Something to remember is once the ews delete has been performed the car can be very easily stolen using a flat blade screwdriver and a hammer. So it’s something to considered when deciding to do this to a street car or not.
If I unplug the ews will it start then? I,ve been dropping my keys a lot and the last time everything fell out, and now doesnt click together. Since then it starts only with the green chip if its together with the blade. But now after a week no crank no clicks when I turn the key. Plus my key wont open the doors when I turn it, it just spins 360. Anyway I’m shure it has to be with anti theft system or the ews.( key also has no battery, died).
Evan, you are THE MAN! It worked! Incredible. I want to tell others that this actually works. Dont get frustrated... well, you will get frustrated but don't give up. It works. I Never done anything (electronic) like this before. 2003 525i was No crank No start when manually hit starter. I watched any video I could find... and I watched yours about 15 times thru the process. There are a lot of steps, but you actually hit every detail. No other video even helped. When you got to the part about ground out pin 104... I thought it was over my head. But I had no alternatives, so I watched and rewatched and trusted your instruction. Bro, I can't tell how much... actually, I can tell you that you saved this car's life. Had this not worked it was going to the junkyard. And how good it felt when it actually started. Now for that head gasket issue...
I saw you were getting read errors when connecting. I had the same and a latency setting of 1 on the serial port. Turns out that a latency setting of 1 is too short. I increased mine to 8 and it was 100% reliable after that.
@@EvanGoyuk how much do you charge to do this I have an 2003 bmw 325i e46 v6 and my car key transponder is telling my ews system that the car is not going to start I need help
I have a 2003 325xi with a blown 2.5 motor! I want to replace it with a 3.0 motor from a 2004 X3! After the swap, what would I have to do to get it fired up?
I need to do an EWS delete on my ms45. Any chance you could walk me through exactly the order of how to do everything. I'm planning on just doing this with the DME in the car and grounding to the strut tower or something.
Can I send you a different DME from ( e39 540i 2002) and swap it with my 2002 e39 540i ? Thanks. Great video! Sorry for my ignorance? I do all basic maintenance on my e46 and e39 540 but really NO knowledge on computers.
I have a us 2001 740il. You mentioned you do this for a fee. How much would it be for you to send me replacement parts with ews deleted ready to plug and play?
Hi, I have a 525i E39, should I use the E46 325i patch or the e39 530i patch ? The only required hardware is the Godiag gt100 box and the K+DCAN cable ? Thanks
Hi, my girlfriend bought a 98 540i with out me checking it out. It's a basket case it's had treakers working on it but so for I'm seeing it looks like ews problem what would you charge to flash my ecu?
Can you sync or reprogram my DME and CAS together remotely? I have a 2007 BMW 525I 3.0l N52. I bought it with this issue. Keys work to lock and unlock but no crank no start. Replaced battery with good battery, replaced starter, fuel pump works and engine is able to turn independently from the push to start button. Car seemed to be without a battery for a few months.
So I have a 2002 BMW 530i with ews3 what IC codes and all that what I need to bypass the immobilizer or how much would it cost for you to create those things that you were talking about and code mine so I can just plug it in and it does it
@@EvanGoyuk I bought used dme and cas since old key broke and doesn't work and installed them and car starts fine but won't shift out of park. Then researching I realized egs is tied in as well. Guy never responded if he had the egs. I've been trying to use bmw scanner and a cable but it won't read the modules. And on the adapter pins 7-8 are jumpers but so are 8-16 not sure if they're supposed to be.
My DME is probably dying, I have multiple cylinder misfire a shadow code on control unit self test. I am looking to get a used DME (preferably low miles donor) programmed it to my VIN and with latest software update. Its a daily drive car and probably do not want any fancy mods and strain the 150K+ mile old motor. I do not mind the EWS delete, in fact that could solve my no intermittent no crank no start issue on hot weather days. I dont think people would want to steal my 19 year old car. I dont want to risk doing it on my existing original DME . Can you help?
Can this be done on a MSD80? I have a 335i that’s giving me trouble I’ve replaced EWS, DME, and key all synced together and still car is doing nothing. My next step is to try to delete the EWS if possible.
Thank you so much I just bought an M3 that someone tried to steal and ignition was replaced and wouldn't start and is missing silver ring I had no idea that sent the signal so this is what I'm going to try I used your Amazon link to order the cable thank you so much for all your great video's
@@EvanGoyuk I have an extra DME out of a 2006 E83 X3 M I would like to get it to plug and play without the EWS because in 06 they went to that Ews 3.3 and I'd have to change the EWS from that other x3 and reprogram a key that I have for that ecu.
Would I be able to grab a used DME from a junkyard, delete the EWS, and be able to plug it into my car no problem? I'm having sporadic misfires from some ignition coils not receiving signal. Can't tell if it's a DME or a sensor issue. Thanks!
You video is very interesting and helpful. I have a question: my ecu is a bosch for bmw e46 318i, which pin and which ic do I ground to put on boot mode? And the processor is covered with a sticker.
I have price question. Im fixing to undertake a project. And i need to essentials in the dme working. Engine and transmission. Doing a complete drivetrain swap.
I tried this with a second DME from the wrecking yard. Loading the files onto the new DME seemed to go fine. Car cranks, but does not start. Is there some additional detail missing from this video to actually get this done. INPA reports 2 errors "115 TPS-Adaption" & "128 EWS-Transmission/-Parity" Advise on what I need to to?
Hi Evan I got a key from BMW that will turn the dash lights on etc but won't start my car? Previous owner must of used the BMW ews slot so when BMW have done my key it's useless basically. is there anyway to get this key working again by changing the ews slot etc? Any help would be massively appreciated Its a BMW 2004 E46
Hi Evan thanx for AL ur info it really helps us. I'm from south Africa. I have a bmw e46 m43 engine 1999 model. My icu have burned,i bay new one from ebay.bay new key, ignition and ews from scrap yard. Install everything but Wil not start. What do u think is the problem.
I have a 04 r53 mini Cooper S with the EWS3+ system a short at the starter signal wire fried the EWS module would this delete process work or how much to send it to you for you to do it and what is the turn over time it's my only car and I'm in a bind need something done fast
I'll give you a good spare ms 40x dme to add my vin, delete ews, add pop and bangs, increase throttle response?? One dme is from a 2000 323i, the other is an 02 325i. Mine is a 330ci however so I have 3. But won't be modifying my stock automatic dme until I learn myself with a laptop I don't have yet.
I got confuse - the VIN section hex code from new downloaded .bin firmware it's a different from the .bin from the back up on DME... if flash directly would that change the VIN that comes with the new firmware?
Hey morning just checking your video and man it leaves me hope that my e39 has life yet would want be the charge to eliminate ews for my vehicle and of course how soon can we get it done please reply ASAP
Hey Evan, I have a 2006 mini that was in a flood. It has a code for wrong code from the ews4. Can you do a ews delete on the dme? Also does the mini need the footwell module to start. The car cranks but doesn’t start.
Hi I got a 323i e46 last time I used battery pack to start. Idled for a minute then just died. Cranks but won't start. Think I need a bench setup it's ms42
Hello I have a 2010 BMW X5 E70 that needs a new DME and coded. Are you still programing DME's and or selling them pre-programed. Also I'm interested in the EWS Delete. Thanks, ShawnRamone
I have a 2004 BMW X5 4.4 I need my DME reprogrammed and if love to have the news delete can you help me Evan this thing will crank all day but obd scan says the transmission and dme aren't communicating
Would i need to flash or delete my ews if i did a engine replacment? Does the engine hold a chassinr or something? I replaced my engine, got no fault codes but the car wont crank :(
Hello Evan, I did all everything as you instructed in this video. The car turns over the started but the car itself does not turn on. What could I have missed??
Great video my gf lost key so i used screwdriver on ignition but not starting i took off ews crank no start i would love you to delete an tune my dmi how much an how long
I have a 1997 bmw z3 and I need to replace the ignition and the ecu But I heard that if I do that I have to reprogram everything I can’t just plug and play?
DOES THE DME HAVE TO BE ON A BENCH IN ORDER TO CHANGE THE VIN WITH TUNERPRO THE WAY YOU DID IN THIS VID?? IN TUNERPRO THERE IS 13 BOXES BUT THE VIN IS 17 DIGITS. DO I PUT THE LAST 13 NUMBERS OF THE VIN?? IM TRYIN IT TODAY!! BRILLANT INFO!!!
Awesome thanks, I converted the vin to hex but do I put in the complete hexvin in the first box under box20? Or second Box 2C etc? Which box do I put the vin in? There’s 13 boxes?
Hi Evan, we have an EWS where for what ever reason it has lost all of its data when we read it during a new key addition. Whats the best procedure for adding a 2nd hand EWS to an existing Mini 2006. Thanks
Hey I have a 1997 318i I bought that the keys had been lost . I've looked and bought alot of different things that were suppose to work but nothing I've bought works. If I send you the ews2 box and dme box would you be able to do a ews2 delete
Hi, I have an old track car, I have an engine and ecu from 530 bmw dde5, would it be possible to bypass immobiliser in due and would it start the car ? Cheers
Would you mind telling me how to know which DME I have? Or how can I tell which one I have, please? Also, your Amazon store does not show the bench wiring setup for sale, it isn't even listed. Thanks
I assume by the absence of a reply that my DME is not one of the models that can be done using this method. Also, I have seen that the ms4.x are for the inline 6 cylinder engines and not the V8's. Oh well, it looked promising at first.
@EvanGoyuk great so simply put, I bought a 2006 BMW 330ci. I was told keys was made but car still didn't turn on. They did something with the intake and it fired up to prove the motor is good. The guy said he thinks it's the box that houses the key pass codes because you can it can only hold 6 remade keys in a lifetime? I don't know about that. So you mentioned immobilizer bypass and you spoke on the key password box to just using a cut key. What do I need to buy from you to make this an easy process to foxing the cars issue?
I have a 2002 bmw 325i Got key replaced, no crank no start, when I remove the plug from the EWS 3 and put a 30 amp modified fuse it cranks with the key but doesn’t start. Need help, would this work for me?
I have a E53 diesel M57 motor, but the only Firmware files are for M54 petrol motors in the E53 X5. Can I use the M54 files to remove the EWS from my M57 diesel powered X5? Or is there a M57 version for the X5 MS43 firmware?
Can you help me. Bought an m54b30 out of an X3 , no harness or ECU/dme. Installed motor with original 330 computer and harness. It starts but won't drive, automatic transmission
@@EvanGoyuk so, flash stock 0069 bin, synce ews. Flash patched 0069 community bin with ews delete and not worry ima be setting while my ews decides to work or not??
HI there Evan I'm Manny and i have a 2013 bmw 550i n63 f10 WBAFR9C56DDX80982 and recently i had to replace the transmission,battery and the key fob battery and now my bow will crank but won't start. The car has been sitting for quite a while on the car hoist because was hard to find the same type transmission for this car I do have a autel MK 808 diagnostic reader and i got and ews immobilization code and also a f2108 typeof code don't remember because i disconnected the diagnostic tool. Can you help on how to fix this problem. I'm guessing the second code the Bf2108 was generated by the EWS code
Can you do one with the MS4X flash tool and show sap, cat delete? Also when do the definition files come in? Do you need the firmware, patch list and definition files?
hey im having an issue where the car wont crank or start. i replaced starter and can maually crank it if i touch the white cable to positive terminal. but it wont start. is this an ews issue or the dme losing sync? if you can help i would very much appreciate it.
i have a 98 318 ti i am having the problem with the ews. i put a new column in because the column as damaged... it has the original ignition switch from my old one installed back into the new one..so my car will not even crank nor turn over.. i took the module loose and jump the two thicker wires and the car will turn over but no spark nor fuel..is there a kit and a program to make this bypass happen..what im asking is can you help with the info i need to bypass the system properly..thank you
if im on 0037, just follow what you did and itll update and get rid of ews at the same time? or do i need to change the vin to whats on my ecu? i think im overthinking this. but ive already bricked my car once.... and "updating" from 0037 to the latest, well there isnt much out there really.
By any chance would you know if you were to get a DME from the junkyard and rewrite your vin to the car and do the EWS delete would it interfere with smogging your vehicle as it’s a daily, not a track or drift car, I’m in CA and have strict smog rules
Something to remember is once the ews delete has been performed the car can be very easily stolen using a flat blade screwdriver and a hammer. So it’s something to considered when deciding to do this to a street car or not.
I should have definitely mentioned this lol. I was more excited about virginizing a DME
No worries no one will want to steal a 20 year old bmw anyways UNLESS its an m3 lol
If I unplug the ews will it start then? I,ve been dropping my keys a lot and the last time everything fell out, and now doesnt click together. Since then it starts only with the green chip if its together with the blade. But now after a week no crank no clicks when I turn the key. Plus my key wont open the doors when I turn it, it just spins 360. Anyway I’m shure it has to be with anti theft system or the ews.( key also has no battery, died).
So my car is always open (not locked) maybe thats why?
You need to probably do an ews delete. I can help remotely. Message me on Instagram @evangoyuk
Evan, you are THE MAN! It worked! Incredible. I want to tell others that this actually works. Dont get frustrated... well, you will get frustrated but don't give up. It works. I Never done anything (electronic) like this before. 2003 525i was No crank No start when manually hit starter. I watched any video I could find... and I watched yours about 15 times thru the process. There are a lot of steps, but you actually hit every detail. No other video even helped. When you got to the part about ground out pin 104... I thought it was over my head. But I had no alternatives, so I watched and rewatched and trusted your instruction. Bro, I can't tell how much... actually, I can tell you that you saved this car's life. Had this not worked it was going to the junkyard. And how good it felt when it actually started. Now for that head gasket issue...
I wish I could comment the same thing
I saw you were getting read errors when connecting. I had the same and a latency setting of 1 on the serial port. Turns out that a latency setting of 1 is too short. I increased mine to 8 and it was 100% reliable after that.
Just had the EWS delete done by Evan. Car started right up! Thanks again Evan!
I have the same issue do you have contact info for him?
@tony6261 message me on instagram @evangoyuk
@@EvanGoyuk how much do you charge to do this I have an 2003 bmw 325i e46 v6 and my car key transponder is telling my ews system that the car is not going to start I need help
Love the new outro. It's cool and flashy without being annoying.
I have a 2003 325xi with a blown 2.5 motor! I want to replace it with a 3.0 motor from a 2004 X3! After the swap, what would I have to do to get it fired up?
I need to do an EWS delete on my ms45. Any chance you could walk me through exactly the order of how to do everything. I'm planning on just doing this with the DME in the car and grounding to the strut tower or something.
Message me on instagram @evangoyuk. The process is completely different for ms45
Are you still programming dmes
Great video! Do you still provide this service? I have a race car I'd like to eliminate the ews on.
Yes message me on instagram @evangoyuk
Are you grounding pin 104 straight from the Battery Negative post?
Can I send you a different DME from ( e39 540i 2002) and swap it with my 2002 e39 540i ? Thanks. Great video! Sorry for my ignorance? I do all basic maintenance on my e46 and e39 540 but really NO knowledge on computers.
does the vin need to be changed for it to run in the car with that tune file ?
I have a us 2001 740il. You mentioned you do this for a fee. How much would it be for you to send me replacement parts with ews deleted ready to plug and play?
Message me on instagram @evangoyuk
Deleting the DME is similar to bypassing the EWS? Also is it safe to drive/operate the vehicle
You perform ews delete on the dme! Message me
On instagram if you want an ews delete
Hi, I have a 525i E39, should I use the E46 325i patch or the e39 530i patch ?
The only required hardware is the Godiag gt100 box and the K+DCAN cable ? Thanks
Hi, my girlfriend bought a 98 540i with out me checking it out. It's a basket case it's had treakers working on it but so for I'm seeing it looks like ews problem what would you charge to flash my ecu?
Hello friend, when removing the EWS from the DME, then it is not necessary for the EWS module to remain connected?
No
Can you sync or reprogram my DME and CAS together remotely? I have a 2007 BMW 525I 3.0l N52. I bought it with this issue. Keys work to lock and unlock but no crank no start. Replaced battery with good battery, replaced starter, fuel pump works and engine is able to turn independently from the push to start button. Car seemed to be without a battery for a few months.
Yes message me
So I have a 2002 BMW 530i with ews3 what IC codes and all that what I need to bypass the immobilizer or how much would it cost for you to create those things that you were talking about and code mine so I can just plug it in and it does it
Message me on instagram @evangoyuk
Can I send you my DME/CAS (new and old) and you write so my EGS will allow me to shift into gear? E70
Yes! Did you replace your CAS?
@@EvanGoyuk I bought used dme and cas since old key broke and doesn't work and installed them and car starts fine but won't shift out of park. Then researching I realized egs is tied in as well. Guy never responded if he had the egs. I've been trying to use bmw scanner and a cable but it won't read the modules. And on the adapter pins 7-8 are jumpers but so are 8-16 not sure if they're supposed to be.
I need to read egs module. No 7 and 8 are not required
My DME is probably dying, I have multiple cylinder misfire a shadow code on control unit self test. I am looking to get a used DME (preferably low miles donor) programmed it to my VIN and with latest software update. Its a daily drive car and probably do not want any fancy mods and strain the 150K+ mile old motor. I do not mind the EWS delete, in fact that could solve my no intermittent no crank no start issue on hot weather days. I dont think people would want to steal my 19 year old car. I dont want to risk doing it on my existing original DME . Can you help?
Can this be done on a MSD80? I have a 335i that’s giving me trouble I’ve replaced EWS, DME, and key all synced together and still car is doing nothing. My next step is to try to delete the EWS if possible.
No ews delete is possible but I can fix your issue! Message me on instagram @evangoyuk
Thank you so much I just bought an M3 that someone tried to steal and ignition was replaced and wouldn't start and is missing silver ring I had no idea that sent the signal so this is what I'm going to try I used your Amazon link to order the cable thank you so much for all your great video's
Does this disable the immobilizer function? If not can we delete the immobilizer function? Like for a designated drift car or track car?
It does disable the immobilizer
@@EvanGoyuk awesome Ty
Can you delete EWS on a 2005 - 2006 E83 X3 I think it has the MS45 if so please briefly explain how. Thanks.
Yes
@@EvanGoyuk I have an extra DME out of a 2006 E83 X3 M I would like to get it to plug and play without the EWS because in 06 they went to that Ews 3.3 and I'd have to change the EWS from that other x3 and reprogram a key that I have for that ecu.
@@EvanGoyuk I have a 2005 E83 X3
What is involved in deleting the EWS on a MS45 DME
Message me on instagram @evangoyuk
Does this tutorial and tools can be use on an E60? Does it exist for the E60 community? Thanks
E60 called ews delete
Would I be able to grab a used DME from a junkyard, delete the EWS, and be able to plug it into my car no problem? I'm having sporadic misfires from some ignition coils not receiving signal. Can't tell if it's a DME or a sensor issue. Thanks!
Yes but vin on dme would be different
You video is very interesting and helpful. I have a question: my ecu is a bosch for bmw e46 318i, which pin and which ic do I ground to put on boot mode? And the processor is covered with a sticker.
Dm on Instagram @evangoyuk. I can help you remotely
Neeed helppp , have a r53 mini . Is the process the same to remove ews ?
Message me on Instagram @evangoyuk
I have price question. Im fixing to undertake a project. And i need to essentials in the dme working. Engine and transmission. Doing a complete drivetrain swap.
I tried this with a second DME from the wrecking yard. Loading the files onto the new DME seemed to go fine. Car cranks, but does not start. Is there some additional detail missing from this video to actually get this done. INPA reports 2 errors "115 TPS-Adaption" & "128 EWS-Transmission/-Parity"
Advise on what I need to to?
Message me on instagram @evangoyuk
Hi Evan I got a key from BMW that will turn the dash lights on etc but won't start my car? Previous owner must of used the BMW ews slot so when BMW have done my key it's useless basically. is there anyway to get this key working again by changing the ews slot etc? Any help would be massively appreciated
Its a BMW 2004 E46
Hello, sounds like the key wasn’t programmed. Get a programmed or maybe you need ews. I may be able to ews delete. What model?
I would be very interested in your advice about buying another one and having it sent to you and your cost to program it to my vehicle
Hi Evan thanx for AL ur info it really helps us.
I'm from south Africa. I have a bmw e46 m43 engine 1999 model. My icu have burned,i bay new one from ebay.bay new key, ignition and ews from scrap yard. Install everything but Wil not start. What do u think is the problem.
Mine did not work either, I am now reading the comments and it seems like this does not in fact work.
I have a 04 r53 mini Cooper S with the EWS3+ system a short at the starter signal wire fried the EWS module would this delete process work or how much to send it to you for you to do it and what is the turn over time it's my only car and I'm in a bind need something done fast
Message me on Instagram @evangoyuk or email me at egoy936@aol dot com. I can have this same day turn around
I'll give you a good spare ms 40x dme to add my vin, delete ews, add pop and bangs, increase throttle response?? One dme is from a 2000 323i, the other is an 02 325i. Mine is a 330ci however so I have 3. But won't be modifying my stock automatic dme until I learn myself with a laptop I don't have yet.
Message me on instagram @evangoyuk
@@EvanGoyuk message sent. How long it take you to typically reply?
Any advice for a e31 owner who desperately needs a solution to fix an electrical issue??
I got confuse - the VIN section hex code from new downloaded .bin firmware it's a different from the .bin from the back up on DME... if flash directly would that change the VIN that comes with the new firmware?
Is there anyway I can send the ECU out to you and have the immobilizer shut off?
Yes message me on instagram @evangoyuk
Hey morning just checking your video and man it leaves me hope that my e39 has life yet would want be the charge to eliminate ews for my vehicle and of course how soon can we get it done please reply ASAP
Message on Instagram @evangoyuk
Hey Evan, I have a 2006 mini that was in a flood. It has a code for wrong code from the ews4. Can you do a ews delete on the dme? Also does the mini need the footwell module to start. The car cranks but doesn’t start.
What dme
Do you need the number off the dme?
Hi I got a 323i e46 last time I used battery pack to start. Idled for a minute then just died. Cranks but won't start. Think I need a bench setup it's ms42
Hello I have a 2010 BMW X5 E70 that needs a new DME and coded. Are you still programing DME's and or selling them pre-programed. Also I'm interested in the EWS Delete.
Thanks, ShawnRamone
Hello message me on instagram @evangoyuk. Newer BMWs don’t support ews delete but I can help
I have a 2004 BMW X5 4.4 I need my DME reprogrammed and if love to have the news delete can you help me Evan this thing will crank all day but obd scan says the transmission and dme aren't communicating
Message me on instagram @evangoyuk
Would i need to flash or delete my ews if i did a engine replacment? Does the engine hold a chassinr or something? I replaced my engine, got no fault codes but the car wont crank :(
No as along as dme and EWS is the same.
You may have fried you ews. Message me I can help. @evangoyuk
What would I need to proforma this or do you provide this service
So on you Mac are you just using boot camp?
Hello Evan, I did all everything as you instructed in this video. The car turns over the started but the car itself does not turn on. What could I have missed??
Message me on instagram @evangoyuk
@@EvanGoyuk thanks so much for the reply. I have sent you a message on Instagram.
Great video my gf lost key so i used screwdriver on ignition but not starting i took off ews crank no start i would love you to delete an tune my dmi how much an how long
Message me on instagram @evangoyuk
@@EvanGoyuk ok
I have a 1997 bmw z3 and I need to replace the ignition and the ecu
But I heard that if I do that I have to reprogram everything I can’t just plug and play?
Correct dme which is the ECU needs to be programmed
If I need to get a ecm flashed from a e39 525 to m54b30 software how do I get in contact with you?
Yes
Is this possible on a N42B18? Because I’m not finding the file for the engine
Message me on instagram @evangoyuk I can help ews delete this engine.
DOES THE DME HAVE TO BE ON A BENCH IN ORDER TO CHANGE THE VIN WITH TUNERPRO THE WAY YOU DID IN THIS VID?? IN TUNERPRO THERE IS 13 BOXES BUT THE VIN IS 17 DIGITS. DO I PUT THE LAST 13 NUMBERS OF THE VIN?? IM TRYIN IT TODAY!! BRILLANT INFO!!!
No bench mode need. You need to convert the vin to hex then enter it!
Awesome thanks, I converted the vin to hex but do I put in the complete hexvin in the first box under box20? Or second Box 2C etc? Which box do I put the vin in? There’s 13 boxes?
Hi Evan, we have an EWS where for what ever reason it has lost all of its data when we read it during a new key addition. Whats the best procedure for adding a 2nd hand EWS to an existing Mini 2006. Thanks
Message me on instagram @evangoyuk
Hi,I have a 03 bmw 540i ,I need the ews deleted it does not crank or start,can you do it for me,how long would it take and how much,thanks
Message me on instagram @evangoyuk
Im having some echo errors when connecting, are you familiar with this fault in jmgarage?
I would like to do a EWS on my 1998 bmw Z3 m52 2.8 . Can you help me out with that?
Yes message me on instagram @evangoyuk
Hey I have a 1997 318i I bought that the keys had been lost . I've looked and bought alot of different things that were suppose to work but nothing I've bought works. If I send you the ews2 box and dme box would you be able to do a ews2 delete
Hi, I have an old track car, I have an engine and ecu from 530 bmw dde5, would it be possible to bypass immobiliser in due and would it start the car ? Cheers
Message me on instagram @evangoyuk
Can you do an ems delete on an r53 mini cooper? If so, I'd like to get mine to you,
Dang that thing looks pretty cool
Can you do one on a 2004 Rolls Royce Phanton?
Yes! Message me on instagram @evangoyuk
Or what’s your email
Would you mind telling me how to know which DME I have? Or how can I tell which one I have, please? Also, your Amazon store does not show the bench wiring setup for sale, it isn't even listed. Thanks
What model is your car? I can tell you. Amazon does not sell them as I make harness myself
@@EvanGoyuk I have a 1998 740iL (e38). If this has the correct DME, how do I go about purchasing a bench set up from you?
I assume by the absence of a reply that my DME is not one of the models that can be done using this method. Also, I have seen that the ms4.x are for the inline 6 cylinder engines and not the V8's. Oh well, it looked promising at first.
Are you still selling the parts you mentioned in the beginning of video to do this?
Yes
@EvanGoyuk great so simply put, I bought a 2006 BMW 330ci. I was told keys was made but car still didn't turn on. They did something with the intake and it fired up to prove the motor is good. The guy said he thinks it's the box that houses the key pass codes because you can it can only hold 6 remade keys in a lifetime? I don't know about that. So you mentioned immobilizer bypass and you spoke on the key password box to just using a cut key. What do I need to buy from you to make this an easy process to foxing the cars issue?
What do you charge to change the vin and delete the EWS?
will "BMW scanner 1.4.0" work with this process?
I’m interested in purchasing a dme from you if you still provide that service. Would I be able to get a dme with ews delete & reprogrammed to my vin?
I have a 2002 bmw 325i
Got key replaced, no crank no start, when I remove the plug from the EWS 3 and put a 30 amp modified fuse it cranks with the key but doesn’t start.
Need help, would this work for me?
Yes message me on instagram @evangoyuk
You need an ews delete! Message me on instagram I can help
Can you do or perform the ews delete on a E60 ON A BOSCH MOTRONIC DME for a 2004 E60 545I
I have a E53 diesel M57 motor, but the only Firmware files are for M54 petrol motors in the E53 X5. Can I use the M54 files to remove the EWS from my M57 diesel powered X5? Or is there a M57 version for the X5 MS43 firmware?
I can help message me on instagram @evangoyuk
Can you help me. Bought an m54b30 out of an X3 , no harness or ECU/dme. Installed motor with original 330 computer and harness. It starts but won't drive, automatic transmission
Message me on instagram @evangoyuk
Evan can you do a Mini cooper EWS delete- 2006 S
Yes message me on instagram @evangoyuk
Hi man is posible modified m54b25 ? I have a ms43 oldest soft I can change soft to ms430069?
Yes
how can we delete EWS if our car has 0037 bin???? the community patch list is only for 0069...is it as simple as updating to 0069??
Yes
@@EvanGoyuk so, flash stock 0069 bin, synce ews. Flash patched 0069 community bin with ews delete and not worry ima be setting while my ews decides to work or not??
HI there Evan I'm Manny and i have a 2013 bmw 550i n63 f10 WBAFR9C56DDX80982 and recently i had to replace the transmission,battery and the key fob battery and now my bow will crank but won't start. The car has been sitting for quite a while on the car hoist because was hard to find the same type transmission for this car I do have a autel MK 808 diagnostic reader and i got and ews immobilization code and also a f2108 typeof code don't remember because i disconnected the diagnostic tool. Can you help on how to fix this problem. I'm guessing the second code the Bf2108 was generated by the EWS code
Message me on instagram @evangoyuk
How do I reach out to you to perform this on my DME?
Message me on instagram @evangoyuk
Can you do one with the MS4X flash tool and show sap, cat delete? Also when do the definition files come in? Do you need the firmware, patch list and definition files?
How about the e53 4.8is can only be read in boot mode can this read it
What dme?
Me9 bosh
How much is it to remove the ews from the dme? im at a stand still and need my car asap
Message me on instagram @evangoyuk
Can you do this on an E36 1996 328i Euro?
Yes message me on @evangoyuk on instagram
hey im having an issue where the car wont crank or start. i replaced starter and can maually crank it if i touch the white cable to positive terminal. but it wont start. is this an ews issue or the dme losing sync? if you can help i would very much appreciate it.
Message me on instagram @evangoyuk I can fix the issue
@@EvanGoyuk what is your Instagram handle
Will this work with 06 Range Rover L322? it uses some left over BMW parts, i don;t have any problems right now, just one key and want to make more
Hi, will this work for an E46 M3? My car won't start due to EWS kicking in due to battery disconnect.
Can do an EWS delete on my 2007 530i MSV70 ? How can you be reached....is there an address I can send you my DME to ???
Yes message me @evangoyuk on Instagram
i have a 98 318 ti i am having the problem with the ews. i put a new column in because the column as damaged... it has the original ignition switch from my old one installed back into the new one..so my car will not even crank nor turn over.. i took the module loose and jump the two thicker wires and the car will turn over but no spark nor fuel..is there a kit and a program to make this bypass happen..what im asking is can you help with the info i need to bypass the system properly..thank you
if im on 0037, just follow what you did and itll update and get rid of ews at the same time? or do i need to change the vin to whats on my ecu?
i think im overthinking this. but ive already bricked my car once.... and "updating" from 0037 to the latest, well there isnt much out there really.
How can I get ahold of you to send my dme for this also if my car isn’t reading my ews would the delete fix that
Message me on instagram @evangoyuk
When you say turn it on at 6:30 do you mean turn the key position 2 when grouding?
Are you still tuning computers?
Yes! Message me on instagram @evangoyuk
Awesome video. Worked right away
How do I send you a new ews to code to my car? How do I contact you, Evan?
Message me on instagram @evangoyuk
Hi Evan, i would like to order a set of cables for the test bench. My car is a 2005 BMW X3 2.5i automatic. How much sir?
How much do you require to reprogram a ews, I've got a no crank no start, key is good.. starter turns over, so it has to be the ews.
good day i have bought a second hand dme and ews for my 318i e46 but i still have my old key and ignition in will that be a problem
Evan When I open the patch for Immobilizer it says error. Exactly what is happening here
Message me on instagram @evangoyuk
Is the process similar if I need to replace my water damaged DME with a replacement DME?
No but I can assist
@@EvanGoyuk how do I contact you for help? Email?
Instagram @evangoyuk
By any chance would you know if you were to get a DME from the junkyard and rewrite your vin to the car and do the EWS delete would it interfere with smogging your vehicle as it’s a daily, not a track or drift car, I’m in CA and have strict smog rules
No it will not interfere
I followed the guide for a bench set up but cannot connect.
I don't have Pin 3 on connector 1.
Do you?
You may need to add a pin
How can I contact you about sending me dme with the ews delete?
Yes email me which is in my about page under business inquiries or message me on Instagram @evangoyuk
@@EvanGoyuk how much to eliminate ews
On e46 330 and where are you located
Can this work on freelancer mk1 with td4 engine...same engine with BMW 320d