just a display item a scondary system cooling system. Use maybe a large chilled reservoir of distilled and filtered water and the water may not be visible in the cylinder head.
Setiap detik memang banyak pembakaran pantasan oli cepat di ganti jika jarak motor di tempuh cukup jauh dan kalo ga jauh naik motor jangan sering ganti oli cukup seadanya di pake😊
Здесь слов нет,одни эмоции в хорошем понимании этого всего. Но ни кто ни когда не вспоминает главных разработчиков двух и четырёх тактных двигателей, а они были. Нужно придумать прозрачный металл и тогда жизнь самоделкиных заиграет новыми красками и сюжетами.
Мужик ты просто супер! Твой дети будут очень счастливы! Слов нет! Одни положительные эмоции! Так держат! С твоей смекалкой тебе море по колено и горы по плече!🤘👍🤘👍🤘
Cool, don't you love it when it comes out how you designed it to do. That slow motion footage of the combustion process is neat. Is that acrylic you used for the combustion chamber and head? Isn't that the only transparent material tough enough to take the pressure and heat? It looked like the aluminum piston had melted there for a second but it was just the acrylic melting some or scratching and the exhaust port that made it look that way. Great video and a great vintage bike to modify like that 👍
If there were water galleries with a high reservoir, there would be circulation by boiling 100º!, and leaving the carburetor at the level!! lol very good man!!
Using a basic tempered glass sleeve that you make have vertical and horizontal grooves in it will allow for it to survive the heat issues for longer, especially if you can cool around it with clear fluid. I think the horizontal might be perfect for a pump that you have for holes around those areas, that go with the piston movement. You would be able to pump fluid to the sides and use basic air cooling with some glass fins. You would need to make it thick enough, the sleeve, but also have it have something of a curve or bend to stick into the head and a bottom separate part to be able to have it stay put. So you could have cooling, a less expanding and higher friction clear part, it will heavily rely on the tempered glass thickness and the sizing of all the grooves. It would last much longer and maybe even be a viable 2 stroke engine.
Jeden mały błąd podążać dorabiania dołu cylindra. Moim zdaniem jako mechanika i pasjonata Simsona którego także tuningowałem od najmłodszych lat dół cylindra powinien być delikatnie wpuszczony w sam cylinder zapewniło by to lepszą pracę. A tak to super robota.
człowieku on to wie jest milion razy lepszy od ciebie to miało chodzić tylko chwilę bo się i tak roztopi od temperatury ja nwm czy ty myślałeś że oni będą na tym robić 20tys. kilometów czy co haha
Any ideas for next videos? :D
Saludos desde argentina!
Muy entretenidos tus videos
transparentny wydech i uchwycić rezo ::
Kartery przezroczyste? Do zrobienia?
-
-
Transparent Membrane Box
bigbore this cilinder to 85cc and 4 port, add big intake valve and 28mm carb ... so first plexi cylinder with dyno run
Такие модели с прозрачным корпусом надо ставить в учебных заведениях чтобы учащиеся понимали как работает мотор и видели весь процесс вживую!!! Очень круто получилось
У меня на учебе были макеты в разрезе
надо развивать пространственное мышление учеников чтоб не надо было делать прозрачные движки
для 2 т , не для 4 т
И стоили ли усилия результата?..
Ага, проводить демонстрацию для потока и каждый год новый точить.
Incredible demonstration of 2-stroke single-piston combustion motor. The builder is incredible. He built a combustion chamber out of transparent plexiglass and made it work. It is amazing how fast the piston is moving inside the transparent cylinder. I have a greater appreciation of combustion engines and how it has to work to generate power and torque.
for a moment after he started the bike i was like where is the piston it is insane how fast it moves
Hi Duck. Great comment! 💯 Is this material heat resistant and safe for regular riding?
this comment has to be ai generated
@@gabrielesposito2735watch the whole video to see why it is not
Really amazing work!!!
Especially to see that on "SIMSON" my unfulfilled dream from young age 😂❤
Your work visualizes what an internal combustion engine looks like. I respect you for putting in so much effort for just a few minutes.
The amount of Joy he experienced when it worked shows the true hardowork of an Engineer. Good work, man!!
10/10 you guys! I build engines for a living and getting to see stuff like this makes my whole week. I would LOVE to see this in collaboration with the slowmo guys or something to get super slow and clear footage of this work of art. 👍
Totally agree! I watch 2Stroke Stuffing and just don’t get what he’s trying ti do with his ports. Probably because I’m far more familiar with 4 stroke engines.
@@andylewis7360 No one gets what he is trying to do. He is doing too many things at once, has too many projects going on at once and tries to reinvent EVERYTHING from scratch. No wonder that he is running into constant issues and never sees much success with anything. He is just being way too chaotic. He should focus more on less things.
@@falco447 Yup. I think you’re right. Perhaps Alex is trying to emulate his hero Burt Munro just a little too much and do everything himself from first principles. Hopefully his new-found German friend group will help him to focus in more specific directions. He’s a good man. Success is in him. But at this rate it could take his whole life to let it come out.
that would be amazing!!!!!!!
@@andylewis7360 2 strokes builders know porting makes power . Been porting myself since 1971 .
REALLY informative video that helps visualize the function of piston windows and transfer ports. I think many of those who claim to understand how a 2 stroke works are only thinking of how an engine without tranfer ports would function
Мужики, огромный респект. Столько труда ради пяти минут удовольствия. Оно того стоило! 🔥🔥🔥🔥👍👍👍👍👍👏👏👏👏👏
Я бы поменял знак препинания на вопросительный - ,,оно того стоило?,,
@@user-Tlink244ew
7,3 ляма просмотров за чуть больше месяца. Наверное, стоит.
@@user-Tlink244ew 8,5 ляма просмотров, это больше чем стояло))
@@user-Tlink244ew Точно , херня полная .
@@jameswebb5099 денег заработали, больше чем ты за 3 года
Hut ab für den Mut bei dem Projekt
Danke für die viele Arbeit und Zeit die da drin steckt.
Sowas muss man sich einfach anschauen
Zeit 100% nicht verschwendet 😊😊
Taki model dwusuwowego i czterosuwowego cylindra z plexy powinien być w każdej podstawówce, przecież na tym tak genialnie można wytłumaczyć zasadę działania, że szok!
Brawa dla ciebie Chylo!
This is a thing of beauty. It's made 2024 worthwhile. Should have one in every school
Nice, I had a simson s51 when I was 16 back in 1987. East German moped. £500 on the road a Japanese moped was about £800 new. Crude but faster than the Japanese peds, there was a restriction in the exhaust header. I replaced it with one from a larger capacity mz can't remember which but I used to give 2 mates a lift out of town, 3 up no problem out on country roads. Good times 😆
We had challenges who can pack the most people on a simson. The record is 7 People!! One on the steering, 2 on the tank 3 on the actual seat and one on the package carrier...😅 awesome times!
@@NickTheQuick82 you didn't realise it at the time but you were an early eco warrior. 7 people from 50cc. Forget your tesla etc. A simson s51 is all you need 😆
Im semi retired now after many years of fixing all kinds of engines. Don't think it will go far but i really appreciate that you made the parts to make the video . Bravo!
I watched a channel on RUclips here where a couple guys from the USA made a plastic piston to try it in a old Polaris 4 wheeler that they did accomplish doing & they had a person driving it around on a airport road for quite some time just running the heck out of it until it finally died . What amazed me the most was how long it actually lasted before the piston started to melt down and loosing compression and shutting down. Can't remember the name of the channel but if you look on RUclips you should be able to find it . From watching it this model Polaris ATV 4 wheeler looked very similar to my 90s Polaris 350L liquid cooled 350 2 stroke that I had for a number of years to mainly use it for work duties on my property until I ended up selling it being it was in need of doing a full top end rebuild and decided to sell it and get a 4 stroke model but ended up buying a 49 Farmall C tractor with a hitch to haul wood on my trailer and it has a Woods 6 foot belly mower on it to mow my property with instead of using my Sears rider with a 42 inch deck to do it all & by buying the Farmall C tractor it literally shaved off 3 hours of mowing time & it's more comfortable to boot. Some of the parts for the Sears which is a 90s model are getting hard to find because nobody is making all of the parts for it now but for this old Farmall C tractor I can get everything I need for it still either new or good used parts & for the 10 years I've owned it its been stone reliable other than oil and filter changes each spring & 1 6 volt battery just this spring and a coolant flush & that's been it other than I changed the gear oil for the transmission & differential which takes 5 gallons of gear oil and did it just because i didn't know when the last time it had been changed & figured i might as well just do it. The Sears gets used up close by the house in the areas I can't get in with the Farmall which helps on wear and tear on it so I'm hoping to get a few more years out of it before it's ready for the scrap pile because this Sears is made like everything now where it gets used then eventually breaks down and parts aren't available for it because we have a throw away society now unfortunately and the new small tractors are cheap junk as well but way overpriced.
То редкое видео из серии "теперь я видел всё". Спасибо вам, парни. И поздравляю с удачным запуском двигателя.
me encanta te entedi todo
Это великолепно, ребята. Работа аккуратная! Берегите себя, удачи вам!
if only something like this would last without melting I'd drive it around at night all the time. Awesome content keep up the good work !!!!
Unfortunately there's no transparent steel and glass is too fragile
I just showed the piston in operation to two girls and they got all porno about it!
Quite frankly I don't know why I bother!
Glass at that thickness would be plenty strong enough. It's the heat cycling that would be an issue. The warm up procedure would be obnoxious and forming the jug to the proper dimensions would be prohibitively expensive. But it could work. Your average RUclipsr wouldn't have the resources to pull it off though.
@@Reichsritter ahhhh then let me tell you, there is transparent aluminium! also called (aluminium oxynitride) its a transparent ceramic composed of aluminium, oxygen and nitrogen. Used on space ship windows, the tips of ballistic missiles to house the camera and its so strong that a 1.6 inch thick piece can stop a 50.cal round, in comparison you would need 8 inches of layered armoured glass to achieve the same result.
@@LilLizabeth thats sick as hell. but how expensive is it? could it work as an engine block? the idea screams translucent N64s from the 90s lol. it would look amazing on a motorcycle or quad.
Sauber gemacht 👍. Ein komplett transparenter Vergaser wäre noch interessant, sodass man die Zerstäubung des Kraftstoffes schön sieht. Beste Grüße
Тоже подумал об этом
das wäre der Wahnsinn oder watt?
gibt ein Video (How does a Carburetor work?) vom Kanal ,,SmarterEveryDay,,
Transparente Damenunterwäsche finde ich noch interessanter.
I wonder whats the mileage before it overheats and melts😂😂😂
that's awesome to see how the piston and spark plug work alongside each other like that!
Next, Stone piston
Might be impossible right now idk if you could get stone that smooth
Plastic or wood piston
@@buggsbunny01 mármore, você pode deixar o mármore muito liso, porém é muito pesada
thermite piston!
Cast lava block
Bro did all this work just to show us firsthand the art of Internal combustion 🔥 what a legend 🤙
Das ist so geil, mehr Einblick geht glaube ich nicht, vielen dank für dieses lehrreiche und sehr unterhaltsame video
Ich kann mir gut vorstellen wieviel arbeit das ist, tolle Arbeit vielen vielen dank
That is so cool😄👍 I can’t believe the plastic can handle the heat for so long. The side crank case cover looks pretty cool as well. Can see the flow of oil throughout the gear box. Awesome build👍
Охлаждение...ноль.
It didn’t hold up for very long but still cool. 😎
Hi
I am high school student
In physics there is topic of engine
My professor showed this video
I get an idea of how real engine works and saw a practical of it
Thank you for doing this
В замедленном показе отличное пособие для демонстрации работы ДВС 👍
А смысл? Если человек, без наглядного пособия, не способен понять принцип работы ДВС, то и механик из него не получится. Так, для зрелищноти шоу, нормально.
@@dmitrykaplun9063 Ну механики далеко не все . А в школе на уроке показать будет гораздо интересней чем тупо рассматривать древние картинки в учебнике
Не всех ДВС, а только 2т, в 4т абсолютно другой принцип
@@qawdes9038 Принцип тот же, расширение при сгорании раскалённых газов.
если хотя бы 1000кс сняли, то да, а то тут пых тут жмых.
The amount of work you put in making this engine is unbelievable 💪
Czekam aż cały simson będzie przezroczysty 😍😍
Отличный эксперимент увидеть вживую изнутри двигателя, как он работает!
Respekt!!! Ein absolut fantastisches Projekt und dann noch mit einer Legende, der Simson. Einfach wahnsinn.
Исключительно красивая и качественная работа! Уважение талантливым мастерам! Спасибо за прекрасное видео! Долговечность мотора, в данном случае, не главное. Главное - навыки, знания и светлый ум!)
нахваливаешь шлак?
Lol I saw you holding that block on the drill press and the first thing that went through my mind was "that's friggin sketchy" and not one second later it breaks loose🤣. My years as a machinist have taught me that's a _really_ bad idea, you never hold your workpiece with your hands unless it's a big part and very small drill, fingers have been lost and wrists broken by this sort of thing, be careful...
Awesome video though, it's beautiful watching a see-through engine run.
Fantastic! Congratulations.Every Mechanical Engineering universite must have this engine tô show.
Podziwiam zapał. Fajnie wyszło, brakuje tylko super szybkiej kamery.
na kanale warped perception mozesz w slo mo obejrzec
@@krystiankrychu2507 what language is? ruso? or germany?
@@yeimerortega7522 poland
Jungs,geile Idee und Umsetzung. Beide Daumen hoch😊 Bei mir seid ihr für den 2-Takt-Nobelpreis nominiert😊 Grüße aus Schwaben
Awesome job guys!! Very impressive indeed. Great to see how a small engine works in all its glory.
Проделана колоссальная работа,с меня лайк, приятно смотреть,желаю успехов в продвижении канала🔥👍👍👍👍👍
Это был очень тя желтый труд. И у вас всё получилось ! Это невероятно интересно.
Подобное надо внедрить в производство, конечно доработать качество материала.
Зато как здорово, не нужно выкручивать свечи для проверки её работоспособности, всё ВИДНО ХОРОШО !
КЛАСС !!!
🟥What a marvel to see the workings of a gasoline engine live. A brilliant invention of mankind. Thank you CHYLO RACING for this work and for giving us this pleasure. (Qué maravilla poder ver en directo el funcionamiento de un motor de gasolina. Un invento genial de la humanidad. Gracias por este trabajo y darnos este placer).
This is what youtube is all about.. showing us mega things like this. Brilliant.
Nichts ist unmöglich, Chylo. :D
Super Arbeit!
Молодцы 👍👍👍
Многие знают как работает ДВС.Но как происходит процесс непосредственно внутри цилиндра видели единицы.Теперь благодаря этим умельцам процесс работы ДВС визуально увидели и мы.👍👍👍👍
love this, your reaction to it starting and the engine locking up were the best lol lasted way longer than i would think honestly with that heat
EU SEMPRE QUIS VÊ UM MOTOR FUNCIONANDO ASSIM, EU JA HAVIA PROCURADO NO RUclips, MAS NÃO ENCONTREI NENHUM VIDEO. ACHO QUE O DE VOCÊS É O PRIMEIRO, PARABÉNS. ESTOU ENCANTADO COM O SEU TRABALHO.
MEU SONHO É TRABALHAR NUMA RETIFICA. 🥰. MAS NÃO TENHO EXPERIÊNCIA, MAS APRENDO TUDO E RÁPIDO.
Очень аккуратная работа! Молодцы, ребята! Продолжайте дальше!👍🤝
One of the coolest videos on RUclips.
Magnificoooooooo!!!!
Te felicito!
Muy bonito y laborioso proyecto.
Fuerte abrazo desde la ciudad de México.
really nice ahah, we want a TRASPARENT PIPE
Faszinierend, wenn Menschen ihr Handwerk so perfekt beherrschen. Respekt!
Świetna robota!! Fajnie było to zobaczyć . Podziwiam zapał. Fajnie wyszło, brakuje tylko super szybkiej kamery..
Сколько труда вложено в это видео...
Eh sì hai proprio ragione 👍💪🦾
Вот это реально круто. Вот таким мужикам лайки надо ставить в интернете.
А не тем, которые кривляются на камеру
Muito bom, o cara é mecânico de moto, torneiro, eletricista.......,👏👏👏👏👏Professor Pardal. Parabéns 👍💯🏍️🛵🏍️🛵🏍️🛵🏍️
you've done a great job, thanks for this magnificient work, I think this kind of engines must be used for teaching purposes at driving license courses for clear grasping how an engine works
Your very intelligent Bro...your a Scientist .... I appreciate your advance knowledge . God Bless you...
moje pierwsze próby wiercenia w akrylu były kiepskie :D dużo poleciało zaklęć i w końcu nie pękało
Tôi nghĩ rằng khi chạy nâu thì không chịu nổi vì bu ri nóng lên làm chảy
Génial!!! Vous pouvez être fier de vous! Quel formidable support pour expliquer le principe du moteur 2T à des élèves étudiants en mécanique ou autre !!! Bravo...
Ты смеёшься мне 12 лет и я знаю как работает 2T 4T моторы и как работает Роторный Двигатель
@@Nic0_0 Si à 12 ans tu maitrises les principes du moteur 2T/4T alors bravo à toi, je suis sûr qu'il te reste encore des tas de choses à apprendre dans cette discipline...Continue ! ;)
I think you know whats to do next:
Drill the size of cylinder bigger in diameter and insert a glas tube correspondingly. And of course holes for the ports need to be machined to the glaszylinder at the right positions as well. Maybe the glastube may come out of a very cold fridge and shrink fit into the slightly warmed cylinder with the increased diameter. (But first of all i would go to a glasmaker and tell him about my idea, he will have further advice. Maybe supply of chemical firms as well may know more about glas cylinders with best most precise cylindrical inner bore.)
And you could try to insert a camera sideways into a newly made camera bore in the cylinder or head as well - to try to make clearer close up fotos in slowmo.
Thank you for sharing!
I think he needs to drill holes around the cylinder to create path for a liquid coolant to pass through and cooloff the combustion overheating
@@stuntmedia4657 my thoughts exactly, as it just a display item a scondary system cooling system. Use maybe a large chilled reservoir of distilled and filtered water and the water may not be visible in the cylinder head.
Kolejny świetny film :)
Zdrowia i smacznej kawusi życzę
Setiap detik memang banyak pembakaran pantasan oli cepat di ganti jika jarak motor di tempuh cukup jauh dan kalo ga jauh naik motor jangan sering ganti oli cukup seadanya di pake😊
Jak by ktoś mógł wam to ze szkła zrobić. To był by motyw . Kawał dobrej roboty :)
Ze szkła borokrzemianowego
@@Wilma5532 Дякую !)
Cześć! zajebista robota. Jaki to olej w skrzyni?
zielony, to możliwe że to motul 300v
the trust is amazing I would be so scared to have my face so close to this amazing work of art
Parabéns. Foi um belo trabalho. Muito bom ver como funciona o motor 2 tempo
Ale ogień! Gratulacje, super się ogląda.
Hätte nicht geglaubt,daß es funktioniert. Super gemacht. Absolut Spitze. Ich bin fasziniert. ❤❤❤❤
Здесь слов нет,одни эмоции в хорошем понимании этого всего. Но ни кто ни когда не вспоминает главных разработчиков двух и четырёх тактных двигателей, а они были. Нужно придумать прозрачный металл и тогда жизнь самоделкиных заиграет новыми красками и сюжетами.
Придумай прозрачній металл. Анало говнет получишь!
Мужик ты просто супер! Твой дети будут очень счастливы! Слов нет! Одни положительные эмоции! Так держат! С твоей смекалкой тебе море по колено и горы по плече!🤘👍🤘👍🤘
I love to see the way of work from this 2 stroke engine! AND also love when you realize that! HAHAH congratulations
Znakomicie to wyglądało jestescie najlepsi👌👍😁
Muito bonito de se ver, embora o resultado já era de se esperar. Muito lindo ver um motor funcionando
Need some off Scotty's transparent aluminum. Well done! Thank you for sharing. Have a blessed day.
Egg do trabalhão que deu pra fazer isso. 😄 Parabéns 👏🏽👏🏽😃
Cool, don't you love it when it comes out how you designed it to do. That slow motion footage of the combustion process is neat. Is that acrylic you used for the combustion chamber and head? Isn't that the only transparent material tough enough to take the pressure and heat? It looked like the aluminum piston had melted there for a second but it was just the acrylic melting some or scratching and the exhaust port that made it look that way. Great video and a great vintage bike to modify like that 👍
That's great congratulations
If there were water galleries with a high reservoir, there would be circulation by boiling 100º!, and leaving the carburetor at the level!! lol very good man!!
Классно. Оно того стоило 100%.👋
Tolle Arbeit ❤
Luar biasa untuk sebuah pengerjaan yg sdh terprediksi sebelumnya. Mencobanya,bukanlah sesuatu yg disukai banyak orang
Esse vídeo mereceria uma super câmera lenta, seria incrível.
Quedó de lujo felicidades Saludos desde Xalapa Ver. México
this has got to be the coolest video i've seen on youtube
Using a basic tempered glass sleeve that you make have vertical and horizontal grooves in it will allow for it to survive the heat issues for longer, especially if you can cool around it with clear fluid. I think the horizontal might be perfect for a pump that you have for holes around those areas, that go with the piston movement. You would be able to pump fluid to the sides and use basic air cooling with some glass fins. You would need to make it thick enough, the sleeve, but also have it have something of a curve or bend to stick into the head and a bottom separate part to be able to have it stay put. So you could have cooling, a less expanding and higher friction clear part, it will heavily rely on the tempered glass thickness and the sizing of all the grooves. It would last much longer and maybe even be a viable 2 stroke engine.
Borosilicate glass.
Познавательно даже очень хотя я с детства знал весь принцип работы моторов
Und jetzt bitte ein 4 Zylinder Direkteinspritzer mit Turbolader, alles Transparent.😂😂
Echt eine Meisterleistung , Sitze.👍👍
Jeden mały błąd podążać dorabiania dołu cylindra. Moim zdaniem jako mechanika i pasjonata Simsona którego także tuningowałem od najmłodszych lat dół cylindra powinien być delikatnie wpuszczony w sam cylinder zapewniło by to lepszą pracę. A tak to super robota.
człowieku on to wie jest milion razy lepszy od ciebie to miało chodzić tylko chwilę bo się i tak roztopi od temperatury ja nwm czy ty myślałeś że oni będą na tym robić 20tys. kilometów czy co haha
O cara é um gênio, louco, aventureiro, não sei descrever, mais ficou top demais.
Молодцы парни, круто выглядит и наглядно показывает как работает!🤩👏👏👏👍
Świetna robota!! Fajnie było to zobaczyć 😀
Richtig geil. Man konnte die Funktion und Aktivität des Kolben super erkennen und beobachten. :D
Огонь 🔥🔥🔥🔥🔥
Гильзу нужно из стекла, Лайк 👍 и коментарий в поддержку канала,
シリンダー内部の様子が見えて
ピストンとスパークプラグの点火するタイミングなどがよくわかりました
素晴らしいです👍
No to teraz łożyska i kartery 😂
Muito didático, parabéns!
スゴイ！エンジンのシリンダー・シリンダヘッドをアクリル樹脂で作ろうという発想が素晴らしいし、実際にエンジンとして動くものができるという事実と技術に驚愕する。お見事！
Pity we can’t make fully transparent politicians, that really would be something.
Or with a shorter duty-cycle, like this engine.
teraz kartery przezroczyste
Ребята, это ШЕДЕВР!!🔥🔥🔥👍🏻
Muito bom em 👏👏👏
Człowiek już zapomnial że miał Simsona a tu proszę co się dzieje 😉
Thxz for all your work, that was cool, engines turn lots faster than people know.