Thank you so much for sharing your methods and educating us on how to design with Silhouette. Im still new at using the software and loved this new technique.
Hi Lindsay! You can use a state shape and upload it directly to Cricut (in place of the shape of the heart). Did you have a state file you would like to use?
Simple and beautiful! Thank you!! However, my heart in 3rd design dissapears at the very last step after welding it wth the text, and I can't figure out why :(
Hi Jasmine! Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Dawn 🙂
Hello, I am following the video step by step but I noticed (at 5:59) that once you delete the letters away, you are left with a heart shape that is closed where you made the cut lines. When I delete the letters it leave me with a gap at the ends of where the cut lines were made. When I continue to follow the steps, the pieces do not weld as in your demo. Can you please help?
Hi Money! You will first want to weld the text in Love, and then weld the shape to the connected text. If you are still having trouble, please let us know! We are here to help! - Dawn
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I've been looking for a video like this. Thank you. Is there a way to do a similar process where you fill the heart red and the word "Love" a different color? Can't figure that one out.
Hey Simone! So yes, you can do this by creating a duplicate of your heart first and leaving it off to the side, then you can save it and use the "love" as a border around the heart. Hope this helps! ---Becky
@@DesignBundles I'm so sorry, I've tried what I think you are saying a few times and can't seem to figure it out. I guess this would be the best example I could find but I know this one is a bit difficult. See attached.
Hi can you please explain something. I'm creating badges and I've made my design but if I move it it's all separate pieces. So confused on how to make it one piece that I can move about and duplicate without having to do it bit by bit.
Hey Elizabeth! If you have overlapping pieces, you want to weld those together (it will combine them) and if you just need to Group them together. Both can be accomplished by selecting all the pieces of your design, right-click your mouse and choose the option you want. Hope this helps! ---Becky
Hey there! Great question. After you use the knife, you will want to click back on the cursor icon at the very top of your left-side tool bar. I also have a video that can help you change this setting. Hope this helps! ---Becky ruclips.net/video/-PBcaRAAUak/видео.html
Thank you so much for sharing your methods and educating us on how to design with Silhouette. Im still new at using the software and loved this new technique.
Thank you so much. Finally, I received my first Cameo, 4 Pro and I am lost, so much 😢 to learn. Thanks 😊
You are the best teacher! Thank you.
Ty this was extremely helpful!
Glad it helped!
Thank you 4 another great tip!
Thank you, Kay! ---Becky
Thank you so much po❤
I love this idea! I think I am going to need to do some practicing! LOL Thanks Becky!
Glad we could help, thanks for watching! 😊
Thanks, nice tutorial..👍
Am so happy to have found your videos; learning still after about 3 years~~~~
Thank you, Peggy! Learning is definitely an ongoing process! I love learning new things, especially about crafting! ---Becky
Brilliant tutorial!! Thank you so much for sharing your knowledge 😊
Thank you, Lynette! Your kind words mean so much to me! ---Becky
Best tutorial videos! Thank you!
Fabulous tutorial, Becky! You explain it and demonstrate so well and I was interested in your keyboard shortcuts which I need to learn ASAP! Thanks!
You're welcome! Thank you for watching! 😊
Great video
You make everything so easy to follow.
Hey Joyce! I'm so glad to hear that and I'm happy that you enjoy the videos. Thanks for stopping by. ---Becky
Love your content
Love your videos!!! Ive done dope creations because of your help thank you 🙏🏾
Love this video!! Very helpful!! Thank you!!
Good video thanks
Awesome!
Amazing video!!! Could you show how you do the states shapes????
Hi Lindsay! You can use a state shape and upload it directly to Cricut (in place of the shape of the heart). Did you have a state file you would like to use?
Sooo helpful!!!
Thank you so much!!!
Thank you, Nicole! ---Becky
How do I fill a heart with the words of a song but not cut out any of the letters? Thanks.
I love you t-shirt. Where do you buy them?
Hi there! Crystal gets her shirts from www.clothingshoponline.com/ - Dawn
Simple and beautiful! Thank you!! However, my heart in 3rd design dissapears at the very last step after welding it wth the text, and I can't figure out why :(
Hi Agata! Would you mind sending an email to mail@designbundles.net? We can help get this project finished with you! -Dawn
@@DesignBundles you are AMAZING!
Have basic edition.will I be able to do this
Hi Jasmine! Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Dawn 🙂
It did not work for me, maybe because I am using two different fonts. :(
Could you please tell me why my word is not welding too my heart? I’m going step by step following you.
Same
Hello, I am following the video step by step but I noticed (at 5:59) that once you delete the letters away, you are left with a heart shape that is closed where you made the cut lines. When I delete the letters it leave me with a gap at the ends of where the cut lines were made. When I continue to follow the steps, the pieces do not weld as in your demo. Can you please help?
Hi Money! You will first want to weld the text in Love, and then weld the shape to the connected text. If you are still having trouble, please let us know! We are here to help! - Dawn
How do you get the cut tool to actually cut? Are you holding down anything?
Our apologies for the delay in response and we hope you've found the answer but if you are still having any troubles, please feel free to write in to mail@designbundles.net or join us in a live chat so we can help with your next project! - Brittany
I've been looking for a video like this. Thank you. Is there a way to do a similar process where you fill the heart red and the word "Love" a different color? Can't figure that one out.
Hey Simone! So yes, you can do this by creating a duplicate of your heart first and leaving it off to the side, then you can save it and use the "love" as a border around the heart. Hope this helps! ---Becky
@@DesignBundles I'm so sorry, I've tried what I think you are saying a few times and can't seem to figure it out. I guess this would be the best example I could find but I know this one is a bit difficult. See attached.
@@DesignBundles sorry it's not letting me attach a picture.
Hi can you please explain something. I'm creating badges and I've made my design but if I move it it's all separate pieces. So confused on how to make it one piece that I can move about and duplicate without having to do it bit by bit.
Hey Elizabeth! If you have overlapping pieces, you want to weld those together (it will combine them) and if you just need to Group them together. Both can be accomplished by selecting all the pieces of your design, right-click your mouse and choose the option you want. Hope this helps! ---Becky
I don't have heart shape as option
Which version of silhouette are you using? - Brittany
If you use the knife, which button do I have to klick on after I have selected a point to cut. I hope you understand me.
Hey there! Great question. After you use the knife, you will want to click back on the cursor icon at the very top of your left-side tool bar. I also have a video that can help you change this setting. Hope this helps! ---Becky
ruclips.net/video/-PBcaRAAUak/видео.html