Easy DIY Farmhouse End Table With A Drawer For Storage
HTML-код
- Опубликовано: 10 июл 2024
- In this video, I show you how to build this easy DIY farmhouse style end table with a drawer. This is a great woodworking project for beginners as I show you step by step how to build an end table. Building an end table with a drawer for your home is easy if you use this video guide and the available build plans. Download the end table plans from the link below. Farmhouse home decor is very popular right now. Building your own farmhouse furniture can be easy. I have sold a lot of farmhouse style furniture in my woodworking business. A DIY end table with a drawer adds extra storage for remotes, magazines, electronics, etc. This is an easy small farmhouse end table build. Check the website for high resolution photos of the project. Amazon and other Affiliate links are used in this description.
Download Plans For This DIY End Table
www.731woodworks.com/store
Videos To Watch Next
Matching Farmhouse Coffee Table: • Chunky Farmhouse Coffe...
How To Install Table Top Fasteners: • DIY Farmhouse Coffee T...
Jointing With A Table Saw: • Jointing with a Table Saw
How To Build A Table Top: • How to Build a Wood Ta...
HomeRight Paint Sprayer Review: • HomeRight Paint Spraye...
How To Use Pre-Stain Conditioner: • Watch This Before Buyi...
Delta Cruzer Unboxing: • Delta Cruzer 26-2251 1...
Tools Used In This Build
Delta Cruzer from Amazon: amzn.to/2SArspN
Delta Cruzer from Home Depot: go.magik.ly/ml/10tep/
Wahuda 8” Jointer: amzn.to/2SBQ2GM
DeWalt Orbital Sander: amzn.to/3izuMfq
HomeRight Paint Sprayer: amzn.to/2F9bKPi
Palm Router: go.magik.ly/ml/114ud/
Kreg K5 Pocket Hole Jig: amzn.to/30I6yt8
Kreg Face Clamp: amzn.to/3ntJ1WD
Cheap Quick Clamps: amzn.to/30JJ7Qn
Swanson Combination Square: amzn.to/34BFME2
Swanson Straight Edge: amzn.to/3jKtD68
Framing Square: amzn.to/2GrDO1e
1/8” Straight Bit: amzn.to/3d8gDEL
Supplies Used In This Build
12” Drawer Slides: amzn.to/3e5bApf
Table Top Fasteners: amzn.to/33JiAop
Pre-Stain Conditioner: amzn.to/3jKtZtu
Minwax Dark Walnut Stain: amzn.to/3jT5SsR
Varathane Polyurethane: amzn.to/3loXeSW
Titebond Wood Glue: amzn.to/36KU1Jo
1 ¼” Pocket Screws: amzn.to/3lkuRFF
120 Grit Sandpaper: amzn.to/30IPKm9
I use TubeBuddy to help grow this channel and you can too by using affiliate code 731woodworks at this link www.tubebuddy.com/731woodworks
Get two FREE audio books from Audible by using this link: amzn.to/3cqvgmv I listen to a lot of books while woodworking. Give it a try, you may love it as much as I do!
Camera Equipment Used for My Videos
Canon M50 amzn.to/3en9EaQ
Canon 22mm Lens: amzn.to/32fp79w
Microphone I Use: amzn.to/3crbxTX
0:00 Intro
1:24 Cutting the legs for a table
2:29 Jointing with a table saw
3:19 Laying out the end table
4:02 Pocket hole lovers club
4:39 Assembling the end table
6:09 Installing aprons on bottom of table
7:02 Installing Drawer Stop
8:12 How To Build A Drawer with Plywood
11:10 Installing X brace on table
11:57 Installing drawer slides on end table
14:05 Installing drawer face
14:48 building a top for an end table
18:09 Staining and clear coat end table
20:00 Installing table top fasteners
21:02 Mistakes made when building furniture
22:23 Outro Virtual Fist Bump
Music in this video is from Epidemic Sound. Use my referral link if you sign up. Awesome way to get royalty free music for your RUclips videos. www.epidemicsound.com/referra...
Songs in video:
Jester by Ballpoint
Glitter by Ballpoint
Hi Tech by Ballpoint
Love You On The Inside by Lvly
In The Mud by Cushy
Disclaimer: Amazon and other Affiliate links are used in this description and they help support this channel.
#woodworking #farmhouse #diy 
Хобби
I sure do appreciate you making these how to videos and thank you for the knowledge on how to get started building furniture! 🙏
I just built a set of these and used barnwood pieces for the top and bottom shelf covered in resin and they look amazing!
Matt, thankyou for introducing me to pocket holes...you can never know how much this has changed my life...almost every build I do now, my customers are requesting pocket hole joints....
Thankyou for pulling the runner apart to fit it to the drawer. So many people on RUclips do it wrong.
Cheers from Downunder
Thanks
You are a breath of fresh air and a big help. Thanks and God bless.
Built the non drawer version for my inlaws for Christmas and they LOVE it! Used dowels instead of pocket screws, otherwise used your plans. Even made a RUclips of the build. Thank you!
Awesome
These gotta be the nicest comments I’ve ever seen! I am trying to start crafting things and will be buying your plans and hope I can rig it up to be half way as decent as yours.
Just finished my nightstands, and they turned out great! I used three pieces of rebar evenly spaced across each side, rather than the "X" and stained with deeper gray, sanded, then some brown, sanded, followed by transparent gray. It turned out very nice (wish I could post a photo). God bless.
Just finished making this table using your plans. Came out great and your plans were perfect. Thanks
Matt! You’ve been so amazing, I’ve been watching your videos for a little while now and I finally feel like I can actually do this!
You’ve been such a great help, and this is Exactly the kind of end table I’ve been looking to make!
Awesome! You can do this! Go for it!
Matt I just finished a pair of these using your video. This is like my third project ever and I can’t say how much I appreciate your channel. I’ve learned so much and I’m definitely a fan of pocket holes now! God bless brother
Great to hear!
I recently used the kreg draw jig to help install a sliding shelf / draw for kitchen cab.
I highly recommend them. It takes the guessing game out and helps complete the task ... the first time lol
I'm jumping in head first trying to make some money at this. Your channel is soooo helpful and I appreciate the encouragement. I selected this piece (well, my wife actually did) as my first piece of furniture. I'll post a short video when it's done. Thanks for your help.👊
You're welcome
You’re the man. Simple and clear instructions. Thanks!
Glad to help
Just bought the plans for this build and I’m gonna be building 2 of them. I just finished up building a farmhouse coffee table and a couple end tables to match it will look awesome! I’m still a noob/intermediate and I’ve been doing woodworking for almost a year now and I’ve been subscribed to your channel since I started. Thank you for a good descriptive detailed video and the plans
Cool stuff, are looking forward on selling any of your work on social media?
U were a huge help when I had to secure my coffee table top thanks for the information brother
Hey! Great videos. I’ve built many things for our home and even for a church auction, but I’ve never thought about building furniture to sell. I look forward to your other videos.
Good job Matt After 2 years I'm finally getting around to building one of these. Mine is slightly different of course.. No "X" on the sides, not one, but two drawers and half reclaimed wood and half standard dimensional lumber. Should be pretty good!
I am working on the farmhouse end table. Thank you for all your help. Great channel and keep it up. I am blind and it is a challenge, but because of your videos and easy to follow instructions on your plans for different projects I am out making sawdust and pocket holes time every day here. Thank you for all the free videos. Enjoy them a lot.
I got into wood wooding after buying a new house and figuring out i can make things cheaper then i can buy them. Started watching your channel and have learned alot. Now i have people wanting me to make things for them. Still trying to get the hang of jointing with the table saw... Thanks Matt..
Glad the videos helped you
I finished my 2 they look great! Thanks for the plans!
Glad you like them!
Enjoy watching your work pray that you all have a blessed Christmas
Thank you. Merry Christmas
Man I love your videos! I love woodworking! I just started but ive always worked with my hands framing and such doing finish work is awesome! Keep influencing people like myself to get out there and build it!
Enjoy your videos. Nice to listen to someone that isn't too full of themselves. Keep up the good work. Thanx-.
You do great work. Love how easy you make this. I reference many of your videos over and over again when I am building furniture that I dream up in my head and have no actual plans or diagrams for. You have saved me a lot of stress. Thanks for posting and please keep it up.
Thank you
Awesome video! Looking forward to building a couple for my wife!
Just got 1 of these done yesterday! Second one is just about finished its alot bigger because I already had the drawers so mad it to fit but it turned out great thanks so much! Plan on doing same style for a TV stand here soon to match!
Awesome
Love the addition of plans to your site!! Hope to see more in the future 👊🏻
Thanks. That's the plan (get it, the plan lol)
Love❤❤ the detailed explanation and instructions. Thanks for this video. This is exactly what I’m going for with my next project
Thanks for the video...been wanting to make some of those for our living room.
I'll say that after watching a few of your videos, I finally decided to jump into the pool as well. Thanks for the great ideas and being transparent! This will be another addition to my line as well!
Awesome thank you
Thats what I did so many years ago,.jumped righ in. Now, back then there was no RUclips! So research anything and everything here. It's a great hobby and a way to make extra money. Good luck buddy!
Thank you for responding and the support. Trying to get through the jitters now
Starting this project today!
That looks awesome. I can't wait to build one of them
Thank you
Thanks Matt.
Currently I'm working on a project very similar mine is a knight stand. But all this info I'm using it to finish my project.
Keep up the good work Bud.
Thank you
Love the videos man. It's nice to watch a channel that uses normal tools that a hobbyist could have. Found your channel a few weeks ago, and you're a definite favorite
Awesome, thank you!
Dude you rock, love your videos since you actually explain what to do…keep up the good work!
Love the hidden drawer idea.
Thanks
Bro I work night shift a lot in the oilfield in west Texas, I watch a lot of your videos and just wanted to tell you you’re awesome! Thanks for your channel
I appreciate that. My dad worked the pipelines out there for several years near Odessa.
Been watching all of your videos. I appreciate the fact that you use common tools and nothing fancy like a cnc. Keep up the good work, God bless.
Thanks 👍
Nice plan Matt, I just built one of these and am working on another. I did change it up a bit though. I used pocket holes like the plan but my preferred method is dowels with the dowelmax jig, pocket holes work well here though! I would sent you a pic but don't know how to do it here. I painted the base in an off white and stained the shelf,top and drawer front a dark walnut. really like your videos keep it up!
Another great project, simple and easy! Thanks
Glad you like it!
Matt, awesome little builds. I have been building cabinets and furniture pieces for a minute. I have found for your finish, that shellac (clear) with 2 thin coats( sanding 220 in between coats) and finishing with a Johnson's finishing paste (2 coats or more). This gives you a amazingly smooth finish (like dining room table). I did this on my own dining table. Only I did 4 coats of shellac for durability. It's way easier than poly. Much nicer of a look too. I have pics of product that I mentioned. But I can't attach them to the comments.
Awesome. Thanks
Love your videos man. Im a beginning wood worker and find your content super helpfull and full of tips that i can actually use. Thank you and keep em coming.
Thank you
Great build and excellent guidance! I’m going attempt this build this weekend. My wife and I are expecting our first child in a couple months and this piece would look perfect in the nursery! Keep up the awesome content brother!
Congrats
Gorgeous set of tables.
Glad you like them!
Another great video, thanks for showing the whole process.
Thanks for watching!
I used the pre stain conditioner u suggested great advice
I LOVE MY DELTA...amazing saw.
It’s great
This is a great project. I can see this being an easy sell. Thanks for sharing
Thanks for watching!
Hey Matt, I just finished building the coffee table and the end table. Thank you for the idea. I noticed the pocket holes barely show on the leg braces and the bottom shelf. Mine did too. Just a thought, but if you lowered that horizontal brace 1/2", those holes wouldn't show. Just a thought. When I build it again, I think I'll lower them 1/2" and see what happens.
hey man, just ordered your plans for this without the drawer, going to attempt to build it this afternoon. thanks for helping give me confidence to get into wood working. shout out from Sheridan Arkansas. thanks man!
Awesome. Thank you
I am attempting this now. I am not a woodworker so we’ll see how it turns out!
You got this!
Very nice and simple looking tables. They would go with a lot of different decor. Steve
Thank you
Love your videos...I am new here found this video by accident... now I am going to watch them all
Looks good matt.
Good technique and I love using the 1 x 6. Look at Ana Whites method for installing drawer slides and drawers. It works so easy. Up here in MO if you need some timber from here on the farm.
Hey Matt. I just completed this table after purchasing your plans, but I only needed 2.5 1x6x10’ boards; not 5. Also, I think there might be a mix up on your measurements on the side pieces. Mixed them up. Anyways, it turned out great and I used the same paint scheme you and I both used on the Country Coffee table so they match. Wife loves it too. And I have two boards left over now to build something else. Love your ideas. Thanks.
Just curious, but did you build 1 or 2 of these? I’m looking at some lumber in my area and would prefer to only buy (3) 1x6x10’s if I can!
Fabulous tutorial!
Can't wait!
For reals
Thank you
@@731Woodworks its like waiting for your number to get called. Que the Beetlejuice scene with numbers in hand. 🤣
@@skatedeath2186 lol
Love your videos. I'm a little ADD so your speed is just right
Awesome! Thank you!
I appreciate the time and effort you put in recording your work. Your down to earth explanations make woodworking feel extremely approachable for beginners. Hope you and your family are well!
Thank you
I made this end table this week, it cost $156 for the lumber and slides. Don't see how there is any money to be made building these, especially when there is so much older stuff out there. I can buy an end table that is just as nice if not nicer for around $60. That being said, I really enjoyed building it, it came out great and felt good, I am just starting out, I watch your videos and have ordered several plans from your website. Thank you for your videos!
Great tutorial for the drawer, I hate installing those
You the man !!
Thank you
Another great video. Thanks for sharing.
Thank you
Pretty beautiful work, dude! Really looks fantastic! 😃
Stay safe there with your family! 🖖😊
Thank you
Hey Matt. Love all your videos, I have learned so much. I am going to try to build these tables and the coffee table for my fiances living room. We are redoing the whole room. I do have a small problem I have been having and I notice you are fantastic at it and maybe you could give me some advice. whenever I do pocket holes no matter if I do two clamps at once my boards always move when I feel them tightening up. What am I doing wrong? Channels like yours that help us beginners are wonderful, thank you so much for what you do! God bless!
Awesome video brother!! I’m ordering plans on Friday and will be sharing and tagging you in my photo updates.
Awesome! Thanks
You got it and thanks for inspiring me.
Just found your channel, great simple instructional vids.
Thank
Nice build.
great job, love watching your work. Praying for the time you can make this your daily deal. Keep it up and God Bless your family. It would be great if you gave rough est time for total build. And total material cost. I dont think this would impact your business or client view either way, as they value you and your work. And you may already itemize this for clients regardless.
Thank you. I appreciate the idea and will try to include those next time.
Great video man, I’m done with my end table. About to put some walnut stain on it and then finish it with polyeurathane
I cracked up when you said pocket hole haters turn your head😄 I'm almost finished making my table. You put together a very good video. Much appreciated. 😊
Matt it was just yesterday my daughter asked if I would build her a TV stand/sofa table. After watching your video today, I can’t wait to get started. Oh... btw did you know you are blessed and highly favoured?
Awesome. Yes, I did know that. The Bible tells me so :)
I’m still waiting on the 8” Wahuda jointer review! Nice coffee table though. I’ll be building one soon.
Coming soon, Lord willling
That's really cool
Another great video 👊🏻
Thank you 👊🏻
I would love to see you do a farmhouse king bed frame
As many others have commented, love your down to earth approach and explanations and humor.. Definitely a huge help. Your video make every step seem easy. Keep up the great work.
Not to pile on but damnit the level jointer hack is genius. Subscribed.
lol thank you. Can’t take credit for it. Got it from someone on Instagram few years back
WUMBA SIX!!!
How can there be pocket hole haters? I use a K4 and I love it! I just want to say your videos are great!
I appreciate that!
Very nice. The 2:40 mark made me cry :-) Someone should make a flip cart for the piggy back toys in the back.
lol, for sure!
great video thanks for sharing
Thanks for watching!
Hey Matt, I really love all of your videos and you inspire me to be in the shop every day that I can. I just finished a heck of a project with badly warped tuba-sixes and tubafours. Tried a new yard to get away from HD wood, but they wouldn't let me pick my stock. My question is, where are you buying that really nice looking 1x and 2x material? Thanks for all you do!
My local lumber yard has a good selection of 1x and 2x materials and they let me pick what I want
Cool tip with the level
👍🏻
Nice table, I especially like the Maine state Police plate
Thanks!
@@731Woodworks I'm from Maine myself
Awesome. Maine plate was a gift from someone there.
Great job. Liked.
Big thanks
How can I rip boards if I don’t have table saw?. Old disabled lady trying to make projects to pay for meds to stay alive, can’t buy table saw yet, just paid $900 for 3 DAYS of meds. Thank you, I truly appreciate your videos, much more informative & helpful than others, you are a good man.
A track saw works for wider boards. Or maybe build some type of jig?
Great videos brother
Keep it up 💪🇺🇲
Thank you
Great video 😀👍
Thank you 👍
LOL! "All you pocket hole haters turn your head" I love you man!
👊🏻
Pocket hoes are useful and a practical solution, even those high end furnitures are using them.
Aslong as you use the pocket hole for what it’s meant for I see no issue 😎
Good video thanks
Thank you
Respect 💣 😍🧚🏼
Thank you
Outstanding work as usual. Not a huge fan of the music though. This is my favorite channel, each video is always an improvement from the last.
Thank you
For such a lite table it might have been better to wood slides for the drawer? Looks awesome!!
Thank you
Two things:
1. Thanks for showing how to joint without a jointer. Beginning woodworkers like myself can’t afford it all to start, and my previous farmhouse end table could have seriously used some jointing.
2. Where did you get the wooden mallet? A link would be awesome.
Thanks. I made the mallet myself.
Hey Matt. These are awesome and I bought the plans. I have built the coffee table but think you have a typo in the plans for the coffee table in the cut list. You call out Label B as the top side rails and they are 5 1/2 by 12 but the bottom side rails E are called out as 2 1/2 x 11 1/2. The top and bottom rails have to be the same length. Label C and D also have the same issue. If you assemble per the plans, the rail heights are incorrect and the lower table will not fit correctly
Feel like I have been waiting forever
Lol, sorry