How to Replace Valve Cover 2008-2013 BMW 328i xDrive
HTML-код
- Опубликовано: 25 авг 2024
- Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ib/1AEV...
This video shows you how to install a new valve cover gasket in your 2008-2013 BMW 328i xDrive. Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket.
Estimated installation time for a professional technician is approximately: 4 hours 54 minutes
This repair was done on a 2010 BMW 328i xDrive Base 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2009 BMW 328i xDrive
2010 BMW 328i xDrive
2011 BMW 328i xDrive
2012 BMW 328i xDrive
2013 BMW 328i xDrive
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obJA/1A...
• Pry Bar 1aau.to/oabd/1A...
• 10mm Wrench 1aau.to/oafG/1A...
• 8mm Wrench 1aau.to/okv/1AX...
• 10mm Socket 1aau.to/obL6/1A...
• 13mm Socket 1aau.to/ocdt/1A...
• 8mm Socket 1aau.to/obL6/1A...
• Bent Nose Pliers
• E10 Socket
• E14 Socket
• E18 Inverted Torx Socket
• E8 Inverted Torx Socket
• Ratchet 1aau.to/oceG/1A...
• Socket Extensions 1aau.to/ocdt/1A...
• Swivel
• Torque Wrench 1aau.to/obgW/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oRr/1AX...
• Gloves 1aau.to/obfY/1A...
• RTV
• Safety Glasses
• Pick 1aau.to/o5D/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks Andy. Going to work on my cousin's x3 soon. I watched your Silverado cam sensor removal a bunch of times . I thought Chevy's were easier than bmw. Without you guys I only could pump gas before. I am in your debt. Thank you
Can you take it off without removing the actuator?