Was the TCM demonstrated in video the one that needs to be refurbished or the already refurbished one? I see the gears not matching the speed such as it being in 3rd/4th but only 20.
Hello, i hvae a 2010 Mazda premacy with 5 speed transmission with tiptronic issue-slowing down to turn, or go over a speed bump, or come to an intersection (not stopping totally to 0 mph), then then later accelerating, the transmission is in 3rd gear. Then it lags and slowly accelerates through 15+ mph. The result: poor acceleration. When i switch to manual mode i see it is in 3rd gear? To overcome this i would have to press the gas pedal very hard for it to downshift and then it shoots. Is this normal ?
No that is not normal. This could be a combination of faulty speed sensors and the TCM. We would need to actually have the vehicle to perform a proper diagnosis but you seem to be on the right track watching this video. Let us know if we can help in any way.
We have a 2008 Mazda 3 that while driving in 5th gear at constant speed will make a loud sound a buck forward and the engine revs since it seems to have popped out of gear, then a split second later everything is fine. The AT light also comes on momentarily. We do have the vacuum leak and lean on bank 1 engine codes, so I am not sure it is related. It does shift weird sometime between gears. Could this be the TCM?
What’s the turn around time and price on this repair? Trying to avoid ordering from china, but also need it quick so seeing if expedite options are available. Really appreciate information here, I haven’t looked at the faq as I’m sitting in a parking garage removing this lol.
Thank you. I'm trying to decide whether to get a new TCM or a rebuilt transmission, there's a grinding noise when I try to shift gears but stays rattling and nothing happens
I have a 2012 Mazda 3 hatch 2.0 I had tcm problem and omg $$$ for this model? Other years far cheaper. I traced problem to plug up where ecm is also. Ahole aaa thunked the battery ontop the ecm and plugs there. Found issue and all okay, but moved the tcm. Wtf mounting that ontop trans and UNDER battery tray..
my car has electrical problems i think the daytime lights when turned on cause the car not to detect the key and not start or if car is running it makes it stall out
This company refurbished my TCM, and my Mazda 3 is back on the road again. Thank you so much!
Our pleasure!
Awesome video. Best place for auto computers!
Thank you very much, glad we were able to assist.
Thanks! Very clear directions
You are very welcome. Thank you for watching!
The goat 🙌🏻
Haha, thank you!
Was the TCM demonstrated in video the one that needs to be refurbished or the already refurbished one? I see the gears not matching the speed such as it being in 3rd/4th but only 20.
Our remanufactured TCMs are calibrated to OEM specifications
Hello, i hvae a 2010 Mazda premacy with 5 speed transmission with tiptronic issue-slowing down to turn, or go over a speed bump, or come to an intersection (not stopping totally to 0 mph), then then later accelerating, the transmission is in 3rd gear. Then it lags and slowly accelerates through 15+ mph. The result: poor acceleration. When i switch to manual mode i see it is in 3rd gear? To overcome this i would have to press the gas pedal very hard for it to downshift and then it shoots. Is this normal ?
No that is not normal. This could be a combination of faulty speed sensors and the TCM. We would need to actually have the vehicle to perform a proper diagnosis but you seem to be on the right track watching this video. Let us know if we can help in any way.
thank you
@@acr
Did you get fixed, and if So how ?
Excellent & information video
Will be sending one in
Thank you for watching. We are happy to see that this video was useful.
I have a 2015 Mazda 3 - is this a common issue with this model as well?
Do you need to loctite that screw when you relocate to the new location?
You don’t have to but you can
We have a 2008 Mazda 3 that while driving in 5th gear at constant speed will make a loud sound a buck forward and the engine revs since it seems to have popped out of gear, then a split second later everything is fine. The AT light also comes on momentarily. We do have the vacuum leak and lean on bank 1 engine codes, so I am not sure it is related. It does shift weird sometime between gears. Could this be the TCM?
It could be the TCM in connection with your speed sensor as well.
@@acr ok. Thanks. I sent in my TCM to you today.
@@acr Thanks for fixing my TCM. It now shifts perfectly again!
NEED HELP!
I received a 2010 Mazda 3 2.5l with a missing TCM.
does it matter what model TCM and how can I figure out which TCM to buy??
Give us a call with your vehicle details - 786-879-7566
What’s the turn around time and price on this repair? Trying to avoid ordering from china, but also need it quick so seeing if expedite options are available. Really appreciate information here, I haven’t looked at the faq as I’m sitting in a parking garage removing this lol.
We do have expedited options, please contact us directly at 786-879-7566 for immediate assistance.
Nice mr Ryan
Thank you!
Hi i am getting AT and Engine light On my mazda 5 and the engine code is P0720 does TCM replacement solved my problem?
Is the 2005 year excluded from these tcm issues? Thanks
Please contact us directly so we can find out more about your vehicle and the type of part you need. 786-879-7566
Whats the threading for that relocating stud for us junkyard heroes? Before i go thru the trust coffee can and start guessing.
The nut is provided by us with the order.
What is the nut size i can get it myself
Might the TCU get weathered bolting it to that alternate location?
Thank you for the comment. Please explain your theory.
@@acr perhaps getting wet from rain or snow?
My Tcm is in my Ecu ! I don’t have the one on top of the transmission
Your vehicle is a different model.
Could a faulty TCM cause my Mazda 3 not to shift into gear? Thank you
This, that can certainly be a cause.
Thank you. I'm trying to decide whether to get a new TCM or a rebuilt transmission, there's a grinding noise when I try to shift gears but stays rattling and nothing happens
Forget.
You do security delete on 2005 gto?
Keys are a big pita
Yes, Please contact us with you vehicle specifics at 786-879-7566
Can you explain me how to get you service? At what location do I have to send the tcm ?
You can contact us directly at 786-879-7566 or purchase the service right from our website.
Can I use a 2011 TCM for my 2013 Mazda?
Some our interchangeable as long as the calibration is programmed correct.
Okay you just explained the expedited process lol.
Thank you
Are your services available in canada?
Yes, we can offer services to Canada. You can setup that by reaching out to us directly. 786-879-7566
I have a 2012 Mazda 3 hatch 2.0
I had tcm problem and omg $$$ for this model?
Other years far cheaper.
I traced problem to plug up where ecm is also.
Ahole aaa thunked the battery ontop the ecm and plugs there.
Found issue and all okay, but moved the tcm.
Wtf mounting that ontop trans and UNDER battery tray..
Understood, Let us know if you need any assistance.
Still waiting on a refund
my car has electrical problems i think the daytime lights when turned on cause the car not to detect the key and not start or if car is running it makes it stall out
This is unrelated to the TCM
@@acr I replaced my tcm and it fixed my lights my guessing it was messing with the wiring