Ahh thanks for that JIm, glad its helping people! Super appreciate the feedback mate. All the best with your Modding! if you have any questions dont hesitate to get in touch ok....good luck! 🙏
Fitting mine this Saturday, so thanks for the upload... I appreciate your efforts in creating/editing these videos for the benefit of others. Keep it up.
Please use bearings comes with monorim. I used the original bearings as you told and it became wobbly. Then I put the one comes with monorim and its stable now.
Hello! I have the monorim V4 Front suspension with everything stock, every since I mounted it I have a clanking noise in the part you have in hand at 8:08 ,can I fix it?
The Xiaomi M365 Pro has a water resistance IP rating of IP54, meaning that it can tolerate water splashes. nothing i have done in this video changes that :) Thanks for dropping a line Lomar. all the best 🙏
Hiya mate I think it's a great idea that you can buy suspension also that you have a choice between different springs I'd definitely need it as I'm sixteen stone lol plus your videos are really helpful I would never of known how to change to suspension so bang on mate good stuff..
I think the Blue Spring in this kit would be good for 16st....I didnt really need blue...im so skinny i could have stuck with yellow....the girls spring 🤣🤣
How did you get the steering fixture part to lock in at 7:37. For me it doesn't stay i've tried for hours but it doesnt lock in place. Anyways thanks for the video :)
ive watched the timestamped section you quoted but cant really think of a good answer to give. I didnt cut anything out of the video i just did what you can see in the video. unfortunately i dont have a simple solution i can only recommend you keep trying until you get it right. Sorry i cant be of more use :(
I have question 10:14 how tight it has to be, in my case when I tighten the screw it is hard to turn, my screw is fairly loose. do you have any play up and down?
are you talking about the Screw that runs in the centre column pointing down? if so make sure you use the New screw that comes in the packet NOT the original one.
@Sherwin yes I have fixed the issue maybe I was not watching the instructions particulary carefully because in my case the whole thing was to tight, Ive bought the aditional stem support and bottom part extension with that I got extra screw that was way longer. Which after install worked like charm.
yeah it does the Pro 2 mate....just search 'Monorim V2 suspension kit Xiaomi" you should find it on Amazon....(Not sure if my link in descrition is good for Dublin?) cheers Richard 👍
you would have to e-mail monorim and ask because im not 100%. I just had a little look and if you ask me the Aovo 365 pro looks the exact same as the Xioami m365 pro so i wouldnt see any reason why it wouldnt fit. but better to be safe than sorry right? Good luck with it maxone 🤞🤞🤞
Hi Mate, I have installed the suspension, but the wheel rattles, what should I do? It rattles at the part on 07:45 . About 2 mm, but it is bothering me. Is there is a solution?
Do you think this suspension fit to the scooter hiboy s2 pro could check for me or can you do a video like that but putting that suspension to the hiboy s2 pro and like that thank you.....
i get asked this a lot....I always recommend just emailing Monorim themselves, they will be able to tell you. Im not sure. sorry i cant be of more help. good luck
I dont have the scooter anymore mate. I always give scooters away to subs once ive finished filming with them. If id kept it then i deffo would have. It just looks so much cooler! :)
i searched up on the monorim website for a suspension but i cant find a uspension that is my brand (navee v 40i pro) i see that my scooter looks quite alike to the m 365 fork should i buy an m 365 suspension?
AHH the actual spring...I thought the bearings you asking about at first sorry....I don't have anything (yet) was fine for a few weeks but yes it squeaks now. I have some WD40 silicone lubricant that I'm going to try out. 🤞
Nice video, going to buy this when it comes back in stock in the UK. Is there anything I should note before I buy? I'm confident i'll be able to fit it. I'm asking in regards to the functionality. Thanks in advance!
So far so good, im really impressed with it and i think i looks cool. No regrets. Shame its out of stock again, but i guess it says a lot about the popularity of it. I waited a couple of weeks also for it to come back in stock. put my name on the waiting list and when Amazon emailed me got it straight away. people been recommending it to me for ages wish i got it sooner. thanks for the feedback A B Good luck with it ✌
@@SlammDunkProductions managed to order one, there was one left on mybestscooter and it should be coming on Tuesday. Will be using your video when fitting. Thanks again!
SlammDunk Productions received and fitted it today. Made such a huge difference, I’m very very pleased with it. Did quite a long journey just now and my legs/knees feel much better after riding. For anybody else looking to purchase one; 1) you NEED tools. You will not get the bolt of the front wheels unless you are Thanos. 2) remember how the bearing came off the steering column. 3) the smallest Alan key for the screws behind the plastic cover/stickers is rubbish. When screwing it back into the suspension kit, you’ll need a screwdriver with that but to get it flush. 4) Be careful when removing the reflective stickers as you’ll be putting them back on. 5) the blue spring is probably better, I could squeeze the yellow spring with my hand slightly. 6) again, be prepared to take some time figuring those front wheel bolts out. That probably took up most of my time (the whole process took me 3/4 hours, I have some DIY experience. I would imagine it would take much longer for something with very little experience). Thanks again for the video, wouldn’t have bought it without the help of the video to be honest. The manufacturers should sponsor you 😂
@@AamirBadat "You will not get the bolt of the front wheels unless you are Thanos." 🤣🤣 yeah i deffo agree with that!....I Maybe reach out to monorim and be like "i will do a follow up video on the suspension if you spponsor me" ...see if they bite 🤣 really appreciate that last comment, everything you say is spot on. 👍👍👍
A locking wrench i think... I nipped out to my local Wilkinsons and just grabbed what i thought would work: www.wilko.com/en-uk/wilko-wrench-locking-7-inch/p/0343427 ✌
@@SlammDunkProductions Yes, you can put it back and I highly recommend putting it back (at least on Monorim V3). That screw blocks the pole base in case it over rotates just by accident/failure.
Good video mate, do you have any idea on how to stop the scooter creaking ? Had it 2 weeks and can hear the creaks even with AirPods in, sounds disgusting
You need the Little Vibration damper in the Stem probaby mate....If you look at my last video: ruclips.net/video/Eks04G9NmXA/видео.html skip to: 7mins55. and i talk about it there....they are really cheap and will solve your creaking noise like magic...i promise! Link for the product on Amazon is in that video description. hope it helps pal? good luck. thanks! 🙏
SlammDunk Productions brilliant cheers mate I’ll definitely give that a try 🤙🏼 tried stuffing a plastic bag in there and cutting the excess but it’s no use , dampeners seem like the way forward 👌🏼 best pro vids on RUclips geeze keep it up
@@thejackster10100 Yeah its amazing what a thin piece of 3D printed plastic can do...I dont fancy the other method of lubing it up regluarly with WD-40 that cant be very kind on the metalwork and a bit sloppy 😂....just bear in mind with the Damper/Dampener whatever...to start with the thinnest one first...0.4 is probably enough if its a new scoot, but if roblem is worse might need 0.6, very unliekly you will ever need higher than that. If you cant close the latch it just unscrew the central forward facing bolt very slightly until the latch can close with the damper in for a nice tight lock. You will be so surprised...cant live without it, that creaking noise is the worst! Sound like a 10 year old beat scooter not new lol.
that a good price mod I’m going to order my scooter the pro 2 and I think I’ll order the suspension at the same time and do it all before I take it out, love the videos mate
SlammDunk Productions thanks mate again and I’m glad I found your videos I kept not knowing what scooter to get but I love the look of the xiaomi I’m glad I chose that one, I’m thinking of doing the 10” tyre upgrade too what do you think? Have you thought about doing it yourself
@@supermotoskippy5914 Yeah for the price of these compared to other high end scooters you cant go wrong. As long as you are not looking to go off-roading and trail riding you dont need the suspension, but ofcourse it helps. I really only went for the Monorim suspension just because i thought it looked nice but it does make a noticable difference. I dont think you can fit suspension AND have 10" tyres so it would be up to you what your prefer. I have another Xiaomi video coming out soon (maybe a week or 2 yet) but i have another Top 10 accessories i want to show and some mods ive done since the video are really nice. hopefully you will chck it out :) but yeah Xiaomis are SUPERB value for money in my opinion, the build quality is 👍👍👍 been riding mine pretty hard for over a year now, no complaints, no issues.....and no flat tyres yet (thank god!)
SlammDunk Productions perfect thanks mate I’ll just do the suspension then as tbh I like it more because it looks cool lol, but as you know here in the UK we have a lot of pot holes 😂 so the suspension will help and be a look cool mod for sure
@@SlammDunkProductions I did watch the video thing is I just got my scooter back from a shop and they fitted the mud guard to the actual bottom bit of the suspension. Not only that when I took it back because the mud guard was moving up and down and scraping against the wheel.. they said it's gotta come off and they removed it.. in your video it looks as though you bolted the mud guard to the bottom of the frame which looks like the way it should be... man.. the shop have been charging me money every time I've taken it back .. I'm going to flip out man I swear, I left em a review about the poor work they carried out and they are saying it the warranty doesn't cover wear and tear.. WTF .. Man.. I'm super pissed off.. They've taken me for an idiot and my scooter isn't right 🙁
@@MeTaMaNvR its hard for me to remember. i didnt own the scooter for long after making this video. I was fine putting the mudguard on, i think only if you use 10" tires the mudguard needs to be left off. 👍
@@SlammDunkProductions Hey man thanks .. You did the install correctly. I took it apart today myself followed your video and the the suspension is properly done with the mud guard fitted to under the frame where it's supposed to go.. Tomorrow I go to the store and get my money back.. they are clearly cowboys!! Thanks man for the top video!!
Nice tutorial, but for my scooter the screw without the cable doesnt loosen at all. I´ve tried diffrent tools but they all dont work. What is the tool called you used? Would be nice to know!
Hi great video thanks and I will be getting one for my scooter but I did want to know why you put the more heaven duty spring in? What’s the real difference. I’m not going to to jumps or anything on it cos I’m getting a bit old for that and got it cos i cant walk long distance so the suspension would help with my back issues. Just not sure which spring to install for myself.
If i remember correctly it was the reviews i had read previous to buying the kit. I had read a couple others say that the heavy duty spring was much better for adults. That the yellow spring was too soft and to save yourself time and effort by just using the Blue spring from the start. Maybe im too trusting of others but i followed the advice and i dont have any regrets. I never actually rode with the yellow spring at all but it made sense to me to just use the more heavy duty to begin with. Just like you i have no intentions to do jump or bounces so i dont want the springyness, but there may be little difference for a guy like me who only weighs 11 stone?
@@SlammDunkProductions yeah I have seen a lot of reviews as well and every one is saying change to heaven duty straight up and I don’t want to be spending heaps of time changing it when it cuts into my riding time hehehe. I ordered mine today and I’m so excited but it seams it will take weeks to come in cos I’m in Australia. I also ordered the rear suspension as well this really is my only toy so I might as well go all in. I live in a small country town and everyone loves to check it out. I also take it traveling cos you just never know when it comes in handy, like those long romantic walks with the partner and I can just zoom off do a couple of laps of the park and double back hehehe. Love your reviews you have given me heaps of great tips and I’ve implemented a lot for my scooter, keep it up
@@peekaboo5207 AHH the rear suspension looks cool!...I would have got it myself if not for giving the scoot away recently to a subscriber. Sounds like you get a lot out of your scooter and make the most if it which I love to hear....damn they ain't even legal here yet but thankfully where I live the police couldn't care less. 😊
I would think that it "Might" fit the Aovo Pro....very similar scooter build. However just to be safe i would reach out to monorim themselves. Just drop them an email and i am sure they will get back to you 👍
If I remember correctly. I chose to use the top bearings because they were already covered in grease. I was able to use some of the excess grease and apply it to the new lower bearings. Also my original lower bearings were a bit damaged. I'm sure there were one or 2 bearings missing from the original. Cheers Heanly 👍♥️
Great video beo keep it up im tryna be like you soon its not easy for me where i live so im tryna build up my channel aswell you are defo one of the people i look up to❤❤❤
Aww thats really nice of you to say that ☺️ even im finding it difficult getting back into the groove since covid/lockdown. Ive fallen way behind on things....so where are you from?...i will stop by your channel now and offer a little support ok. Just keep patient, keep putting out vids. It might be slow at first but it just takes one good video to get you rolling! Good luck ❤️❤️❤️🙏
@@SlammDunkProductions thanks im from uk south but its just not easy like way people are and how its a real struggle to be sucssesful from where i am im tryna be diffrent look after my mum and do things the right way for money but thanks anyway any support u show it will be taken to heart and i wont forget what u done.❤
@@skspecialist3781 I know man i feel you pain i really do...Life is a propel gruel for most of us these days for one reason or another. I dont have much in life but i have a wife who loves me, a child on the way, everyone is healthy and we have a roof over our heads (and internet 😁) So i Know im one of the lucky ones. It crazy what this Covid carry-on has done to eveyone. Businesses are closed down, economy screwed, people not able to pay rent, many getting evicted. Country is a mess and things shouldnt be this way. It all BS and i wish you the sincerest thank you for your support and Positivity despite having a hard time right now. Wish i was able to help you more my friend. Thanks again, catch you soon i hope 🙏 all the best E-scooter specialist ❤
Muy buenas SlammDunk Productions , que bien funciona esa suspensión, sabes si se la podría montar a mi Hiboy S2 PRO ? , sino, me podrias indicar por favor el diámetro exterior del tubo de la suspensión que se inserta dentro del chasis ? Y la distancia interior de la horquilla donde se mete el eje de la rueda ? Gracias de antemano
Lo siento, ya no tengo el Scooter. Le regalé el scooter a un suscriptor. He escuchado a otros hacer la misma pregunta. Lo que sugiero es enviar un correo electrónico a monorim. Ellos podrán responder a su pregunta o recomendar una solución. Lo siento, mi español no es muy bueno. ¡gracias! 👍
I use my scooter on a Daily basis....Monorim is easily the standard for Suspension and hand on my heart ive had zero issues. You have either done something wrong or you are using suspension not made for your model scooter. I cant imagine it being a manufacturer fault.....I mean "the forks shake and are loose"?? is that what your saying? Just sounds like you did a bad job putting them on maybe. If you could take a photo of your finished build maybe i can help?
SlammDunk Productions yeah i already get my refund and order again if you see the monorim its look like old and to many scratches on the red area. i mean your monorim has zero scratch?
@@jesusisoursavior2682 Honestly my monorim arrived how you would expect it to....boxed as new, all wroapped up well not a spot on it....Sometime with amazon if people return items they end up getting forwarded onto the next customer.....Maybe someone had it before you and had a hard time trying to fit it, got his refund and it got sent to you? Who knows, its no good like is it :( My M365 pro is unlocked to go 32kph/25mph ✌
Sorry bro but its actually something i am curious about myself...its the next obvious upgrade but i dont think it can be done. Im looking for a way how to do it so if you find please let me know 🙏
i would not be able to help without a lot more information than "feels wobbly". i feel that without something visual i probably cant help at all. It could be anything... sorry :( there will be other tutorials out there if you search for them. Mine is more of a timelapse than a full guide.
I like that you told about the stubborn screw, not like in other vids where everything goes perfect
Haha yeah this build took 3 hours... 1 hour was just that bolt! 😕 Got there eventually 🙂👍 thanks mate ✌️
Just fitted mine, thanks to u! 3 hours of frustration but it worked😂 Thanks for the help bro
Haha yeah 3 hours sounds about right 😆 well done mate 👍👍👍❤️
this video is so perfect gets straight to the point no lies no messing around liked and subscribed u bro 👍
Great video, just ordered for my 1s, front and back, will use your video as an tutorial! Thanks again and much love from Germany!
Thanks mate! ✌️♥️
Wow, that suspension makes a huge difference! Thanks!
Glad you like it 👍👍👍
Nice video bro right level of detail respect
cool, exactly the video explanation I needed to start modifying my m365 pro, thank you for posting :)
Ahh thanks for that JIm, glad its helping people! Super appreciate the feedback mate. All the best with your Modding! if you have any questions dont hesitate to get in touch ok....good luck! 🙏
U feel every bump on them due to get one for my scooter
Can't wait to get my pro suspension too!!! I love the background music so reggae
Nice!... You won't regret it. Happy you approve of the reggae 😊 thanks Vivica 👍❤️
Fitting mine this Saturday, so thanks for the upload... I appreciate your efforts in creating/editing these videos for the benefit of others. Keep it up.
ahh no problem at all..I appreciate you dropping a line ACF Heart hope it goes smoothly for ya! 🤞🤞🤞
Yooo can you update?
Nice mod mate, I’m deffo getting mine done too😀😀. Thanks for the video bud, makes it easier for the rest of us 🤩🤩
Nice one Simba! 👍 happy to help mate. Good luck with them when you get them i think they are great you will too :) ✌
Please use bearings comes with monorim. I used the original bearings as you told and it became wobbly. Then I put the one comes with monorim and its stable now.
Hi, do you think it needs a rear suspension, or the front is enough ?
Great man many thanks good idea and good video 🙋♂️
Thanks so much mate. All the best to you ❤
Hello! I have the monorim V4 Front suspension with everything stock, every since I mounted it I have a clanking noise in the part you have in hand at 8:08 ,can I fix it?
Sorry I'm not familiar with v4 but to be honest it would be hard to tell without having a look at it. Honestly I'm no expert sorry 😔
Good video! But may I ask, does this render the scooter non- water resistant? Since you somewhat tinkered the insides of the wheel.
The Xiaomi M365 Pro has a water resistance IP rating of IP54, meaning that it can tolerate water splashes. nothing i have done in this video changes that :) Thanks for dropping a line Lomar. all the best 🙏
Tinkered 😂
Use this guide - www.coolstuffshub.com/ip-rating-guide/
Na because he didn't open the wheel or anything containing exposed wire and the only wire for the wheel he messed with is covered
I wonder the suspension kit work on aovo pro es80.
is the stock has suspension?
Hiya mate I think it's a great idea that you can buy suspension also that you have a choice between different springs I'd definitely need it as I'm sixteen stone lol plus your videos are really helpful I would never of known how to change to suspension so bang on mate good stuff..
I think the Blue Spring in this kit would be good for 16st....I didnt really need blue...im so skinny i could have stuck with yellow....the girls spring 🤣🤣
How did you get the steering fixture part to lock in at 7:37. For me it doesn't stay i've tried for hours but it doesnt lock in place. Anyways thanks for the video :)
ive watched the timestamped section you quoted but cant really think of a good answer to give. I didnt cut anything out of the video i just did what you can see in the video. unfortunately i dont have a simple solution i can only recommend you keep trying until you get it right. Sorry i cant be of more use :(
@@SlammDunkProductions No worries, i got it somehow to work 🙂
is it the bolt inside the stem to loosen if the steering becomes too tight to turn?
No not the inside screw...should be one of the collars that need undone a bit?....it's been a while since I had this scooter I'm not 100%
The travel on that suspension looks great
Its not bad like! 😁
How is it going now are experiencing play on the handle bar when you step on deck and then push and back fowawrd the handle bar?
hmmm honestly no everything is ok at the moment. pretty tight allround...well my breaks need seeing to but thats a dif story.
Lmao Got an ad for monorim suspension while watching this🤣
haha...nice 😂
I have question 10:14 how tight it has to be, in my case when I tighten the screw it is hard to turn, my screw is fairly loose. do you have any play up and down?
are you talking about the Screw that runs in the centre column pointing down? if so make sure you use the New screw that comes in the packet NOT the original one.
@@SlammDunkProductions I did the original is too short
@@MrRivii the original should be too long...not too short
@Sherwin yes I have fixed the issue maybe I was not watching the instructions particulary carefully because in my case the whole thing was to tight, Ive bought the aditional stem support and bottom part extension with that I got extra screw that was way longer. Which after install worked like charm.
Hi mate i have problems with the bolt on 8:20. It doesnt fit
Are you using an Original M365 pro scooter or another model?
Nice video bro. Top work. Looks lit 🔥
Cheers mate 🙏♥️
Good Job, the Video is very helpfull keep up good work.
Thank you! ♥
Hey im wondering if i can put this on aovo pro scooter please? Tia
Do that set up works for the levy???
They have different version for different scooters. You would have to get the right one i think. good luck
Is that fit to xiaomi pro 2? Where can i buy this around Dublin?
yeah it does the Pro 2 mate....just search 'Monorim V2 suspension kit Xiaomi" you should find it on Amazon....(Not sure if my link in descrition is good for Dublin?) cheers Richard 👍
my man is a pro youtuber now :D
lol still a long way from that! but thanks! 😊
Is it fit for mi scooter pro 2?
HI was wondering after installating, does your handle bar wobble? Mine after installing when i move the handle it wobble.
i don't recall any wobble no. must be something loose somehwere. Or maybe worth trying those rubber dampers you can get on amazon?
Mine too
Hi do you know if this suspension kit will fit aovo 365 Pro
you would have to e-mail monorim and ask because im not 100%. I just had a little look and if you ask me the Aovo 365 pro looks the exact same as the Xioami m365 pro so i wouldnt see any reason why it wouldnt fit. but better to be safe than sorry right? Good luck with it maxone 🤞🤞🤞
sorry about the delay there getting back to you, only just came accross the message today i must have missed it. 😐
Does it give more ground clearence?
No not really.
Hi Mate,
I have installed the suspension, but the wheel rattles, what should I do? It rattles at the part on 07:45 . About 2 mm, but it is bothering me. Is there is a solution?
The wheel is shaking more than with the original parts.
@@Ahmedcito1not sure mate, maybe you just havnt pushed everything tight enough together?...its hard to tell without being abke to see it. 🙁
Does it fit the pro 2
i would imagine so but i would check with Monorim direct to make sure....if not then im pretty sure Monorim sell a version for the pro 2 👍
Love the Song,.."I FeeL GooD" Got PlayList Bro..? Nice work with Youre Amazing Step Man..!
Sorry man, i just choose songs i like from Epidemixc Sounds. Glad you like it though. take it easy. peace
Do you think this suspension fit to the scooter hiboy s2 pro could check for me or can you do a video like that but putting that suspension to the hiboy s2 pro and like that thank you.....
i get asked this a lot....I always recommend just emailing Monorim themselves, they will be able to tell you. Im not sure. sorry i cant be of more help. good luck
@@SlammDunkProductions okay thank you
Can we do this on xiaomi 4 lite?
It is normal when you use that suspension it is still moving and shaking?
Great vid just got my PRO 2 today! Will you be fitting rear suspension in the future?
I dont have the scooter anymore mate. I always give scooters away to subs once ive finished filming with them. If id kept it then i deffo would have. It just looks so much cooler! :)
Thanks
You are most welcome mehmet! 👍 Thanks for dropping a line 🙏❤
Amazon doesnt have them any more :( any issues with the suspension bottoming out and hitting the tire in motion?
amzn.to/2ZfncQn
@@SlammDunkProductions i forgot to tell you am in the us, if i order thru the uk amazo. Will they ship it too me?
i searched up on the monorim website for a suspension but i cant find a uspension that is my brand (navee v 40i pro) i see that my scooter looks quite alike to the m 365 fork should i buy an m 365 suspension?
does it works to on the Xiaomi S1 scooter and what the suspension Monorim can give you better ride or so ? wil like to buy this tool I think ....😊
nice job dude !
Thanks for dropping a line mate, i appreciate that :)
Is this compatible with airless tires?
I can't think why not.
where this suspension make from ? Thanks
Monorim 👍
Well you made that look easy !!!
😆
bro what oil you used in you srping
AHH the actual spring...I thought the bearings you asking about at first sorry....I don't have anything (yet) was fine for a few weeks but yes it squeaks now. I have some WD40 silicone lubricant that I'm going to try out. 🤞
Nice video, going to buy this when it comes back in stock in the UK. Is there anything I should note before I buy? I'm confident i'll be able to fit it. I'm asking in regards to the functionality. Thanks in advance!
So far so good, im really impressed with it and i think i looks cool. No regrets. Shame its out of stock again, but i guess it says a lot about the popularity of it. I waited a couple of weeks also for it to come back in stock. put my name on the waiting list and when Amazon emailed me got it straight away. people been recommending it to me for ages wish i got it sooner. thanks for the feedback A B Good luck with it ✌
@@SlammDunkProductions managed to order one, there was one left on mybestscooter and it should be coming on Tuesday. Will be using your video when fitting. Thanks again!
@@AamirBadat ahh magic..well done. You wont regret it. 🙂👍 Thanks mate. 🙏❤️
SlammDunk Productions received and fitted it today. Made such a huge difference, I’m very very pleased with it. Did quite a long journey just now and my legs/knees feel much better after riding. For anybody else looking to purchase one; 1) you NEED tools. You will not get the bolt of the front wheels unless you are Thanos. 2) remember how the bearing came off the steering column. 3) the smallest Alan key for the screws behind the plastic cover/stickers is rubbish. When screwing it back into the suspension kit, you’ll need a screwdriver with that but to get it flush. 4) Be careful when removing the reflective stickers as you’ll be putting them back on. 5) the blue spring is probably better, I could squeeze the yellow spring with my hand slightly. 6) again, be prepared to take some time figuring those front wheel bolts out. That probably took up most of my time (the whole process took me 3/4 hours, I have some DIY experience. I would imagine it would take much longer for something with very little experience). Thanks again for the video, wouldn’t have bought it without the help of the video to be honest. The manufacturers should sponsor you 😂
@@AamirBadat "You will not get the bolt of the front wheels unless you are Thanos." 🤣🤣 yeah i deffo agree with that!....I Maybe reach out to monorim and be like "i will do a follow up video on the suspension if you spponsor me" ...see if they bite 🤣 really appreciate that last comment, everything you say is spot on. 👍👍👍
Great Job! Thanks for the video
Thanks Kidult 🙏♥️
Does fender touches rubber when you jump like that on scotter, or in a ride?
No not at all. (I can jump really hard on the scooter and the fender will still not touch rubber) 👍👍
does it fit to Xiaomi electric scooter 3??
Does it work with 10" tires?
I do not know as i gave away the scooter shortly after this video :/ Sorry
Does this fit a Hiboy KS4 pro? I just bought one and I might need this.
check the Monorim website they may have a version for you 🤞
What's the name of the tool you used to get the bolt off?
A locking wrench i think... I nipped out to my local Wilkinsons and just grabbed what i thought would work: www.wilko.com/en-uk/wilko-wrench-locking-7-inch/p/0343427 ✌
@@SlammDunkProductions cheers, appreciate it.
@@douglasj9685 no worries pal. All the best 😊
Does this work for the iScooter E9 pro aswell
No sorry.
Does this also work with the hover 1 alpha?
No idea, but I'm doubtful.
can you use the same model for the xiaomi M365 pro 2 ?
Yes you can 👍👍😘
@@SlammDunkProductions thx brother 🙂
@@Ahmedmohamed-cb8wj No problem my man! 🙂
Very good video! I see you use something to stop the stem from squeaking - link?
Oh cool I get to plug one of my own videos... ruclips.net/video/U2ThNvN16SA/видео.html you will see 👍✌️
@@SlammDunkProductions Thank you! :)
does this work also with the pro 2 ?
No mate sorry, but try XiaoFlasher. 👍
@@SlammDunkProductions will give it a look thx ;)
@@nickadm8321 no problem nick. please come back and let me know if it works alright for you. ive heard it recommended from others. good luck with it 🤞
Hi mate, I noticed you never put the screw you took off at 5:05 back, was this not needed? Cheers (studying your video to do my mod soon)
sorry for late reply! yes that is correct. Its not possible to put this screw back (not required) 👍
@@SlammDunkProductions Yes, you can put it back and I highly recommend putting it back (at least on Monorim V3). That screw blocks the pole base in case it over rotates just by accident/failure.
i just installed suspension. is it suppose to be now a little harder to control scooter, and turn left or right?
Hmmm no not at all, should feel the same with steering!...maybe you have overtightened something? 🤔
Hi, I have a aovo Pro looks identical to the xiaomi, will this mod work for it too?
maybe, but you would be best asking monorim themselves, they will confirm :) 👍
@@SlammDunkProductions thanks mate, will do.
Good video mate, do you have any idea on how to stop the scooter creaking ? Had it 2 weeks and can hear the creaks even with AirPods in, sounds disgusting
You need the Little Vibration damper in the Stem probaby mate....If you look at my last video: ruclips.net/video/Eks04G9NmXA/видео.html skip to: 7mins55. and i talk about it there....they are really cheap and will solve your creaking noise like magic...i promise! Link for the product on Amazon is in that video description. hope it helps pal? good luck. thanks! 🙏
SlammDunk Productions brilliant cheers mate I’ll definitely give that a try 🤙🏼 tried stuffing a plastic bag in there and cutting the excess but it’s no use , dampeners seem like the way forward 👌🏼 best pro vids on RUclips geeze keep it up
@@thejackster10100 Yeah its amazing what a thin piece of 3D printed plastic can do...I dont fancy the other method of lubing it up regluarly with WD-40 that cant be very kind on the metalwork and a bit sloppy 😂....just bear in mind with the Damper/Dampener whatever...to start with the thinnest one first...0.4 is probably enough if its a new scoot, but if roblem is worse might need 0.6, very unliekly you will ever need higher than that. If you cant close the latch it just unscrew the central forward facing bolt very slightly until the latch can close with the damper in for a nice tight lock. You will be so surprised...cant live without it, that creaking noise is the worst! Sound like a 10 year old beat scooter not new lol.
that a good price mod I’m going to order my scooter the pro 2 and I think I’ll order the suspension at the same time and do it all before I take it out, love the videos mate
yup its a decent piece of kit, The Pro 2 and the Monorim stuff. you wont regret it! 👍 Cheers for the feedback Skippy, much appreciated 🙏❤
SlammDunk Productions thanks mate again and I’m glad I found your videos I kept not knowing what scooter to get but I love the look of the xiaomi I’m glad I chose that one, I’m thinking of doing the 10” tyre upgrade too what do you think? Have you thought about doing it yourself
@@supermotoskippy5914 Yeah for the price of these compared to other high end scooters you cant go wrong. As long as you are not looking to go off-roading and trail riding you dont need the suspension, but ofcourse it helps. I really only went for the Monorim suspension just because i thought it looked nice but it does make a noticable difference. I dont think you can fit suspension AND have 10" tyres so it would be up to you what your prefer. I have another Xiaomi video coming out soon (maybe a week or 2 yet) but i have another Top 10 accessories i want to show and some mods ive done since the video are really nice. hopefully you will chck it out :) but yeah Xiaomis are SUPERB value for money in my opinion, the build quality is 👍👍👍 been riding mine pretty hard for over a year now, no complaints, no issues.....and no flat tyres yet (thank god!)
SlammDunk Productions perfect thanks mate I’ll just do the suspension then as tbh I like it more because it looks cool lol, but as you know here in the UK we have a lot of pot holes 😂 so the suspension will help and be a look cool mod for sure
Hey mate, can I use this video for the Pro 2 ? does the steps are same ?
i am not 100% sure but i would imagine so yes. 👍
Will this fit the Hiboy S2 Pro?
Not sure mate, but if you email Monorim themselves I'm sure they would be happy to tell you or point you in the right direction 👍
hey I just ordered an AovoPro Scooter which is practically a replica I was wondering if you think I could add this mod to it
Yes it will fit to any Xiaomi Clones 👍
How's the AOVO Pro going? Is it any good? Just ordered one and hope I made a good choice...
What size spanner would i need?
there is a spanner that comes with the kit, but i eneded up buyiong my own Claw, grippy thingy one :)
Can you get the suspension for ninebot f30
www.amazon.co.uk/Monorim-V3-Suspension-Upgrade-Ninebot/dp/B089SYR5K1?th=1
@@SlammDunkProductions thank you this will make my scooter way better thanks
Does it fit the Xiaomi Pro 2 as well?
Not 100% sure to be honest, but I'm sure if you were to email Monorim direct they would reply and let you know. 👍
wow this is so cool it tone out to be now scuter
Does the mud guard need to come off ?
Did you watch the video? 🤔
@@SlammDunkProductions I did watch the video thing is I just got my scooter back from a shop and they fitted the mud guard to the actual bottom bit of the suspension. Not only that when I took it back because the mud guard was moving up and down and scraping against the wheel.. they said it's gotta come off and they removed it.. in your video it looks as though you bolted the mud guard to the bottom of the frame which looks like the way it should be... man.. the shop have been charging me money every time I've taken it back .. I'm going to flip out man I swear, I left em a review about the poor work they carried out and they are saying it the warranty doesn't cover wear and tear.. WTF .. Man.. I'm super pissed off.. They've taken me for an idiot and my scooter isn't right 🙁
@@MeTaMaNvR its hard for me to remember. i didnt own the scooter for long after making this video. I was fine putting the mudguard on, i think only if you use 10" tires the mudguard needs to be left off. 👍
@@SlammDunkProductions Hey man thanks .. You did the install correctly. I took it apart today myself followed your video and the the suspension is properly done with the mud guard fitted to under the frame where it's supposed to go.. Tomorrow I go to the store and get my money back.. they are clearly cowboys!! Thanks man for the top video!!
@@MeTaMaNvR appreciate that mate. All the best 🙏
Nice tutorial, but for my scooter the screw without the cable doesnt loosen at all. I´ve tried diffrent tools but they all dont work. What is the tool called you used? Would be nice to know!
Grip wrench 👍
I cant remove the steering axle from the chamber like you did. It doesnt slide out like yours. Do you know what i can do? Brute force hammer it?
I would recommend brute force hammering anything 😬 but is it deffo an 'official' Xiaomi M365?...as apposed to a copy/clone version?
Hi great video thanks and I will be getting one for my scooter but I did want to know why you put the more heaven duty spring in? What’s the real difference. I’m not going to to jumps or anything on it cos I’m getting a bit old for that and got it cos i cant walk long distance so the suspension would help with my back issues. Just not sure which spring to install for myself.
If i remember correctly it was the reviews i had read previous to buying the kit. I had read a couple others say that the heavy duty spring was much better for adults. That the yellow spring was too soft and to save yourself time and effort by just using the Blue spring from the start. Maybe im too trusting of others but i followed the advice and i dont have any regrets. I never actually rode with the yellow spring at all but it made sense to me to just use the more heavy duty to begin with. Just like you i have no intentions to do jump or bounces so i dont want the springyness, but there may be little difference for a guy like me who only weighs 11 stone?
@@SlammDunkProductions yeah I have seen a lot of reviews as well and every one is saying change to heaven duty straight up and I don’t want to be spending heaps of time changing it when it cuts into my riding time hehehe. I ordered mine today and I’m so excited but it seams it will take weeks to come in cos I’m in Australia. I also ordered the rear suspension as well this really is my only toy so I might as well go all in. I live in a small country town and everyone loves to check it out. I also take it traveling cos you just never know when it comes in handy, like those long romantic walks with the partner and I can just zoom off do a couple of laps of the park and double back hehehe. Love your reviews you have given me heaps of great tips and I’ve implemented a lot for my scooter, keep it up
@@peekaboo5207 AHH the rear suspension looks cool!...I would have got it myself if not for giving the scoot away recently to a subscriber. Sounds like you get a lot out of your scooter and make the most if it which I love to hear....damn they ain't even legal here yet but thankfully where I live the police couldn't care less. 😊
can this be done in xiaomi pro 2 as well?
No, sorry. :(
Brilliant video 😎
Will it fit Aovo pro 😀
I'm crap at this stuff
I'll break something 🤣
I would think that it "Might" fit the Aovo Pro....very similar scooter build. However just to be safe i would reach out to monorim themselves. Just drop them an email and i am sure they will get back to you 👍
is your deck a little bit inclined ( can be eventually fixed with rear 10 inches wheel)???
Yeah 10" would be good 👍♥️
why didnt you reuse the bearings for the bottom part? were they already in bad condition as oppose to the one on the top?
If I remember correctly. I chose to use the top bearings because they were already covered in grease. I was able to use some of the excess grease and apply it to the new lower bearings. Also my original lower bearings were a bit damaged. I'm sure there were one or 2 bearings missing from the original. Cheers Heanly 👍♥️
@@SlammDunkProductions thanks mate
@@heanlygaming5408 no problem Heanly 🙏
Great video beo keep it up im tryna be like you soon its not easy for me where i live so im tryna build up my channel aswell you are defo one of the people i look up to❤❤❤
Aww thats really nice of you to say that ☺️ even im finding it difficult getting back into the groove since covid/lockdown. Ive fallen way behind on things....so where are you from?...i will stop by your channel now and offer a little support ok. Just keep patient, keep putting out vids. It might be slow at first but it just takes one good video to get you rolling! Good luck ❤️❤️❤️🙏
@@SlammDunkProductions thanks im from uk south but its just not easy like way people are and how its a real struggle to be sucssesful from where i am im tryna be diffrent look after my mum and do things the right way for money but thanks anyway any support u show it will be taken to heart and i wont forget what u done.❤
@@skspecialist3781 I know man i feel you pain i really do...Life is a propel gruel for most of us these days for one reason or another. I dont have much in life but i have a wife who loves me, a child on the way, everyone is healthy and we have a roof over our heads (and internet 😁) So i Know im one of the lucky ones. It crazy what this Covid carry-on has done to eveyone. Businesses are closed down, economy screwed, people not able to pay rent, many getting evicted. Country is a mess and things shouldnt be this way. It all BS and i wish you the sincerest thank you for your support and Positivity despite having a hard time right now. Wish i was able to help you more my friend. Thanks again, catch you soon i hope 🙏 all the best E-scooter specialist ❤
This is the same way to instal for the xiaomi pro 4 ?
I personally do not know the answer to that, sorry.
Muy buenas SlammDunk Productions , que bien funciona esa suspensión, sabes si se la podría montar a mi Hiboy S2 PRO ? , sino, me podrias indicar por favor el diámetro exterior del tubo de la suspensión que se inserta dentro del chasis ? Y la distancia interior de la horquilla donde se mete el eje de la rueda ? Gracias de antemano
Lo siento, ya no tengo el Scooter. Le regalé el scooter a un suscriptor. He escuchado a otros hacer la misma pregunta. Lo que sugiero es enviar un correo electrónico a monorim. Ellos podrán responder a su pregunta o recomendar una solución. Lo siento, mi español no es muy bueno. ¡gracias! 👍
Is this also available for xiaomi 3 to?
Monorim have a version for Xiaomi 3 im sure! check amazon or monorim website 👍
Hi after install complete test found issue fork shake loose swap to original ring is better, but not solved are you have same issue ?
I use my scooter on a Daily basis....Monorim is easily the standard for Suspension and hand on my heart ive had zero issues. You have either done something wrong or you are using suspension not made for your model scooter. I cant imagine it being a manufacturer fault.....I mean "the forks shake and are loose"?? is that what your saying? Just sounds like you did a bad job putting them on maybe. If you could take a photo of your finished build maybe i can help?
brother is your monorim had some scrahes too when you unboxing the red color i order in anmazon it had some scratches
No mate not at all.....If you are not happy i would just ask for a replacement. Amazon will pay postage. 👍
SlammDunk Productions yeah i already get my refund and order again if you see the monorim its look like old and to many scratches on the red area. i mean your monorim has zero scratch?
SlammDunk Productions what is the max speed of your xiaomi pro?
@@jesusisoursavior2682 Honestly my monorim arrived how you would expect it to....boxed as new, all wroapped up well not a spot on it....Sometime with amazon if people return items they end up getting forwarded onto the next customer.....Maybe someone had it before you and had a hard time trying to fit it, got his refund and it got sent to you? Who knows, its no good like is it :( My M365 pro is unlocked to go 32kph/25mph ✌
SlammDunk Productions yeah thats why i send it back they get this item on monday. but i already order new one i hope it came nice with no scratch.
Hello bro if I put this suspension can I put 10 inch tire ? Also ? Please reply bro
Sorry bro but its actually something i am curious about myself...its the next obvious upgrade but i dont think it can be done. Im looking for a way how to do it so if you find please let me know 🙏
SlammDunk Productions idk bro if I put this suspension can I put tire 10 mine is now 8.5 and yours ?
And bro I have trouble riding in stones would it help if I put this suspension? Bro ?
@@naseralyammahi4037 oh for sure. Makes a huge difference on all bumps. ✌️
SlammDunk Productions thank you bro :)
Thanks bro for sharing
You are most welcome! Cheers 👍
hey man does this kit work for the normal xiamo mi 365 to?
Yes! 🙂
Is it made out of steel or aluminum
"Made of High-Grade Aluminium and Steel" see: monorim.uk 👍
Hello can i put this on xiaomi s1 ?
Not sure actually sorry, but if you drop an email that Monorim I am sure they would answer your question 👍 cheers Bruno
Does those fit in other scooter
yeah i think so....check with Monorim first though before buying 👍
Hi there trying to trying to do this as speak and it feel so wobbly like missing a past any help please thanks
i would not be able to help without a lot more information than "feels wobbly". i feel that without something visual i probably cant help at all. It could be anything... sorry :( there will be other tutorials out there if you search for them. Mine is more of a timelapse than a full guide.
Awesome thanks
anytime!
Do you know if this would fit on the reid e4 plus?
i dont think so, but you could always ask Monorim themselves. 👍
Will it fit for hiboy s2 pro ?
I dont know for sure 100%, some have told me yes, but id reach out to Monorim and ask them. i am sure they will reply pretty quick 🙏
Hi, very good video! Pleasant to watch.
Does it affect the weight of the scooter?
Thanks
The suspension will add 6.1lbs to the scooter yes. ✌️
@@SlammDunkProductions Thanks for your reply!!!