I have a Vizio 65" and with your video i fixed my TV. It took me a wile to figure it out, my TV had a pin problem on the right side of the screen so looking at the Board from behind was the left strip cable just like the video. I cut a piece of tape and the size covered about 4 pins but i started to notice some horizontal lines so i used a volt tester and found the lowest number on the 6th pin from left to right. I cut the tape to just cover 1 pin and worked perfectly. Thanks and hope this helps others, don't know how long it will work but its a start. Will make a video of my problem fixed soon
Thank you so much. I'm just a middle aged divorced lady. Who would normally ask a man to do this for me. But with your help I was able to do it on my own. Thank you...Thank you!
I just applied this fix to my LA40D550 which had a stationary, doubled image. First place I tried it worked on the double image but the affected side was dimmer than the good side, so I reduced the size of my tape to about 3mm, and (after a few guess and checks) more precisely blocked the problematic trace/s, this restored the whole image to its normal condition. Hooray! Thanks!
Thank you! This helped me fix my Samsung I got for free. I have ZERO electronic experience aside from tearing into ssshhhhhhh…shtuff…. When I was a little kid. Didn’t even get it put back together most of the time. On a side note if your screen has a touch button row on the bottom of the tv be extra careful on how things line up when you screw it all back together. The tv works though so thank you very much for sharing your knowledge and not trolling the internet like so many people do these days
Thank you very much for making this video,this video was very helpful when we called the technician he said that there was a problem in the display and we would have to replace the display which would cost around 20 thousand Rupees,so we looked up on RUclips and found ur video this was very helpful. Thank You once again.
It worked.....double image fixed as mentioned in the comments, just need to move the tape around and resize to get it 100%. 1st attempt it fixed the double image but was getting right side darker, so moved the 3mm width tape at different points and ta tadaaaaaa....worked. Thanks so much you was very helpful.
Wow I was just about to take it to the rubbish tip but tried this and it worked. I put the celotape in a random place for the left side and it worked first time.
Thank you so much. Your video not only help me to repair own in 1st attempt and save lot of money. Please make such videos of possible of other common problem.
Good Morning I have samsung 70" or 80" flat screen TV with a double image. Just like the you shown on your RUclips video 📹. I'm calling from Houston TX my name is Michael
the T con boardgenerates the noise disturbance signals , by using the tape we are masking off the noise signals , the board can be changed with a good new spare to eliminate this error...
My Samsung LED TV started doing this the other day and used this fix. Cant thank you enough it rearly works. My only problem was that I tried the right chanel and that did nothing but tried the left and first time didnt work but moved the tapes and it has worked brilliantly. Has anybody got any idea how long the fix will work for?
This works for me. Thank you so much. My wife can now watch Netflix again. @everyone, just curious, because of the tape blocking certain signal/s, will there be another possible display issue? Like, problems with other video display source such as AV, VGA, HDMIs or component?
The Screen side where thr tape is pasted you will find thre will be slight loss of pixels and when you connect the TV audio with amp or home theter there will be intermittent noise screen will go blamk and resume , smtime when i connect my lapop HDMI out to TV i audio will not come in my TV , i have to connect and reconnect the HDMI cable. these problems you might face or you may not. I din face this problem at first but after 3 years am facing this problm. But image jumping problem never came back.. it got solved
the vertical line is caused by the LCD array defect or the cable seating problem , To fix this, simply reseat the cables and ensure that they're securely connected and it cant be rectified
Sir I have similar issue in my vu 43 inch 4k android tv. I have checked it the problem is coming from the right side of the display. I have 3 questions. Is it a tcon board problem or is it a display/panel problem? How many pins I have to block? Will it anyhow effect my 4k hdr picture quality?
Hi sir, am glad to respond for your queries , Ans Q1: If there is a problem in TCON board you wont get any picture or image , , as you mentioned the problem is with the right side of the panel , i feel that signal going to the right side of the panel from the TCON has to be checked, as explained in my vide , try masking the right side strip cable and check. Ans Q2: You can mask 3 pins from left , leaving the first 2 pins , do not mask the 2 pins on the left or on the right . leave off the 2 pins from left and mask the next 3 pins and check , similarly ckeck on the right side pins by leaving the right most 2 pins , Ans Q3 : Yes slightly there will be slight HD variations on the screen as horizontal lines will slightly visible on the right side of the display panel but it wont be a problem while viewing and viewing comfort will not be affected.. HD quality wont be affected much .
@@mysticroads can I contact you through insta. I will share some image of the board and a short video about the problem of double image. There are two (60pin) connector from the tcon board to the display. As I have told you that the problem is coming from the right side. I have seen your video you are blocking some particular section / signal going through the display to the tcon board. In my case it's little bit different. I will try your method but it will be more helpfull if you can advise me after watching the picture of my tcon board. Anyway Thanks for the reply.
Yes... It's absolutely fine.. you will notice a mild picture resolution clarity variation on the left or right side if the screen.. I ve been using my tv with the tape past 2.5 years it's working fine
When I add the tape it fixes the double image but it adds a red line in the screen. The red line wasn’t there before only when I add the tape. Any suggestions??
i dont mean to be so off topic but does any of you know a tool to log back into an Instagram account..? I was dumb lost my password. I would love any assistance you can offer me.
@Walker Miller thanks so much for your reply. I found the site through google and I'm waiting for the hacking stuff atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
I previously fixed screen flickering with putting such tape at right side. Now I have issue with double image again. If the probkem detected in anothrr side, can I put tape on that side also. Please advise.
Hi Anna, i have tried this i have unlatch the right side but total screen showing black , and tried another side but same. Then how would I know which side i have to put tape?
hi bro the unlatched right portion will be black only as the video signal is removed , u check the other side if any jumping or doubling issue , then latch the right side and unlatch the left side and check again , by this way u can check which side the err or is.
Understood. But if I unlatch any of side complete screen getting black.. But anyways I guessed the side and place the tape. It's working now.. 100% Thank you very much.
They may charge minimum of 75$ ~ 125$ , depending upon the defect, if they intend to replace the Tcon Board then the board cost will add up another 50/70$ i presume.
I have got like this problem in my sony LCD tv.. I saw many videos for how to resolve it.. Many doing cutting removal of ckv signal and something.. You are doing different way.. Is tat different problem??
@Basil Ke ok sir, thanks for ur reply. And one more question is whether i can go for repair or not because service persons not giving assurance for long run of tv after getting resolved by cutting method.. If the problem is resolved what will be the life for it? Can u tell the period?
Hi Lina , In your case I feel that the T CON CONTROL BOARD will be faulty , from TCON board there will be 3 connectors one input and 2 output for the right half and left half of the screen , try disconnecting one side either left or right...and check which side you get image and which side is becoming blackout
Hi, I'm a ten year old boy and I faced this problem today and I get confused at 2:42 and my mom would probably not let me do this and we don't have screw drivers and she probably would put do this either so I don't know what to do but my bb brother kept throwing his toys at the screen so I think thats one of the problems Idk what to do but if you could try to explain it to me I would be very happy and try:)
I have a Vizio 65" and with your video i fixed my TV. It took me a wile to figure it out, my TV had a pin problem on the right side of the screen so looking at the Board from behind was the left strip cable just like the video. I cut a piece of tape and the size covered about 4 pins but i started to notice some horizontal lines so i used a volt tester and found the lowest number on the 6th pin from left to right. I cut the tape to just cover 1 pin and worked perfectly. Thanks and hope this helps others, don't know how long it will work but its a start. Will make a video of my problem fixed soon
thats nice to hear ...
Thank you so much. I'm just a middle aged divorced lady. Who would normally ask a man to do this for me. But with your help I was able to do it on my own. Thank you...Thank you!
Wovv 👍👍👍 great to hear that from you
Hi
Thank you so much for making this video, I have almost zero electronics experience and just fixed my TV in 10 minutes!
Thank you soo much for your comments ... please subscribe to my channel
I just applied this fix to my LA40D550 which had a stationary, doubled image. First place I tried it worked on the double image but the affected side was dimmer than the good side, so I reduced the size of my tape to about 3mm, and (after a few guess and checks) more precisely blocked the problematic trace/s, this restored the whole image to its normal condition. Hooray! Thanks!
Thank you soo much for your comments ..lad to know that you have solved the issue ... please subscribe to my channel
Is the tv still working well?
@@SOPHOCLESIFY Yes
Tu peux m'aider?
This worked like a charm. And it saved me from having to buy a new TV. Thanks!
Thanks for taking time to inform us Samsung TV owners (Which I believe provides the most lifelike picture) of these potential fixes.
thank you
Thank you! This helped me fix my Samsung I got for free. I have ZERO electronic experience aside from tearing into ssshhhhhhh…shtuff…. When I was a little kid. Didn’t even get it put back together most of the time. On a side note if your screen has a touch button row on the bottom of the tv be extra careful on how things line up when you screw it all back together. The tv works though so thank you very much for sharing your knowledge and not trolling the internet like so many people do these days
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
Thank you for this video , it saved me a lot of money , I fixed my samsung led tv myself 🙂 , it took around an hour for the hole process
just fixed my Samsung tv with this, i thought i was going to have to throw it out, thank you
thats nice to hear , thank you
It worked on my Samsung TV. I fixed it in 15 minutes. Thank you.
Thats great to hear..
Thank you very much for making this video,this video was very helpful when we called the technician he said that there was a problem in the display and we would have to replace the display which would cost around 20 thousand Rupees,so we looked up on RUclips and found ur video this was very helpful.
Thank You once again.
Am really glad that you did it 😌👍👌👌
It worked.....double image fixed as mentioned in the comments, just need to move the tape around and resize to get it 100%. 1st attempt it fixed the double image but was getting right side darker, so moved the 3mm width tape at different points and ta tadaaaaaa....worked. Thanks so much you was very helpful.
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
This man earned this sub. Ty for posting this fix
thank u soo much
Dear Sir, thank you from Montréal, Canada. Just follow your steps and my tv is fixed!
Thank u martin , am glad ur tv is fixed..
Wow I was just about to take it to the rubbish tip but tried this and it worked. I put the celotape in a random place for the left side and it worked first time.
wovv thats nice to hear
Excellent trick. Sir thank you so much. With the help of your video i fixed my tv..
Thank you , am glad ur tv is fixed....
Thank you so much. Your video not only help me to repair own in 1st attempt and save lot of money. Please make such videos of possible of other common problem.
Wovv that's great and nice to hear.... Thank you soo much for ur comments... Sure I ll make such useful videos
Tu peux m'aider?
Thank you very much for this informative video. I had a similar problem, and I could fix my Samsung LED FULL HD TV under 15 minutes.
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
Thanks man, my TV is now ready for ten more years 💪
Great to hear that 😊
Hi thank u so much I resolve the problem of my Thomson tv with your method. It was so easy . Happy new year !!!
am glad ur tv is fixed.. happy new year to u tooo
Good Morning I have samsung 70" or 80" flat screen TV with a double image. Just like the you shown on your RUclips video 📹. I'm calling from Houston TX my name is Michael
you can check my video ,, and troubleshoot
tq sir. very good. in english.
thank u
Hi just wanted to ask is it that board that needs changing. As you should be able to make the connection without the tape normally ?
the T con boardgenerates the noise disturbance signals , by using the tape we are masking off the noise signals , the board can be changed with a good new spare to eliminate this error...
It worked... Thank you 🤩
thats nice to hear
I tried this and it worked
Thanks for the info.
Thank nice to hear from you...
What pins did you tape? Do you tape different pins if it's a 50 inch screen? Maybe pins 13 to 25?
Look out for Vg pin track on the PCB , mask those pins
Thank you I'll give it a try
Very nice sir
thank you soo much
Bro, it really worked. Thanks for the solution 🙂
Nice to hear from you .. that it worked ... Please subscribe to my youtube channel, thank you for you support... 👍🎉
My Samsung LED TV started doing this the other day and used this fix. Cant thank you enough it rearly works. My only problem was that I tried the right chanel and that did nothing but tried the left and first time didnt work but moved the tapes and it has worked brilliantly. Has anybody got any idea how long the fix will work for?
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
Is your tv still working well?
what do you think is causing the double image flickering? do you think it might be a fault in the ribbon cable? or??
The problem is with the Tcon board or the noise signal from the video processor
Huge thanks!
thanks for ur kind words.....
This works for me. Thank you so much. My wife can now watch Netflix again.
@everyone, just curious, because of the tape blocking certain signal/s, will there be another possible display issue? Like, problems with other video display source such as AV, VGA, HDMIs or component?
The Screen side where thr tape is pasted you will find thre will be slight loss of pixels and when you connect the TV audio with amp or home theter there will be intermittent noise screen will go blamk and resume , smtime when i connect my lapop HDMI out to TV i audio will not come in my TV , i have to connect and reconnect the HDMI cable. these problems you might face or you may not. I din face this problem at first but after 3 years am facing this problm. But image jumping problem never came back.. it got solved
@@mysticroads, thank you for this answer. Luckily, I'm having no problems so far but I'll be checking other source to make sure. :)
Working ! Very good work 😇
Thank you .. we did the same steps which suggested and successfully fix the issue
thank u soo much .. am happy to hear that , please subscribe to my channel and like my videos..
Tu peux m'aider?
My samsung has 4 Tcon cables in stead of 2 like you showed. Fixed ghosting but have now got some vertical lines on the screen
the vertical line is caused by the LCD array defect or the cable seating problem , To fix this, simply reseat the cables and ensure that they're securely connected and it cant be rectified
Sir I have similar issue in my vu 43 inch 4k android tv. I have checked it the problem is coming from the right side of the display.
I have 3 questions. Is it a tcon board problem or is it a display/panel problem? How many pins I have to block? Will it anyhow effect my 4k hdr picture quality?
Hi sir, am glad to respond for your queries , Ans Q1: If there is a problem in TCON board you wont get any picture or image , , as you mentioned the problem is with the right side of the panel , i feel that signal going to the right side of the panel from the TCON has to be checked, as explained in my vide , try masking the right side strip cable and check. Ans Q2: You can mask 3 pins from left , leaving the first 2 pins , do not mask the 2 pins on the left or on the right . leave off the 2 pins from left and mask the next 3 pins and check , similarly ckeck on the right side pins by leaving the right most 2 pins , Ans Q3 : Yes slightly there will be slight HD variations on the screen as horizontal lines will slightly visible on the right side of the display panel but it wont be a problem while viewing and viewing comfort will not be affected.. HD quality wont be affected much .
@@mysticroads can I contact you through insta. I will share some image of the board and a short video about the problem of double image. There are two (60pin) connector from the tcon board to the display. As I have told you that the problem is coming from the right side. I have seen your video you are blocking some particular section / signal going through the display to the tcon board. In my case it's little bit different. I will try your method but it will be more helpfull if you can advise me after watching the picture of my tcon board. Anyway Thanks for the reply.
Is this technique suitable for TCL.tv
hello sir, does it have impact on any other parts like display circuit or smart board? is it completely ok to use it with the tape long term?
Yes... It's absolutely fine.. you will notice a mild picture resolution clarity variation on the left or right side if the screen.. I ve been using my tv with the tape past 2.5 years it's working fine
You are the best 😄
Thank You soo much, please give a like to my video and subscribe to my youtube channel
Thank you
Thank you so much..i was able to.fix my tv..
welcome .. am glad
Thank you soo much for your comments ... please subscribe to my channel
how did you get the spot so quickly ?
where do i put the tape on tcon
Great! Thank you for help us.
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
Good information.
Thnx sir
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
It worked 😀👍 thank you!!!
great.. am glad that my video helped u...
thanks!
Awesome video.. I fixed my TV issue
Thank you bro
Thank you soo much for your comments ... please subscribe to my channel
Great job
thank you bro
When I add the tape it fixes the double image but it adds a red line in the screen. The red line wasn’t there before only when I add the tape. Any suggestions??
try to reduce the width of the tape , and shift the position of the tape , moving towards left and right
Please my tv is hisense 49m5600cw but doesn’t have a t con just the flex cables going directly to the screen panel
you have to check the VGA board present in the rear side of the panel
Dear Sir, you’re a hero.
thank u sir
Thank you my man
thank u soo much .. am happy to hear that , please subscribe to my channel and like my videos..
What a trick master ! Good job.
Thank you bro
i dont mean to be so off topic but does any of you know a tool to log back into an Instagram account..?
I was dumb lost my password. I would love any assistance you can offer me.
@Issac Ray instablaster :)
@Walker Miller thanks so much for your reply. I found the site through google and I'm waiting for the hacking stuff atm.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Walker Miller It did the trick and I finally got access to my account again. I'm so happy!
Thank you so much you saved my account !
I previously fixed screen flickering with putting such tape at right side.
Now I have issue with double image again. If the probkem detected in anothrr side, can I put tape on that side also. Please advise.
Yes you can give a try fixing tape on the other side too
@@mysticroads Actually I send it to a repair shop before trying this, they are saying me to replace led panel!
@@atmnurulanwar Just give a try you and try ur luck , it will get definitely solved
Tq bro I have solve my tv problem
good bro...
Thank you soo much for your comments ... please subscribe to my channel
Great explanation..
thank u soo much
Thank you soo much for your comments ... please subscribe to my channel
Hai sir, how this problem permanently rectified ? Need to replace the t con board or any other component?
i used cello tape and its working fine more than a year
when there is no image or more distortion , i recommend to replace the tcon board
Hi Anna, i have tried this i have unlatch the right side but total screen showing black , and tried another side but same.
Then how would I know which side i have to put tape?
hi bro the unlatched right portion will be black only as the video signal is removed , u check the other side if any jumping or doubling issue , then latch the right side and unlatch the left side and check again , by this way u can check which side the err
or is.
Understood. But if I unlatch any of side complete screen getting black..
But anyways I guessed the side and place the tape. It's working now.. 100%
Thank you very much.
Hi my tcon control board has single connection only.. tv is videocon led
kapton tape lasts longer than regular tape.
Bro but one thing i want to know
Actually what signals are u have block for this
It's LVDS signals
Thank you so much
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
what is its cost to repair
Zero cost , just a small piece of cello tape
Nice, thanks sir.
thank u
Please subscribe to my channel
tq for this video..
Thank you soo much for your comments ... please subscribe to my channel
Sir will our tv get double image if we are using fire stick for 2 to 3 yrs
i dont think it will be an issue
How much money can give to that work in repair shop
They may charge minimum of 75$ ~ 125$ , depending upon the defect, if they intend to replace the Tcon Board then the board cost will add up another 50/70$ i presume.
How many pin to block.
3-4 pins
Nice video in English
Thanks
Thank you bro
Thank you soo much for your comments ... please subscribe to my channel
Thanks it's workkk!!!!
Great to hear from u
What if both side is not good? Can I still use the tape?
Yes you can give a try... It may work 👍👍👍
I have got like this problem in my sony LCD tv.. I saw many videos for how to resolve it.. Many doing cutting removal of ckv signal and something.. You are doing different way.. Is tat different problem??
@Basil Ke ok sir, thanks for ur reply. And one more question is whether i can go for repair or not because service persons not giving assurance for long run of tv after getting resolved by cutting method..
If the problem is resolved what will be the life for it? Can u tell the period?
@Basil Ke Thank you so much sir.
Now my left side either complete black or complete white what shall i do?
the T con board has to be replaces , i think it has turned defective
Witch board having a issue?
T CON Board
Thanks for cooking this video
Same model.maY problem is vertical line. And ill try you methods not work
U may check to replace the T CON Boardd
How to find the position correctly and how to get the correct size of the tape, 5mm or 3mm which one is correct....
Its a trail and error method , try using 3 mm tape at diff positions , to be precise start from let side
Hi, may i know what kind of tape you are using?
my Tv model is Samsung UA40EH5000R 40 inch LED Full HD TV, same issue double image problem
i used a normal cellophane tape
@@mysticroads i see. Alright. Can't wait to try it. Hopefully can solve my problem. Thanks for the sharing 🙏🙏🙏
thank you for this
thank u bro .. for ur comments
You're very welcome!
Hi, i did that technic but is still flickering time to time … any advice?
Try wit 3mm width tape at diff positions bro... You can definitely mask off the bad signals
Hello i have the same problem but when I disconnect one side, any side the whole screen turns dark, do you know what to do in that case?
Hi Lina , In your case I feel that the T CON CONTROL BOARD will be faulty , from TCON board there will be 3 connectors one input and 2 output for the right half and left half of the screen , try disconnecting one side either left or right...and check which side you get image and which side is becoming blackout
@@mysticroads Hello, thanks for your reply, i tried that, however if I disconnect either side of the TCON board, the screen goes dark again.
Thank you sooo much
you are welcome bro
Thank you soo much for your comments ... please subscribe to my channel
Legend
My screen becomes black when i remove 1 cable..
Tanq sir
ur welcome
Can I just replace the connectors?
there is no problem in the connectors , the problem is with the noise/error signals emerging from the TCON board
Sir ,one side line disconnected..then tv showing one side black color and othe side same flickering image..what to do sir
provide tape on the other connector as i have shown in the video, as the problem is with that connector only
@@mysticroads thanks sir......
I have Sony TV can i do the same with Sony, will it work? How many how to find the correct position to mask....
Just past the mask on the position from left
Bro same problem in my Videocon led tv bro what to do please help me bro
open the rear cover of ur tv and follow the process ans explained in my video.
Hi can you tell what was actual fault.
doubling Image and jumping image
Super
Thank you bro
Thank you soo much for your comments ... please subscribe to my channel
Hi, I'm a ten year old boy and I faced this problem today and I get confused at 2:42 and my mom would probably not let me do this and we don't have screw drivers and she probably would put do this either so I don't know what to do but my bb brother kept throwing his toys at the screen so I think thats one of the problems Idk what to do but if you could try to explain it to me I would be very happy and try:)
bro, channel running in our Tamil channel but y don't speak in our Tamil language to guide its easy to understand for everybody
Will do bro...thank you for your kind suggestion... நன்றி நண்பா ❤️🙏👍
I tried to do so now my tv is completely black😂
thats great to gear .. you rock