A lot of viewers have been real thankful for our DIY videos and have ask if there was a way to buy us a Beer. RUclips now has a ‘THANKS’ button under every video, Just click the button. 😀 It’s not required or expected, but it is appreciated. THANK YOU!
Just did this and it 100% worked I just put tape on the right one and good as new. You saved me hundreds of dollars I hope your pillows are cool on both sides forever
Thank you so much! We had a crazy week of our fridge, washer and 2 cars dying on us. We replaced the fridge and washer and got the cars fixed. Of course the tv would start acting up on us the second we had everything all set. Thanks to you and your great user friendly directions we didn’t have to add a tv to the list of things to buy or have someone fix. Thank you so very much! It worked!
A repair Shop affiliated with Samsung told me that the pannel was not good anymore and to replace it it would cost me 600$ ... i tried this and it worked , thank you so much
I have no idea how much money I have saved because of your video. Every service I called said it's not worth fixing this this and I will be better off with buying a new TV. Well little do they know, there is a godlike guy on youtube who used a small piece of tape and fixed the whole issue within MINUTES. Thank you 🙏 you are amazing!
I was minutes away from posting our tv up for sale for peanuts, tried googling if there's a solution one more time and found this diamond of a video. Had to try multiple times taping over the pins before found the right place but fixed the flickering problem like a charm. Probably saved me hundreds of pounds, thank you so much
I never write comments on RUclips videos but this one deserves it. You saved me so much time, money, and headaches. For those reading, it did take a good amount of tries to figure out which strip needed the tape but when you get the clear picture, it’s a great feeling. Thank you SOOO much for this video and your assistance! Is there a way I can support you or your business to show my gratitude?
Thank you so much for this video. Wasn't totally sure what I was doing but my dad and I tried our best to follow your instructions and we fixed it! Thank you so much!
Thank you so much. Saved a lot of time and money. I wasn't seeing any picture when I removed either of the connectors but still proceeded to put the tape on the right connector leaving the first 10 pins and it worked like magic!
Omg!I usually don't comment but you saved me money! At first I kept putting it in the wrong place but after cutting the tape thinner and starting from left to right not right to left on the left strip I finally got it to stop flickering. Took about 2 hrs but definently worth it. Thank you so much ❤
from left to right? Which way did you have the TV then? did you leave the 10 pins on the right side open and then cut the tape smaller and smaller on the other side?
@@baron4238 hey, what I meant was that i was putting the tape on the wrong side. You know how in the video his problem is on the right strip, so he puts the tape on the right strip counting the ten lines from right to left? My problem was on the left strip not the right. But I, like the guy from the video counted the 10 lines from right to left on the left strip(not the same as his since his was the right strip) in stead of counting the 10 lines from the left to the right. When I finally did it the right way with like 1 inch of tape it worked and is still working till today.🤗
Instructions unclear I am now wrapped in tape… just kidding thanks a million man! Samsung had quoted me $450 to swap the LCD panel. I owe you big time!
This is my first ever youtube comment and it is worth it! You have saved me a large amount of money replacing my TV 👍🏽👍🏽 I did had to trial and error a couple of times between the sides as when I took the ribbon out to find which side was causing it I got a black screen 😆
I really thought that this was somekind of bull$hit. I was like it cant be real. Well turns out this works. Counted 10pins from the side and put some packaging tape on right side ribbon. And now my tv no longer flickers. Cheers bro, you literally saved me.
It really worked. On the right side, the first 12 pins free, then about 17 or a few more covered with tape. And them the flickering is over. Thanks man !
Thank you! Thank you! Thank you! You're a life saver! On the Samsung communities they have you reset the image, reset the entire TV disconnect any periphicals (like that makes a difference if you have this issue on the on screen menus as well :( ) In addition to this my experience: -Pull one flat cable: no image at all -Pull the other flat cable (putting the first one back of course): no image at all So, I thought I had really broken the TV now! -Push both cables back: image was back and after a few minutes the issue re occurred. -Just taped from about the 10th pin on one of the cables (50% chance I have right one ;) ): issue seemed to be gone, but so was about 10 cm of the image on the left side :( -Cut off a piece of tape of about 4mm in width. Taped that on the place where I had just put the wider piece of tape: yes! The issue was gone and I had the complete image! So as it turns out, one can easily fix this with a piece of tape!
Our TV is currently doing this, we are trying this fix, will update with results. Nothing is coming on when we disconnect either connecter, but I’ve seen other comments saying it works anyways, so I figure what do we have to lose? Edit: it works!!! Thank you!!! Saved us so much money!
Well, I can't figured which connector is problematic because with one unplugged I didn't have picture at all. I used tape hack for right connector and it's fixed! Thank you:)
works for me.. from 11th pin to 20th..but you have to try correct side of flexi connector.. First not worked, but i put tape on other side of connector and it worked.. great.thanks
It worked. It took me a few tries to get the right amount of pins covered. After that there was a black line of the side of the screen, that was fixed by cutting the tape in half. Thank you so much for your video!
Problem with flickering screen disappear 🫡👌 but still have that black line on … u said to cut the tape on half meaning… I tied to cut a long, then in width and still can’t manage it… can you explain me… will really appreciate
Very helpful and did the trick thanks. Would be interesting to know why it works. For anyone else attempting this repair, I found it much easier to guess 10 pins in (because they are tiny), put a thin strip of tape where I thought it should be (cut 2/3rds off the width of standard tape) and then took a photo on my phone and zoomed in to count them, adjusting accordingly.
Came here to say: this worked!! Had to place the tape a 2nd time but it’s working now. I got this tv refurbished from Samsung after my first one started having issues, and a month in it started with this. Hopefully this lasts longer than the job they did! Thanks so much
I tried it and worked like a charm!! I couldn't view the TV to check which ribbon cable it was so I placed the tape about where you put it, plugged TV in got it right on the 1st try Thank you P.S. If it goes out again I think I'll just replace the Ribbon Cable
Thanks you.. i gave my TV to three service guys and they all said that i need new TV or repair will be expansive. Today i almost wanted buy new tv for 600€ but i tried your advice and i hope it will last. You saved much money for people out there.
Thank you for your video. I fixed my tv using this method and i confirm it works! I had to place my tape on the left ribbon connector, as that was where my problem was. I used a piece of tape about 1cm wide, on the 11th pin (leaving 10 pins unblocked from the left side)
Amazing! I don’t know how you figured out this work around! Worked on my 55” Samsung Smart TV!!! I had my doubts, thank you! You must work for Samsung to have come up with this fix!
Removing either ribbon just made the whole screen blank. But I tried the sticky tape anyway and it worked! Here's a tip, if you can't read the pins coz they're too small, take a close up pic on your phone then zoom in your saved photo to count how many you've taped over
Brilliant video, however it would have been good to find out how to remove the back plate of the TV. I had to watch another video to find this out. TV working perfectly again, many thanks to you.
Just curious for info these pins 11-21 have definitely some function as per manufacturer...so by putting tape on these pins we block or isolate, signals/voltage, from these pins to mother board...??? And the jumping problem is resolved...??
I just stumbled upon your video and fixed my Samsung The Frame 2020, 55inch. It had similar issues and at first I only saw one ribbon so I was confused. After looking further I saw on the bottom two small ribbons that were connected with the big one. So these were indeed for the left and right side of the screen. However blocking pin 11-20 with tape didn't solve it entirely, as I had grey lines on top and throughout the screen and some other green lines. It was pretty watchable but I tried some more pins and eventually blocking pin 12-20 solved it entirely for me :-) Thanks so much!
Thankyou! This helped me. When i tried to check which one was the issue i couldnt find it. As i removed one side the screen turned completely black. So i assumed as you did and chose the right one. And left 10 pins from the right and on the 11 i put the tape. Tape was 1 cm wide. After that screen works perfectly. Thanks
100% works. 👏👏Thanks a lot for the video buddy. My tv is samsung UE50RU7470U. I had same problem but finding which connector was causing issue was pain. If I disconnect one connector my screen will go blank not like shown in the video. So I made a lucky guess and tapped 10 pin after on right strip connector and it worked. 👏👏
Thank you so much, i had a problem with my tv, in this case, the left side of the panel was grey-ish and the right side was normal. I had another T-con board with different flexible cables, so i just changed the right side cable and it worked.
Disconnecting either side left me with no picture at all, but I just applied the tape on the right side and it worked. My tape was a bit thicker than yours and maybe covered up too many pins and left me with small black strip on the right, no flickering though.. cutting the tape in half width ways seemed to do it, smaller than that left me with horizontal lines.. anyway thanks for the solution dude
Stupidly easy fix for an even stupider issue, this worked for me too! Cut some tape in half and covered ten pins from the right on the right strap and it worked!
I have a UE65KU6680. For that TV, each disconnected connector makes the screen blank. I chose the top connector (same wire as the right one). After about ten contacts (from the top of the connector), I isolated the about next ten contacts with a piece of tape sticked on the wire. I didn't count accurately and probably got lucky because that totally solved the flickering issue. Thanks a lot, my TV is happy. I would like to know HOW electronically these deconnections resolve the subject. Often a problem is created by lost contacts but here it's the oposite. Please explain it to me ! .
actually the problem comes from the tab cof of the panel ,so to resolve this issue we disconnected the signal ( feed back) from ckv pins to ic controller .
Awesome! This solution works perfectly. 😂😂 I must say it was a haslet trying to open my TV. But it paid off. I would have spent so much money for a repair service. Thanks man
I have a Sony led with this issue but my tcon ribbons don't isolate left or right half of screen. Should I be focusing on the CKV points? I have CKV 1 - 4 and CKVB 1 - 4.
This worked to solve the initial jumping display but drastically reduced the color output on the left side. I replaced the Tcon cables on both sides and the jumping issue returned so I put the taped cable back.
The question would be what pins are really the culprit? Are there pins I can leave uncovered that will fix the color issue without reintroducing the jumping issue?
Solved! Thank you , it worked. I have seen many similar clips, but only in this one is a Samsung model like mine. The problem for me was on the left plug. I succeeded the first time with a wide size but I wanted to reduce it to 3 pins. The problem reappeared but not as obvious as the first time. I came back with the wide size and it works. What changes did I make to remove these pins? What differences should I notice on the display?
Samsung UE50NU7400 worked for me! My screen was all black when i unplugged a cable, covered the same cable from pin 11 to 24 inclusive. Hope the problem does not start again, THANKS A LOT! Grazie 1000 sei grande!
I factory resetted my smart samsung tv and it worked also to fix wifi not connecting just turn off your wifi for 30s and turn it back on. I wasted 200 dollars for delivery and a repair shop that's highly rated couldn't even fix this problem and they had a month to fix it.
Unreal - honestly thanks to this legend for posting this video. Also, my fix was to cover the left ribbon - 10pins from the left. Took me 5 go’s but it works!!!
Hey man i tried your technique, it works but I still have a difference between the two sides (mostly with colours) any ideas? Thanks (Modifications) Okay i tried again but with the tape at 2 and not 10 wich i saw on another video and it worked perfectly lol thanks man this is so usefull !
Mixed results on my 50 inch Samsung UN50NU6900. Less flickering but still twitches, I will let it run for a few hours to see if it worsens. I have to redo the tape and zoom some pics to make sure I covered all the right pins 11-20. This really seems to get worse as temperature increases and, as an electronics engineer, I am tempted to reflow the board as a last resort to see if that fixes it. What signals are present in those blocked pins 11-20, please ? I would like to understand WHY we are blocking those pins. Thank you.
I have a 50inch Series 7 doing the same thing (UE50RU7400UXXU). Watching the video you said to cover from pin 11. In the comments you said 11 up to 20 should be covered. In the video I paused at the close up and counted the pins but that wasn't what you covered. You seemed to cover pins 12 or 13 all the way up to pin 30. Can you explain If I should follow video or comments.
It takes patience and trial & error. A piece of tape roughly 2/8"‐3/8" thick worked for me. In rhe video his tape is on the right side of the right cable. For me, I had to put it on the left side of the left cable (they were opposites). If you put the tape in the wrong spot, regardless of the size of tape, you will get all black, half black, a black bar, or plaid (my wife thought that was hilarious). If you can get the black bar or black half, watch the screen for a few minutes. If the flickering resumes, then you should have the correct cable but wrong pins. If you don't see the flickering when half the screen is blacked out, you taped the wrong cable. Again, if it is the left cable, count 10-12 pins in from the left edge; if it is the right cable, count 10-12 pins in from the right edge. Hope that helps anyone.
omg thank you man I was close to giving up, read your reply carefully and I knew I was on the right path. Swapped the tape to right side of right cable, pins 12-30 roughly and it worked! Thank you my guy
I can't exactly understand if you mean to cover 10 lines with tape, or put tape after the 10th line. I'll try to do it tonight and hopefully it'll work!
Wow! Thank you it worked. Maybe i need to cover more pins with tape... flickering has completely stopped, but i have a 1cm wide vertical black line on the left of the screen
@@repoapps hey thanks for trying to help get rid of the line, I tried leaving the 1st 9, 10, 11 & 12 pins exposed and the line is still there. Gonna put the back on... unless there's anything else I can try. Ps. I'm using 4mm wide tape
Thanks for the video, I tried the trick and it worked for the flickering (right band was damaged) but now I have a vertical black line on the left outer part of the screen. Do you know what I can do about it ?
What’s the purpose of the tape? How many pins over any how many pins should the tape cover? Do you look for a visibly bad pin? I could seem to figure out how to determine this.
I think I used tape too thick, it removed the picture jumping problem great, but with the tape I used I also lost a small strip of picture on the far right, will try to reduce the tape width..
Hi Friend, first of all congratulations for the video. I wanted to ask you for help: I have a problem with my Samsung LE40B530P7WX TV because it has horizontal stripes. I did several tests but nothing. Could you tell me which are the PINs that I have to block with the tape, I can not understand which is the trace of the signal (VCOM, CLKN, CLKP, CPV, STV, VGM ....) that is causing the problem. A thousand thanks.
Hello, I'm tempt to try that tutorial, but my symptom isn't a double line flickering like yours. I'm getting a snow dots rectangle flickering blink, like 5 cm on the right. Would covering the 'CKV' like also be the solution ?
Thank you so much it’s wonderful and it’s working.⭐️⭐️⭐️⭐️⭐️ One question?! ⚠️🛑🛑 With that method i will miss some features or quality of the picture ?
Thank you for the video! It's fixed the issues however i can't seem to get the color to correctly work now. It's fades the color out now from left to right. Might be time for a new tv. Thank you though
This worked for me, I disconnected those 2 strips trying to trouble shoot which side was bad and the screen wouldn’t illuminate if only 1 was connected so I reconnected both sides and the double-vision flickering went away, I guess they just needed to be re-seated
A lot of viewers have been real thankful for our DIY videos and have ask if there was a way to buy us a Beer. RUclips now has a ‘THANKS’ button under every video, Just click the button. 😀 It’s not required or expected, but it is appreciated. THANK YOU!
What kind of tape and why 10 spots over?
bro how much would it cost to do this in a shop?
Just did this and it 100% worked I just put tape on the right one and good as new. You saved me hundreds of dollars I hope your pillows are cool on both sides forever
Thank you so much! We had a crazy week of our fridge, washer and 2 cars dying on us. We replaced the fridge and washer and got the cars fixed. Of course the tv would start acting up on us the second we had everything all set. Thanks to you and your great user friendly directions we didn’t have to add a tv to the list of things to buy or have someone fix. Thank you so very much! It worked!
A repair Shop affiliated with Samsung told me that the pannel was not good anymore and to replace it it would cost me 600$ ... i tried this and it worked , thank you so much
Happy For You 😊
I have no idea how much money I have saved because of your video. Every service I called said it's not worth fixing this this and I will be better off with buying a new TV. Well little do they know, there is a godlike guy on youtube who used a small piece of tape and fixed the whole issue within MINUTES. Thank you 🙏 you are amazing!
I was minutes away from posting our tv up for sale for peanuts, tried googling if there's a solution one more time and found this diamond of a video. Had to try multiple times taping over the pins before found the right place but fixed the flickering problem like a charm. Probably saved me hundreds of pounds, thank you so much
I never write comments on RUclips videos but this one deserves it. You saved me so much time, money, and headaches. For those reading, it did take a good amount of tries to figure out which strip needed the tape but when you get the clear picture, it’s a great feeling. Thank you SOOO much for this video and your assistance! Is there a way I can support you or your business to show my gratitude?
Thank you so much for this video. Wasn't totally sure what I was doing but my dad and I tried our best to follow your instructions and we fixed it! Thank you so much!
Thank you so much. Saved a lot of time and money. I wasn't seeing any picture when I removed either of the connectors but still proceeded to put the tape on the right connector leaving the first 10 pins and it worked like magic!
Omg!I usually don't comment but you saved me money! At first I kept putting it in the wrong place but after cutting the tape thinner and starting from left to right not right to left on the left strip I finally got it to stop flickering. Took about 2 hrs but definently worth it. Thank you so much ❤
from left to right? Which way did you have the TV then? did you leave the 10 pins on the right side open and then cut the tape smaller and smaller on the other side?
@@baron4238 hey, what I meant was that i was putting the tape on the wrong side. You know how in the video his problem is on the right strip, so he puts the tape on the right strip counting the ten lines from right to left?
My problem was on the left strip not the right. But I, like the guy from the video counted the 10 lines from right to left on the left strip(not the same as his since his was the right strip) in stead of counting the 10 lines from the left to the right. When I finally did it the right way with like 1 inch of tape it worked and is still working till today.🤗
Instructions unclear I am now wrapped in tape… just kidding thanks a million man! Samsung had quoted me $450 to swap the LCD panel. I owe you big time!
This is my first ever youtube comment and it is worth it! You have saved me a large amount of money replacing my TV 👍🏽👍🏽
I did had to trial and error a couple of times between the sides as when I took the ribbon out to find which side was causing it I got a black screen 😆
Thank you soooooo much!!! I just fixed my 49” LG now with your instructions!! You deserve a million likes!! 🙌🏻
I really thought that this was somekind of bull$hit. I was like it cant be real. Well turns out this works. Counted 10pins from the side and put some packaging tape on right side ribbon. And now my tv no longer flickers. Cheers bro, you literally saved me.
Not clear. So we have ti left 10 mins and need to put tape from 11th pin? How many pins we have to block?
It really worked. On the right side, the first 12 pins free, then about 17 or a few more covered with tape. And them the flickering is over. Thanks man !
Glad it helped
Thank you! Thank you! Thank you! You're a life saver! On the Samsung communities they have you reset the image, reset the entire TV disconnect any periphicals (like that makes a difference if you have this issue on the on screen menus as well :( )
In addition to this my experience:
-Pull one flat cable: no image at all
-Pull the other flat cable (putting the first one back of course): no image at all
So, I thought I had really broken the TV now!
-Push both cables back: image was back and after a few minutes the issue re occurred.
-Just taped from about the 10th pin on one of the cables (50% chance I have right one ;) ): issue seemed to be gone, but so was about 10 cm of the image on the left side :(
-Cut off a piece of tape of about 4mm in width. Taped that on the place where I had just put the wider piece of tape: yes! The issue was gone and I had the complete image!
So as it turns out, one can easily fix this with a piece of tape!
Our TV is currently doing this, we are trying this fix, will update with results. Nothing is coming on when we disconnect either connecter, but I’ve seen other comments saying it works anyways, so I figure what do we have to lose?
Edit: it works!!! Thank you!!! Saved us so much money!
Well, I can't figured which connector is problematic because with one unplugged I didn't have picture at all. I used tape hack for right connector and it's fixed! Thank you:)
works for me.. from 11th pin to 20th..but you have to try correct side of flexi connector.. First not worked, but i put tape on other side of connector and it worked.. great.thanks
It worked. It took me a few tries to get the right amount of pins covered. After that there was a black line of the side of the screen, that was fixed by cutting the tape in half. Thank you so much for your video!
I literally had 100% same issue. Cut the tape in half solved the black line, flickering is gone too. This man is godlike
Problem with flickering screen disappear 🫡👌 but still have that black line on … u said to cut the tape on half meaning… I tied to cut a long, then in width and still can’t manage it… can you explain me… will really appreciate
Very helpful and did the trick thanks. Would be interesting to know why it works. For anyone else attempting this repair, I found it much easier to guess 10 pins in (because they are tiny), put a thin strip of tape where I thought it should be (cut 2/3rds off the width of standard tape) and then took a photo on my phone and zoomed in to count them, adjusting accordingly.
Came here to say: this worked!! Had to place the tape a 2nd time but it’s working now. I got this tv refurbished from Samsung after my first one started having issues, and a month in it started with this. Hopefully this lasts longer than the job they did! Thanks so much
You have or had jutter not flicker.
Thank you so so much. I calculated precisely from 11th to 20th pin and put the tape over. All the problems are fixed. I really can't thank you enough.
I tried it and worked like a charm!! I couldn't view the TV to check which ribbon cable it was so I placed the tape about where you put it, plugged TV in got it right on the 1st try Thank you P.S. If it goes out again I think I'll just replace the Ribbon Cable
Thanks you.. i gave my TV to three service guys and they all said that i need new TV or repair will be expansive. Today i almost wanted buy new tv for 600€ but i tried your advice and i hope it will last. You saved much money for people out there.
Thank you for your video.
I fixed my tv using this method and i confirm it works! I had to place my tape on the left ribbon connector, as that was where my problem was. I used a piece of tape about 1cm wide, on the 11th pin (leaving 10 pins unblocked from the left side)
Amazing! I don’t know how you figured out this work around! Worked on my 55” Samsung Smart TV!!!
I had my doubts, thank you!
You must work for Samsung to have come up with this fix!
i'm happy for you 😉
Removing either ribbon just made the whole screen blank. But I tried the sticky tape anyway and it worked! Here's a tip, if you can't read the pins coz they're too small, take a close up pic on your phone then zoom in your saved photo to count how many you've taped over
How many are you supposed to tape over from the 10th pin ?
10 pins
@@repoapps thanks
From the 10th pin on wards? Or start at 0
yes from the 10th pin cover 10 pins
Thanks bro it was a smooth fix for me. 🙃
The tricky part is counting the 11th to 20th on the ckv cable other than that, everything is easy.
Best repair video on youtube. Fix my tv in 20 min. Thanks you so much.
Can’t thank you enough man I just saved around 150$ following your method 👏🏽
happy for you ❤️
Brilliant video, however it would have been good to find out how to remove the back plate of the TV. I had to watch another video to find this out. TV working perfectly again, many thanks to you.
Took me a bit of time to get the back of and to find the pins but can confirm. This 100% works. Great video. Thanks man.
As crazy as this repair looks, it really does work. Thank you
Just curious for info these pins 11-21 have definitely some function as per manufacturer...so by putting tape on these pins we block or isolate, signals/voltage, from these pins to mother board...??? And the jumping problem is resolved...??
Tried this fix on a Hisense TV and it worked a treat . Thanks for the tip. Amazing .
I just stumbled upon your video and fixed my Samsung The Frame 2020, 55inch. It had similar issues and at first I only saw one ribbon so I was confused. After looking further I saw on the bottom two small ribbons that were connected with the big one. So these were indeed for the left and right side of the screen.
However blocking pin 11-20 with tape didn't solve it entirely, as I had grey lines on top and throughout the screen and some other green lines. It was pretty watchable but I tried some more pins and eventually blocking pin 12-20 solved it entirely for me :-) Thanks so much!
Thankyou! This helped me. When i tried to check which one was the issue i couldnt find it. As i removed one side the screen turned completely black. So i assumed as you did and chose the right one. And left 10 pins from the right and on the 11 i put the tape. Tape was 1 cm wide. After that screen works perfectly. Thanks
happy for you 😉
For me, it took some time to figure out the 10th pin and after that, the trick worked for me as well. Thanks
100% works. 👏👏Thanks a lot for the video buddy. My tv is samsung UE50RU7470U. I had same problem but finding which connector was causing issue was pain. If I disconnect one connector my screen will go blank not like shown in the video. So I made a lucky guess and tapped 10 pin after on right strip connector and it worked. 👏👏
Where is he getting 10 from? I’m counting 12 to where he put the tape and 20 to where that burnt line is
Thank you so much, i had a problem with my tv, in this case, the left side of the panel was grey-ish and the right side was normal. I had another T-con board with different flexible cables, so i just changed the right side cable and it worked.
Disconnecting either side left me with no picture at all, but I just applied the tape on the right side and it worked.
My tape was a bit thicker than yours and maybe covered up too many pins and left me with small black strip on the right, no flickering though.. cutting the tape in half width ways seemed to do it, smaller than that left me with horizontal lines.. anyway thanks for the solution dude
Worked for me - took several attempts to get the right pins covered but definitely worked - THANK YOU
how to find the right pin????
@@risvymahi3118 Trial and error!
Worked perfectly! Thank you so much for making this video
Stupidly easy fix for an even stupider issue, this worked for me too! Cut some tape in half and covered ten pins from the right on the right strap and it worked!
I have a UE65KU6680.
For that TV, each disconnected connector makes the screen blank. I chose the top connector (same wire as the right one).
After about ten contacts (from the top of the connector), I isolated the about next ten contacts with a piece of tape sticked on the wire.
I didn't count accurately and probably got lucky because that totally solved the flickering issue.
Thanks a lot, my TV is happy.
I would like to know HOW electronically these deconnections resolve the subject. Often a problem is created by lost contacts but here it's the oposite.
Please explain it to me !
.
actually the problem comes from the tab cof of the panel ,so to resolve this issue we disconnected the signal ( feed back) from ckv pins to ic controller .
Thank you, because I don't like to manipulate without understanding. Now I feel a little less stupid.
Thank you so much. I was about to bin my Samsung and your fix worked with some trial and error. I can now watch the football later today.
Awesome! This solution works perfectly. 😂😂 I must say it was a haslet trying to open my TV. But it paid off. I would have spent so much money for a repair service. Thanks man
Hi Ian also having trouble trying to open TV, what did you use to get the screews out
Thanks Sir, i tried it and it worked wonders...big thanks to you and wishing you the best in your future endeavors
Thank for the video it helped me out.. all i had to do was flip the scripts now my tv is working fine....i really appreciate you
Wdym flip the scripts?
TYSM THIS WORKED AFTER MULTIPLE TRIES (FIRST TIMES LEFT HALF FLICKERING)
This helped me alot tnx alot you saved me you just a new subscriber (hisense vidaa smart tv)55inches
I have a Sony led with this issue but my tcon ribbons don't isolate left or right half of screen. Should I be focusing on the CKV points? I have CKV 1 - 4 and CKVB 1 - 4.
Had to guess on mine, but I used some scotch tape to cover pins 10-20 on the right strip, and my screen flickering is now gone! Samsung un50mu6300f
yeah mine too. Samsung are awful quality.
This worked to solve the initial jumping display but drastically reduced the color output on the left side. I replaced the Tcon cables on both sides and the jumping issue returned so I put the taped cable back.
The question would be what pins are really the culprit? Are there pins I can leave uncovered that will fix the color issue without reintroducing the jumping issue?
Amazing, thanks for this. Can't believe it worked! Would like to know what exactly covering the pins has done - what has it disabled?
it's ckv signals
Seemed wayyy to good to be true. I cannot believe this actually worked! I cannot thank you enough! Worked on my 2018 LCD
Thank you bro, I fix my father's TV in less than 30min, cheers
Solved! Thank you , it worked. I have seen many similar clips, but only in this one is a Samsung model like mine. The problem for me was on the left plug. I succeeded the first time with a wide size but I wanted to reduce it to 3 pins. The problem reappeared but not as obvious as the first time. I came back with the wide size and it works. What changes did I make to remove these pins? What differences should I notice on the display?
no need to remove the pins just use a tape to isolate it , no difference.
happy for you 😊
Quick question... how many pins are covered with the adhesive tape? Thanks.
10 pins
Samsung UE50NU7400
worked for me! My screen was all black when i unplugged a cable, covered the same cable from pin 11 to 24 inclusive.
Hope the problem does not start again, THANKS A LOT! Grazie 1000 sei grande!
Worked for me! much appreciated! Your video has really helped fix my tv it wasn’t bs!
I was curious why does this work? are we fixing a short?
I'm not sure why but that actually worked, my tv was flickering, I put some tape on the damaged ribbon and that's it... Thanks!!
happy for you 😊
is your tv still alive? my tv started flickering up and down about a day ago and i want to do this but idk how it will work out in the long run
@@AIZRN i did this not too long ago and it works perfectly fine
Worked perfectly for me, again the problem started .. what to do
Easy fix!!! Thank you!!!!
Glad it helped!
It works!!!!!! Yehey. Wow. It's like magic in our tv Thank you. ❤❤❤❤
Thanks master. But what was the reason of this problem such that putting a tap fixes it?
worked like a charm! thankful for this video! you saved my TV. on to buy new sneakers instead 😂
I factory resetted my smart samsung tv and it worked also to fix wifi not connecting just turn off your wifi for 30s and turn it back on. I wasted 200 dollars for delivery and a repair shop that's highly rated couldn't even fix this problem and they had a month to fix it.
Unreal - honestly thanks to this legend for posting this video.
Also, my fix was to cover the left ribbon - 10pins from the left. Took me 5 go’s but it works!!!
Hey man i tried your technique, it works but I still have a difference between the two sides (mostly with colours) any ideas? Thanks
(Modifications) Okay i tried again but with the tape at 2 and not 10 wich i saw on another video and it worked perfectly lol thanks man this is so usefull !
Mixed results on my 50 inch Samsung UN50NU6900. Less flickering but still twitches, I will let it run for a few hours to see if it worsens. I have to redo the tape and zoom some pics to make sure I covered all the right pins 11-20. This really seems to get worse as temperature increases and, as an electronics engineer, I am tempted to reflow the board as a last resort to see if that fixes it. What signals are present in those blocked pins 11-20, please ? I would like to understand WHY we are blocking those pins. Thank you.
currently having this same issue. Tried common fixes but doesn't fix issue. Im gonna try your fix and hope it will work.
Tbarkellah 3lik...... I fixed my problem using your hint! it works perfect thanks a lot!
How many pins should the tape cover? Or is that irrelevant?
I have a 50inch Series 7 doing the same thing (UE50RU7400UXXU). Watching the video you said to cover from pin 11. In the comments you said 11 up to 20 should be covered. In the video I paused at the close up and counted the pins but that wasn't what you covered. You seemed to cover pins 12 or 13 all the way up to pin 30. Can you explain If I should follow video or comments.
That's what I noticed too. I've tried many different pin combos without success. The picture changes sometimes, but not for the better.
It takes patience and trial & error. A piece of tape roughly 2/8"‐3/8" thick worked for me. In rhe video his tape is on the right side of the right cable. For me, I had to put it on the left side of the left cable (they were opposites). If you put the tape in the wrong spot, regardless of the size of tape, you will get all black, half black, a black bar, or plaid (my wife thought that was hilarious). If you can get the black bar or black half, watch the screen for a few minutes. If the flickering resumes, then you should have the correct cable but wrong pins. If you don't see the flickering when half the screen is blacked out, you taped the wrong cable. Again, if it is the left cable, count 10-12 pins in from the left edge; if it is the right cable, count 10-12 pins in from the right edge.
Hope that helps anyone.
omg thank you man I was close to giving up, read your reply carefully and I knew I was on the right path. Swapped the tape to right side of right cable, pins 12-30 roughly and it worked! Thank you my guy
Worked for me too! Had to cut the tape in half so it didn’t cover as many pins, thank you very much that’s saved us a lot of money 🙏
Thank tou so much my friend you fix my tv,thanks for your help,keep up the good work and the help you provide...!!!!
you're welcome 😉
I can't exactly understand if you mean to cover 10 lines with tape, or put tape after the 10th line. I'll try to do it tonight and hopefully it'll work!
yes put the tape after 10th line
Wow! Thank you it worked. Maybe i need to cover more pins with tape... flickering has completely stopped, but i have a 1cm wide vertical black line on the left of the screen
cover just 9 or 10 pin
@@repoapps hey thanks for trying to help get rid of the line, I tried leaving the 1st 9, 10, 11 & 12 pins exposed and the line is still there. Gonna put the back on... unless there's anything else I can try. Ps. I'm using 4mm wide tape
THANK YOU!!!! WORKED GREAT AFTER I TAPED IT! SAVED ME HUNDREDS OF DOLLARS
Happy for you 😉
Thanks for the video, I tried the trick and it worked for the flickering (right band was damaged) but now I have a vertical black line on the left outer part of the screen. Do you know what I can do about it ?
you need to make the tape smaller and block less pins
Yes this worked for me too! Tape less pins!! Thank you 🙏
What’s the purpose of the tape? How many pins over any how many pins should the tape cover? Do you look for a visibly bad pin? I could seem to figure out how to determine this.
delicate tape , 10 pin to cover ,
no this pins are the feedback to controller ic so you must disconnect them .
@@repoapps so, cover the 10th pin? how many pins in total can you cover? or the width of the tape?
I think I used tape too thick, it removed the picture jumping problem great, but with the tape I used I also lost a small strip of picture on the far right, will try to reduce the tape width..
I'm scared if I did it and messed up than my mom will kill me
This is for technicans.if you decide to diy then becareful an prepare an large table
@@smsgamer8583 we gave it so someone who do it , and it's all fine now
@@jeonjungkook5565 ok but I have the same problem and what country are you I need to know how much is costs
@@smsgamer8583 see if any local can do it in your area and if they have any experience, it will ALOT cheaper
@@jeonjungkook5565 oh ok I live in malaysia
Hi Friend, first of all congratulations for the video. I wanted to ask you for help: I have a problem with my Samsung LE40B530P7WX TV because it has horizontal stripes. I did several tests but nothing. Could you tell me which are the PINs that I have to block with the tape, I can not understand which is the trace of the signal (VCOM, CLKN, CLKP, CPV, STV, VGM ....) that is causing the problem. A thousand thanks.
If disabling it with tape can help solved problem then what is the puprose of those pins in the first place?
OMG, can't believe this worked on the 1st try and I winged it as well, thanks lol
Hello, I'm tempt to try that tutorial, but my symptom isn't a double line flickering like yours. I'm getting a snow dots rectangle flickering blink, like 5 cm on the right. Would covering the 'CKV' like also be the solution ?
Thank you so much it’s wonderful and it’s working.⭐️⭐️⭐️⭐️⭐️
One question?! ⚠️🛑🛑
With that method i will miss some features or quality of the picture ?
no , happy for you 😉
This worked perfectly! Thank you so much!
Thank you! I thought i had to replace my tv and now i dont have to 😀
This was a massive help. Thanks a lot
I tried this and it does work but in my case my mid screen goes dark and the extreme left corners seems to have motion blur.. please help
Thank you for the video! It's fixed the issues however i can't seem to get the color to correctly work now. It's fades the color out now from left to right. Might be time for a new tv. Thank you though
just cover 10pins if you cover more then that the picture may be not correct
Thankx bro I just fixed my shit , you help me save hella money gang
8:37 if i calculate correct you i see the first 12 golden are left out and then 17 golden pins are taped after wards?
Dude, with all due respect......brother.......put the camera on a tripod or duct tape it to your head. Use both hands friend.
I don't get it. You've coverd a bunch of pis randomly starting with pin 11? What is the logic behind it?
yes , we must disconnect the ckv pin from board , the ckv pin start from 11pin to 22 pin .
@@repoapps is this work for all samsung tv or you need to check for different model?
the new model also the 4k panel
This worked for me, I disconnected those 2 strips trying to trouble shoot which side was bad and the screen wouldn’t illuminate if only 1 was connected so I reconnected both sides and the double-vision flickering went away, I guess they just needed to be re-seated
if blocking the CKV pin for one side, does it mean the t-con board is actually malfunctioning? would replacing it be another option ?
no , not the t-con , problem comes from panel