Very helpful information for new pilot, although i would love to see a comprehensive Edgetx Radiomaster Zorro guide....as that is the only radio i currently own....great job John!!
@@RCVideoReviews I too purchased a t18, and I feel a bit misled. The specs spelled out "touchscreen functionality is reserved until supported by software" & like Radiomaster, I took this to mean the hardware was in place, awaiting software support. NOPE! I took the liberty of opening her up & my exploratory surgery yielded no digitizer. There are some unoccupied ports & such visible on the board,seemingly sufficient space within the confines of the radio.i suppose, should one aquire the required bits, has a steady soldering iron hand ,a constitution of solid fortitude, and a track record of NOT fucking up most things one tries to jury-rig, it's entirely possible to DIY a touch screen in the T18, but, as brayed aloud by Bob Dylan & Janis Joplin, it ain't me, babe.
You found the right place. I have a very large collection of OpenTX/EdgeTX material. Make sure you look at my playlists: ruclips.net/p/PLy3TC1ILJYTjsMsQ2YF5ZCUubv0IFiWkd ruclips.net/p/PLy3TC1ILJYTi_r8rRrgLmpJ17WGEZ4lYo ruclips.net/p/PLy3TC1ILJYTjqDXFB84oXVWZG14zyMYYt ruclips.net/p/PLy3TC1ILJYThzwReZComrM-LFTa2wfiUW
hi...sorry i have trouble understanding how to set up the splash screen. i see you have a 'pilot john hopke' pic in stead of the 'edgeTX' pic and i was wondering if you can post a youtube video where you explain/show how to.......i'll be very happy if you can. thanks john
Hey John, thanks for the videos. I just recently bought a tx16s and went with Edgetx. My question is: is there any way to get the start up voice to come on BEFORE the switch warnings? There's also about a seconds delay after the splash screen appears and the voice commands start? Cheers mate
There is no software selectable way to determine the order of voice prompts on boot. On my production radios, I normally delete the hello.wav file anyway. I don't need a "welcome to opentx" prompt every time I turn the radio on. I expect the delay you're talking about is just a function of the boot process. Not much to be done about it.
HI Why did not EdgeTX have the same binding prosedure like OpenTX? I can`t bind Frsky receivers without telemetry with EdgeTX like I can with OpenTX. I need to do this if I want to bind two receiver at the same time and use one as redundancy receiver.
The binding process is manipulated by the MPM firmware, not the radio firmware. In any case, it does use the same process. The option to bind with and without telemetry is available when I select protocols that support telemetry like D16.
@@RCVideoReviews Hi Now I tried, but I can't bind one receiver with telemetry and another without telemetry. That is a must in redundancy system. The Tx can't receive telemetry from two receivers.
Very helpful information for new pilot, although i would love to see a comprehensive Edgetx Radiomaster Zorro guide....as that is the only radio i currently own....great job John!!
Excellent video. Thanks.
You are welcome!
I like new tricks to EdgeTX. Thanks for the snippet John. Keep up the good work.
Thanks Bill. There are capabilities all over the place on this operating system.
Thanks John. Very interesting video
Thanks for watching,
Thanks!
You're welcome. Thanks for hitting the tip jar.
Excellent
Thank you! Cheers!
I'd suggest making a category named "Templates" where you have templates to copy and move to your active models categories.
I used to do that, now I just copy the model that most closely resembles the one I just created.
I love my Jumper T18 so much. It's been a solid transmitter. Just wish it had touchscreen
Touch is like popcorn. I didn't think much of it until they put a bowl of it in front of me. Now I can't get enough.
@@RCVideoReviews I too purchased a t18, and I feel a bit misled. The specs spelled out "touchscreen functionality is reserved until supported by software" & like Radiomaster, I took this to mean the hardware was in place, awaiting software support. NOPE! I took the liberty of opening her up & my exploratory surgery yielded no digitizer. There are some unoccupied ports & such visible on the board,seemingly sufficient space within the confines of the radio.i suppose, should one aquire the required bits, has a steady soldering iron hand ,a constitution of solid fortitude, and a track record of NOT fucking up most things one tries to jury-rig, it's entirely possible to DIY a touch screen in the T18, but, as brayed aloud by Bob Dylan & Janis Joplin, it ain't me, babe.
Just bought a new transmitter with EdgeTX and need all the help I can get.
You found the right place. I have a very large collection of OpenTX/EdgeTX material. Make sure you look at my playlists:
ruclips.net/p/PLy3TC1ILJYTjsMsQ2YF5ZCUubv0IFiWkd
ruclips.net/p/PLy3TC1ILJYTi_r8rRrgLmpJ17WGEZ4lYo
ruclips.net/p/PLy3TC1ILJYTjqDXFB84oXVWZG14zyMYYt
ruclips.net/p/PLy3TC1ILJYThzwReZComrM-LFTa2wfiUW
hi...sorry i have trouble understanding how to set up the splash screen. i see you have a 'pilot john hopke' pic in stead of the 'edgeTX' pic and i was wondering if you can post a youtube video where you explain/show how to.......i'll be very happy if you can. thanks john
ruclips.net/video/vN2kKRw89qM/видео.html
How do you bring up the telemetry monitor?
What I worry about 'touch screen feature ' is my finger accidentally touch the screen and change the setting without being aware of it.
Hey John, thanks for the videos. I just recently bought a tx16s and went with Edgetx. My question is: is there any way to get the start up voice to come on BEFORE the switch warnings? There's also about a seconds delay after the splash screen appears and the voice commands start? Cheers mate
There is no software selectable way to determine the order of voice prompts on boot. On my production radios, I normally delete the hello.wav file anyway. I don't need a "welcome to opentx" prompt every time I turn the radio on. I expect the delay you're talking about is just a function of the boot process. Not much to be done about it.
@@RCVideoReviews I thought so i guess we'll have to live with it or maybe until next fw update. Cheers for the reply
HI
Why did not EdgeTX have the same binding prosedure like OpenTX?
I can`t bind Frsky receivers without telemetry with EdgeTX like I can with OpenTX.
I need to do this if I want to bind two receiver at the same time and use one as redundancy receiver.
The binding process is manipulated by the MPM firmware, not the radio firmware. In any case, it does use the same process. The option to bind with and without telemetry is available when I select protocols that support telemetry like D16.
@@RCVideoReviews
Hi
Now I tried, but I can't bind one receiver with telemetry and another without telemetry. That is a must in redundancy system. The Tx can't receive telemetry from two receivers.
Aside of Flight Time i wish to put Flight Number # (persistent) . How can achieve that?
I'm not aware of a flight number counter in EdgeTX.
Bad Ass LED's, Where did you get those?
Radiomaster makes and sells them. Most of the typical Radiomaster retailers carry them. Radiomaster sent me these directly.
Can a touch screen be added to the Jumper T16?
i try to contact jumper support 3 times to ask same question they never replay i'm lucky to have radiomaster t16s totally different support :)
I’ve read it can but I haven’t attempted the change myself.
@@paolo9535 Jumper Support is the worst! I've never had any luck with contacting them.
Also keen to see touch for the t16, wonder if there is a video out there on the mod ....🤔
Nice. But, need Russian translation. Please be kind
It is captioned. YT should translate for you.
First
Alright John, I swiped my ETX screen to next page and the screen said "Freddie D... First..." Is that a bug or a feature? lol
@@rock4401 😂
Definitely a feature.