Those jigs are some of of the most impressive applications of 3D printing I’ve seen, what an inspirational video! There is nothing remotely janky about that coiling process. Thank you for sharing 🙏
Would it make any difference if the wire was wound with a more complex geometry, such as a helical spiral that also matches the geometry of the magnets?
@@christopherd.winnan8701 I haven't seen any DIY alternators created with a helix-type geometry (if you could point me to an example I'd be curious). Furthermore I do not think a more complex stator configuration would necessarily make the build more impressive.
if you plan on making a bunch of these, all I can say is WOW! As others have commented - I've never seen such clever use of custom jigs in my life! Well Done!
😮😮 That Guy is a genius. Probably he build this in his own garage. When I look at work of the peoples like him I know there is a future for our Planet 🌎. Bravo to you sir!!
Thank you for sharing, this looks really impressive and inspiring. I am too working on building the VAWT using AFG, this video helps me to think more about the design and build process. Using tools definitely helps the model to be more precise as compared to building without tools.Keep up the good work and looking forward for the next update.
The way you attacked the problem of making this generator is like a composer controlling the flow of music. What you are showing I did exactly using wooden armature winding a single wire to keep efficiency high. Somehow we must be brothers from different mothers fella. NICE !!!!
That is awesome! Really nice jig you made there... I think that might be helpful to a lot of people seeking to build their own VAWTs like me - although I have some smaller designs in mind. Very cool work and unlike everything I've seen to this point. Looking forward to updates on that. Thanks for sharing Rafal
I like the 3D printed parts,, I have spent days building special tools so I could build the idea in my mind, then a scale drawing on paper, then lots of mathematics and if it looks like it will work, then I build it,,very challenging and fun.,,it's obvious to me that you are thinking all this out in a progressive manner,,very smart I think,,thank you. & keep it up.
10/10 for the jigs! But there is a much quicker (and easier) way. Add your inside and outside diameters of the coil then add double the distance from inside to outside ..... times the number of winds per coil and add 10%. That then gets your loose coil. Tie at multiple points. Get a piece of ply with pins or screws at the inside and outside points. wind your coil round the pins. When you put it into your armature use a Lacquer rather than CA glue ..... or just pour your epoxy if you want it to be potted! Got to admit the video of that would not be as good as this, but it would be a lot quicker and easier! Serpentine coils are future for generation!
I think some of the purpose of this was to be able to quickly wind the circular coil with a drill or similar and then fashion that into motor windings. If this isn't the case please let me know because I hope to make a motor as well.
@@slimknight_ I thought roughly the same as Dave W. I'd have fixed shaped blocks onto the base and wound the coil directly around them. That forming jig was nice (and worked) but it's over-engineering the project.
@totherarf "Serpentine coils are future for generation! " Have you seen the serpentine coils used on stellators? Any tips on how to make an easy to build DIY stellator jig? 😎😎😎
@@christopherd.winnan8701 Yes! fix a plate to the end of a tube and wrap your coil around that! On a more serious note we were not talking about plasma manipulation with the OP type of serpentine coil but rather a motor / generator type of device. Apples and Pears!
Have you thought about adding a magnet gear on the reverse side with smaller coils? One side builds amps, the other side watts. I've no idea if it would work though
@crypto Alchemist,hey there,I see that I have found the channel you are looking for that peeks some of your interest in science based material here this channel discusses,right on brotha 👍✌😎
@@drewduncan3436 always on the lookout for fellow minded investors, engineers, designers, and backyard garage scientists! Together we shall open source a better, brighter, full of abundance for all beautiful future ! working together, sharing discoveries, and open source inventions is the only way forward!
Widać napracowanie :) Kilka osób z takim nastawieniem W JEDNEJ LOKALIZACJI i można faktycznie coś zrobić. Samemu jest trudno - czasami jest brak motywacji, środków, zniechęcenie jakimś pojedynczym problemem którego sami nie potrafimy w danym momencie przeskoczyć etc.
Dlaczego w jednej lokalizacji? Szkoda powielać błędy, każdy powinien zbudować określony projekt i tyle. Tutaj autor widocznie osiągnął mierne wyniki i dlatego nie pokazuje rezultatów, ogólnie te serpentynowe cewki mi nie pasują, widziałem pracujące modele z wynikami bardzo słabymi. Narobił się chłopak, chyba coś źle policzył, prawdopodobnie wyszła jakaś katastrofa, wystarczy lekko coś przesunąć i napięcia na cewkach zamiast się sumować, będą się niwelowały. Teoria teorią, praktyka czyni mistrza, wielu zbuduje jedną prądnice, dwie czy trzy i kończy projekt z marnym skutkiem, a robią schematy podobne do tych które i tak są słabe, tutaj potrzeba 1000 modeli bo niektóre rzeczy zgodne niby z logiką, działają w inny sposób.
@@neoklasyk Problem miałem z upchaniem kolejnych warstw miedzi na wewnętrznej średnicy statora. Zmieniłem koncepcję i wykonałem prądnicę w "pionowym" ułożeniu uzwojenia. Wyszło całkiem dobrze, oscyloskop pokazuje gładką sinusoidę. Brakuje mi jednak prędkości obrotowej (w zestawieniu z C-totor - patrz ostatni film), więc postanowiłem zmienić śmigi na Darrieus-H. Aktualnie kończę i zmontuję jakiś film. Mam nadzieję, że się wszystko uda. Moc turbiny to niespełna 400W przy 10m/s.
@@RafalNowicki Czekam na film i testy, moc da się skalować? przy 5 m/s da 200 W? To nie jest zły wynik, dobrze byłoby gdybyś wrzucił jakieś realne testy, amerykanki bez rdzeni poruszają się już przy minimalnym wietrze, gdyby moc 100 W przy 2 m/s była w zasięgu to byłby sukces.
Frumos lucrat si inteleg ca noul tip de bobine trifazice pot fi amsblate pe suport de plastic formad statorul si rotorul format di magneti neodium pe suport tot din plastic sau metal si asfel noul generator are un randament mai bun la turatii mici., intreb rezistenta franarea magnetica scade? Multumesc
Frinarea magnética se numeste Lenz efect bobina aré Nord sud magnet permanent Nord sud eliminar frinarea magnética bobina Nord sud 90 de grande cu Linia magnética permanent magnet
3 PHASE GENERATOR ALWAYS BETTER WHEN CONVERTING BY DIODES TO D.C. ...LESS RIPPLE , BETTER VOLTAGE REGULATION , STEADIER VOLTAGE ....BUT NEW , MODERN CAPACITORS CAN ACCEPT VERY HIGH RIPPLE VOLTAGE or EXTREME WIND SPEEDS CAUSING VERY HIGH VOLTAGES , POWER TRANSISTORS BLEED OFF HIGH VOLTAGES TO A REGULATED/STEADY 12.7 VOLTS TO CHARGE COMMON BATTERIES ....MODERN SOLAR CELL REGULATORS USE THIS SYSTEM ...ALL LE.D. LIGHTING POWER SUPPLIES ACCEPT ANY VOLTAGES >> FULL WAVE DIODE RECTIFIER >> CHARGE SUPER CAPACITOR , POWER TRANSISTORS BLEED REGULATED BOLTAGE TO 2nd SUPER CAPACITOR ...SIMPLE
Very nice jig for making the serpentine coils! Definitively something to remember. But the horrible unnerving music and the jerky cut video gave me almost seizures and I do not even suffer from epilepsy. Pls show some mercy with your audience. thx.
Cogging can also be reduced by making 2 or 3 of these pancake generators on top of each other, and their rotors secured together in 180 or 120 degree phase difference. The overall cogging effect would cancel, from the perspective of the input shaft. The iron cores should be laminated, to prevent eddy currents. And the laminations should be aligned so that they prevent the induced circular current, and not prevent the magnetic field flow. But I want to see this design going all the way until completed 😊
Metal MUST BE Amphoras (NO CRYSTALINE STRUCTURE ) SO MAGNETIC FIELD WILL COLLAPSE QUICKLY and LESS ENERGY WASTE USED TO REVERSE Magnetic FIELD IN *MILD* STEEL ...SILICON STEEL *BETTER* ...AMPHOROS STEEL*BEST* ....BRAIDED SILVER WIRE BEST ....METAL FILINGS USUALLY ONLY USED IN CORES IN *EXTREMELY HIGH FREQUENCY EQUIPMENT*
Thing is generator should be radial flux and electric motor should be axial flux to improve efficiency, consider the amount of torque required to produce a certain number of watts, and consider how much torque is experienced using certain number of watts and idealize those numbers... You will go far by understanding this
I think this method of wiring is not very efficient in generate power. It waists the magnetic field of the wire in the outer and inner circle, only the centripetal part off the wire is doing the job.
Cool Projekt!❤ I am looking forward to see the finished generator. It's it for a wind generator? And btw: it is "I know, ..." Not "I am know, ... " . Just a small mistake. I assume English is not your first language.
That's an odd way of making the coils. Why not make individual windings and then assemble them in proper sequence later. That jid although impressinve is a waste of time, money and effort. I don't see the benefits of a continuous phase winding. All that does is use extra copper wire at the very cornered edges where no power can be generated. Also increases the risk of shorting the wires with excessive heat.
Wszystkie te elementy kosztowały mnie jakieś 300zł-400zł. Więcej jest tam mojej pracy przy projektowaniu, drukowaniu 3D, klejeniu elementów, kompletowaniu, itd. Prądnicę planuję powielać, dlatego zadałem sobie trudu, aby wykonać ten osprzęt. Dzięki niemu jestem w stanie wykonać całość uzwojenia w godzinę (mówię o trzech warstwach). Moc prądnicy, to jakieś 300W przy 400obr/min. Napięcie prawie 14V ma się "pojawić" już przy 75obr/min.
There is away i stumbled on that all you need is a big speaker magnet and a shake flashlight and by placing the shake flashlight with the shake flashlight switch taped on and setting the shake flashlight on the speaker magnet in the right spot with the switch facing upwards then turning it 45 degrees on one side you will notice the light gets brighter, my shake flashlight battery was completely dead and with the switch taped on it only took one shake of the magnet to make the light turn on and it sat on that speaker magnet for 3 weeks and the light was on the intire time until someone knocked I on the floor switching the light off, no moving parts and the light was on for 3 weeks that was cool
Forgive me but this sounds like a troll. Something has the move either the magnet or the coil of wire to generate electric current. Can you possibly explain it with more details?
such awesome tools... but this guy need to go back to college if he wanted to use them to make a decent generator. There are easier and faster ways. And vastly more efficient designs.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Those jigs are some of of the most impressive applications of 3D printing I’ve seen, what an inspirational video! There is nothing remotely janky about that coiling process. Thank you for sharing 🙏
Would it make any difference if the wire was wound with a more complex geometry, such as a helical spiral that also matches the geometry of the magnets?
@@christopherd.winnan8701 I haven't seen any DIY alternators created with a helix-type geometry (if you could point me to an example I'd be curious). Furthermore I do not think a more complex stator configuration would necessarily make the build more impressive.
if you plan on making a bunch of these, all I can say is WOW! As others have commented - I've never seen such clever use of custom jigs in my life! Well Done!
😮😮 That Guy is a genius. Probably he build this in his own garage. When I look at work of the peoples like him I know there is a future for our Planet 🌎. Bravo to you sir!!
You should see Robert Murray Smith
Thank you for sharing, this looks really impressive and inspiring. I am too working on building the VAWT using AFG, this video helps me to think more about the design and build process. Using tools definitely helps the model to be more precise as compared to building without tools.Keep up the good work and looking forward for the next update.
wow bro, you are not playing around with the quality of your manufacturing effort. Impressive
Now this is a top notch tooling jig. Awesome job. You definitely have a good head on your shoulders. Thank you for sharing this video.
Looking forward to part 2 of this video!❤
Thank you!
Your engineering skills are impressive, but do get rid of the annoying music!!!!!
I got nausea from that shit...
Absolutely brilliant jig! Thank you for these ideas
excellent idea for the jig config. Waiting anxiously for the next video
The way you attacked the problem of making this generator is like a composer controlling the flow of music. What you are showing I did exactly using wooden armature winding a single wire to keep efficiency high. Somehow we must be brothers from different mothers fella. NICE !!!!
Very very good work. I hope i can see more of these. Good luck with next one.
ruclips.net/video/EdJQsBhnNNw/видео.htmlsi=aiX77hDxvEI3j1e7
The audio track seems to be completely broken, which takes away from what seems like an awesome video
That is awesome! Really nice jig you made there... I think that might be helpful to a lot of people seeking to build their own VAWTs like me - although I have some smaller designs in mind. Very cool work and unlike everything I've seen to this point. Looking forward to updates on that. Thanks for sharing Rafal
Very impressive, can't wait for the next video
I like the 3D printed parts,, I have spent days building special tools so I could build the idea in my mind, then a scale drawing on paper, then lots of mathematics and if it looks like it will work, then I build it,,very challenging and fun.,,it's obvious to me that you are thinking all this out in a progressive manner,,very smart I think,,thank you. & keep it up.
Thank you, I will wait to watch the next episode.
10/10 for the jigs!
But there is a much quicker (and easier) way.
Add your inside and outside diameters of the coil then add double the distance from inside to outside ..... times the number of winds per coil and add 10%.
That then gets your loose coil. Tie at multiple points. Get a piece of ply with pins or screws at the inside and outside points. wind your coil round the pins.
When you put it into your armature use a Lacquer rather than CA glue ..... or just pour your epoxy if you want it to be potted!
Got to admit the video of that would not be as good as this, but it would be a lot quicker and easier!
Serpentine coils are future for generation!
I think some of the purpose of this was to be able to quickly wind the circular coil with a drill or similar and then fashion that into motor windings. If this isn't the case please let me know because I hope to make a motor as well.
@@slimknight_ I thought roughly the same as Dave W. I'd have fixed shaped blocks onto the base and wound the coil directly around them. That forming jig was nice (and worked) but it's over-engineering the project.
@totherarf "Serpentine coils are future for generation! "
Have you seen the serpentine coils used on stellators?
Any tips on how to make an easy to build DIY stellator jig? 😎😎😎
@@christopherd.winnan8701 Yes!
fix a plate to the end of a tube and wrap your coil around that!
On a more serious note we were not talking about plasma manipulation with the OP type of serpentine coil but rather a motor / generator type of device. Apples and Pears!
Excellent work my man! You have a brilliant path before you.
I hope you don’t burn out any of those serpents before you get to your next arrival.
Would you consider sharing your coil equation spread sheet formula? Have you identified/quantified any additional critical variables since posting?
Of course I will share the sheet, I just need to tidy it up. I have a lot of my notes and other renewable energy stuff there
@@RafalNowicki Thank you so much!
Can I have your mail id to contact
@@sonuchaurasia1893 no problem: rafal.nowicki@foldruk.net
Ciekawa koncepcja, No i prosto z Polski 💪🏼
Jest kropelka, to na pewno będzie śmigać
Is it true that a generator will spin if you apply volt to the the output wires
Is there any new video coming? Hopefully everything is alright.
Have you thought about adding a magnet gear on the reverse side with smaller coils? One side builds amps, the other side watts. I've no idea if it would work though
I don't want to complicate. Besides, I have no space
would you be willing interested in coming on my RealScience series, year of the coil, or free energy fridays shows?
@crypto Alchemist,hey there,I see that I have found the channel you are looking for that peeks some of your interest in science based material here this channel discusses,right on brotha 👍✌😎
@@drewduncan3436 always on the lookout for fellow minded investors, engineers, designers, and backyard garage scientists! Together we shall open source a better, brighter, full of abundance for all beautiful future ! working together, sharing discoveries, and open source inventions is the only way forward!
Widać napracowanie :) Kilka osób z takim nastawieniem W JEDNEJ LOKALIZACJI i można faktycznie coś zrobić. Samemu jest trudno - czasami jest brak motywacji, środków, zniechęcenie jakimś pojedynczym problemem którego sami nie potrafimy w danym momencie przeskoczyć etc.
Dlaczego w jednej lokalizacji? Szkoda powielać błędy, każdy powinien zbudować określony projekt i tyle.
Tutaj autor widocznie osiągnął mierne wyniki i dlatego nie pokazuje rezultatów, ogólnie te serpentynowe cewki mi nie pasują, widziałem pracujące modele z wynikami bardzo słabymi. Narobił się chłopak, chyba coś źle policzył, prawdopodobnie wyszła jakaś katastrofa, wystarczy lekko coś przesunąć i napięcia na cewkach zamiast się sumować, będą się niwelowały.
Teoria teorią, praktyka czyni mistrza, wielu zbuduje jedną prądnice, dwie czy trzy i kończy projekt z marnym skutkiem, a robią schematy podobne do tych które i tak są słabe, tutaj potrzeba 1000 modeli bo niektóre rzeczy zgodne niby z logiką, działają w inny sposób.
@@neoklasyk Problem miałem z upchaniem kolejnych warstw miedzi na wewnętrznej średnicy statora. Zmieniłem koncepcję i wykonałem prądnicę w "pionowym" ułożeniu uzwojenia. Wyszło całkiem dobrze, oscyloskop pokazuje gładką sinusoidę. Brakuje mi jednak prędkości obrotowej (w zestawieniu z C-totor - patrz ostatni film), więc postanowiłem zmienić śmigi na Darrieus-H. Aktualnie kończę i zmontuję jakiś film. Mam nadzieję, że się wszystko uda. Moc turbiny to niespełna 400W przy 10m/s.
@@RafalNowicki Czekam na film i testy, moc da się skalować? przy 5 m/s da 200 W? To nie jest zły wynik, dobrze byłoby gdybyś wrzucił jakieś realne testy, amerykanki bez rdzeni poruszają się już przy minimalnym wietrze, gdyby moc 100 W przy 2 m/s była w zasięgu to byłby sukces.
Amazing ideas and amazing work `````````thanks for making this video ````````11
Frumos lucrat si inteleg ca noul tip de bobine trifazice pot fi amsblate pe suport de plastic formad statorul si rotorul format di magneti neodium pe suport tot din plastic sau metal si asfel noul generator are un randament mai bun la turatii mici., intreb rezistenta franarea magnetica scade? Multumesc
Frinarea magnética se numeste Lenz efect bobina aré Nord sud magnet permanent Nord sud eliminar frinarea magnética bobina Nord sud 90 de grande cu Linia magnética permanent magnet
Multumesc
3 PHASE GENERATOR ALWAYS BETTER WHEN CONVERTING BY DIODES TO D.C. ...LESS RIPPLE , BETTER VOLTAGE REGULATION , STEADIER VOLTAGE ....BUT NEW , MODERN CAPACITORS CAN ACCEPT VERY HIGH RIPPLE VOLTAGE or EXTREME WIND SPEEDS CAUSING VERY HIGH VOLTAGES , POWER TRANSISTORS BLEED OFF HIGH VOLTAGES TO A REGULATED/STEADY 12.7 VOLTS TO CHARGE COMMON BATTERIES ....MODERN SOLAR CELL REGULATORS USE THIS SYSTEM ...ALL LE.D. LIGHTING POWER SUPPLIES ACCEPT ANY VOLTAGES >> FULL WAVE DIODE RECTIFIER >> CHARGE SUPER CAPACITOR , POWER TRANSISTORS BLEED REGULATED BOLTAGE TO 2nd SUPER CAPACITOR ...SIMPLE
Hey when will you update the project? What is the end result?
I wonder how the magnetic /electric resistance will differ, when the coil is bending a lot as opposed to weak curvature. Or no difference what soever.
Why are you making all of these jugs instead of making a stator and winding it by hand?
Very nice jig for making the serpentine coils! Definitively something to remember. But the horrible unnerving music and the jerky cut video gave me almost seizures and I do not even suffer from epilepsy. Pls show some mercy with your audience. thx.
Hi, can we please have a part 2 ? thank you
Where is the next episode?
Nice build, has one key flaw in it though. Unfortunately. Looking cool and efficiency are 2 completely different things.
It's been a year, any progress?
I have a second movie
When will you release the next episode? Will you also share your 3D files with us?
Waooow What a go good luck for the future!
Hi, how you maked the coils? What is the direction of winding for each of 12 coils ? . Can you give me more details? Please.
This also can be used as a motor if connected to battery?
Them are some really interesting jig's you are using.
You custom build them?
👍👍
I don't create them to order, I made them to make my work easier. I want to replicate these generators
I whant more ... More clips... where are they?
Nice, maybe adding iron fillings in stator mould will concentrate more flux
I am familiar with that solution, but it may lead to the issue of 'cogging'
Right, maybe little skew on magnet or stator may reduce cogging
Cogging can also be reduced by making 2 or 3 of these pancake generators on top of each other, and their rotors secured together in 180 or 120 degree phase difference. The overall cogging effect would cancel, from the perspective of the input shaft.
The iron cores should be laminated, to prevent eddy currents. And the laminations should be aligned so that they prevent the induced circular current, and not prevent the magnetic field flow.
But I want to see this design going all the way until completed 😊
Metal MUST BE Amphoras (NO CRYSTALINE STRUCTURE ) SO MAGNETIC FIELD WILL COLLAPSE QUICKLY and LESS ENERGY WASTE USED TO REVERSE Magnetic FIELD IN *MILD* STEEL ...SILICON STEEL *BETTER* ...AMPHOROS STEEL*BEST* ....BRAIDED SILVER WIRE BEST ....METAL FILINGS USUALLY ONLY USED IN CORES IN *EXTREMELY HIGH FREQUENCY EQUIPMENT*
did you make all tools?? amazing!! thanks for sharing!
Yes, I created all these tools. I want to be able to replicate quickly.
@@RafalNowicki can you teach me ?
I use a different jig for making each coil.
Very impressive. 👍👍👍
no hay mas videos ?
When can we expect to continue?
Sicuramente hai pazienza da vendere! (You definitely have plenty of patience!)
Ditunggu video lanjutannya
please test it with different load and different rpm
I imagined stepper motors powering the treaded drives and building perfect serpentine coils
video in 233 pieces ?...instead of 1 ?
Great way to make the windings, but that music drove me mad!
Технологично, конечно. Но такие заморочки по оснастке.
There is no next episode of this video i guess🤔🤔
Thing is generator should be radial flux and electric motor should be axial flux to improve efficiency, consider the amount of torque required to produce a certain number of watts, and consider how much torque is experienced using certain number of watts and idealize those numbers... You will go far by understanding this
next one ?
broo. we need part 2!
How a Power ?
Theoretical power is 300W at 400rpm
what is going on with the audio my friend
where is the next video
I'm working on it. I haven't had much time lately, but the topic will be continued
And next step???
I think this method of wiring is not very efficient in generate power. It waists the magnetic field of the wire in the outer and inner circle, only the centripetal part off the wire is doing the job.
Where's the next time?
Cool Projekt!❤ I am looking forward to see the finished generator. It's it for a wind generator?
And btw: it is "I know, ..." Not "I am know, ... " . Just a small mistake. I assume English is not your first language.
English is not my first language. The generator will be used in the VAWT turbine. Theoretical power is 300W at 400rpm
no need 3 phase, single phase enough. only need less rpm, with much thick wires rolling to get the high voltage : 220V..!!!
please come back!
isthis really DIY?????
между обмотками магниты север -юг последовательно -парно
www.elektro.info.pl/artykul/napedy-i-sterowanie/57908,obliczanie-parametrow-pradnicy-tarczowej-bez-rdzenia-w-stojanie
author, where is the continuation? don't test my patience! 😇😀
Silence is golden..
ruclips.net/video/EdJQsBhnNNw/видео.htmlsi=aiX77hDxvEI3j1e7
amazing!
ruclips.net/video/EdJQsBhnNNw/видео.htmlsi=aiX77hDxvEI3j1e7
Need more info man... pls
That's an odd way of making the coils. Why not make individual windings and then assemble them in proper sequence later. That jid although impressinve is a waste of time, money and effort. I don't see the benefits of a continuous phase winding. All that does is use extra copper wire at the very cornered edges where no power can be generated. Also increases the risk of shorting the wires with excessive heat.
That coil design isn't the most efficient. It's just easier to wind.
Ile kosztuje oprzyrzodowanie zeby wygioc drucik zeby uzyslac 100 W energji 2 tysioce trzy wiecej ??????
Wszystkie te elementy kosztowały mnie jakieś 300zł-400zł.
Więcej jest tam mojej pracy przy projektowaniu, drukowaniu 3D, klejeniu elementów, kompletowaniu, itd. Prądnicę planuję powielać, dlatego zadałem sobie trudu, aby wykonać ten osprzęt. Dzięki niemu jestem w stanie wykonać całość uzwojenia w godzinę (mówię o trzech warstwach). Moc prądnicy, to jakieś 300W przy 400obr/min. Napięcie prawie 14V ma się "pojawić" już przy 75obr/min.
أحسنت حياك الله
👌👌👏👏
Good afternoon. Please tell me, can this generator be made linear?
just wow!
Magnets in an asymmetrical series.
There is away i stumbled on that all you need is a big speaker magnet and a shake flashlight and by placing the shake flashlight with the shake flashlight switch taped on and setting the shake flashlight on the speaker magnet in the right spot with the switch facing upwards then turning it 45 degrees on one side you will notice the light gets brighter, my shake flashlight battery was completely dead and with the switch taped on it only took one shake of the magnet to make the light turn on and it sat on that speaker magnet for 3 weeks and the light was on the intire time until someone knocked I on the floor switching the light off, no moving parts and the light was on for 3 weeks that was cool
Forgive me but this sounds like a troll. Something has the move either the magnet or the coil of wire to generate electric current. Can you possibly explain it with more details?
@@wolfman122970 not necessarily, if positioned correctly the magnet help pull the electrons through the diode gate
11:50 - And next time never arrived
Great
It's not working probably
such awesome tools... but this guy need to go back to college if he wanted to use them to make a decent generator. There are easier and faster ways. And vastly more efficient designs.
grato
looking forward to the next video .
Make some more videos.
ruclips.net/video/EdJQsBhnNNw/видео.htmlsi=aiX77hDxvEI3j1e7
The music sucks, the electrical work is excellent
Call the doctor, he's too sick
Looks like nazy ufo hoovering ship
flux laminated paper
The music is disturbing and distracting
this is WRONG. you have made ONE squiggly coil.!!!!!!!!!
early model t generator Ford did it 100yr agoago
I'm sorry if I was understood. I didn't invent this design. I just developed a coil forming method
The music was absolutely irritating!
WEN PART 2
More