I am wondering if they make larger than a 32 pole motor for a washing machine ?? Would like to make me the same thing but a larger size. Nice work fella.
In these videos it should be noted that the reason for rewiring the stater coil order is to reduce the voltage output to 30VDC or less. If the motor is operated as a generator, as originally wired, it will put out 240VDC at around 300 RPM.. I have three of them stacked and run at over 1,000 RPM to achieve 420 VDC for my high voltage Solaredge inverter at night when the solar panels go down, because that is the voltage needed to charge the battery bank and operate the system off grid. I use the three stacked generator coils in parallel, operated from a 16 HP gasoline engine converted to operate on hydrogen. There is a way around the typical problems if you just pay attention, and it doesn't cost as much if you can make and operate your own system and processes.
Bought an LG stove, ice box, washer and dryer [expensive mistake], only the dryer still works. Anyway, been looking at the washer under the shed, will remove the motor assembly. I experiment with many different things and will do the same with the LG part. Thanks for the info.
YOU can use a specific solder just for aluminum metal. The flux is also different but works with aluminum Sir. My next question to you fella. How often does the motor come with Aluminum magnet wire from the manufacture Sir ??? What is the code for motor with aluminum wire ?? Thanks
They use aluminum to save money. Works just fine and code does not apply here. They just need to stay within the wire and former dissipation limits. We use a boat load of aluminum wire in the electrical trades and it's perfectly safe.
This is a 3 phase permanent magnet motor. It is simply a scaled up version of the very same used in all the latest brushless tools. They are driven by purpose built VFD and are very efficient.
Can you create a generator to power the eAhora M1P electric motorcycle? Its like a little Harley, without the engine. The motor is in the rear wheel, and the battery parallel to the ground, between the rider's feet. It makes a little platform, perfect for a generator.
Very cool, another way to spin that thing that would really be cool to see is with steam. With some fire wood and a fire place or wood stove in a remote cabin you just need to light the fireplace or wood stove and make some steam and you're lounging on the couch wating you favorite tv show. LOL You could also make an oil burner to heat the water to make the steam? This would a great portable generator design to take out in the wilderness, make it run off of oil and a wood burner attachment as well to setup on a camp fire. That would be great to have building a cabin out in an area without electricity. A million $ idea, you're welcome.
Motors like this were first developed by fisher and paykel in New Zealand in the 1990s. They have been used in NZ made top loader washing machines for 30 years. F and P was bought out by Haier in 2012 and these direct drive motors are used in some Haier machines. Looks like LG have licensed/borrowed the technology.
Likely around 170VDC after rectification but could be allot more depending on the rectifier configuration. If it is a voltage doubler it could reach 340VDC.
I don't know what you are talking about with the aluminum not being solderable. Superior flux and manufacturing makes both flux and solders specifically for the task. I have used them in the past and they are spectacular at wetting and forming fillets in the area of junctions. Superior 1260 or 1261 flux and their matching tin zinc alloy solder and you never need worry again. Also, charging a car battery at minimum RPM? LOL! You need more than minimum RPM for that. The unit you have there to regulate the variable output of the generator is called a buck/ boost converter. What you will actually want is a battery charger that accommodates various battery chemistries and incorporates MPPT to optimize the energy harvested from the generator unit regardless of RPM and voltage output.
It should be noted that any interface between copper and aluminum wire is a hazard which can oxidize and create a fire risk. Such junctions should be avoided!
Why would you reduce the power output of a stator from a washing machine motor why not leave it hook up other stators to it in Ceres and hook up a water wheel to create free power for your home or some way do power the generator to create power for the pump to pump the water to circulate the water from one Chambers another to make a waterfall constant to power the generator forever this is kind of generator I want to have I just need help getting the sucker builts we have different kind of washing machine motors here in America I haven't seen one like narrow stators the large size round like that here in America from a washing machine I think I need five of them war for the house what state is for the water pump system weather platform for one container of water to be while the other container is on a lower platform receiving a waterfall to turn the generator two new sections of pipes circulating the water from the bottom chamber to the top with a pump when it gets full from the bottom it blows out a short top pipe to turn the generator with water falling across the generating wheel blades the water will. in theaters like you show in their videos so I will need access to four stater what's the 5th grader running the water pump to circulate the power of the water to make power with a generators can a bicycle buy chain to physically turn the shaft yourself to create power in the 5th fifth stator to start off right now pump once it does so and the pump is turning the water wheel you can stop pedaling and get off the bike I want you to do is job instantly having power free energy you know I have to worry about running into a crow Showbox that will maintain the current throughout your home off the generator will it free energy be safe for your electronics in your house my house use 1:10 to 1:20 the other house uses 110 to 120 + 220 and I want this generator to be able to run at both houses is that possible to Toby Alfred turn off the outside breaker box we're only paid $10 a month to have the power on in case I need to flip it back on for any reason to run both houses put the turn it off and leave it off on the rest of the time and run off the free energy system that I want power both houses is this all possible with that type of plan free energy power plant using water power turn it into electrical powe need a great electrical technician wizard genius to help me destruct this device they were actually work for my homes PS I want to add on to my 11020 house and have 220 washer and dryer heat water and on command water heater built into the system to maintain a warm water for the winter time when it gets low freezing where I live in the Ozarks get your system from freezing up time to stop Frozen and solid ice so you can keep on running and making power throughout the winter as well as summer in a small shed for extra battery pack storage is this all possible send me an answer on that okay these are mine ideas and concerns and I'm not electronic electrical genius that I have ideas that might help a genius but I will take a genius to make it work haha without getting electrocuted in the process
This generator is now installed in "Pedal Generator" ruclips.net/video/i-C8pmqRwBw/видео.html
I am wondering if they make larger than a 32 pole motor for a washing machine ?? Would like to make me the same thing but a larger size. Nice work fella.
I am wondering if they make a larger than a 36 pole washing machine motor. Would like to make a larger generator to power things. Nice work fella.
Ok Bro,Keluar berapa amperenuntuk generator ini ,Trimakasih salam hangat
Make a big giant zero point UAP!
In these videos it should be noted that the reason for rewiring the stater coil order is to reduce the voltage output to 30VDC or less. If the motor is operated as a generator, as originally wired, it will put out 240VDC at around 300 RPM.. I have three of them stacked and run at over 1,000 RPM to achieve 420 VDC for my high voltage Solaredge inverter at night when the solar panels go down, because that is the voltage needed to charge the battery bank and operate the system off grid. I use the three stacked generator coils in parallel, operated from a 16 HP gasoline engine converted to operate on hydrogen. There is a way around the typical problems if you just pay attention, and it doesn't cost as much if you can make and operate your own system and processes.
Thanks for your reply. Do you mean 240VDC or 240VAC? and do you mean 30VDC or 30VAC? as he is rotating the generator it produces 50VAC in the video.
pls more info yes
That is utterly brilliant ... I had the "hybrid inverter at night" bit, but not the washing machine stator side! Thanks for posting...
@@nighthawkpsi2838almost certainly RobGrad means VDC...because it's rectified.😂
But what is the performance of your hydrogène motor? Hydrogène made from electrolitic, have a bad performance and use... electricity !
Thank you very much. You blew out my agony to build a recycled generator.
Thanks!! Subscribed and shared !!
Awesome!
Thanks for this great video, it saved me a lot of time and money by showing me what not to do! Thanks!
Класс, супер, удачи вам и здоровья
你是一位杰出的老师👍👈
Make two gen. Use flywheel, and conect it to that exercise bike.
Well made 👍🏻.
Glad you enjoyed it! Thanks for your support.
@@mrmightytiger7385how much watts it produced tho?
Could you describe what’s the model of diodes bridge?
I followed your project. Which is theexactily 3-phase rectifier? Thanks
Bought an LG stove, ice box, washer and dryer [expensive mistake], only the dryer still works. Anyway, been looking at the washer under the shed, will remove the motor assembly. I experiment with many different things and will do the same with the LG part. Thanks for the info.
Have you tried cleaning the inside of your dryer? Might also check the exhaust.
YOU can use a specific solder just for aluminum metal. The flux is also different but works with aluminum Sir. My next question to you fella. How often does the motor come with Aluminum magnet wire from the manufacture Sir ??? What is the code for motor with aluminum wire ?? Thanks
They use aluminum to save money. Works just fine and code does not apply here. They just need to stay within the wire and former dissipation limits. We use a boat load of aluminum wire in the electrical trades and it's perfectly safe.
Thanks Mike. @@mikeiver
Do washing machine motors have permanent magnets?
@@IowaKeith Only the brushless 3 phase units in the fancy feature packed energy saving types. Most are simple fractional HP shaded pole types.
Most smart washing machines use permanent magnets. They have been used for years now. @@IowaKeith
hello great work! are you using the original aluminum coil?
Yes, I'm using the original aluminum coil. Thank you for your support!
The milage per charge is not good also the 40 minutes charge, has be tested for safety.
How do you know if its copper or aluminium?
Can this produce up to 500W?
What washer did this come out of? I've scrapped hundreds of washers. Never came across one like that.
This is a 3 phase permanent magnet motor. It is simply a scaled up version of the very same used in all the latest brushless tools. They are driven by purpose built VFD and are very efficient.
Lg direct drive
LG Sidekick pedestal washer has one.
SC current?
Can you create a generator to power the eAhora M1P electric motorcycle? Its like a little Harley, without the engine. The motor is in the rear wheel, and the battery parallel to the ground, between the rider's feet. It makes a little platform, perfect for a generator.
Very cool, another way to spin that thing that would really be cool to see is with steam. With some fire wood and a fire place or wood stove in a remote cabin you just need to light the fireplace or wood stove and make some steam and you're lounging on the couch wating you favorite tv show. LOL
You could also make an oil burner to heat the water to make the steam? This would a great portable generator design to take out in the wilderness, make it run off of oil and a wood burner attachment as well to setup on a camp fire. That would be great to have building a cabin out in an area without electricity. A million $ idea, you're welcome.
Great idea!
@@mrmightytiger7385
Thanks, I like your videos.
Stirling engine!
How many amps or Watts are possible with this 3 phase generator?
I would say half the power of the drill so maybe 200-250 watts.
please tell me which washmachines uses this motor? brand or model...
Lg direct drive
Motors like this were first developed by fisher and paykel in New Zealand in the 1990s. They have been used in NZ made top loader washing machines for 30 years. F and P was bought out by Haier in 2012 and these direct drive motors are used in some Haier machines. Looks like LG have licensed/borrowed the technology.
You need to sand the porcelain coating off the ends before soldering.
Varnish. They did but they are aluminum wire with copper skin and they rigged connectors with tinned wire and solder
👏👏👏
Put another one for those moter on the other side and use a battery to run that moter
And use the same generator to change the battery
Lg motors are the best .
Lg washing machines should make cars ))
bro, can you share a visual about the wiring diagram? I looked at the blog and couldn't find it. respects.
Juntando las bobinas en dos polos y alambre magnetico mas grueso se logra mayos amperaje y no necedita los componentes q son muy costosos
Revolutions minute per lol
😍😍😍😍😍😍
Ese es un motor de una lavadora
what voltage if no rewireing
Likely around 170VDC after rectification but could be allot more depending on the rectifier configuration. If it is a voltage doubler it could reach 340VDC.
I don't know what you are talking about with the aluminum not being solderable. Superior flux and manufacturing makes both flux and solders specifically for the task. I have used them in the past and they are spectacular at wetting and forming fillets in the area of junctions. Superior 1260 or 1261 flux and their matching tin zinc alloy solder and you never need worry again. Also, charging a car battery at minimum RPM? LOL! You need more than minimum RPM for that. The unit you have there to regulate the variable output of the generator is called a buck/ boost converter. What you will actually want is a battery charger that accommodates various battery chemistries and incorporates MPPT to optimize the energy harvested from the generator unit regardless of RPM and voltage output.
Thanks for your input... You could be correct. With the correct type of flux, you to solder aluminum, but the "regular" flux was used in this video.
Need to turn on the CC because it off I can not turn it on. I am deaf so no idea what going on there.
I’m not deaf and I don’t know what’s going on either.
Lamba nin yanması icin dc gerekmez as lambayı yakabilirdi uretilen dc değil ac uretilir dc -dc connektör niye gerek
u dont need to reform the coil it all ready generetor bro😐
watch gerard morin. he said this motor can work at 500hp! with just VOLTAGE: RADIANT WATTS:
🎉🎉🎉🎉
It should be noted that any interface between copper and aluminum wire is a hazard which can oxidize and create a fire risk. Such junctions should be avoided!
Why would you reduce the power output of a stator from a washing machine motor why not leave it hook up other stators to it in Ceres and hook up a water wheel to create free power for your home or some way do power the generator to create power for the pump to pump the water to circulate the water from one Chambers another to make a waterfall constant to power the generator forever this is kind of generator I want to have I just need help getting the sucker builts we have different kind of washing machine motors here in America I haven't seen one like narrow stators the large size round like that here in America from a washing machine I think I need five of them war for the house what state is for the water pump system weather platform for one container of water to be while the other container is on a lower platform receiving a waterfall to turn the generator two new sections of pipes circulating the water from the bottom chamber to the top with a pump when it gets full from the bottom it blows out a short top pipe to turn the generator with water falling across the generating wheel blades the water will. in theaters like you show in their videos so I will need access to four stater what's the 5th grader running the water pump to circulate the power of the water to make power with a generators can a bicycle buy chain to physically turn the shaft yourself to create power in the 5th fifth stator to start off right now pump once it does so and the pump is turning the water wheel you can stop pedaling and get off the bike I want you to do is job instantly having power free energy you know I have to worry about running into a crow Showbox that will maintain the current throughout your home off the generator will it free energy be safe for your electronics in your house my house use 1:10 to 1:20 the other house uses 110 to 120 + 220 and I want this generator to be able to run at both houses is that possible to Toby Alfred turn off the outside breaker box we're only paid $10 a month to have the power on in case I need to flip it back on for any reason to run both houses put the turn it off and leave it off on the rest of the time and run off the free energy system that I want power both houses is this all possible with that type of plan free energy power plant using water power turn it into electrical powe need a great electrical technician wizard genius to help me destruct this device they were actually work for my homes PS I want to add on to my 11020 house and have 220 washer and dryer heat water and on command water heater built into the system to maintain a warm water for the winter time when it gets low freezing where I live in the Ozarks get your system from freezing up time to stop Frozen and solid ice so you can keep on running and making power throughout the winter as well as summer in a small shed for extra battery pack storage is this all possible send me an answer on that okay these are mine ideas and concerns and I'm not electronic electrical genius that I have ideas that might help a genius but I will take a genius to make it work haha without getting electrocuted in the process
You need a flywheel and a crank.
Why is that? Btw how much watts or kilowatts this generator is making.
Not enough.@@karaabdelkader1273
What a time to be alive!
❤❤❤❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉😅😅😅😅😅😅😮😮😮😮😮😮🎉🎉🎉🎉🎉😂😂😂😂😂😂😂😂😂😂😂😂😊😅
Bad soldering skills :(
you should show it around i see that cable near a wall so no like from me, there is a lot of fake those days
Thanks for your input. I'll need to remember to do a walk around shot in the next follow-up video.
Low RPM = Low efficiency, poor transmission and terrible stability.
I can tell by the LED brightness and stability, you have it plugged in to the outlet. Your generator is not generating enough power and this is bs