You can add more shortstrokes with the 5.1 guide plug by either; unscrewing the guiderod putting everything together and then screwing in the guiderod from the front, or you can put the guiderod in before you put the blowback unit in.
@@ValiantAirsoft found an easier way for more shortstroke and be aible to fieldstrip. cut the shortstroke buffers. Therefore u can put them in after u assembled everything. I found out u always have to pair 1 complete with 1 cut one, otherwise the will get loose.
That gun is straight out of Destiny 2. Looking awesome, hope it does better now. BTW thankyou for your advice on the last video, upping the fps fixed the problem although, I wish I would have just bought an hpa tapped, m4 adapted hi cappa. Would you rather choose a Lancer tactical strke. Or a jag arms pistol?
I have the same sight set up you “DO NOT” need to hold spring it in place when fitting the BBU. Just fit the BBU (without nozzle) then slide nozzle spring in place for the top, put sight in place and do up the sight screw. (Can even fit the BBU screw as soon as the BBU is in the slide with no nozzle spring installed)
hey i wanted to get into speed soft and i just bought a lancer tactical stryk hi-cappa and i want to know what upgrades should i put on it to make it speedsoft ready?
may be a noob question but would a base tm be better or a gold match for the tac rail. I know thr base tm comes w one but i heard it doesnt look as clean
Hi mate, great video as always, I bought the LA Capa TDC unit for my Army Armament JW4 Pit Viper hi-capa, I installed it and everything seems in place, the nozzle seems to be making good contact with the bucking but I bb's practically roll out of the barrel and doubble feeds. Is there something I can do? I really want to use this TDC uinit. Thanks for all your guides
Im completely new to air soft and im interested in buying custom parts for building a hi-cappa but LA cappa hasn’t restocked theres nothing and I can’t buy parts anyone know when or even if they restock
Restocks happen semi regularly, there was just a large one about two weeks ago. There will be more but hang tight. I recommend getting a base marui and upgrading what you can as things come in stock.
@@ValiantAirsoft how does the TDC chamber perform compared to the AM chamber? I'm using the AM chamber and very interested switching to the LA Capa TDC chamber.
Trigger pull weight is a combination of the hammer spring strength, sear spring tuning, and the hammer used. I don't go for the absolute lightest pull personally. I have the stiff spring and 4 copper washers.
Hey , so i've been running into an issue . I have bought a Tracer unit , its a Bifrost from Acetech. I am unable to threat it to my hi capa 5.1 . Any solutions ?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I like how that hammer doubles as a tuning fork. I am getting one.
That hop up unit reeeaally got my eye! Got problems with my AM brass unit so that is def a future upgrade!!
Be sure to get one! They are GAME CHANGING!
Awesome video! Glad you are loving the new TDC hopup!
Mine just came in today shooting AMAZING
Do you have a 5.1 hopup for gel blasters?
@@magicmanspaz you do understand that airsoft hopups are completely different from gel blaster hopups, right?
@@Wyhaq Only new to this. Only just found out the wheel is removed on the gel blasters. And the hopup is done by holes or slots on end of barrel.
your name is familiar..
You can add more shortstrokes with the 5.1 guide plug by either; unscrewing the guiderod putting everything together and then screwing in the guiderod from the front, or you can put the guiderod in before you put the blowback unit in.
Have fun field stripping
@@ValiantAirsoft found an easier way for more shortstroke and be aible to fieldstrip. cut the shortstroke buffers. Therefore u can put them in after u assembled everything. I found out u always have to pair 1 complete with 1 cut one, otherwise the will get loose.
great vid, nicely done.
that's a sick piece!
i got 3 buffers and two washers on my 5.1 before relizing i forgot a washer......pain
That gun is straight out of Destiny 2. Looking awesome, hope it does better now.
BTW thankyou for your advice on the last video, upping the fps fixed the problem although, I wish I would have just bought an hpa tapped, m4 adapted hi cappa. Would you rather choose a Lancer tactical strke. Or a jag arms pistol?
Lancers are supposedly marui compatible but I haven't tried either
ok not ganna lie that hi cap looks awesome
Have you tried using fixed Outer barrels?
Lucky ur bbu has a good bucking to nozzle seal mine just doesn’t stick at all
What fiber optic is that?? Looks so dope
I mean, did he have to slide it back to you though? ☠️
I wanted him to lol, round isn't over until it's over.
👺🔥💯
@@ValiantAirsoftyou don’t go down without a fight lol
Yea when I saw the video I cringed because I knew that red got some scratches
Man I’m building a hicapa like your but colors are flipped
What type of tools do you use I have trouble finding the right screws for mine
What grip is that
I have the same sight set up you “DO NOT” need to hold spring it in place when fitting the BBU. Just fit the BBU (without nozzle) then slide nozzle spring in place for the top, put sight in place and do up the sight screw. (Can even fit the BBU screw as soon as the BBU is in the slide with no nozzle spring installed)
Good tip
what are all the parts in this build can you tell me
In your opinion, does hammer regulator really affect the performance?or its more of a preference?
Without getting way too deep into it, It's a mix of both.
hey i wanted to get into speed soft and i just bought a lancer tactical stryk hi-cappa and i want to know what upgrades should i put on it to make it speedsoft ready?
Short stroke it. If you need more accuracy upgrade the bucking and that's a strong start.
may be a noob question but would a base tm be better or a gold match for the tac rail. I know thr base tm comes w one but i heard it doesnt look as clean
The gold match has a better mounting rail but the slide rails can be iffy some times
Hi man love the vides❤
lithium grease could help reduce your alumunium to alumunium/metal friction. please share this tips, ive been use it over hundred round.
Supposedly lithium/silicone grease causes galling with metal to metal contact. Not sure whether that’s accurate though
What screwdriver set do you use?
give me a link to were you bought it
When the hammer makes that sound its deforming/damaging your frame.. should install a hammer protection pad so it doesnt break
where did you buy this hi capa piease give me where you bought it
What length should i get an inner barrel for my 4.3?
If you have a thread adapter you can put a 113mm 5.1 length. otherwise I think it's 96mm or so?
@@ValiantAirsoft Thanks!👍
Hi mate, great video as always, I bought the LA Capa TDC unit for my Army Armament JW4 Pit Viper hi-capa, I installed it and everything seems in place, the nozzle seems to be making good contact with the bucking but I bb's practically roll out of the barrel and doubble feeds. Is there something I can do? I really want to use this TDC uinit. Thanks for all your guides
Sounds like the nozzle is a little too long and pushing the bb past the bucking patch. Is it the stock nozzle?
Slick!
Im completely new to air soft and im interested in buying custom parts for building a hi-cappa but LA cappa hasn’t restocked theres nothing and I can’t buy parts anyone know when or even if they restock
Restocks happen semi regularly, there was just a large one about two weeks ago. There will be more but hang tight. I recommend getting a base marui and upgrading what you can as things come in stock.
The reds don't see to be the same shade. The color matching in hue is off putting, is this just a camera effect?
There's a slight difference under direct light, the old slide was a slightly different shade as well.
What Doas harder or softer nossel springs make a differece
Faster return speed for short stroking
When the loading nozzle sticks, didn't it mean it increases the possibility to misfeed?
If you mean the compression between the nozzle and bucking, no. If you mean when the nozzle does not retract into the BBU during cycle then yes.
@@ValiantAirsoft how does the TDC chamber perform compared to the AM chamber? I'm using the AM chamber and very interested switching to the LA Capa TDC chamber.
I went over it in the video
@@ValiantAirsoft and how does the LaCapa chamber works after a view weeks? Is it durable and more accurate than AM?
i have 4 buffers , is that too much for greengas lol
If it cycles then it's fine, doesn't matter if it's green gas or hpa
How much does it weight?
What do you use to grind down the rear sight screw? Mine is putting a ton of pressure on my nozzle.
A Dremel or file
Ok thank you!
hey man! whats your hammer spring power setup?
Stock in this one
@@ValiantAirsoft and for the competition gun? i have a power hammer regulator and im searshing for a lightest trigger pull without any light striking
Trigger pull weight is a combination of the hammer spring strength, sear spring tuning, and the hammer used. I don't go for the absolute lightest pull personally. I have the stiff spring and 4 copper washers.
How can i set my capa for this low recoil and have this speed is it about springand buffer?
slide weight and recoil spring strength
1 SINGULAR SHORTSTROKE? ARE YOU MAD? get 3 in there and once you open the hi capa do it from the bbu!!!
I'm maxed out on that guide plug 😂. The thick buffers are like 2 regular ones
@@ValiantAirsoft OK I didn't say anything then... I am blind
The frame looks familiar what is it called?
LA Capa competition frame
Hey do you know if any magwells fit?
They should, but I haven't tried one on it.
@@ValiantAirsoft someone said they don’t fit most magwells. Just wondering which ones do
Hey , so i've been running into an issue . I have bought a Tracer unit , its a Bifrost from Acetech. I am unable to threat it to my hi capa 5.1 . Any solutions ?
You need a threaded barrel
W
EPIC
Can I have help with my Airsoft pistol😢
Did the dr black slide get damaged? Or was it qc problem?
The slide was damaged
I believe this could be because it is 6063 and just very cutout, it is able to flex more easily than other slides.
最高かよ！！
What is the brand of hi-capa?
It's crazy how little effort you put into actually watching the video to see what is going on.
It would be better to have fixed outer barrel)))
lets go
How mch cost all items??
Yea fr wondering the sane
Gas guns have enough power to move the slide well, so those over cut off slide designs only make it more weak!. I don't like it
A harder aluminum would have been fine
@@ValiantAirsoft even so it's aluminum, which is why a complete slide without so many cuts is better
Factually wrong. Reducing the weight decreases cycle time and increases efficiency.
@@ValiantAirsoft but it makes the slide more susceptible to breakage and that kind of things, and that's a nono for me
Respectfully when has it ever broke, like who throws there pistols around, plus it looks cool
That is the ugliest pistol I’ve ever seen.
Lacapa slides are garbage