Thank you so much man, so many garbage content creators on here with flashy stuff not really helping anyone at all and here I find one by a guy who knows what he is doing. This saved my bootable flash drive so I could install linux OS on my chromebook.
when i type clean this is what i receive "DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information."
i cannot stress enough how much this saved me money i have had 3 previously unusable usb and sd cards due to this and i have now succesfully made all of the usuable again saved me a lot. thank you good sir. i subbed
Hi its giving me DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information. error
i tried this but theres an error stating "DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information." what should i do about it?
This link may help www.easeus.com/resource/io-device-error.html also try using the rear i/o instead of the front if that is the case. see if your drive has a physical read/write lock on it self.
DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information. This pop out after I clean it
I tried alot and didn't work, Under the "Fs" column My Pendrive is labeled "RAW" and "Status" is "Healthy".When I clean or format the drive CMD gives a Response like: "DiskPart has encountered an error: A device which does not exist was specified. See the System Event Log for more information."
This is what I got after DISKPART> clean DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information.
my sandisk cruzer glide 16GB suddenly "write protected" cannot format and checkdisk. only can read,not write anymore ,so bad sandisk quality!!! easeUS software also cannot format it!!! H:\>format H: Insert new disk for drive H: and press ENTER when ready... The type of the file system is NTFS. Verifying 14.3 GB Cannot format. This volume is write protected. Format failed.
What if I am trying to delete what is on the laptop? What seems to be locked. Or even the operating system because couldn't I just reinstall a new operating system?
i got to the last step and when labeling the next screen appears is crosoft DiskPart version 10.0.17134.1 ACTIVE - Mark the selected partition as active. ADD - Add a mirror to a simple volume. ASSIGN - Assign a drive letter or mount point to the selected volume. ATTRIBUTES - Manipulate volume or disk attributes. ATTACH - Attaches a virtual disk file. AUTOMOUNT - Enable and disable automatic mounting of basic volumes. BREAK - Break a mirror set. CLEAN - Clear the configuration information, or all information, off the disk. COMPACT - Attempts to reduce the physical size of the file. CONVERT - Convert between different disk formats. CREATE - Create a volume, partition or virtual disk. DELETE - Delete an object. DETAIL - Provide details about an object. DETACH - Detaches a virtual disk file. EXIT - Exit DiskPart. EXTEND - Extend a volume. EXPAND - Expands the maximum size available on a virtual disk. FILESYSTEMS - Display current and supported file systems on the volume. FORMAT - Format the volume or partition. GPT - Assign attributes to the selected GPT partition. HELP - Display a list of commands. IMPORT - Import a disk group. INACTIVE - Mark the selected partition as inactive. LIST - Display a list of objects. MERGE - Merges a child disk with its parents. ONLINE - Online an object that is currently marked as offline. OFFLINE - Offline an object that is currently marked as online. RECOVER - Refreshes the state of all disks in the selected pack. Attempts recovery on disks in the invalid pack, and resynchronizes mirrored volumes and RAID5 volumes that have stale plex or parity data. REM - Does nothing. This is used to comment scripts. REMOVE - Remove a drive letter or mount point assignment. REPAIR - Repair a RAID-5 volume with a failed member. RESCAN - Rescan the computer looking for disks and volumes. RETAIN - Place a retained partition under a simple volume. SAN - Display or set the SAN policy for the currently booted OS. SELECT - Shift the focus to an object. SETID - Change the partition type. SHRINK - Reduce the size of the selected volume. UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or master boot record (MBR) signature of a disk. help!
Hi its giving me DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information. error
@@kareemosama785 It's been a year since that I've abandoned the usb drive and used new ones, I recommend you throw that usb drive in the trash and buy a new one if you got important data on it I cant help.
man i just spent the last 4 and a half hours trying to clear my flash drive thank you so much this was so helpful
Thank you so much man, so many garbage content creators on here with flashy stuff not really helping anyone at all and here I find one by a guy who knows what he is doing. This saved my bootable flash drive so I could install linux OS on my chromebook.
when i type clean this is what i receive "DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information."
Same here... 😭
Same
i cannot stress enough how much this saved me money i have had 3 previously unusable usb and sd cards due to this and i have now succesfully made all of the usuable again saved me a lot. thank you good sir. i subbed
Hi its giving me DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information. error
I have the same error (( did you find solution ?
@@nabiismayilov2860 did you find a solution?
same for me
Thank you very much. This worked 100% from all the others I’ve tried.
Thank you so much Brother
I tried the whole method but it didn't work for me... it encountered an error
Thanks man, very informative. Very helpful. :)
Its working successfully.great man great efforts.thank you so much for this help.
You are a real boss
Anytime. I'm trying to get back into it.
Wow!! You are really a genius.
Thank you so much!
Virtual Disk Service error:
Clean is not allowed on the disk containing the current boot,
system, pagefile, crashdump or hibernation volume.
🙃
i tried this but theres an error stating
"DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information."
what should i do about it?
This link may help www.easeus.com/resource/io-device-error.html also try using the rear i/o instead of the front if that is the case. see if your drive has a physical read/write lock on it self.
DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information. This pop out after I clean it
I have the same error (( did you find solution ?
@@nabiismayilov2860 Yes. Bought a new one brother :( no chance if it's corrupted. The files are still there and you can still copy it
@@iunderstandandwishtoprocee7644 hehe i like your solution
thank you bro im so thankful helped me alot man
this did not work for me, when I write the clean command it just tells me that an error happened and there is a problem in the i/o device...
I tried alot and didn't work, Under the "Fs" column My Pendrive is labeled "RAW" and "Status" is "Healthy".When I clean or format the drive CMD gives a Response like:
"DiskPart has encountered an error: A device which does not exist was specified.
See the System Event Log for more information."
Ok... you're the man. Thank you so much! ♥♥♥
Thanks,it worked very well
Excellent! Thank you.
Excellent Bro
Thanks dude! ❤️ 🤘🏾
thanks
Nothing worked still it says " The request could not be performed because of an I/O device error.
See the System Event Log for more information."
Nice job it’s work for me thank you ☺️
if cleaning is not successful what is other options?
This is what I got after
DISKPART> clean
DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information.
What will your suggestion be?
This helped, thanks!
my sandisk cruzer glide 16GB suddenly "write protected" cannot format and checkdisk. only can read,not write anymore ,so bad sandisk quality!!!
easeUS software also cannot format it!!!
H:\>format H:
Insert new disk for drive H:
and press ENTER when ready...
The type of the file system is NTFS.
Verifying 14.3 GB
Cannot format. This volume is write protected.
Format failed.
thanks but its not fix my problem. if there are any other way please suggest.
dvd not showing up in disk, but did showed up in volume, how to fix this😔
What if I am trying to delete what is on the laptop? What seems to be locked. Or even the operating system because couldn't I just reinstall a new operating system?
Didnt work for me, on a SanDisk NVME 1tb
It is still refusing .What can be the problem?
there was only one disk option, and it was my computers HD
can someone help
Need more help my flash drive isn't cleaning up
Actually starts at 6:06
How to do this with a dvd
8:08 Bro not working again diskpart has encountered an error
my disk isnt on the disk list
Bump - same here
same hear buddy
try list volume
@@sdlivin4907 yeah but how to work with volume because then clear doesn't work
Tried the steps
Nope still says its write protected
Hello I'm unable to format my pen drive
my disk didn't appear
does not work clean on my pc
is there any video for dvd rw ?
not working
i got to the last step and when labeling the next screen appears is
crosoft DiskPart version 10.0.17134.1
ACTIVE - Mark the selected partition as active.
ADD - Add a mirror to a simple volume.
ASSIGN - Assign a drive letter or mount point to the selected volume.
ATTRIBUTES - Manipulate volume or disk attributes.
ATTACH - Attaches a virtual disk file.
AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
BREAK - Break a mirror set.
CLEAN - Clear the configuration information, or all information, off the
disk.
COMPACT - Attempts to reduce the physical size of the file.
CONVERT - Convert between different disk formats.
CREATE - Create a volume, partition or virtual disk.
DELETE - Delete an object.
DETAIL - Provide details about an object.
DETACH - Detaches a virtual disk file.
EXIT - Exit DiskPart.
EXTEND - Extend a volume.
EXPAND - Expands the maximum size available on a virtual disk.
FILESYSTEMS - Display current and supported file systems on the volume.
FORMAT - Format the volume or partition.
GPT - Assign attributes to the selected GPT partition.
HELP - Display a list of commands.
IMPORT - Import a disk group.
INACTIVE - Mark the selected partition as inactive.
LIST - Display a list of objects.
MERGE - Merges a child disk with its parents.
ONLINE - Online an object that is currently marked as offline.
OFFLINE - Offline an object that is currently marked as online.
RECOVER - Refreshes the state of all disks in the selected pack.
Attempts recovery on disks in the invalid pack, and
resynchronizes mirrored volumes and RAID5 volumes
that have stale plex or parity data.
REM - Does nothing. This is used to comment scripts.
REMOVE - Remove a drive letter or mount point assignment.
REPAIR - Repair a RAID-5 volume with a failed member.
RESCAN - Rescan the computer looking for disks and volumes.
RETAIN - Place a retained partition under a simple volume.
SAN - Display or set the SAN policy for the currently booted OS.
SELECT - Shift the focus to an object.
SETID - Change the partition type.
SHRINK - Reduce the size of the selected volume.
UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
master boot record (MBR) signature of a disk.
help!
Sir, your steps are NOT clear! what is window x?
6:30
Hey does this work for dvd rw
I haven't tried
@@TJsDesk so please try
Emmanuel Chukwunonso lmao sa
this dosen't help
Thanks for loud music, very annoying did not want to see the entire video.
Hi its giving me DiskPart has encountered an error: The request could not be performed because of an I/O device error.
See the System Event Log for more information. error
I have the same error (( did you find solution ?
@@nabiismayilov2860 No I just left my usb it dosent work at all
i have the same error
@@kareemosama785 It's been a year since that I've abandoned the usb drive and used new ones, I recommend you throw that usb drive in the trash and buy a new one if you got important data on it I cant help.
@@rylanpro7303 that's exactly what happened