2000 Silverado 4.8 fuel pressure spec

Поделиться
HTML-код
  • Опубликовано: 2 дек 2024

Комментарии • 13

  • @joeroe2839
    @joeroe2839 6 месяцев назад +1

    My 6.0 has been gettin a p0300 and with the test key bump is 45 then i tuen it over and its 45 and when i rev it , it goes to 40 it seems like it gives it less pressure..pump is like couple yrs old but its been parked for like 2 yrs i think the pump w bad

    • @NobleAutomotive
      @NobleAutomotive  6 месяцев назад

      Be sure to check your fuel filter. Cause it might be trying to stop up. You're not getting enough flow.

    • @joeroe2839
      @joeroe2839 6 месяцев назад

      @@NobleAutomotive new filter too I thought it might ve been that but it ain't still.same pressures . I think it's m y pump

    • @NobleAutomotive
      @NobleAutomotive  6 месяцев назад

      @@joeroe2839 Yeah, does sound that way or there's Screen. on the bottom of the pump sucking together? Either way, it's a new pump.

    • @joeroe2839
      @joeroe2839 6 месяцев назад

      @@NobleAutomotive yess sir ima have to get it warrantied new parts are not the same nomore 😪 thanx for answering!!! God bless

    • @NobleAutomotive
      @NobleAutomotive  6 месяцев назад

      @@joeroe2839 You are welcome.

  • @cheese7837
    @cheese7837 2 года назад +2

    Nice video !

  • @jesusaguilar645
    @jesusaguilar645 2 года назад +1

    I have the same year with the 4.8 but my psi goes up to 54 then back down to 45 with just the key on do you know why??

    • @NobleAutomotive
      @NobleAutomotive  2 года назад

      I think probably the flow back valve in your fuel pump may be just a little slow I wouldn't be worried about that it's my vehicle as long as it maintained a minimum amount of pressure while cruising

  • @arealmaintenanceandrepairl1103

    What if it drops 30 lbs in 10 mns ?

    • @NobleAutomotive
      @NobleAutomotive  Год назад

      Sounds like you have a fuel pump. Fuel pump, hose, or pressure regulator that's leaking by. Symptoms usually are long crank. After setting a while, or you may have to prime it. In order to get it to start.

    • @arealmaintenanceandrepairl1103
      @arealmaintenanceandrepairl1103 Год назад +1

      @@NobleAutomotive I redid the test I forgot to prime the gauge or let the air out it droped less then 5 now