Really helpful video thank you. From what I found though, the four 16mm bolts should be torqued to 40nm + 90 degree turn, and 60nm + 90 degree turn for the four 18mm bolts. That already felt very tight, so I'm impressed you managed 100nm on them! I already have the Powerflex dogbone bush but relieved to have almost no more vibration from fitting this.
The one I am getting has already had this fitted. When I test drove it I thought it was fine. Expected vibration (if you want to call it that). It's also worth getting the dogbone mount for reduced engine slop from movement between gears and when putting the car on load.
Nice install man, didn't realise poweflex was doing mounts too. Redoing my engine mount after the Revo failed badly, CTS one this time, might try powerflex when redoing the transmission one that is still Rev atm.
Thanks a lot bro!! Damn that’s well annoying mate!! Yeah I’ve only ever used powerflex, my ST was set up with the powerflex mounts and I couldn’t fault them 😎🔥
More dedication than me, have a turbo muffler delete to install but can’t brave the cold and wet weather these days, hopefully it’ll warm up soon haha. How are the yellow stuff pads? Would you recommend them as not sure wether to get them or the red stuff.
Appreciate that mate, I know the feeling mate it’s awful... if I didn’t make these videos I’d be putting these all off because of the weather, I’m just trying to be consistent 😅 the yellow stuff are awesome mate! Stop so we’ll. I’d highly recommend them over red stuff, especially if you like to put your car through its paces now and then. 🔥
@@AutoBay my rear engine mount (connected to the gearbox) gearbox side is broken. Nothing wrong with the gearbox, just it’s mount. So I have to change the whole gearbox, but I was wondering if I could just get it fabricated and if that would be a better option. 2005 Audi A3 2.0 TFSI Auto
![How these 2 small parts make your car A LOT faster! [Audi RS3]](http://i.ytimg.com/vi/TsHXHEY7Swk/mqdefault.jpg)
![How these 2 small parts make your car A LOT faster! [Audi RS3]](/img/tr.png)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Really helpful video thank you. From what I found though, the four 16mm bolts should be torqued to 40nm + 90 degree turn, and 60nm + 90 degree turn for the four 18mm bolts. That already felt very tight, so I'm impressed you managed 100nm on them! I already have the Powerflex dogbone bush but relieved to have almost no more vibration from fitting this.
The one I am getting has already had this fitted. When I test drove it I thought it was fine. Expected vibration (if you want to call it that). It's also worth getting the dogbone mount for reduced engine slop from movement between gears and when putting the car on load.
Good mod bro your videos are so good they go so fast while watching looking forword to more keep going😂😂
Thanks a lot bro!! Hahaha that’s class 🤣 time flies when you’re having fun 😜🤣🤣
Nice one mate. Another great video 😃🙌🤙
Thank you mate!! 🔥🔥
Nice install man, didn't realise poweflex was doing mounts too. Redoing my engine mount after the Revo failed badly, CTS one this time, might try powerflex when redoing the transmission one that is still Rev atm.
Thanks a lot bro!! Damn that’s well annoying mate!! Yeah I’ve only ever used powerflex, my ST was set up with the powerflex mounts and I couldn’t fault them 😎🔥
Great video 👍
Thank you David 🙏🏼
Nice video mate! I am about to install same on mine. Have you also installed the powerflex upper engine insert? If yes, did experience any vibration?
How has it been so far? I have heard people reporting that the powerflex came out after a while.
It’s been spot on, no issues at all mate
Is this a common problem as mine does the knocking it’s a manual
Yes mate this is a common fault unfortunately
More dedication than me, have a turbo muffler delete to install but can’t brave the cold and wet weather these days, hopefully it’ll warm up soon haha.
How are the yellow stuff pads? Would you recommend them as not sure wether to get them or the red stuff.
Appreciate that mate, I know the feeling mate it’s awful... if I didn’t make these videos I’d be putting these all off because of the weather, I’m just trying to be consistent 😅 the yellow stuff are awesome mate! Stop so we’ll. I’d highly recommend them over red stuff, especially if you like to put your car through its paces now and then. 🔥
I’m the same mate😂😂 nothing better then working on the motor when the suns out😅
@@redemptionx2918 exactly that mate 🤣🤣🔥🔥
Hi, I was wondering if you could have a look at my car. I have a gearbox mount problem and not sure what to do!
Hi mate what problems do you have?
@@AutoBay my rear engine mount (connected to the gearbox) gearbox side is broken. Nothing wrong with the gearbox, just it’s mount. So I have to change the whole gearbox, but I was wondering if I could just get it fabricated and if that would be a better option. 2005 Audi A3 2.0 TFSI Auto
Any idea on the part number for the bolts? And can they be bought online
Sorry pal I’m not too sure what the part number is for these bolts
You are doing great, keep it up! You could easily get more people watching with P R O M O S M!!!
Thanks a lot mate! What is PROMOSM ?