I recently got into modding my M365. This looks totally doable! The controllers appear to be universal controllers! Not an expensive set of upgrades either
I didn't understand why you did all that work from minute 7:37 to 9:56, wasn't it enough to print and paste the simple paper template? to make the holes?
Very nice video and clean work on the scooter.... Planing to do the same. I have Xioami S1 with extra battery + Tuning at the moment running 37 kmh at full charge.. I would love to have a 2ed motor and more V your video is very helpful thank you 💪👍👏👏🇩🇪 keep up the good work 😍
Hello, could you or someone please help me? I have serious problems with my Xaomi Pro 2, I am getting warning flashes and beeps of error code 14, 27, and 35 (depends on if I just pushed the brake/gas/button reset). This occurred after downloading the application DownG. I want to revert it back to stock, or just get it working again. I was trying to unlock 35kph..
Just buy a controller for dual motors from the beginning. Aren't you afraid you will fry your controllers and battery from constant back current and other stress this will create? Otherwise it's a good video im thinking of doing something similar on mine
Great job guys! I'm thinking of doing the same thing on my scooter, but with some differences. My only question is, where did you find that spacer for the disc to mount on the motor. I've seen it at some point on the internet but now that I'm searching, I can't find anything! Once again, impressive work and really professional.
That isn't a spacer. It's an adapter to add a rotor to a freewheel hub of a bike. Such as a fixie flip flop hub . They make aftermarket motor covers with rotor mounts built in.
Μπράβο ΚΑΛΛΙΤΈΧΝΗ!!!👏👏 Xiaomi m365 τεχνοτροπίας Zero 10x Limited!!!😁🚀 Ο 3D printer κάνει θαύματα!!! Φυσικά τα συγχαρητήρια πάνε σε αυτών που το χειρίζεται!!👏👏👏 Τέλειο αποτέλεσμα!! Ούτε καλώδιο δεν φαίνεται!!👌
Nice - Some welds on my Aovopro clone's steering stem to front box have cracked badly (I bought an abused second hand scooter) so I'm thinking of getting another and doing likewise but I'm going to make a decent aluminium belly plate to support that weld better too- Is there any way I could keep the same display if I used a decent dual VESC?
@@EVCustoms No problems, If I have any luck in keeping that standard display with a double VESC I'll let you know how it's done, Thankyou for taking time out to answer my question. All the best mate.
That display you have 24m.13sec mark. ThebYFS-M2V1.2......do you know what model xaomi that is from? I have the same which was throwing up an e7 fault after the scooter had sat for a long while. I did a reset holding throttle, brake and power button then it worked and throttle worked but then after 15aeconds it completely died and now it wontvturn back on. Battery is charged and is 40volts. Any idea whatvthe problem is? Any idea where to but the display and from which model xaomi its from? I have searched everywhere and i cannot find one.
I dont belive that tiny Bms capable of handling 30 A constantly or ever 50 A Max as peak 🤣🤣🤣🤣🤣🤣 invest in good bms or someday you will see for yourself
@@EVCustoms believe that those chinese small "e-bikes" bms are not ideal for that much power , There are real good brands sometimes they can be a little bit bigger that these small ones but untill today i had no problems
i made 63v (fully charged) with a 500w motors (that handles like 1500w lol) i can peak to 70 kmh but i configure it with a slow acceleration otherwise it start burn and a i have to change my tire every month
So I’ve bought this Escooter named: electric scooter scooter Velocifero Mad Air 250W 10Ah, it said that it has Bluetooth and sport mode, but when I bought it, it didn’t show, I emailed them and they said that they disabled the functions so that the escooter would be legal to ride just like a bicycle, help me enable the functions please.
Hello, could you or someone please help me? I have serious problems with my Xaomi Pro 2, I am getting warning flashes and beeps of error code 14, 27, and 35 (depends on if I just pushed the brake/gas/button reset). This occurred after downloading the application DownG. I want to revert it back to stock, or just get it working again. I was trying to unlock 35kph..
кто такой гений у вас там что решил тяжёлый акум стойку руля повесить а лёгкие контроллеры в деке оставить и место полно свободного. не логично было на оборот?
Good job I've got the same 2 models as well as a few others but I'm glad to find this because I want t o do the same. Only thing that worries me is my stem from deck to handle bars head set snapped at the point with the cable holes and I've seen other Windgoos that have done the same, I've put a sleeve in side the tube and 4 bolts all the way through, 2 on each part N to S, and E to West, but it must be a weak spot so be careful and keep your eyes on it
Λεω να κανω το δικο μου 48βολτο αλλα σκεφτομαι εαν θα αντεξουν τα 36volt μοτερ (250watt). Να το ρισκαρω η να παρω κατευθειαν 2 48volt μοτερ της Monorim?
File den exeis na fovitheis tipota, to sigkekrimeno scooter mexri simera doulevei astamatita, kai ayto ginete epidi exoume dyo moter, diladi exoume grogori anaptiksi taxititas kai pio psiles telikes, se aytes tis taxitites to moter trava ligotero reyma etsi antexei perissotero kai xoris na thermenete simantika, to kolpo einai na apofigeis tis xamiles strofes, ekei pou to moter trava to perisotero revma.
nice work but i dont know who wants to drive a xiaomi going faster than 35km/s its not stable at all coz its too light. I limited mine at 32km/h back in the day. Now a days i am riding a dualtron eagle going 70km/h no problem at 75km/h its kind of unstable for the suspensions flexibility settings i am using.
Qand ces comme sa larondie je le fait avec une perceuse ou que tu mes la roue ces mieux car avec une lime ces un peu long enfin je pense un en tous cas t'assure bien frère sérieux
hi ! STL case link is broken, also quite embarasing for you, link let you see worpress login page . please can you provide it from prusa ou thingverse ? thx !
No is not slower... custom scooter finished first at 80m distance and have much more acceleration... the other Futecher scooter have high speed motor but lower torque, also custom xiaomi cost me about 500euros and Futecher price is about 1200euros...
Overcharge 250w or 350w motors using 48V battery will bring you to burn it very quickly. To do a correct work you have to change motor section phase cable, disable hall sensors in 1 motor, add 2 different brake levers, use a motor forged with brake disk predisposed, need also to add a magnetic brake, use different main boards, place a battery over the rear wheel for better stability, over a chest or brackets not on main steering tube, battery is also not well insulated very home made, electrical connectors aren't good, need to solder wire , and heat shrink with lighter?? Omg.... This video remember me like a teenager customized e-scooter, with only 1 objective: run fast and do not think to consequence.... You enhance people to do unsafety customization, I talk cause I work in a e-scooter repair factory in Italy, and I know what I seen, and cannot forgot how people injured for extreme stupidity.
Hello buddy. I'm waiting to see a work you've done in a video to comment on it... I'm sure I'll write you a book about the mistakes you've made, I'm saying it because I'm hear many people talking and at the end they are just words...
@@EVCustoms to be honest if ur controller is like in the range of 10-15amps then it might survive but I have burned two 250 and 300w motors with 48v battery and plus 10inch tire doesnt help at all - go for monorim wheel I have 28amp controller with 120% switch and it does 45km/h when fully charged also phase wires are still kinda small compared to ones on the controller and get warm with motor a bit but still thicker than those noodles on m365 Also the fact that its a scooter wheel that motor would have less stress on a bike wheel because of less load during acceleration 48v with anything less than 500w on a scooter is a bad idea and anyway cant use the full potential of the battery and if you live where is hills or mountains or need to cross them bye bye conroller/motor p.s. but who know those 250+250 motors are working together so the motor isnt being stressed as the load is spread between them so like I said if its reasonable amps on controller it might work out okay
I’m looking for someone that can build me a new Xiaomi with improved performance. I’m in New York City, please let me know if you can help or know someone
Ребята !!! При создании видео нужно вам понимать что ваше видео смотрят и ночью НЕ НУЖНО НА ЗАСТАВКЕ ВИДЕО МУЗЫКУ ВЫСТАВЛЯТЬ НА ВСЕ 100% ГРОМКОСТЬ ЗВУКА 🤬🤬🤬🤬🤬🤬
I recently got into modding my M365. This looks totally doable! The controllers appear to be universal controllers! Not an expensive set of upgrades either
Now that’s a brilliant content , creative, genius,inspiring well done creator 👏👏
Thank you Paul..!!
Your very welcome thank you for sharing 🙏
That is not a Xiaomi frame hence the alloy might not be as durable, be careful
I didn't understand why you did all that work from minute 7:37 to 9:56, wasn't it enough to print and paste the simple paper template? to make the holes?
I thought this as well, I also noticed it looked like the back motor was spinning in the wrong direction
same here
Yes... at the end i just plug learn mode and fix that, 3sec job..
And how you will cut the centre circle to center the template... by hand..? there you need precision...
Lovely build. I love the battery pack.
yeah with these nice 18650 garbage cells xD
LG cells is garbage?
Great video, I’m thinking of doing the same thing but will use VESC HD-60T TWIN for motors control..
Rich man
Ces vraiment du boulot d'ingénieur super
Thanks...you make soldering look easy....😃
Very nice video and clean work on the scooter.... Planing to do the same. I have Xioami S1 with extra battery + Tuning at the moment running 37 kmh at full charge.. I would love to have a 2ed motor and more V your video is very helpful thank you 💪👍👏👏🇩🇪 keep up the good work 😍
Thank mate.. i will wait for your conversion...;)
Hello, could you or someone please help me? I have serious problems with my Xaomi Pro 2, I am getting warning flashes and beeps of error code 14, 27, and 35 (depends on if I just pushed the brake/gas/button reset). This occurred after downloading the application DownG. I want to revert it back to stock, or just get it working again. I was trying to unlock 35kph..
Good job, I'm impressed.
Two questions, does regenerative braking work?
Do you have a driver link?
Yes regen working normally.. all universal controllers have regen mode,
This build catch me and the job looks very clean, I'mgonna plain a project like this!!!
It's recommended my friend.. ;)
Just buy a controller for dual motors from the beginning. Aren't you afraid you will fry your controllers and battery from constant back current and other stress this will create? Otherwise it's a good video im thinking of doing something similar on mine
What's the size of the spacer you used for mountin the brake rotor?
160mm
What was the dark blue wire you left disconnected?
Great job guys!
I'm thinking of doing the same thing on my scooter, but with some differences.
My only question is, where did you find that spacer for the disc to mount on the motor.
I've seen it at some point on the internet but now that I'm searching, I can't find anything!
Once again, impressive work and really professional.
Hi Marios.. here you can find it >>
a.aliexpress.com/_Euz7XHz
Xeretismata stin Ellada..
That isn't a spacer. It's an adapter to add a rotor to a freewheel hub of a bike. Such as a fixie flip flop hub . They make aftermarket motor covers with rotor mounts built in.
wasnt the back wheel going the wrong way?
Noticed the same, but the the polarity is wrong in the two connectors at 23:15 so that's probably the cause.
Oh…!!! I Need it..🙌🙌🙌🙌good job… how much It cost you…???
do you have a wiring diagram for the controllers to display
Μπράβο ΚΑΛΛΙΤΈΧΝΗ!!!👏👏 Xiaomi m365 τεχνοτροπίας Zero 10x Limited!!!😁🚀
Ο 3D printer κάνει θαύματα!!! Φυσικά τα συγχαρητήρια πάνε σε αυτών που το χειρίζεται!!👏👏👏
Τέλειο αποτέλεσμα!! Ούτε καλώδιο δεν φαίνεται!!👌
Na sai kala file Antoni..! mesa se ola imaste file, apo tin sxediasi ektiposi kai katasketi.. ;)
@@EVCustoms Βρε ΓΑΤΕΣ είστε!!! ☝️
Γάτες με ... ΠΈΤΑΛΑ!!!!👏👏
28:44 is it me or were the tires going opposite directions?
The the polarity is wrong in the two connectors at 23:15 so that's probably the cause.
Nice - Some welds on my Aovopro clone's steering stem to front box have cracked badly (I bought an abused second hand scooter) so I'm thinking of getting another and doing likewise but I'm going to make a decent aluminium belly plate to support that weld better too- Is there any way I could keep the same display if I used a decent dual VESC?
Yes is dangerous also..
About VESC.. i didn't have any experience.. sorry mate..
@@EVCustoms No problems, If I have any luck in keeping that standard display with a double VESC I'll let you know how it's done, Thankyou for taking time out to answer my question. All the best mate.
@@adammorris3082VESC's are good but not compatible with any screen you can buy except for davega or davega clones
nice build skills, but sad that you went for so low grade components. moving battery pack up from deck does not help either.
Very nice build i prefer use xiaomi original controller! can you share where do you get the sticker to make the hole's for the disc?
Of course my friend.. write me your email
@@EVCustoms I will send you a pm
What is max speed and range ?.
Where can I find out bro
That display you have 24m.13sec mark. ThebYFS-M2V1.2......do you know what model xaomi that is from? I have the same which was throwing up an e7 fault after the scooter had sat for a long while. I did a reset holding throttle, brake and power button then it worked and throttle worked but then after 15aeconds it completely died and now it wontvturn back on. Battery is charged and is 40volts.
Any idea whatvthe problem is? Any idea where to but the display and from which model xaomi its from? I have searched everywhere and i cannot find one.
I dont belive that tiny Bms capable of handling 30 A constantly or ever 50 A Max as peak 🤣🤣🤣🤣🤣🤣 invest in good bms or someday you will see for yourself
Until now it working perfectly... didn't warm at all...
@@EVCustoms believe that those chinese small "e-bikes" bms are not ideal for that much power , There are real good brands sometimes they can be a little bit bigger that these small ones but untill today i had no problems
You have to have that kind of printer to DIY this... I'll just buy a one scooter. But thanks for the education.
Interesting , but on your race both Xiaomi scooter run same fast -original and your modified one . So why all these work ?
i made 63v (fully charged) with a 500w motors (that handles like 1500w lol) i can peak to 70 kmh but i configure it with a slow acceleration otherwise it start burn and a i have to change my tire every month
Yes.. at this high voltages currents must be to low... i also make a video with higher voltages.. modifying 72v 1500w controller..
@@EVCustoms how do you upgrade the controller, just by changing the 63v capacitor or need to buy a new one ?
@@Michael-jo2fw Just other cheap and bigger controller..
Did You measure the current from battery? Those china controllers are probably not 350W.
Hi friend.. yes i measured them with power meter...
You skipped showing how you placed the battery on the handle.
So I’ve bought this Escooter named: electric scooter scooter Velocifero Mad Air 250W 10Ah, it said that it has Bluetooth and sport mode, but when I bought it, it didn’t show, I emailed them and they said that they disabled the functions so that the escooter would be legal to ride just like a bicycle, help me enable the functions please.
Soy Antonio como hago para que camine más rápido mi monopatín navee v25i pro
Bro that is awesome idea I like it that scooter
Don't now what country you from, but if could make me one that will be awesome I pay you.
Hello. Do you know how I can place extra battery and extra motor in my turboant x7 pro? Good video
Where buy parts for same scooter ? Thanks
Hello, could you or someone please help me? I have serious problems with my Xaomi Pro 2, I am getting warning flashes and beeps of error code 14, 27, and 35 (depends on if I just pushed the brake/gas/button reset). This occurred after downloading the application DownG. I want to revert it back to stock, or just get it working again. I was trying to unlock 35kph..
Its broken now
@@denskreenen6968 nah infact I reset the controller from the inside. Now I'm riding bout 40km/h
кто такой гений у вас там что решил тяжёлый акум стойку руля повесить а лёгкие контроллеры в деке оставить и место полно свободного. не логично было на оборот?
проводки много будет снаружи.
Great but one thing is missing, an eject button!
haha... κάποια φάση θα γίνει και αυτό!
Amazing skills great video but it's so much work to upgrade I would just go out and buy a more powerful scooter
😄😆😃
Good job I've got the same 2 models as well as a few others but I'm glad to find this because I want t o do the same. Only thing that worries me is my stem from deck to handle bars head set snapped at the point with the cable holes and I've seen other Windgoos that have done the same, I've put a sleeve in side the tube and 4 bolts all the way through, 2 on each part N to S, and E to West, but it must be a weak spot so be careful and keep your eyes on it
Totaled a frame yesterday
How fast is going
Nice work man
I have to envivo scooters end wil try do the same with it
Do you have stl files of that battery case that you make ?
Thanx 😊
ok but the rear wheel spin the wrong way.. and no test? i understand why..
Top speed?
45-47km
Λεω να κανω το δικο μου 48βολτο αλλα σκεφτομαι εαν θα αντεξουν τα 36volt μοτερ (250watt).
Να το ρισκαρω η να παρω κατευθειαν 2 48volt μοτερ της Monorim?
File den exeis na fovitheis tipota, to sigkekrimeno scooter mexri simera doulevei astamatita, kai ayto ginete epidi exoume dyo moter, diladi exoume grogori anaptiksi taxititas kai pio psiles telikes, se aytes tis taxitites to moter trava ligotero reyma etsi antexei perissotero kai xoris na thermenete simantika, to kolpo einai na apofigeis tis xamiles strofes, ekei pou to moter trava to perisotero revma.
Άρα αυτό που έχει σημασία είναι η ισχύς που τραβάει το μοτέρ ανεξάρτητα από την τάση, σωστά?
@@rafganX Nai alla.. Oso pio polu ksefevgeis apo tis prodiagrafes tou moter toso pio polu xaneis sto efficiency..
@@EVCustoms Κατάλαβα, ευχαριστώ πολύ!
Does the universal controller connect to the phone app?
no....
Bonjour je vous envoie ma trottinette Segway-Ninebot g30le combien coûte pour le travail ? Merci
Just think when they make e scooters legal they will also legalise e cycles that are altered so you dont have to peddle to start motor / in UK
They already exists 😅
only thing that should be on steering column is maybe pwm for better cooling
can you show a wiring diagram picture??
I do have a hitway and work on 2WD Upgrade need help to wire this crap together...
nice work but i dont know who wants to drive a xiaomi going faster than 35km/s its not stable at all coz its too light. I limited mine at 32km/h back in the day. Now a days i am riding a dualtron eagle going 70km/h no problem at 75km/h its kind of unstable for the suspensions flexibility settings i am using.
Like the conversion, but the display lools awful and much worse than original. Also you dont show how you remounted the brake assembly again.
how km?
That's insane, how much and when? 😂
Cuánto cuesta hacerle ese trabajo a un monopatín
Bro could I just send you my scooter 😍 amazing job I'd love to do this to my mi 3
My friend i live in Cyprus 😄😆
@@EVCustoms it's cool I'll travel on foot🤣🤣
😆😄
@@EVCustoms probably take me a year or 2 considering how lazy iv become 🤣 I rely on my scooter now days 😭😂
I need your info I would like to send u a pic of my scooter I would like to have this done
What is the top speed?
46km with gps my friend..
Qand ces comme sa larondie je le fait avec une perceuse ou que tu mes la roue ces mieux car avec une lime ces un peu long enfin je pense un en tous cas t'assure bien frère sérieux
Efsane olmuş
Tengo una de esa donde la puedo modificar así soy de 🇩🇴🇩🇴🇩🇴
hi ! STL case link is broken, also quite embarasing for you, link let you see worpress login page . please can you provide it from prusa ou thingverse ? thx !
The link working fine..
@@EVCustoms because you logged in on you wordpress. try from another computer you will see
Ahh...i just saw it.. thank you for the correction,, try now..
@@EVCustoms working now . thanks !
all this work and then it is slower than the other scooter?!?! nice
No is not slower... custom scooter finished first at 80m distance and have much more acceleration... the other Futecher scooter have high speed motor but lower torque, also custom xiaomi cost me about 500euros and Futecher price is about 1200euros...
Custom scooters and high-end scooters are not the same. Dual motor hub doesn't always mean speed.
With dual motor you have acceleration and health motors...
👍👍👍👍👍👍👍👍
Overcharge 250w or 350w motors using 48V battery will bring you to burn it very quickly.
To do a correct work you have to change motor section phase cable, disable hall sensors in 1 motor, add 2 different brake levers, use a motor forged with brake disk predisposed, need also to add a magnetic brake, use different main boards, place a battery over the rear wheel for better stability, over a chest or brackets not on main steering tube, battery is also not well insulated very home made, electrical connectors aren't good, need to solder wire , and heat shrink with lighter?? Omg....
This video remember me like a teenager customized e-scooter, with only 1 objective: run fast and do not think to consequence....
You enhance people to do unsafety customization, I talk cause I work in a e-scooter repair factory in Italy, and I know what I seen, and cannot forgot how people injured for extreme stupidity.
Hello buddy. I'm waiting to see a work you've done in a video to comment on it... I'm sure I'll write you a book about the mistakes you've made, I'm saying it because I'm hear many people talking and at the end they are just words...
@@EVCustoms to be honest if ur controller is like in the range of 10-15amps then it might survive but I have burned two 250 and 300w motors with 48v battery and plus 10inch tire doesnt help at all - go for monorim wheel I have 28amp controller with 120% switch and it does 45km/h when fully charged also phase wires are still kinda small compared to ones on the controller and get warm with motor a bit but still thicker than those noodles on m365
Also the fact that its a scooter wheel that motor would have less stress on a bike wheel because of less load during acceleration
48v with anything less than 500w on a scooter is a bad idea and anyway cant use the full potential of the battery and if you live where is hills or mountains or need to cross them bye bye conroller/motor
p.s. but who know those 250+250 motors are working together so the motor isnt being stressed as the load is spread between them so like I said if its reasonable amps on controller it might work out okay
on my xiaomi pro 2 scooter it has 1300w and it accelerates from 0 to 36kmh in 4 seconds on full charge
More detail about the scooter pls
Is it dual drive scooter?
mine does 0-30 in 2.5 seconds @@princecharles3452
its worth mentioning that the scooter is 60v with dual 300w motors and dual 25a controllers @@princecharles3452
Creative content but this is not Xiaomi scooter but fake copy off it , on genuine Xiaomi frame welding is completely smooth
Yes i agree... Xiaomi frame dimensions (copy of Xiaomi)
Before: FWD after: AWD
high center of gravity equals poor driving and handling...
Can you do that to mines I will pay you?
thats nice
I need u to do the same thing for me
Hay Dios mio!
Como se te ocurre hacer semejante pe.....
Y luego porque los hombres vivimos menos 🤣😂
esta mal colocada la rueda de atras... se frena sola y no deberia...
Nice one
very good bro
tres bien
I’m looking for someone that can build me a new Xiaomi with improved performance. I’m in New York City, please let me know if you can help or know someone
need front brake
Ребята !!! При создании видео нужно вам понимать что ваше видео смотрят и ночью НЕ НУЖНО НА ЗАСТАВКЕ ВИДЕО МУЗЫКУ ВЫСТАВЛЯТЬ НА ВСЕ 100% ГРОМКОСТЬ ЗВУКА 🤬🤬🤬🤬🤬🤬
😂🤣😆... Prinito! sleduwij raz postaraemsia potiwe .. ;)
it not clear this video.
Personne a vue qu'il avait monté le moteur a l'envers ? les roue tournais pas dans le même sens lol
Cool vid but definitely not how you mark out or tap thread, use measurements to mark it out and don't hold the tap Crooked grrrr😬
Anybody notice the rear wheel is going the opposite way to the front??
Yes, it was at testing, after that i reverse the motor to proper direction just buy plug two wires.
Robinson Lisa Clark Gary Perez George
Лично для меня Xiaomi полная хрень я предпочитаю более мощные самокаты например dualtron X2
Μερακλής
"xiaomi"
Buelaaaaa
100% better then x9 wuuufff x9 scooter very bad experience unquality product
tout ça pour pas rouler au dessus des 25km/h
Battery controller said 13 cell max 💀
13 cells is 48v
epic fail, uses literally the worst batteries you can get
Give me the scooter for 100.000 dollar for you
Fake is not 1700watt is 700 watt motor 350+350=700
😂😂
1700W at start.. Learn to make some correct calculations..
Your video have so many ads! So annoying.
Eso No es Un Xiaomi No Engañes👎
This is not xiaomi frame :)
Xiaomi frame.. ;)
its a bad build. very unsave with this battery on the pole. maybe you shoud mantion that to your audience how bad riding this scooter feels?
This is creativity just congratulate..