Your video and explaining was very concise, comprehensible and very straight forward, speaks clear and detail, I was a little frustrated during re-assembly, but your instruction got me out of the ditch! looking forward to see more youtube from you in the future! Thank you so much! 💡💡💡😅
Excellent video. Just got a hi capa clone today and this was a HUGE help in taking it all apart and reassembling. Almost lost the pins for the safety mechanism, but thank god they were on my desk, just hidden since I have a black desk mat and they're black parts haha
Brilliant Vid! Always worried about taking my rifs apart but this showed me how easy it really is. Hop up adjusted and back to working order in seconds! Thanks for the helpful video!
Great vid. I just got an Army Armaments 1911. Worked great first 5 or so mags, then I tried a hop adjustment and now it's messnig up, feed nozzle sticking in the barrel, all kinds of fun. Gonna need all the help I can get so these kinds of vids are much appreciated!
Thank you so much man for this video, the mainstream airsofter tech vid wasn’t able to explain as much as you were able to. this helped me save my wallet trying to fix my hi capa😊
Thanks for the video very very helpful as I have no clue what is what 😁 my gun Entire inner and outer barrel is wobbly is that how they are os main is defective
My slide lock pin is loose and sloppy when fully inserted, is there a grub screw or compression washer on the lower receiver to make the slide lock pin tight when fully inserted? Cheer Stew
Hi Thank you very much for this video. He helped me a lot to get to know my hi-cap. My son and I are new to ASG. I recently bought a used Hi-CAPA 5.1 from Golden Eagle. Unfortunately, there is something wrong with her. It cannot be reloaded. It is impossible to engage the left safety, move the barrel backwards or pull the hammer back. The trigger is also blocked. I took it apart according to your video and put it back together, lubricating it with BRUNOX. After installing the barrel, it can be undone but only once. After pressing the trigger, the hammer moves vertically and the weapon locks again. After verifying the operation of all elements, I found that when I lower the right tongue in the gun body slightly (1 mm) with a thin knife, it unlocks, but only once. The gun looks almost new and has no major signs of use. Nothing is cracked or broken. I checked all its elements. Can you suggest why this might be happening? Any help would be appreciated.
Thanks for the Video, though I do have a question and maybe you can help So I use my Vorsk Hi Capa with an HPA Mag Adapter, at some point it just straight up stopped shooting, put in a new Valve Knocker ( the original seemed a bit dinged up ) and changed the Valve on the HPA Adapter to a Neo R, worked great until the Valve Knocker didn't reset properly when the slide racks back( so when the little metal piece pushes the spring down ) gonna edit this when I try out the old Valve Knocker again with the new Valve to see if that fixes it and it's just the new Valve Knocker, but what might be causing this? The heavier material of the new Valve Knocker maybe?
The grip safety on my TTI JW3 2011 is not working (I can shoot the gun without pushing on the beavertail). Does anyone have any idea what the problem could be and/or how to fix this? I read somewhere that it could have something to do with the leaf spring but I'm unsure. (I'm pretty new to airsoft).
@mweme1831 u know what you could have done while that was happening? (i know cuz it happened to me), if u put in a full mag in with gas and bbs, the trigger won't work, buy the second you put a full mag in and hit the slide release, it will go full auto because there's nothing to stop the hammer after each shot.
yo! Do you got any fixes for a hammer that is stuck down completely, ive been trying to fix this problem in and out for a long time now, it the hammer is fine until i have to cock it down to put in the left safety switch, and then it is stuck down, the only way the safety goes in is if i pull the hammer down, which then, makes the hammer stuck!!! Please help, keep in mind, this is all before I put in the leaf spring, and put the frame in the grip etc…
With running out of gas, try purging the mags as you may have an air lock inside it preventing you from getting a full fill. With the random burst either your sear spring needs to be re bent or your disconector is wearing down and needs replacing
Finally I found these helpful video no music very clear showing each step guide in the video thank you so much well done mate
Only place on the entire internet I could find a fix for my Airsoft, thanks a bunch mate
Glad it helped
Your video and explaining was very concise, comprehensible and very straight forward, speaks clear and detail, I was a little frustrated during re-assembly, but your instruction got me out of the ditch! looking forward to see more youtube from you in the future!
Thank you so much!
💡💡💡😅
Bought my first boneyard pistol off a guy this video helped wonders in the restoration of it 10/10
DUDE THANKS SO MUCH!!! I spent one and a half hour on trying to fix something. Then came to this video and you solved it for me thanks again dude!!!
That's awesome you managed to fix the problem 👍
Excellent video. Just got a hi capa clone today and this was a HUGE help in taking it all apart and reassembling. Almost lost the pins for the safety mechanism, but thank god they were on my desk, just hidden since I have a black desk mat and they're black parts haha
glad it helped you, Yea be careful about those pins, iv spend hours looking in the carpet for them
Disassembled my grip for some stupid reason and couldn’t get it back to what it was, video was very helpful and got me to fix it
Appreciate the video with the good quality of the internal. That close up of the spring was a life saver. 😅
Glad it helped. Yea getting thoes close shots was not fun 😂
Brilliant Vid! Always worried about taking my rifs apart but this showed me how easy it really is. Hop up adjusted and back to working order in seconds! Thanks for the helpful video!
happy to help, glad its fixed and working
Great vid. I just got an Army Armaments 1911. Worked great first 5 or so mags, then I tried a hop adjustment and now it's messnig up, feed nozzle sticking in the barrel, all kinds of fun. Gonna need all the help I can get so these kinds of vids are much appreciated!
Thank you for this video! I'm planning on changing the knocker and sears to steel ones and this helped a lot.
Thank you so much man for this video, the mainstream airsofter tech vid wasn’t able to explain as much as you were able to. this helped me save my wallet trying to fix my hi capa😊
Glad it helped you out 👍
Thanks for the video. I am planning to get my first hi capa soon. It's always good to know how the internals work.
Happy to help
Thank you. I was having trouble removing the barrel
Thank you finally got together my AW 😅😂
thank you, im saving this video for reference
Happy to help
Bro, thank you so much for this detailed video❤ i needed this so much. Thx thx thx thx
Happy to help
Thx!
No problem
My slide is getting stuck in the lock position, on the handle, when I put it back together. Any advice on how to fix this?
do you have the mag in the gun? If u have the mag in the gun and its empty the slide will lock back
@@sixt768 I’ve fixed it now. It was because the little leaf spring wasn’t properly in place.
@@imhere8474 Got it
Cara que vídeo incrível, parabéns 👏 ganhou um inscrito.
Thanks for the video very very helpful as I have no clue what is what 😁 my gun Entire inner and outer barrel is wobbly is that how they are os main is defective
My slide lock pin is loose and sloppy when fully inserted, is there a grub screw or compression washer on the lower receiver to make the slide lock pin tight when fully inserted? Cheer Stew
Nice fun! Can you tell me the brand name of this gun?
I need help with my hi capa.
Everything works but when i shoot the hammer doesnt go all the way Forward.
Any ideas what could cause this?
Hi
Thank you very much for this video. He helped me a lot to get to know my hi-cap.
My son and I are new to ASG. I recently bought a used Hi-CAPA 5.1 from Golden Eagle.
Unfortunately, there is something wrong with her. It cannot be reloaded.
It is impossible to engage the left safety, move the barrel backwards or pull the hammer back. The trigger is also blocked.
I took it apart according to your video and put it back together, lubricating it with BRUNOX.
After installing the barrel, it can be undone but only once. After pressing the trigger, the hammer moves vertically and the weapon locks again.
After verifying the operation of all elements, I found that when I lower the right tongue in the gun body slightly (1 mm) with a thin knife, it unlocks, but only once.
The gun looks almost new and has no major signs of use.
Nothing is cracked or broken. I checked all its elements.
Can you suggest why this might be happening? Any help would be appreciated.
Thanks for the Video, though I do have a question and maybe you can help
So I use my Vorsk Hi Capa with an HPA Mag Adapter, at some point it just straight up stopped shooting, put in a new Valve Knocker ( the original seemed a bit dinged up ) and changed the Valve on the HPA Adapter to a Neo R, worked great until the Valve Knocker didn't reset properly when the slide racks back( so when the little metal piece pushes the spring down ) gonna edit this when I try out the old Valve Knocker again with the new Valve to see if that fixes it and it's just the new Valve Knocker, but what might be causing this? The heavier material of the new Valve Knocker maybe?
Thanks❤
The grip safety on my TTI JW3 2011 is not working (I can shoot the gun without pushing on the beavertail). Does anyone have any idea what the problem could be and/or how to fix this? I read somewhere that it could have something to do with the leaf spring but I'm unsure. (I'm pretty new to airsoft).
i need video of m1911 kjw wanna diassembly evertyhing and repain
My trigger doesn’t really want to reset once I dry fire??
I put the leaf spring back in the grip, but when I cock the slide back the hammer doesn't go down it just springs back up.
I fixed it
@mweme1831 u know what you could have done while that was happening? (i know cuz it happened to me), if u put in a full mag in with gas and bbs, the trigger won't work, buy the second you put a full mag in and hit the slide release, it will go full auto because there's nothing to stop the hammer after each shot.
Main shooting 270fps how you increasing fps on those guns
yo! Do you got any fixes for a hammer that is stuck down completely, ive been trying to fix this problem in and out for a long time now, it the hammer is fine until i have to cock it down to put in the left safety switch, and then it is stuck down, the only way the safety goes in is if i pull the hammer down, which then, makes the hammer stuck!!! Please help, keep in mind, this is all before I put in the leaf spring, and put the frame in the grip etc…
If you install the leafspring after can you pull the trigger to relase the hammer?
Hey my gun dosent have the small hole to remove the slide
Thanks sooo much.
That's OK, glad it helped
it seems like theirs no wiggle room for my inner barrel and hop up to slide out of my outer barrel, i feel like i’m doing something wrong please help
What make is your pistol?
I can’t push out my pin any help?
Which pin do you mean?
My gun shoots in random bursts and runs out of air quickly. Do you have any idea of what the problem could be
With running out of gas, try purging the mags as you may have an air lock inside it preventing you from getting a full fill. With the random burst either your sear spring needs to be re bent or your disconector is wearing down and needs replacing
@DTWAIRSOFT Thank you, I just finished reconnecting the searspring, and it performed better, so I might need to work on it a birmore
@@Notsofunnyman217 happy to hear its working now
hey im unable to remove the pin in the grip connected to the magwell, what did you do?
You need a small flat head screwdriver then push down as far as you can turn counter clockwise, it will only turn a little not all the way
@@DTWAIRSOFTi cant
What nozzel do you use
In that video it was just the stock nozzle I used