Love it!! To get rid of that clearance issue use some washers as spacers to make the seats tilt into the cab 2mm washer on each part will do it just fine
You can't just replace them as far as I'm aware. You'd have to have a whole new hardware setup in this truck because the extended cabs have specific retractors that are hidden behind the rear panels.
Hi, Crossfire owner here - don't laugh, they are not as bad as everyone thinks! Anyhoo, the heated element, especially on the base is notoriously weak. Just pressing your hand on the seat base to hard can tear the wires out. Just something to be aware of. The cables under the leather are too tight. There are obviously workarounds that I suggest you get your upholsterer to look at to slacken those wires off. The heated seats are pretty good when working correctly. Keep up the good work.
Idk why anyone would laugh lol, I think they’re quite comfortable for a “sporty” seat! I saw that about the heating elements. Hopefully these are ok considering how nice they are, but if they don’t work, I’ll just leave them be I suppose haha. I saw the video of the guy who repaired them, pretty gnarly job!
I did the MR2 seats in my '89 S10 very similarly. They were initially a little higher than I'd like, but after sitting in it, the position is great for resting my arm on the window sill.
Lexol is great on steering wheels! I had an auction car with a lot of grime on the wheel, and Lexol managed to remove all that grime! Definitely a great product hands down.
its crazy to think some people cant even put on there own wind shield wiper on but we are out here taking seats out of a car to put them in a different truck 😂🤘🏻
Anyone who says anything negative about it obviously doesn’t live in the real world. Things cost money and creators still need to be able to earn a living.
Very nice job. Good creative upgrades. I like the idea of the two tone. I think I would put in new black carpet then keep all the vinyl / plastic trim in the maroon color. Otherwise excited to see how it turns out. Have you decided what color you are going to paint it?
GMC Typhoon steering wheel, 2nd Gen Blazer center console, Oldsmobile Bravado Door inserts, Blazer ZR2 rear axle, Monte Carlo Wheels and, Chrysler Crossfire seats. Dang, so close to being wholly GM 😄
Hey buddy! Thats looks phenomenal! I do own 1996 S10 single cab with 4.3 V6, it's maroon, lower by 2 inch front, and 3 inch rear. 20 inch 2012 Camaro SS rims. Maybe one day, I probably will change seats to leather style. Keep up the great work!
I enjoy the 2 tone on the truck. If the Crossfire seats don’t work over time, doubt that they won’t work forever but who knows, try getting 2nd gen S-10/Blazer/Jimmy/Bravada leather seats. They may be hard to find but ik some crew cab S10s had them and don’t doubt the SUVs didn’t
on that center console, not sure what to do with the casette storage but that big open area at the front of it, modify it to have a wireless charging pad on it.
My brother was joking with me one day he said I should look for fighter jet seats to put in the S 10 considering I already set an a compact cockpit anyways lmao
Ooof.... Been wanting to add a bit of Chrysler to my old '82 El Camino since i am from a Mopar family. Just wasn't sure WHAT I would want to do... After seeing this, maybe I might start looking for some Crossfire seats! Gotta say, it'd be a very nice upgrade over the factory bench. XD
nice job seats look amazing.......here is an idea use the cassette tape holder in the counsol and put power door lock switches n there ...and install power windows.....
Hey bro I may have missed it but I don’t know what year crossfire did you take those seats out of? I have a 2002 S 10 I just bought my son and I want to upgrade the console and the seats? I think they look great bro you did a fantastic job!!💯👍
Paint those rails! Also when you upholster the seats, keep the black but add red cloth inserts to match the original red and give a nice look! Also, what’s the plan with that tired headliner?
I said I was in the video. I'm not reupholstering mint condition seats. I simply said I'd like to replace the logo part with a piece that has a chevrolet or s10 logo embossed in it. I'm replacing the headliner of course.
ask your buddy joesph if you can may put the rest of the crew s10 project into a timelaspe video, and film a review on it when it's finish please give a thumb up if you like the suggestion or not
For the head rest you could do a Chevy bowtie bigger in size and then have them put S 10 inside of the Chevy bowtie I just gave up what I was doing to mine but that’s fine with me I think it would look pretty sweet you should have them do they and bossing in red well do the Chevy bowtie and the S 10 and red I am doing my S 10 and old English writing though I am from Detroit so it only fits LOL
I’m taking a break from car reviews. I really don’t enjoy doing them as much as I used to. Right now, I have more interest in learning new skills and working with my hands. I’m sure after our house gets finished and life starts getting back to normal, I’ll be able to re-introduce them to some degree.
I have a question. I’m planning on, I guess you would call it, a restoration or upgrading my 93 S10 as a retirement project. I rather put a few thousand in my 93 S10 with the 4.3 liter engine, than buy a new truck. My question is, if I remove the bench seats. Will bucket seats from a late 80’s or early 90’s S10 Blazer bolt directly in? I’d like to install the center console too. If anyone has done this seat swap. I’d like some feedback.
There’s a trim panel that goes at the bottom of the dash that I don’t have installed at the moment, so it can’t sit anymore forward. Since it came from a different vehicle, modifications are to be expected, but it’s pretty close. It’ll look like factory when I’m done.
make a video on your golf cart, your, john deer tractor, your wifes new jeep, the c8 corvette, the new gen acura nsx, and the new jeep gladiator please give a thumg up if you like these suggestion
i have a few suggestion for this build install a cam, a tubrocharger or supercharger, a tune, do led lights converstion, install a touch screen audio system, tint the windows, install a cargo bed light and soud deading the interior please give a thumb up if your like the suggestion
When is car reviews coming back. Also one day can you do a review on the 2021 kia telluride one day. Or the 2021 hyundai palasade. Or the 2021 kia seltos one day please. Saabkyle04.
i have a few suggestion for your gmc durmax install a custom front bumper with a wrench on it, a custom exhaust, a cold air intake, a tune, a loud horn, and custom wheels please give a thumbs up if you like the suggestion
“He should have”? Live and let live man, don’t knock someone for wanting to try something different. I even talked about the colors in the video. I’m very happy with my choice.
I’m burned out on reviews. It’s too much to try to juggle with the projects and trying to finish our house. The projects are a lot more satisfying at the end of the day. Actually getting to work with my hands and learn new things has been great. Maybe when life gets a little bit more streamlined, I’ll try to bring some back. I got too stressed out trying to juggle everything. I’m just focusing on doing things that make me happy at this time.
I love all the S10 content, wish more car youtubers would work on S10’s like Kyle
Thanks for the support!
Love it!! To get rid of that clearance issue use some washers as spacers to make the seats tilt into the cab 2mm washer on each part will do it just fine
Thanks for the suggestion bud!
@@saabkyle04 no problem ;)
My father-in-law gave me his 93 extended cab S10. So all of these videos are inspiring thanks for making them 🤘🤘🤘.
Honestly I’d recommend replacing the seatbelts the newer ones are more comfortable plus they are safer
You can't just replace them as far as I'm aware. You'd have to have a whole new hardware setup in this truck because the extended cabs have specific retractors that are hidden behind the rear panels.
@@saabkyle04
Looks like you have to pull out the welder, again.. :)
The black and red look fantastic together - please keep the red carpets! You just don’t see them anymore. Superb job dude.
Thank you! I like the red carpet too, it's definitely staying!
the stock interior is the most 80s/90s chevy interior ever😂
The truck is coming along really nice. Loving the new interior.👍
Hi, Crossfire owner here - don't laugh, they are not as bad as everyone thinks! Anyhoo, the heated element, especially on the base is notoriously weak. Just pressing your hand on the seat base to hard can tear the wires out. Just something to be aware of. The cables under the leather are too tight. There are obviously workarounds that I suggest you get your upholsterer to look at to slacken those wires off. The heated seats are pretty good when working correctly. Keep up the good work.
Idk why anyone would laugh lol, I think they’re quite comfortable for a “sporty” seat! I saw that about the heating elements. Hopefully these are ok considering how nice they are, but if they don’t work, I’ll just leave them be I suppose haha. I saw the video of the guy who repaired them, pretty gnarly job!
I think covering the centre console with leather or alcantara would make it more luxury looking.
That would be cool. I've never done any kind of reupholstering before, might be fun to try out.
@@saabkyle04 👍.
I wish you would do a video of a 1996 Chrysler Sebring JXI, if you could try and find one. It's my favorite old car.
Wow, you are taking the S10 to a whole new level!
Slowly but surely!
Crossfire seats are comfortable good choice Kyle.
Good job looks decent
I did the MR2 seats in my '89 S10 very similarly. They were initially a little higher than I'd like, but after sitting in it, the position is great for resting my arm on the window sill.
Lexol is great on steering wheels! I had an auction car with a lot of grime on the wheel, and Lexol managed to remove all that grime! Definitely a great product hands down.
😎👍🏻👍🏻
its crazy to think some people cant even put on there own wind shield wiper on but we are out here taking seats out of a car to put them in a different truck 😂🤘🏻
Anyone who hates on Kyle for having sponsors is dumb. His sponsors are relevant to his content, and they look worthwhile.
Anyone who says anything negative about it obviously doesn’t live in the real world. Things cost money and creators still need to be able to earn a living.
Very nice job. Good creative upgrades. I like the idea of the two tone. I think I would put in new black carpet then keep all the vinyl / plastic trim in the maroon color.
Otherwise excited to see how it turns out. Have you decided what color you are going to paint it?
Those seats look so cool and comfortable!
I really like it so much. Nice to see the truck gradually take shape.
GMC Typhoon steering wheel, 2nd Gen Blazer center console, Oldsmobile Bravado Door inserts, Blazer ZR2 rear axle, Monte Carlo Wheels and, Chrysler Crossfire seats. Dang, so close to being wholly GM 😄
I LIKE THE 02 SONOMA CONSOLES.
Good video dude!
Hey buddy! Thats looks phenomenal! I do own 1996 S10 single cab with 4.3 V6, it's maroon, lower by 2 inch front, and 3 inch rear. 20 inch 2012 Camaro SS rims. Maybe one day, I probably will change seats to leather style. Keep up the great work!
I enjoy the 2 tone on the truck. If the Crossfire seats don’t work over time, doubt that they won’t work forever but who knows, try getting 2nd gen S-10/Blazer/Jimmy/Bravada leather seats. They may be hard to find but ik some crew cab S10s had them and don’t doubt the SUVs didn’t
Hi Kyle, great interior!
Now how about a home tour video or some updates about it?
Cheers!
Filming the home tour this week! Thanks for your patience!
on that center console, not sure what to do with the casette storage but that big open area at the front of it, modify it to have a wireless charging pad on it.
i love seeing you all sweaty at the end. finish your damn 240 bro
I like to know how to take out the seatbelts in the back on the sides
My brother was joking with me one day he said I should look for fighter jet seats to put in the S 10 considering I already set an a compact cockpit anyways lmao
Ooof.... Been wanting to add a bit of Chrysler to my old '82 El Camino since i am from a Mopar family. Just wasn't sure WHAT I would want to do... After seeing this, maybe I might start looking for some Crossfire seats! Gotta say, it'd be a very nice upgrade over the factory bench. XD
Let be the new seats , looks awesome
Are u selling the red seats I’ll buy them off of you
nice job seats look amazing.......here is an idea use the cassette tape holder in the counsol and put power door lock switches n there ...and install power windows.....
I was thinking of swapping in some power window/power lock doors from my parts truck. It would be a nice extra, even though it's not super necessary.
Hey bro I may have missed it but I don’t know what year crossfire did you take those seats out of? I have a 2002 S 10 I just bought my son and I want to upgrade the console and the seats? I think they look great bro you did a fantastic job!!💯👍
The Bravada inserts WOW, Just Wow
Yeah man, they were a nice score!
Could you please tell me what year the crossfire seats came out of
Cool saabkyle04🤩
Paint those rails! Also when you upholster the seats, keep the black but add red cloth inserts to match the original red and give a nice look! Also, what’s the plan with that tired headliner?
I said I was in the video. I'm not reupholstering mint condition seats. I simply said I'd like to replace the logo part with a piece that has a chevrolet or s10 logo embossed in it. I'm replacing the headliner of course.
Did the seats you inserted have airbags? Can seats with airbags be used and not connected if used in my 99 s10??
ask your buddy joesph if you can may put the rest of the crew s10 project into a timelaspe video, and film a review on it when it's finish please give a thumb up if you like the suggestion or not
I would go with a new black carpet and keep the rest red. Ether way it looks amazing.
Very nice. Good job.
Thank you very much!
Love that Chevy red interior color. I have the same color scheme on my C1500 ext cab.
are you going to film a review on this truck when the serris is finish
Are you a bot I saw you at auto auction rebuilds.
@@kellyoubrejr544 Definitely a spam bot. Just report wherever you see it. Let youtube investigate it.
Hi mr He’s a spam bot. Report
That interior is going to look nice and clean. I was wondering if you are going to add a stereo system in it??
That's the plan!
For the head rest you could do a Chevy bowtie bigger in size and then have them put S 10 inside of the Chevy bowtie I just gave up what I was doing to mine but that’s fine with me I think it would look pretty sweet you should have them do they and bossing in red well do the Chevy bowtie and the S 10 and red I am doing my S 10 and old English writing though I am from Detroit so it only fits LOL
When a Dad gets a new chair @7:36
I put 2011 mustang gt seats in my 92 ranger
That looks awesome!
Thanks!
Hey Kyle... Love the content. When are we getting a house build update ?
I’m planning on filming one this week, thanks!
How tight of fit would it be for a single cab ? I have one and this is a great video.
I got seats out of a 1987 Mercedes 190 to temporarily replace the destroyed seats in my 944. $60 for the pair and they are very very comfortable.
Very cool!
Will this work for 02 s10?
way to go, kyle, what's next on the s10 ext cab restomod list
Lund Moonvisor install! 😎👍🏻
Can we go back to the car reviews bro? I miss those
I’m taking a break from car reviews. I really don’t enjoy doing them as much as I used to. Right now, I have more interest in learning new skills and working with my hands. I’m sure after our house gets finished and life starts getting back to normal, I’ll be able to re-introduce them to some degree.
You could replace the carpet with truck bed liner and color match it red. Although it may be louder in the cab.
Definitely rather have carpet. More comfortable.
Looks great!
What would be really cool is if you could change the arm rests and turn to powered windows!
So what were the seats dimensions?
I am just curious to know why you didn’t just use the track/rails from the crossfire so you didn’t have to do all the modifications you did???
Looking good looks like you have plenty room for a system in there two lol maybe a single 15 in a 4th
Love the "Mercedes" seats LOL. Seriously tho, lobe when youre doing with the build
S10 is now best series. But we need the 240sx again
It’s coming back, follow my social media pages, I just posted about it yesterday
Are you going to do a detailing video on the S10?
I have a question. I’m planning on, I guess you would call it, a restoration or upgrading my 93 S10 as a retirement project. I rather put a few thousand in my 93 S10 with the 4.3 liter engine, than buy a new truck. My question is, if I remove the bench seats. Will bucket seats from a late 80’s or early 90’s S10 Blazer bolt directly in? I’d like to install the center console too. If anyone has done this seat swap. I’d like some feedback.
Miss the Nissan 240🥺
Check out my recent Instagram post, it’s coming back
The 2 tone is nice, breaks up the interior
Agreed, it's different at least
@@saabkyle04 If you replace the carpet, I think gray/graphite carpet would look best
That Crossfire seats would've been SEM'd with burgundy. What I mean by SEM'd is by recoloring the leather with SEM.
Are you going to paint the truck?
How'd you figure out how to get the power settings to work? What'd you tie into?
I showed it in the video, just connected power and ground wires to a battery. I'll wire it properly later.
@@saabkyle04 no I'm asking what will you tie It into when completed? Straight to the battery?
Man I've been jones for my Kyle fix about the truck
Do you still have the viper??
This will be a tough one to let go. Think you’ll keep it?
is the parking brake placed in the footwell?
Yes, next to the driver's side kick panel
what year crossfire seats
Next time use some camaro or cavalier seats 🤷🏾♂️
You should change the Red interior for a nice Black interior
Add censor like when your car gets close to something it beeps
Fan in Haïti
Could you not just push the centre console farther forward to both engage the mounts and close that gap in the front of the cab?
There’s a trim panel that goes at the bottom of the dash that I don’t have installed at the moment, so it can’t sit anymore forward. Since it came from a different vehicle, modifications are to be expected, but it’s pretty close. It’ll look like factory when I’m done.
make a video on your golf cart, your, john deer tractor, your wifes new jeep, the c8 corvette, the new gen acura nsx, and the new jeep gladiator please give a thumg up if you like these suggestion
What is going on with the s10 crew cab truck rebuild
I let it go, my buddy Joe is building it. It was too much for me to tackle. I talked about it in the Chevelle video I uploaded last week.
i have a few suggestion for this build install a cam, a tubrocharger or supercharger, a tune, do led lights converstion, install a touch screen audio system, tint the windows, install a cargo bed light and soud deading the interior please give a thumb up if your like the suggestion
When is car reviews coming back. Also one day can you do a review on the 2021 kia telluride one day. Or the 2021 hyundai palasade. Or the 2021 kia seltos one day please. Saabkyle04.
No plans for car reviews at the moment. I’m burned out on them, I’m enjoying working with my hands and learning new skills.
@@saabkyle04 thank you for replying back. Also do you like snakes. Also have you ever been to ireland or France.
Saabkyle04 can you do an 2020 Infiniti QX60 Review? PLEASE!.
No car reviews planned at this time, trying to focus on more enjoyable things till things get a little less stressful
i have a few suggestion for your gmc durmax install a custom front bumper with a wrench on it, a custom exhaust, a cold air intake, a tune, a loud horn, and custom wheels please give a thumbs up if you like the suggestion
make videos about it
are you going to sell this s10 like the jimmy when it's finish or keep it please reply
Yo what’s up
He should’ve kept the red interior one of the coolest things about obs trucks is the full color matched Interiors 😔
“He should have”? Live and let live man, don’t knock someone for wanting to try something different. I even talked about the colors in the video. I’m very happy with my choice.
Put your own Logo on the seats.
when is your 1986 chevy c10 restoration project coming out i really been wating patiently to see it since april please reply to me
Keep the red seats
Sorry, it’s a little late for that lol
Saabkyle04 will you be changing the whole interior to black or are you going to dye the seats red then?
T.F.D 1982 I said in the video that I was doing more of a custom two tone
I need to replace my 300 seats but it's so expensive h3lpppp
What are you down to now, one car review every other month?
I’m burned out on reviews. It’s too much to try to juggle with the projects and trying to finish our house. The projects are a lot more satisfying at the end of the day. Actually getting to work with my hands and learn new things has been great. Maybe when life gets a little bit more streamlined, I’ll try to bring some back. I got too stressed out trying to juggle everything. I’m just focusing on doing things that make me happy at this time.
Saabkyle04 thats understandable buddy, do what makes you happy.
I appreciate that pal!
Or SK04 logo......
I'd rather not put my logo in it, I want to try and make it look "factory"
I was hoping he was going to reupholster these red but ok
Well that’d be kind of hard considering I don’t ave the equipment or know how to reupholster..
Third
Man I would love to have the factory buckets that you removed...
you should put the whole entire jimmy serris in to a time laspe video please give a thumb up if you like the suggestion
s10 seats are more cool and have more luxurious comfort than the junky Chrysler bucket seats.
Sorry you feel that way, but at the end of the day, I’m going to do what I wanna do to my truck. I think they turned out great and I had fun doing it.