I would like to send a special thanks all the way from the Bahamas. I've watched this video 20 times wondering if I should try this myself or give my mechanic 500 bucks to switch my key tumbler, EWS and DME. Well I was tired of waiting and didn't want to spend the money, I tried it and I'm so glad to say that it worked!!!! I only wished u showed how to remove the tumbler/key switch. That took some serious research but was so easy it was scary. I have a 2004 330CI stick shift vert. Long story short, my previous mech blew on original DME. I sent it to be repaired and was temp using a Z4 2.5 engine DME and EWS. Every time I hit 3 thousand RMP the EML light would turn on and the engine would shut off. WHILE DRVING! He didn't tell me he replaced my original 330ci DME with a 2.5 Z4 DME!!! Anyways thanks. Subscriber for life.
@@jaydarville9160 who’s I still had the website to send you directly to the spot but there’s a place in Miami that repairs the old one. You gatta hit the BMW forum.
It is possible to swap the Key Cylinder with Key, EWS and DME from a similar vehicle and it works. I did it on a 2000 323ci due to my only key being stolen. The hardest part was having to Drill out the existing key Cylinder. To do so, it is best to remove the Steer Wheel, only if drilling is required. For those who might not know ... The DME is located behind the Transmission Control Module in the same compartment in the back right corner under the hood. Good Luck!
Great video. I did exactly what you described. I own a 2000 323ci and bought the exact kit ECU,DME,and key cylinder. After installing everything as instructed unfortunately the car doesn’t seem to turn over at all. All light turn on but car doesn’t seem to crank at all. I’m a little stumped at the moment. But if any suggestions it would be greatly appreciated. Thank you
Hope the installation goes smooth for you. Thank you for watching our channel and hope you're already a subscriber. Feel free to share our channel with anyone that could benefit from it.
Louis D’ la Riviere what was the problem with your car I have a 325 that just cranks and I know it’s getting fuel I’m thinking I need to do the swap because I bought the car with no key and bought a replacement from bmw but it still won’t start it just cranks and sounds like it wants to
Joe Teklemariam my old mechanic did a terrible job with the service and every 100k miles you should change hoses, oil separator etc., plastic parts, they go bad it’s a 2003 so u must know, long story short, i had a lean problem with the engine, I change everything then learn about it, at the end I spend hours in videos of e46s then it all points to the DME, swap it bro, or if you have a new one, pair it with the key
Im swapping my DME and EWS, is it required to replace the key tumbler or can i swap the other keys internals to my current key and it will work? Because i would like to have the same key for opening the trunk and doors from outside
Exellent video. I have two bmw 2009 750 il and 2012 x5 3.5 diesel. Both cars are from auction. Ecm got wet. also trunk got wet. Can i swap key buton ecm dem do you sale any of this. Thanks.
Forgot... 5 series is a postlift version... so have to transfer acceleration pedal as well, that will required extra wiring ... is it just a simple wire or a whole bunch of harness from 5series interior. thankyou
Hey there! I bought a 1999 E46 328i but the key is missing (great deal, other than the key), I was wondering if you could point me in the right direction for doing this? I need to be able to bypass the anti theft, and it would be awesome if I could just replace a few parts and have a new, working key. Thanks!
Have yall done like a swap out on the ews modules, in particular im trying to get an ews from a '99 323i to a 2000 z3 because the chip/transpondent from z3 fob is missing. Would it work if i dont swap the ignition cylinder hence door locks, just put the chip into the key, and the modules on the dash?
Hello, I have a year 2000 318ci with the m43 engine. Will I be able to do the same with my car? And not have to code it? Just straight plug and play like in your video? Many thanks George.
I have a BMW 325 CI 2006 at first I was able to turn on the car from the first time and sometimes will take 2 to 3 times for the car to start. I took it to my friend shop and the scanner gave him " immobilizer code" I took it to the dealership and told me i have to change the EWS but when i went to pick it up wouldn't start anymore. what should I do ?
Hey. I have here 525i donor car, full engine with harness DME EWS and Ignition with key. Motor is going to be put into e46 318i. Plug and play..? thanks
2005 330 CI 29,000 mi, car cranks but won’t start, but only when it’s cold out. Live in NY. Had to have it towed to the dealer, after ruling out fuel pump, sensor relay, new key, they say it’s the DME, they took out the DME and kept it inside over night put it back and the car that was in the cold and it started right up. They want $1900, is this fair? And do you think this is the right diagnosis. Can the cold affect the DME?
Great Question. Yes, you can use with manual or automatic as long as the DME has the same part # and your bmw is the same year as the donor car. You can swap without having to reprogram.
@@bimmermerchant Sorry but that is wrong. The EWS from the Automatic looks for a signal from the gearbox ("P") whereas the one from the manual does not have this. Therefore you cannot interchange between auto and manual.
how do i by pass the ews i origanally lost the 318 motor and them52 the key barral was all stuffed up how can by pass my ews2 im waiting for a scannaer adapter for obd1 so i can wipe the ews2 plz give me a way to by pass the ews i have the original chip for the motor plz i need heed help i got it to crank but no start
currently working on a 05 x3. I am assuming the key lost programming because the key fob stopped unlocking the doors 2 days before the car stopped starting. Now , i turn the key and the dash lights up but no engine crank. I jumped the starter and it turns over but car will not run. Are there any test you can recommend before I spend the money and buy replacement parts?
Its a common issue where keys security feature stops working. happened on my 99 BMW 740i. Luckily had a spare key and engine turned on. You can purchase a key from dealer or buy the whole dme kit.
bimmermerchant........i swapd it back.......but i have to bag my key around to get it to start the car....u kno if chip in key just needs pushd back in?
Wow, I cannot believe anyone would change DME, EWS, key and ignition switch in a lost key situation. This is the most expensive and time consuming way, simply put dumb. If you loose a key BRAND NEW ONE from the dealer around $150 ALREADY CUT AND PROGRAMMED TO YOUR EWS. No need to waste time and money on replacing EWS, DME and ignition. ALSO your EWS holds VO, VIN, coding and mileage so by installing one from another car you asking for problems. If you need to replace DME in E46, you can get one on eBay for $25-$100 and swap a memory chip. If you not comfortable with this, you can have it done for around $150 also on eBay. Total cost $250-$275.
Trying to swap an M54B30 engine to replace my 323ci's M52tuB25. What are the extra things I'd need to successfully complete this upgrade? Or should I just take the M52tuB28 which employs the same drive by cable system as my manual gear 323ci?
Thats right you no longer have to program assuming to are swapping from auto to auto or manual to manual car. Im not sure this works if you go from manual to auto version. So you'll have to likely specify whether you have a manual trans car or an auto trans car.
I have called and emailed and never heard back from your company to purchase these components. Has anyone ordered or been in contact with this company?
JUST CHANGE OUT THE CHIP INSIDE THE DME FROM UR OLD ONE WITH THE REPLACEMENT DME NO NEED TO REPLACE THE EWS AND KEY. ON E46 ITS THE 44 Leg chip it will say on it AM29F400BB. ITs the memory chip.
I've got a BMW e53 X5 I needing a swap with the key key tumbler bws box and a Dme I would really like to have your phone number so I can get in touch with you and buy the kit from you
Bimmermerchamt is amazing talked to him on the phone helped me diag my 325i very helpful and very knowledgeable I am for ever grateful and will order all my parts that I can through him from now on.
Hi I lost my key to my 318 1995 I'm putting a m54 from 323 98 with auto but I'm putting a manual into it It's auto both ATM How much for key ingnition and ews and ecu How much if u got 1 Great
i just put in the dme, ews, ignition and key in a 2001325i from a 2002 325ci and everything works it revs to high rpms but dies when let idle, could the problem be some kind of vacuum hose or leak.
I would like to send a special thanks all the way from the Bahamas. I've watched this video 20 times wondering if I should try this myself or give my mechanic 500 bucks to switch my key tumbler, EWS and DME. Well I was tired of waiting and didn't want to spend the money, I tried it and I'm so glad to say that it worked!!!! I only wished u showed how to remove the tumbler/key switch. That took some serious research but was so easy it was scary. I have a 2004 330CI stick shift vert. Long story short, my previous mech blew on original DME. I sent it to be repaired and was temp using a Z4 2.5 engine DME and EWS. Every time I hit 3 thousand RMP the EML light would turn on and the engine would shut off. WHILE DRVING! He didn't tell me he replaced my original 330ci DME with a 2.5 Z4 DME!!! Anyways thanks. Subscriber for life.
Thanks for sharing your story. Its always our pleasure to share information and save a bmw owner time and money.
Hey I'm in the Bahamas, i have a series 1 120i , I'm thinking if i should replace myself.
@@jaydarville9160 gonna be impossible to find those parts local. Find the parts in Mia and ship them.
@@TreIzle mines all the way in Germany 🤦🏽♂️. I'm hoping it's a relay fuse went bad or something other than the DME setup.
@@jaydarville9160 who’s I still had the website to send you directly to the spot but there’s a place in Miami that repairs the old one. You gatta hit the BMW forum.
It is possible to swap the Key Cylinder with Key, EWS and DME from a similar vehicle and it works.
I did it on a 2000 323ci due to my only key being stolen. The hardest part was having to Drill out the existing key Cylinder. To do so, it is best to remove the Steer Wheel, only if drilling is required.
For those who might not know ... The DME is located behind the Transmission Control Module in the same compartment in the back right corner under the hood. Good Luck!
What if you plug and play ecu for the e46 m3 s54 would it start without the key been program?
Everything should be from the same donor car for it to work.
Great video. I did exactly what you described. I own a 2000 323ci and bought the exact kit ECU,DME,and key cylinder. After installing everything as instructed unfortunately the car doesn’t seem to turn over at all. All light turn on but car doesn’t seem to crank at all. I’m a little stumped at the moment. But if any suggestions it would be greatly appreciated. Thank you
Tune your ecu to the car
Cool video.. will the remote open close door buttons still work with the new fob also?
What about the VIN and mileage amounts. Wont you get a tamper dot because the VIN in the LCM would be different than DME VIN?
I purchased that whole set on eBay and still not starting?
Hope the installation goes smooth for you. Thank you for watching our channel and hope you're already a subscriber. Feel free to share our channel with anyone that could benefit from it.
I just order my kit, will be writing a review in the next days.
It worked 💯 thnx bro
Louis D’ la Riviere what was the problem with your car I have a 325 that just cranks and I know it’s getting fuel I’m thinking I need to do the swap because I bought the car with no key and bought a replacement from bmw but it still won’t start it just cranks and sounds like it wants to
Joe Teklemariam my old mechanic did a terrible job with the service and every 100k miles you should change hoses, oil separator etc., plastic parts, they go bad it’s a 2003 so u must know, long story short, i had a lean problem with the engine, I change everything then learn about it, at the end I spend hours in videos of e46s then it all points to the DME, swap it bro, or if you have a new one, pair it with the key
Maybe the fuel pump
Im swapping my DME and EWS, is it required to replace the key tumbler or can i swap the other keys internals to my current key and it will work? Because i would like to have the same key for opening the trunk and doors from outside
Is there a way to track down the computer on my bmw? I had a locksmith steal my computer and never gave me a key.
Can you not change the key cylinder and just swap the chip inside the key to my old key or is the cylinder connected to the ems as well
can u change just the EWS and the synchronize all the components?
Exellent video. I have two bmw 2009 750 il and 2012 x5 3.5 diesel. Both cars are from auction. Ecm got wet. also trunk got wet. Can i swap key buton ecm dem do you sale any of this. Thanks.
Can i just switch the ews and dme and just reprogram the key to new ews? Or does the key cylinders only work with a specific ews?
buy whole set.
Hi .. how can I get a set like that 2006 BMW 750i. post a link
Hi.. I’m in need of a dme ews2 set.. for bmw z3 1.9
Hi I have a question if I change only the ews and the key and key tumbler with my old computer box Wil it start
Excellent Video. Thanks
Thanks
How to take off key cylinder
Forgot... 5 series is a postlift version... so have to transfer acceleration pedal as well, that will required extra wiring ... is it just a simple wire or a whole bunch of harness from 5series interior. thankyou
does it matter if the car is originally automatic can u swap it with an ecu from a donor car that was manual?
What about a e39 to e46
Hey there! I bought a 1999 E46 328i but the key is missing (great deal, other than the key), I was wondering if you could point me in the right direction for doing this? I need to be able to bypass the anti theft, and it would be awesome if I could just replace a few parts and have a new, working key. Thanks!
Have yall done like a swap out on the ews modules, in particular im trying to get an ews from a '99 323i to a 2000 z3 because the chip/transpondent from z3 fob is missing. Would it work if i dont swap the ignition cylinder hence door locks, just put the chip into the key, and the modules on the dash?
Would a 328i Dme ews key work on a 1999 bmw 323i?
lost my key got the kit install is there a way to remove cilinder with out original key
Do anyone know if the part number has to be the same even if the kit comes from a same model in my case a bmw 325i
Will the key still unlock the doors even tho it’s a different one ?
Yes, new key cylinder will lock/unlock all doors
CAN YOU REPAIR A DME FOR A 2003 BMW 745LI NO SPARK ISSUE
Will it work if it came out of a car with a manual transmission and I have an automatic transmission
From our experience, if your bmw is automatic, then donor dme kit would need to be auto as well.
If i got two of samd bmw i swap it
Do you have a kit for a BMW 325i- MFG date is 03/03? Whats it cost?
view our website www.bimmermerchant.com
Hello, I have a year 2000 318ci with the m43 engine. Will I be able to do the same with my car? And not have to code it? Just straight plug and play like in your video?
Many thanks George.
my car 325i and i have change the engin with 328i does it make problem
Would you be so kind to tell me if a 330i DME and EWS will work in a 325i, both are 2002 ?
Tyia.
No they are not compatible
If you swap the dms and ews will the new key still work with the door and trunk
No. That is why we sell driver front door and trunk cylinder with our DME kits so new key works with all cylinders.
www.bimmermerchant.com
@@bimmermerchantwhen u do this the key dont work with lockin the doors
I just purchased a new key from Harriman NY BMW for approximately $200. Looks like the original key
will this work for a 2003 bmw 745li? crank no start,no spark , new crankshaft sensor didnt work.
Jorge Fernandez We haven't swapped dme on a 745 models so we don't know if process will work.
HI,ITS POSSIBLE TO CHANGE THE EWS AND KEYS ONLY?WILL THE CAR START OR NOT?
no, it will not.
I have a BMW 325 CI 2006 at first I was able to turn on the car from the first time and sometimes will take 2 to 3 times for the car to start. I took it to my friend shop and the scanner gave him " immobilizer code" I took it to the dealership and told me i have to change the EWS but when i went to pick it up wouldn't start anymore. what should I do ?
I got a e34 I lost the key what would I half to do
easiest process would be to contact the dealer, provide your vin and see if they can order a new key
Can a lock Smith make the key
@@600dowg Dont think so but let us know if we are wrong
Where you located and how much for the kit
We are located in Fullerton, Ca 92831
view our website for pricing and availability.
www.bimmermerchant.com
Bimmermerchant,
Do you always have to change the DME with the EWS incl. key etc.,
Or can I also only change the EWS and key etc.
Computer, ews and key must be installed together.
Yes
i swap the dme ews and the key. now how do i unlock and lock the door with the new key?
I got same problem, did you find down how and why?
I just purchased a kit just put everything on it cranks but won't turn over. & the alarm on key is. It working in wondering if the key is programmed
Did you install all parts in the kit you received? Why did you order a dme kit in the first place?
Hey. I have here 525i donor car, full engine with harness DME EWS and Ignition with key. Motor is going to be put into e46 318i. Plug and play..? thanks
Did it work.? , i have also same situation, I have 320i and donor 330i, with everything's, I am in process to swap them
2005 330 CI 29,000 mi, car cranks but won’t start, but only when it’s cold out. Live in NY. Had to have it towed to the dealer, after ruling out fuel pump, sensor relay, new key, they say it’s the DME, they took out the DME and kept it inside over night put it back and the car that was in the cold and it started right up. They want $1900, is this fair? And do you think this is the right diagnosis. Can the cold affect the DME?
Only if it is a weak solder problem
Can you use one from an auto in a manual or vice versa?
Great Question. Yes, you can use with manual or automatic as long as the DME has the same part # and your bmw is the same year as the donor car. You can swap without having to reprogram.
@@bimmermerchant Sorry but that is wrong. The EWS from the Automatic looks for a signal from the gearbox ("P") whereas the one from the manual does not have this. Therefore you cannot interchange between auto and manual.
@@brianpleysier7749 Thank you for sharing
Can you delete the speed sensor off if the m54 BMW dme
dont think so.
how do i by pass the ews i origanally lost the 318 motor and them52 the key barral was all stuffed up
how can by pass my ews2 im waiting for a scannaer adapter for obd1 so i can wipe the ews2
plz give me a way to by pass the ews i have the original chip for the motor
plz i need heed help i got it to crank but no start
will it work on my 525i and wil it be able to lock my doors
DME, EWS and Tumbler and Key will work on a 525i, However, door locks won't work.
bimmermerchant. how do i order the whole set and how much do they run for
bimmermerchant how to get the door locks work?
The part number need to matched?
yes
I found one same part number but my is 04 bmw x3 and the DME was on 3003 z3 still work? Orr need to be the same car?
currently working on a 05 x3. I am assuming the key lost programming because the key fob stopped unlocking the doors 2 days before the car stopped starting. Now , i turn the key and the dash lights up but no engine crank. I jumped the starter and it turns over but car will not run. Are there any test you can recommend before I spend the money and buy replacement parts?
Its a common issue where keys security feature stops working. happened on my 99 BMW 740i. Luckily had a spare key and engine turned on. You can purchase a key from dealer or buy the whole dme kit.
I have E46 325xi 2003, can I swap with the same car and model but 2005 manual.
thank you
Shud have called the video, "Went ahead".
I am assuming the same true of an 04-05 6 series?
correct
www.bimmermerchant.com
i have 2000 528i could i use dme ewc n key from 02 530i if i swap bcm with it
i have wrecked parts 530i runs n drives
No, 528i has the M52 engine while the 530i has M54 engine, different software.
bimmermerchant........i swapd it back.......but i have to bag my key around to get it to start the car....u kno if chip in key just needs pushd back in?
or any way to fix it tell i get the extra funds to get a new 1
Dose it work for u?
I have 320i and swap engine from 330i with dme and ewc n key, will work for me or not?
Wow, I cannot believe anyone would change DME, EWS, key and ignition switch in a lost key situation. This is the most expensive and time consuming way, simply put dumb. If you loose a key BRAND NEW ONE from the dealer around $150 ALREADY CUT AND PROGRAMMED TO YOUR EWS. No need to waste time and money on replacing EWS, DME and ignition. ALSO your EWS holds VO, VIN, coding and mileage so by installing one from another car you asking for problems. If you need to replace DME in E46, you can get one on eBay for $25-$100 and swap a memory chip. If you not comfortable with this, you can have it done for around $150 also on eBay. Total cost $250-$275.
Hi, I swapped a 330i 2001 into a 325i 2004 runs great but door locks are giving me trouble even after changing many of the lock electronics
Steve Martin it still works? I want to swap a 1999 323 into my 2005 325
Trying to swap an M54B30 engine to replace my 323ci's M52tuB25. What are the extra things I'd need to successfully complete this upgrade? Or should I just take the M52tuB28 which employs the same drive by cable system as my manual gear 323ci?
Lanre Oladejo ran into the same problem any help?
What if its a Manuel vs automatic
Excuse me when ir changes. That thres. Parts have to go one to program or no longer
Thats right you no longer have to program assuming to are swapping from auto to auto or manual to manual car. Im not sure this works if you go from manual to auto version. So you'll have to likely specify whether you have a manual trans car or an auto trans car.
What's your site name
bimmermerchant.com
can i use the dme and ews from a 323ci on mi 325ci?
No. 323 had M52 and 325ci had M54 engines
Do i need to reprogram if I swap in a 06 325i?
+Andy U Yes, you would need to reprogram
I have called and emailed and never heard back from your company to purchase these components. Has anyone ordered or been in contact with this company?
hello, sorry that you haven't been able to get through. email us at info@bimmermerchant.com and i will be sure to respond back to you. Thanks
how you remove the key tumbler?
here you go. ruclips.net/video/07nXc22eMhg/видео.html
+bimmermerchant
thanks man. this video help me a lot.
I did this on my bmw and works perfectly fine.
Would this affect my mileage would I have to swap it over to the replacement parts or would it stay the same ? And would I get the tamper dot.
Mileage would not get affected.
I have p0604 it's the reason why I need to swap
This doesn’t work on 2004 bmw 545i fyi
That already make my payment for a kit bmw 323 year 99 as soon as the order arrives
When you think you got just a destroyed dme and the engine will start you can just replace the dme without any other party
Excellent video, just needed to do this to my e38...dealer wanted 1500$. Thank you
We have a kit for under $400
did you change the locks in the car to match the key?
JUST CHANGE OUT THE CHIP INSIDE THE DME FROM UR OLD ONE WITH THE REPLACEMENT DME NO NEED TO REPLACE THE EWS AND KEY. ON E46 ITS THE 44 Leg chip it will say on it AM29F400BB. ITs the memory chip.
Jacob Wyatt Thanks for sharing that valuable information.
+Jacob Knight Will that work for a swap? i want to swap from the ms45 dme to ms43
I'm just here because I'm thinking of tuning my ecu but if I fuck up I'll need a new one
You need to get a whole dme kit. check our website www.bimmermerchant.com
ews, keys and ecu?
I've got a BMW e53 X5 I needing a swap with the key key tumbler bws box and a Dme I would really like to have your phone number so I can get in touch with you and buy the kit from you
refer to our website
I'm putting it into a e36
Bimmermerchamt is amazing talked to him on the phone helped me diag my 325i very helpful and very knowledgeable I am for ever grateful and will order all my parts that I can through him from now on.
My pleasure talking with you.
Your business is greatly appreciated.
Hi I lost my key to my 318 1995
I'm putting a m54 from 323 98 with auto but I'm putting a manual into it
It's auto both ATM
How much for key ingnition and ews and ecu
How much if u got 1
Great
Alekxx Goran Hi i have a 325i 2004 can i replace only the ews? or the two parts has to be programed the ews and dme
I swapped a 740i motor into a 540i do I need to reprogram the key? Right now it won't start.
I have a 04 530i if so please email me
View our website for DME www.bimmermerchant.com
I have a bmw 323i 2000 n it's not accelerating I press the gas and it doesn't seem to catch up to speed could this kit be the problem
i just put in the dme, ews, ignition and key in a 2001325i from a 2002 325ci and everything works it revs to high rpms but dies when let idle, could the problem be some kind of vacuum hose or leak.
I have a bmw 323i 2000 n it's not accelerating I press the gas and it doesn't seem to catch up to speed could this kit be the problem
Did u fine solution to ur problem
I have a bmw 323i 2000 and it's not accelerating I press the gas and it doesn't seem to catch up to speed could this kit be the problem.
I have a bmw 323i 2000 and it's not accelerating I press the gas and it doesn't seem to catch up to speed could this kit be the problem.