Lol thank you. I want to create more contents but because of the scarcity of time I couldn't get any new ones. Do you have suggestions for the channel?
Thanks for the video, it woks but could be really good if you can include how to simulate for example a sine wave. In my case i tried but without success. In any case excelent!!
Hi. Managed to get the XADC working fine in hardware. It does read the analog data in Channel Sequencer Mode. I would like to ask if you have experience on working with Xilinx System Generator. My XADC alone is in a Vivado project, while my entire control algorithm is designed in the Xilinx System Generator platform. I'm now trying to either take the XADC IP and it's code to XSG, or take the Verilog code of the control from XSG to Vivado, where I intend to edit the control project to include XADC functionality. Please let me know if you could help me with this. Been trying to work round this for months, but it keeps throwing up errors with both methods. No support was available in this matter on AMD Xilinx forums too. Please help.
Hi there, Unfortunately, I don't have any experience with System Generator. Not sure how to help you here. You can share your problem in detail via email, and we can discuss it there if I can give you any ideas. Thanks!
Hi there, Sorry it's been a while since I did this, so I don't remember. I might to revisit this sometimes and probably make another video for all questions asked on this. Thanks!
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. Thanks!
@@yogitachoudhary1670 As the video is really old so I don't remember it exactly. Could you please send me a screenshot of the errors you are getting via email?
I simulated the file and got this error after adding design.txt [Common 17-69] Command failed: Cannot extract '....../mem_init_files/design.txt' to itself'. Please help
Hello. I have a query. Right now my project works like LEDs glow from right to left as we increase the analog input to the JXADC port by 0.1 V. Is there any provision to change the 0.1 volt value? For example, I want the LEDs to glow each time 300uV increases. I'll be glad of any help provided.
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. The project link is in the description of the video. If you have any specific questions you can send me an email. Thanks!
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. The project link is in the description of the video. If you have any specific questions you can send me an email. Thanks!
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. The project link is in the description of the video. If you have any specific questions you can send me an email. Thanks!
Sorry for the delay as I didn't get notifications of the comments. It's been a while since I record this video so if you are still have any questions send me an email. Thanks!
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. Thanks!
Thank you Sara. Unfortunately I didn't use System Generator. I'll look into it and will let you know if I get any assistance. If you already have something related to your requirements and are facing problems then we can go through it together. Thanks!
I'm venturing in the same direction. My entire control is designed using SysGen. No idea how to proceed with the XADC in SysGen. Please help or post a video on this one too!
Please find the project link in the description! Thanks!
can you please help me in finding out frequency of an analog wave signal given as an external input to XADC?
Hii brother, you have created such an amazing video. Why have you stopped it?
Lol thank you. I want to create more contents but because of the scarcity of time I couldn't get any new ones. Do you have suggestions for the channel?
Thanks for this!! It was very helpful for me.
My Pleasure! Good Luck!
Thanks for the video, it woks but could be really good if you can include how to simulate for example a sine wave. In my case i tried but without success. In any case excelent!!
Thank you! Glad it helped. Yeah, it was an old tutorial. I'll try to record the updated one if I get a chance.
Hi. Managed to get the XADC working fine in hardware. It does read the analog data in Channel Sequencer Mode.
I would like to ask if you have experience on working with Xilinx System Generator.
My XADC alone is in a Vivado project, while my entire control algorithm is designed in the Xilinx System Generator platform.
I'm now trying to either take the XADC IP and it's code to XSG, or take the Verilog code of the control from XSG to Vivado, where I intend to edit the control project to include XADC functionality.
Please let me know if you could help me with this. Been trying to work round this for months, but it keeps throwing up errors with both methods. No support was available in this matter on AMD Xilinx forums too.
Please help.
Hi there,
Unfortunately, I don't have any experience with System Generator. Not sure how to help you here. You can share your problem in detail via email, and we can discuss it there if I can give you any ideas. Thanks!
@@GetitQuickly Can I have your email ID?
@@psp_online studentdummy16@gmail.com
@@GetitQuickly I've just e-mailed the files to you. Thanks!
how to do this with VHDL please
Same as Verilog. :) just the syntax difference, isn't it?
Can someone explain me if the ADC is of 12-bit how can it read 16-bit DRP input data?
Not sure about question. :-'(
How to mention the auxillary channels 6,7,14,15 in the testbench file?
Hi there,
Sorry it's been a while since I did this, so I don't remember. I might to revisit this sometimes and probably make another video for all questions asked on this. Thanks!
I am getting error after adding design.txt file.. cannot extract design.tdt file
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. Thanks!
@@GetitQuickly I am also getting the error cannot extract design.txt to itself and unable to solve it. Could you please tell how to solve this error.
@@yogitachoudhary1670 As the video is really old so I don't remember it exactly. Could you please send me a screenshot of the errors you are getting via email?
I simulated the file and got this error after adding design.txt
[Common 17-69] Command failed: Cannot extract '....../mem_init_files/design.txt' to itself'.
Please help
Maybe try copying the file manually to the respective directory!
Hello. I have a query. Right now my project works like LEDs glow from right to left as we increase the analog input to the JXADC port by 0.1 V.
Is there any provision to change the 0.1 volt value?
For example, I want the LEDs to glow each time 300uV increases.
I'll be glad of any help provided.
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. The project link is in the description of the video. If you have any specific questions you can send me an email. Thanks!
can you please help me in finding out frequency of an analog wave signal given as an external input to XADC?
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. The project link is in the description of the video. If you have any specific questions you can send me an email. Thanks!
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. The project link is in the description of the video. If you have any specific questions you can send me an email. Thanks!
Do you initialize control registers in the sim testbench??
Sorry for the delay as I didn't get notifications of the comments. It's been a while since I record this video so if you are still have any questions send me an email. Thanks!
When I am trying to add "design.txt", there's an error message occuring : "Cannot Extract design.txt to itself". Please help me solve this.
Sorry for the delay as I didn't get notifications of the comments. If you are still having problems then you can share what errors you are getting. Thanks!
You might have solved this. But make sure you checked "Copy sources into project" when you add design.txt to your project
@@elfindp7966 thanks!
@@elfindp7966 THANK YOU!!
Excellent tutorial. Have you ever implemented xadc in System Generator? Can you guide me through that please?
Thank you Sara. Unfortunately I didn't use System Generator. I'll look into it and will let you know if I get any assistance. If you already have something related to your requirements and are facing problems then we can go through it together. Thanks!
I'm venturing in the same direction. My entire control is designed using SysGen. No idea how to proceed with the XADC in SysGen. Please help or post a video on this one too!
How can I contact you sir I really need your help for a project using xadc please reply fast sir
Shot me an email at studentdummy16@gmail.com. Thanks!