Caught a bunch of Dad’s last week on the homemade trap…. I suspended a box inside for the bait so the dad’s have to crawl inside to get to the bait… I also used the top of a bottle as a cone on each end…. it worked… thanks for the video!
Good idea. Crawfish are plentiful and can be found in nearly any body of fresh water whether stream, pond, or lake. If SHTF, this kind of stuff can help you survive.
Grand trap design. Thanks for sharing. I plan on building about 6 of these tomorrow when dollar tree opens up,with a few minor modifications. Will let you know how it goes.
Big Hawaiian punch type bottles might work as your float instead of 2 literally bottles. They have the rectangle handle so you don't need to compromise the air in the bottle. My father in law uses one with chicken, string and a hook to catch the snapping turtles in his pond.
Just remember Louisiana Wildlife and Fisheries crawfish traps requirement has to be 3/4 by 11/16 square, or larger, a three-quarter inch hexagon chicken wire or larger, With a $15 trapping License up for 35 traps Max, Telling the agent you didn't know that will not get you out of a $250 fine
Since it has been brought to my attention by a viewer I will address this. Always check the regulations in the state and area you live. This trap is made for California regulation. Other states won’t allow this type of trap. Thank you for the information 99neworleans.
I've been searching (and will continue doing so, though I am certain I once knew) the regs for trap regs for Iowa. But I know in some states they will treat you like committed the worst felony imaginable if your traps aren't up to code lol.
A hangman’s knot would also work for securing the rope to the trap, and then you don’t have to use the shrink tubing and zip ties. I personally use the same knot when putting on a hook or swivel on my fishing rod. And another thought, Dollar tree also sales paracord that is a little stouter than that plastic rope.
Tuck the rope on the trap end back through itself 3 times if you don't know how to splice. Then you do not need a ZIP tie or heat shrink. After using our traps a few times, we did not get many crawfish? When we swam over the trap lines, we found 50-100 chewing on the lines which had been contaminated with the smell of bait by keeping them in the trap as you do. Bad idea. We now use a short loop to tie to on the trap and keep the line in a clean bucket during transport. Our traps fold open at the center so they nest for storage and transport.
I am absolutely flabbergasted. I have over 20k views on this video. Thank you all for the support. Add a comment of what you all want to see in other videos.
Pillow traps are good for setting by hand so the hole isn't the wrong way. But if you don't know how deep the water is or if you don't have waiters use a cylinder so it doesn't matter what side it lands on if you throw it out.
Pillow traps work just as well if not better in some situations. These small cylinders are for smaller spots. You can also place these by hand if you choose to. I’ll be shooting a new video and show different ways of placing these.
That's a cool trap, but it wouldn't be legal in Washington State, but with Rot Cord instead of the bread tie, it would be legal.. That's for sharing this trap.
So sorry for the late response. I’m not sure on the measurements but you can always measure it at the store you get them from. The hole at the end is still pretty small. Nice part is you can customize it so that it fits regulations.
How about using some wire mesh from your local hardware store instead of all the chinese made plastic junk from the dollar store. Ya I get it, things are expensive. BUTT, if you just have a little patience and support your local stores and buy USA made materials, things will get better and cheaper in the future. Crayfish don't give a shit what your trap is made from, but you should.
These wire baskets are not plastic. They are wire baskets coated in a black plastic type paint. It’s not a matter of things being expensive either. It’s just a matter that you could make something on the cheap if you wanted to.
Развлечения
Thank you for showing us how to build a crayfish trap and you showed us how to make it so cheaply.
Your very welcome. Hope you have fun building one of your own.
Caught a bunch of Dad’s last week on the homemade trap…. I suspended a box inside for the bait so the dad’s have to crawl inside to get to the bait… I also used the top of a bottle as a cone on each end…. it worked… thanks for the video!
That’s absolutely amazing. Glad you got a bunch. I need to revisit this and show my catch of craws.
Good idea. Crawfish are plentiful and can be found in nearly any body of fresh water whether stream, pond, or lake. If SHTF, this kind of stuff can help you survive.
That’s kind of why I started fishing. Great skill to have.
I'm so happy that you saved me money on traps! It's a little fun project to do at home too!
They are super easy and fun to build.
Thanks for sharing your Dollar store crawfish trap and I also like some of the tips left by viewers...
Thank you for the comment. My viewers have great advice.
Nice little DIY project! Thanks!
Thank you. I will have another DIY video coming out in two weeks.
Grand trap design. Thanks for sharing. I plan on building about 6 of these tomorrow when dollar tree opens up,with a few minor modifications. Will let you know how it goes.
That sounds great, how did they turn out?
I’ve been looking for a good one to make forever thank you this video helped me a lot😊
Your very welcome. Come back and let me know how it turned out.
Another one of your great ideas.
Thank you very much.
Awesome video, doing this with the kids tomorrow.
Come back and let me know how it turns out,
Exactly what i did. I used some wire mesh for the funnel openings
I ended up not adding the funnels yet. I want to revisit this video and make a upgrade video
Big Hawaiian punch type bottles might work as your float instead of 2 literally bottles. They have the rectangle handle so you don't need to compromise the air in the bottle. My father in law uses one with chicken, string and a hook to catch the snapping turtles in his pond.
That could work as well. I used the ones I had on hand. They work great. I actually have another video coming out for an update on these traps.
Actually a great idea, thanks for the info I’ve just subbed, looking forward to more videos.
I thank you for your kind words. I have subscribed to your channel as well.
Just remember Louisiana Wildlife and Fisheries crawfish traps requirement has to be 3/4 by 11/16 square, or larger, a three-quarter inch hexagon chicken wire or larger, With a $15 trapping License up for 35 traps Max, Telling the agent you didn't know that will not get you out of a $250 fine
Thanks for the information. This trap is built for California. I really do appreciate the information. Thank you.
Since it has been brought to my attention by a viewer I will address this. Always check the regulations in the state and area you live. This trap is made for California regulation. Other states won’t allow this type of trap. Thank you for the information 99neworleans.
I've been searching (and will continue doing so, though I am certain I once knew) the regs for trap regs for Iowa. But I know in some states they will treat you like committed the worst felony imaginable if your traps aren't up to code lol.
Great idea. 👍👍 I will definitely try it. Dollar store here I come😊
Hope to hear how it works out for you. If you do something different let me know what.
For sure. I want to try using crawfish for bait.
I hear it is great for trout
Cool i found this video after i ordered trap from amazon. Next stop dollar store
Super cheap and easy to build these. Let me know how it turns out.
Nice! Gonna build one tomorrow 👍
Hope you send a pic of the one you build.
A hangman’s knot would also work for securing the rope to the trap, and then you don’t have to use the shrink tubing and zip ties. I personally use the same knot when putting on a hook or swivel on my fishing rod. And another thought, Dollar tree also sales paracord that is a little stouter than that plastic rope.
I like that idea, it would help to be able to remove the rope.
This is great, I'll have to check my local laws to see if I can build one to use.. thanks
Always good to check local laws.
Great tips, thank you.u
You are so welcome!
MacGyver..thanks for sharing...
Your welcome.
Good info bro 👍 I was actually going ta get a trap at Bi-Mart but, think I'll hit the Dollar Tree instead 👊
Did you end up making one? How did it turn out?
Tuck the rope on the trap end back through itself 3 times if you don't know how to splice. Then you do not need a ZIP tie or heat shrink. After using our traps a few times, we did not get many crawfish? When we swam over the trap lines, we found 50-100 chewing on the lines which had been contaminated with the smell of bait by keeping them in the trap as you do. Bad idea. We now use a short loop to tie to on the trap and keep the line in a clean bucket during transport. Our traps fold open at the center so they nest for storage and transport.
That’s great advice. I haven’t had many problems with mine doing that but I can definitely see that happening.
The Amazon trap is now 9 bucks. Can't beat that
That’s cool.
I am absolutely flabbergasted. I have over 20k views on this video. Thank you all for the support. Add a comment of what you all want to see in other videos.
On the entrance to the trap sure a wire pencil holder. It's the same wire mesh and it's tapered...
That’s a great idea. I have some that I need to add to them.
Pool noodles work great for floats.
Yes they do. It’s just easier to put your fishing ID number on the bottle.
Hey was just wondering, what do you think about pillow traps? Would they work as good as these cylinder traps?
Pillow traps are good for setting by hand so the hole isn't the wrong way. But if you don't know how deep the water is or if you don't have waiters use a cylinder so it doesn't matter what side it lands on if you throw it out.
Pillow traps work just as well if not better in some situations. These small cylinders are for smaller spots. You can also place these by hand if you choose to. I’ll be shooting a new video and show different ways of placing these.
The garden plant ties are also @ the dollar store.
Yes you are correct. I just happened to have some already.
wrap tie around rope twice before pulling tight will hold more without slipping
That’s a good idea. I may make another video with viewer suggestions. Thanks a bunch.
That's a cool trap, but it wouldn't be legal in Washington State, but with Rot Cord instead of the bread tie, it would be legal.. That's for sharing this trap.
Your right about that. I know for a crab trap in Cali you have to have something like that but it doesn’t say for crawfish.
Wait... Fire hot????
No, it’s cold lol.
That’s essentially 3/4 mesh right? Insanely retarded regulations here in AR.....we can only have a 2” opening.
So sorry for the late response. I’m not sure on the measurements but you can always measure it at the store you get them from. The hole at the end is still pretty small. Nice part is you can customize it so that it fits regulations.
How about using some wire mesh from your local hardware store instead of all the chinese made plastic junk from the dollar store. Ya I get it, things are expensive. BUTT, if you just have a little patience and support your local stores and buy USA made materials, things will get better and cheaper in the future. Crayfish don't give a shit what your trap is made from, but you should.
These wire baskets are not plastic. They are wire baskets coated in a black plastic type paint. It’s not a matter of things being expensive either. It’s just a matter that you could make something on the cheap if you wanted to.