I'm always trying to convince my friends that projects like these are easier than they think so I'm glad to see someone making these types of projects more manageable for people with less experience in electronics. Can't wait to see the rest of the cabinet being built!
+travis Martin yes! The linux distribution called Retropie includes tons of emulators and is ready to go once installed on the SD card. The video didn't leave out any steps, it's really that easy :)
+I Like To Make Stuff Is it possible to set it up to automatically boot to a particular rom? I'm wanting to make my father a full-size Galaga cabinet and would prefer it to automatically boot to that rom specifically. Also, is it possible to configure Retropie to rotate the display? Galaga plays on a sideways-mounted 19" monitor... :P
+Brent Hewitson With a little programming, anything is possible! ;D I know I'm a little late to the party but if you want you can ask around on reddit.com/r/raspberry_pi and try to get some information there. A lot of friendly faces who are more than willing to help you out or at least point you in the right direction
I built my first full size arcade cabinet about 4 years ago,it was one of my first ever projects. I've made 3 more since plus a bunch of fight sticks. Arcades go down so well at poker nights! Stupidly good fun!
I build these devices all the time and interact on many forums where new comers ask about the Control Panel all of the time. I have to say that this is by far the best demonstration of how to pull together a CP that I have seen. I will be sharing this whenever I'm asked how you create a custom control panel in the future. Awesome video.
As a retro gamer, I love seeing all of the latest and greatest indie retro games being played on retro tech. Retro gaming is the future of retro gaming.
And to think that all this time I lived without knowing that those arcade buttons were customizable! You just changed my mind over the Raspberry Pi, as I thought it is way too complicated. Cheers!
I watched this video a couple weeks ago, and since then I have been hooked on creating my own. I am opting for a table top design for two players. Just purchased the 1/2 inch MDF, Spax screws and a crap ton of clamps this past weekend. Now I'm stuck in the world of researching joysticks and buttons...
For those who don't have the space or interest in building a full cabinet, a smaller unit like this is fantastic. I think they call this a "supergun". I'll be watching your cabinet build closely as I've been talking about building one for years.
that's a good start I Like To Make Stuff I have been planning out a build for myself good to know that I can use raspberry Pi as the emulator controller. I can't wait to see more on this.
I built one but with a computer (i-pac included) , I was thinking of making one with the pi but was scared because i am a linux noob. This is awesome, thanks would it be possible to put spotify on the arcade?
upphgm It SHOULD do it by itself. You have to put the card in, start the Pi. It will created the folder structure that it expects for the emulators. Then you can add your roms to that structure (on another computer) and plug the card back in. It should sure that structure now.
Great! I'll try that! This project was just in my taste, so I just had to do it myself. Now I just need to convince my wife that an arcade machine will look great in the living room! ;)
I can't believe it's been a full year since I first commented, but I'm finally doing it, I just ordered the arcade stick and buttons (Newegg had a deal, joystick + board + 8 buttons + all the cables for 20$), thanks for inspiring me for so long!
I have seen that some people are having trouble with this, you just have to watch over and over and over, untill you understand it. That's what helped me. (Also great video!)
Do you know how many Raspberry Pi videos I have had to watch now because of yours?!? Very cool, and yet again I have another entry onto my ever-expanding list of builds.
Your NES collection piqued my interest, so I checked out your channel. Subbed! Can never have too many awesome woodworking channels :) Thanks for the content and comment man. I would've probably never have found you otherwise ;)
Awesome man! Just talked to my gal about making a coffee table arcade cabinet for the living room! Huge help! Thanks for posting all your videos. They're fun and creative. And I love the step by steps.
You know, in Brasil, nowadays, good stuff are denied for us, but I like the possibilities of "One Day..." Thanks a lot for the simple and amazing video! Coming to Brasil, coffee is on me!
Dude, you just make custom buttons in Illustrator and use a silhouette portrait vinyl cutter. Don't worry, you don't even need to know how to program so it's simple. /s
Hi Bob, Me and my friend (10 and 11 years old) have started building our own arcade machine! We have already made the cabinet and got the connectors ready we just need the Joysticks, Pi and the buttons! Thank you so much for this tutorial! It will help me gain a good reputation among my town.
I don't actually build the things you make tutorial of, actually I don't build things at all, but regardless, your videos are really interesting and awesome :D I feel like even if I do start building, the tutorials seems really clear and accurate step-by-step. Keep up the good work :D
There is a "zero delay" usb encoder you can find on eBay if you want a bit less wiring to worry about. They sell a kit with 10 buttons, wires, PCB and joystick.
I can't post a valid auction link because the link will go bad after the auction ends. Instead type zero delay encoder 10 buttons into eBay with no quotes. Look around you'll find a few kits for $25 - $40.
+Taylor Robins The actual encoder itself is good. The joystick has a big deadzone and a lot of throw with a square gate. Not ideal for shmups, passable for fighting games. Buttons are just fine though. It is OK as an entry level set. You can upgrade the stick later to seimitsu or sanwa.
I have been waiting for this video for a while now!!! I can't wait to see your final cabinet. This already is enough for me to get excited about trying out. I received a Raspberry Pi a while back and have been waiting for a project like this to come along. Great work!!! Thanks for sharing.
Wow, that's super awesome. I didn't know about this Raspberry Pi thing. You 're video is an awesome opportunity for me to search some new stuff on electronics!
I've never commented on a video before, but I loved this. Even though I don't really have an interest in making one of these, you made it look so simple and fun. My next/second ever build will hopefully be based on your pallet headboard. Love your videos.
I just made a full size arcade cabinet with a raspberry pi in it. I recommend following this video for the most part and stick with a raspberry pi, setting up mame and a front end on pc is unnecessary expecially with how cheap pi's and a decent size SD card is. Awesome video as always
+I Like To Make Stuff HaHa ok your awesome man love what you do and thanks for the replies I got so excited when I seen you replied! Anyways Im off to see starwars! lol
Nice work as always, Bob. I think it helps to show the "imperfect prototype" stage, as the final, perfected build can make projects seem more intimidating to some. Fun to see a shot of Dr Mario, too... my wife and I play a lot of emulated Dr. Mario in our house :-)
Yay! We finally get to see your creation. You make it look so easy Bob. Love the video and the explanation, even though this isn't really in my skill set I reckon I could have a go after watching this. Thanks Bob!
Thanks for the encouragement, this is why I love the Maker & Woodworking communities. You know what, I'm gonna do some research and have a serious look at it. Thanks again Bob, love your work!
Awesome, I built an arcade machine back in 2002. If only the Raspberry PI was around then i'd have saved about £300. Watching this video has brought back some fond memories. Its a shame I built the cabinet to big and it had to be dismantled and thrown away when I was divorced. I might have to do it again. :)
Is there a simple way to configure the second (player 2) joystick and buttons in emulationstation? I haven't been able to find any resources besides linux programming. Every time I try to do the linux tutorials my eyes glaze over and I want to start drinking heavily.
+Kelly Weeks Use the application from ultimarc, to configure the ipac, or read the currently set key codes. On the Pi, you need to edit the retroarch.cfg file and copy the controls for player 1, change the names to player 2 and add in the correct key codes.
thank you, i have a question since you didnt said where to get the roms and i want to know is if i can run any rom that i found on internet ( i wont say a web page but i know 3 that are the best and anyone with an emulator on the phone nows them), i really want to make an arcade gabinet that its funtional and also to save my game consoles in the bottom part i think it could be amaizing,and actually how im very new to the pi and want to ask you if you know if theres something like the thing to put wifi to the pi but with bluetooth because ill love to make wireless controllers and use the ones that i allready own.
The raspberry pi 3 has an auxiliary video output that can be used for RCA (red/white/yellow). You'll need to configure the Pi to use the right video mode.
I Like To Make Stuff i'm a big fan of your work. I'm at this time working on a truebypass programmable looper for guitar, based on an Arduino. I'm sure you would love it ;)
I Like To Make Stuff it's a clone of that kind of stuff : goo.gl/eAvfWM :) I'll share it with you then when i'm done, thanks for your interest ! Cheers
Nice work mate. very easy first setup for someone who wants to give it a go. I myself am making a standup arcade with an old PC i had. But i do need to program a lot of stuff for this all to work. Keep up the awesome work. love seeing watching you videos.
This is awesome, Bob! Love the no-programming-required! I was curious/turned-off by the programming I assumed this would need, but I'm super stoked that's not true!! Going to have to make one now! And we do actually still have a lot of cartridges left over from the good old days, haha!
Ive been absolutely in love with the idea of making a full size cabinet arcade system for years now. Is there a tally of how much all the parts are? I like the idea of knowing if a project is feasible before starting in on it or if I need to save up more cash first
Great video! I am a COMPLETE newbie to Rasp Pi. As soon as I get some learning basics down with the Pi I just bought, I would like to build this project just as you have done here. Can you please let me know where the next you tube videos are re this project so I can see how you built the full size cabinet - thanks
Captain Cody ENT. not counting the wood to make the frame, it was a little under $200. I also purchased a raspberry pi 2 kit instead of getting the raspberry pi 1 which is less expensive. Instead of buying wood i also purchased a table from a thrift store, and my grandpa and i are just building onto that frame to make the arcade table. Also the arcade button link that they supply ships from China, so if you do try this project out, know that it'll take a little while for the buttons to get to you if you live in the US. Hopes this helps and Good Luck if you start this project :)
Hi there. Thanks for putting this up and the step by steps on your website as well. Fantastic! I noticed on the comments over there that you (and a bunch of other people) were having problems with the player 2 position once RetroPie got updated. Have you found a fix for this yet? Or, anyone else out there? I really want to get started building this! Dream project :)
I Like To Make Stuff Judy Aron I'm not sure is this is what you're referring to but if you have a Raspberry Pi 2 you should be using Retro Pi 2.5 beta.
Mat Stewart i have both a B+ Pi 1 and a Pi 2 to work with. On his website a lot of people are claiming that with a 1, the player 2 controls dont work once you upgrade to the 2.6 retropie. Does your player 2 function on Pi 2, retropie 2.6? I just dont want to start putting things together to find out that it is never going to work.
Hows that ESD working out for your PI ? Something that anyone new to the electronics world may want to know is that it is highly unadvisable to handle any sort if SBC, CCA or PCB without ESD protection. The thing about ESD damage is that it does not make itself immediately apparent, most of the time you find out months or years down the road.
Damn Bob, you are making all the projects that I like and plan to do in the future. You are awesome and I appreciate all the work that you do to put out all of these wonderful videos. (p.s. sorry for any mistakes I'm from Romania) :)
Two quick questions... 1. Do you daisy chain everything and then connect to the ground on one side only, or do you daisy chain player 1 and 2 separately and ground them separately? 2. Ummm, I've forgotten already... Thanks!
Hey bob, just wanted to check in and see if you had an idea when you would have the full project ready? My kids (read: I) would love to be able to play on this! Thanks, nathan
My mom owns a Ms. Pac Man that isn't functioning anymore. Looking to use the existing cabinet and retrofit with the Raspberry Pi! Thanks for the confidence!
I am definitely going to make my own arcade now.. The Raspberry Pi give me all the more reason to go forth with the project. One question though, you connected only one wire from each terminal to the control board right? What happened to the other plug, meaning the one remaining after connecting the LEDs and ground wire?
Love the video but the link for the raspberry pi takes you to a page that's selling a different one than in the video, which one is used in this video? because the one in the video uses a SD card while the one linked uses a micro sd
Wowwww simplemente wow!!!!!!!!!!!! es increíble lo que puede hacer esta pequeña computadora. Tu trabajo es sencillamente genial man!!!!! el precio de este producto es económico, no ocupa mucho espacio como la mayoría de los ordenadores y es veloz. Lo que yo realmente necesito. Lo conectaré a mi Tv de 32" y luego al 42" ^ ^ gracias por aportar esta idea maravillosa. Quería hacer una arcade pero algo que no ocupe mucho espacio y esto es lo mejor que me pudo pasar. Gracias y saludos!
That's some cool stuff! However, I have a few questions for you: -Do you think it could be possible to make a modular Arcade? I mean, the main base, including first player controls and the electronics, with a hdmi port allowing you to plug in any tv, and another port allowing to plus in a second set of controls? -Does the OS keep in memory your saved games? -Is it overall expensive to create such a game-station? -Do you have some kind of blueprints for the wiring? Thanks for your help, and for your awesome work!
I have been watch your videos for the past 2 days and I am loving them. So much so that I wanted to start doing some my self. I am wondering what tools, materials I should start out with but they can't cost much though also I live in the uk where you can't get anything and I have very limited space also some simple ideas. Any help would be much appreciated.
Great video. I have a question. if the Pi has an HDMI out, aren't you limited to LCD monitors with HDMI? what about audio? Do you have speakers? Are you running the sound from your monitor? Does your screen power on without having to access the power button?
I recently saw your MK11 cabinet and came to see what you did for your home machine. I'm looking at making a home cabinet for myself and wonderd if you'd upgrade to something like a Raspberry pi 3 compute module. I've seen it listed for the Circuit Sword Gamboy and that it runs N64 emulation better.
Mame has come so far since I built my first arcade. I still have a usb control panel I built 12-14 years ago; and a box full of arcade parts. This makes me want to have one again.
Love the channel. You have some very cool projects, wish I was more capable. I was wondering if you could build a poker table that had cameras built in to see hold cards like they have on TV or maybe post a plans on how to make one. Thanks.
I'm always trying to convince my friends that projects like these are easier than they think so I'm glad to see someone making these types of projects more manageable for people with less experience in electronics. Can't wait to see the rest of the cabinet being built!
+travis Martin yes! The linux distribution called Retropie includes tons of emulators and is ready to go once installed on the SD card. The video didn't leave out any steps, it's really that easy :)
Can you build an longboard holder for the wall :D
What software is used to apply the Retropie image to the SD card?
I used ApplePi-Baker for the Mac
+I Like To Make Stuff Is it possible to set it up to automatically boot to a particular rom? I'm wanting to make my father a full-size Galaga cabinet and would prefer it to automatically boot to that rom specifically.
Also, is it possible to configure Retropie to rotate the display? Galaga plays on a sideways-mounted 19" monitor... :P
+Brent Hewitson With a little programming, anything is possible! ;D
I know I'm a little late to the party but if you want you can ask around on reddit.com/r/raspberry_pi and try to get some information there. A lot of friendly faces who are more than willing to help you out or at least point you in the right direction
I built my first full size arcade cabinet about 4 years ago,it was one of my first ever projects. I've made 3 more since plus a bunch of fight sticks. Arcades go down so well at poker nights! Stupidly good fun!
I build these devices all the time and interact on many forums where new comers ask about the Control Panel all of the time. I have to say that this is by far the best demonstration of how to pull together a CP that I have seen. I will be sharing this whenever I'm asked how you create a custom control panel in the future. Awesome video.
As a retro gamer, I love seeing all of the latest and greatest indie retro games being played on retro tech. Retro gaming is the future of retro gaming.
Retro gaming is the future of retro gaming. What?
And to think that all this time I lived without knowing that those arcade buttons were customizable! You just changed my mind over the Raspberry Pi, as I thought it is way too complicated. Cheers!
I watched this video a couple weeks ago, and since then I have been hooked on creating my own. I am opting for a table top design for two players. Just purchased the 1/2 inch MDF, Spax screws and a crap ton of clamps this past weekend. Now I'm stuck in the world of researching joysticks and buttons...
Did you complete it?
Any update? Did you build one?
For those who don't have the space or interest in building a full cabinet, a smaller unit like this is fantastic. I think they call this a "supergun". I'll be watching your cabinet build closely as I've been talking about building one for years.
It's REALLY easy tot setup a Raspberry Pi to be a retro arcade machine, NO PROGRAMMING REQUIRED! Check it out!
that's a good start I Like To Make Stuff I have been planning out a build for myself good to know that I can use raspberry Pi as the emulator controller. I can't wait to see more on this.
I built one but with a computer (i-pac included) , I was thinking of making one with the pi but was scared because i am a linux noob. This is awesome, thanks
would it be possible to put spotify on the arcade?
Awesome project, however, I have a question, hur do you get it to read from the USB memory? I cant get it to read from it when I try myself.
upphgm It SHOULD do it by itself. You have to put the card in, start the Pi. It will created the folder structure that it expects for the emulators. Then you can add your roms to that structure (on another computer) and plug the card back in. It should sure that structure now.
Great!
I'll try that! This project was just in my taste, so I just had to do it myself.
Now I just need to convince my wife that an arcade machine will look great in the living room! ;)
I can't believe it's been a full year since I first commented, but I'm finally doing it, I just ordered the arcade stick and buttons (Newegg had a deal, joystick + board + 8 buttons + all the cables for 20$), thanks for inspiring me for so long!
I was waiting for that last sequence the whole time!! Nice!
@Xzavier Uriah wow bots my fav
I have seen that some people are having trouble with this, you just have to watch over and over and over, untill you understand it. That's what helped me. (Also great video!)
Do you know how many Raspberry Pi videos I have had to watch now because of yours?!? Very cool, and yet again I have another entry onto my ever-expanding list of builds.
Awesome! :)
This is ridiculously amazing. Seriously, imagine even the idea of something like this 10 years ago.
Making it look easy Bob! I really want to do this. I own 3,267 NES cartridges by the way...
Holy Cow. I didn't know they had that many games for NES. LOL
I wish I still had my NES still own all the other Nintendo console that I bought though.
Your NES collection piqued my interest, so I checked out your channel. Subbed! Can never have too many awesome woodworking channels :) Thanks for the content and comment man. I would've probably never have found you otherwise ;)
there are only 713 official nes games and 113 unofficial nes games you must have a lot of doubles
jose contreras Maybe they are copies from different regions?
Awesome man! Just talked to my gal about making a coffee table arcade cabinet for the living room! Huge help! Thanks for posting all your videos. They're fun and creative. And I love the step by steps.
rylch44 Awesome! That'll be awesome!
Wow, you're videos are amazing! Great editing style, good flow, good music. Keep it up you're going to be a million sub channel.
Barnacules Nerdgasm Oh geez.. I don't know about that, but I certainly appreciate it!! Thanks Jerry!
Predictions on point
your* videos are amazing!
Little did he know...
Aged well ;-)
Thank you! This video encouraged me to finally build my own arcade cabinet, which I have always wanted. And now I have one!
wow that this is killer
You should make one jimmy
You know, in Brasil, nowadays, good stuff are denied for us, but I like the possibilities of "One Day..."
Thanks a lot for the simple and amazing video!
Coming to Brasil, coffee is on me!
"You can find it." haha!
Awesome video. I can't wait to do this. My rpi is just collecting dust.
***** do it!! It's a blast to play
I pretend to know what you're doing while really I just sit there in awe! You're unbelievable!
"So it really is that simple" and I'm over here like bruh
Dude, you just make custom buttons in Illustrator and use a silhouette portrait vinyl cutter. Don't worry, you don't even need to know how to program so it's simple. /s
@@toothboto1719 nobodys stopping u from drawing them on with a sharpie if ur that cheap
@isaiah I was inferring that he is exaggerating how simple it is, not expensive.
Hi Bob,
Me and my friend (10 and 11 years old) have started building our own arcade machine! We have already made the cabinet and got the connectors ready we just need the Joysticks, Pi and the buttons!
Thank you so much for this tutorial! It will help me gain a good reputation among my town.
You sound badass!
JustJustin27 xD Thanks!
Software engineer for Dell, using a Mac... I like you, Bob.
I don't actually build the things you make tutorial of, actually I don't build things at all, but regardless, your videos are really interesting and awesome :D I feel like even if I do start building, the tutorials seems really clear and accurate step-by-step. Keep up the good work :D
Damn I don't know how to strip wires or crimp on ends!!! I just know how to solder and program!
You can't have level 2 without going through level 1
WARP PIPE B*TCH!
Same
Just got my first raspberry pi and I'm pumped to make something cool like this with it.
There is a "zero delay" usb encoder you can find on eBay if you want a bit less wiring to worry about. They sell a kit with 10 buttons, wires, PCB and joystick.
+PixelOutlaw Can u put a link? :)
I can't post a valid auction link because the link will go bad after the auction ends. Instead type
zero delay encoder 10 buttons
into eBay with no quotes. Look around you'll find a few kits for $25 - $40.
+PixelOutlaw Okey thanks (y) :)
those zero delay are crap, spend a little extra and get sanwa or you'll regret it
+Taylor Robins
The actual encoder itself is good.
The joystick has a big deadzone and a lot of throw with a square gate.
Not ideal for shmups, passable for fighting games.
Buttons are just fine though.
It is OK as an entry level set. You can upgrade the stick later to seimitsu or sanwa.
I have been waiting for this video for a while now!!! I can't wait to see your final cabinet. This already is enough for me to get excited about trying out. I received a Raspberry Pi a while back and have been waiting for a project like this to come along. Great work!!! Thanks for sharing.
Wow, that's super awesome. I didn't know about this Raspberry Pi thing. You 're video is an awesome opportunity for me to search some new stuff on electronics!
I've never commented on a video before, but I loved this. Even though I don't really have an interest in making one of these, you made it look so simple and fun. My next/second ever build will hopefully be based on your pallet headboard. Love your videos.
Thanks so much! That's great to hear! Best of luck on the headboard Nathaniel!
This is super cool, I would love to try this!
I just made a full size arcade cabinet with a raspberry pi in it. I recommend following this video for the most part and stick with a raspberry pi, setting up mame and a front end on pc is unnecessary expecially with how cheap pi's and a decent size SD card is.
Awesome video as always
Bob! You have to make the full sized cabinet! It will be AMAZING!
+Cody Chamberlain It's coming! Don't worry
+I Like To Make Stuff Awesome thanks man! You need a sick I like to make stuff marquee. lol
***** Like I said, don't worry ;) It's gonna be sweet
+I Like To Make Stuff HaHa ok your awesome man love what you do and thanks for the replies I got so excited when I seen you replied! Anyways Im off to see starwars! lol
***** Thanks!! Enjoy it (It's REALLY good)
That was Awesome! Very cool Bob. Also really like both your podcasts and thank you for turning me into RadioLab
Nice work as always, Bob. I think it helps to show the "imperfect prototype" stage, as the final, perfected build can make projects seem more intimidating to some. Fun to see a shot of Dr Mario, too... my wife and I play a lot of emulated Dr. Mario in our house :-)
Ben Brandt Oh man.. Dr. Mario is my game... :) Thanks!
Yay! We finally get to see your creation. You make it look so easy Bob. Love the video and the explanation, even though this isn't really in my skill set I reckon I could have a go after watching this. Thanks Bob!
MrGmach75 You can do it!!
Thanks for the encouragement, this is why I love the Maker & Woodworking communities. You know what, I'm gonna do some research and have a serious look at it. Thanks again Bob, love your work!
Anyone noticed the Konami code at the end ?
6:15
Awesome, I built an arcade machine back in 2002. If only the Raspberry PI was around then i'd have saved about £300. Watching this video has brought back some fond memories. Its a shame I built the cabinet to big and it had to be dismantled and thrown away when I was divorced. I might have to do it again. :)
How much does it (w/ LED Buttons and Joy-Stick) cost?
K, thanks
actually if you look it up now on ebay, you have a full 2 play 8 buttons, 2 player, 2 coin with a usb board (similar to the ipac) for 50$ us
Great project! Can't wait to see the full size arcade!
Is there a simple way to configure the second (player 2) joystick and buttons in emulationstation? I haven't been able to find any resources besides linux programming. Every time I try to do the linux tutorials my eyes glaze over and I want to start drinking heavily.
+Kelly Weeks Use the application from ultimarc, to configure the ipac, or read the currently set key codes.
On the Pi, you need to edit the retroarch.cfg file and copy the controls for player 1, change the names to player 2 and add in the correct key codes.
+I Like To Make Stuff I have a raspberry pie 2 B how do i use a micro usb to boot it up
+I Like To Make Stuff Thanks! I'll check it out. Love the video btw. I have my arcade setup in the living room. The kids love it!
+I Like To Make Stuff I have USB controller interface 2player MAME Multicade Encoder. Will the app from ultimarc work for that as well?
Kelly Weeks I don't believe so, I think it is just for their products.
I was thinking of getting a raspberry pi to mess around with, so this video is very timely for me. Would appreciate more raspberry pi content :)
king shutterbug Good to hear it! I'll see what I can do :)
thank you, i have a question since you didnt said where to get the roms and i want to know is if i can run any rom that i found on internet ( i wont say a web page but i know 3 that are the best and anyone with an emulator on the phone nows them), i really want to make an arcade gabinet that its funtional and also to save my game consoles in the bottom part i think it could be amaizing,and actually how im very new to the pi and want to ask you if you know if theres something like the thing to put wifi to the pi but with bluetooth because ill love to make wireless controllers and use the ones that i allready own.
+sakurito55 You can use a bluetooth dongle and hook up a wireless ps3 / ps4 pad :)
thanks for this. I've been overwhelmed by this in the past. looks super simple now!
very cool, I didn't even know about this!
That looks like so much fun. I need to heat the garage, or expand into the basement. Damn this winter weather!!
This is exactly something I want to do, but with a CRT monitor instead of an LCD for extra retro feel
HDMI to analogue converter/adaptor
The raspberry pi 3 has an auxiliary video output that can be used for RCA (red/white/yellow). You'll need to configure the Pi to use the right video mode.
pendelum5 there you go
Most people would make this into a 30 minute video, thanks for doing it right.
dat konami code at the end
remi zik :)
I Like To Make Stuff i'm a big fan of your work. I'm at this time working on a truebypass programmable looper for guitar, based on an Arduino. I'm sure you would love it ;)
remi zik Thanks! and whoa.. that sounds awesome!! Please share it when you finish it!
I Like To Make Stuff it's a clone of that kind of stuff : goo.gl/eAvfWM :) I'll share it with you then when i'm done, thanks for your interest ! Cheers
Fantastic video!! Great job breaking down a seemingly complicated project into simple steps. Well done & thanks for all you in the Maker community.
What happened to the cabinet build?
hey man.. I really thank you for all the ideas that you bring to the people. Actually this is now my favorite channel in youtube. well done!!
up up down down left right left right b a start!
You beat me to it lol
Or Select Start to include a buddy! :)
👆👆👇👇👈👉👈👉B A B A select start ....no? I played it when it was new😊
I meant WHAT??????
Has this changed at all over the past 3 years? This is pretty awesome.
what the hell with your buttons layout.... ._.
ikr,how the fuck would anyone play 3rd strike with that kinda layout?
He said its just a prototype until he make his cabinet
Dixinormus it doesnt matter, that is worng in so many ways
You spelled wrong, wrong. THE IRONY IS KILLING ME
it was just a shitty example the one he actually made was set up properly
Nice work mate. very easy first setup for someone who wants to give it a go. I myself am making a standup arcade with an old PC i had. But i do need to program a lot of stuff for this all to work. Keep up the awesome work. love seeing watching you videos.
Wow, all these little kids asking where to get the games lol...
ArcadeGames i
This is awesome, Bob! Love the no-programming-required! I was curious/turned-off by the programming I assumed this would need, but I'm super stoked that's not true!! Going to have to make one now! And we do actually still have a lot of cartridges left over from the good old days, haha!
"it's THAT simple"
dude. no.
Het, Bob. Just watched this with my boys. They want to keep up with the rest of it. Thanks for great inspiration!
Worst button layout I've ever seen.
This
Would love to see more videos Bob! You have inspired me to begin woodwork!
Absolutely the coolest thing I've seen a long time. Thank you!
Looking good Bob! Can't wait to see the final project in action.
Ive been absolutely in love with the idea of making a full size cabinet arcade system for years now. Is there a tally of how much all the parts are? I like the idea of knowing if a project is feasible before starting in on it or if I need to save up more cash first
Great video! I am a COMPLETE newbie to Rasp Pi. As soon as I get some learning basics down with the Pi I just bought, I would like to build this project just as you have done here. Can you please let me know where the next you tube videos are re this project so I can see how you built the full size cabinet - thanks
Did you use Resistors in the LED daisy chain? If not, how do you know you aren't going to burn the LEDs? (Ohm's law + LED data sheet)?
I ordered all of my pieces. Excited to start this project.
How much did they cost?
Captain Cody ENT. not counting the wood to make the frame, it was a little under $200. I also purchased a raspberry pi 2 kit instead of getting the raspberry pi 1 which is less expensive. Instead of buying wood i also purchased a table from a thrift store, and my grandpa and i are just building onto that frame to make the arcade table. Also the arcade button link that they supply ships from China, so if you do try this project out, know that it'll take a little while for the buttons to get to you if you live in the US. Hopes this helps and Good Luck if you start this project :)
Glenn Losoya Thanks m8 I live in australia which isn't as bad but ill probably get them from a local supplier on ebay. Thnx anyway
Glenn Losoya Where did you find all the games and put them in the sd card?
Glenn Losoya And how is the final project ? im savin my money too make one aswell
Hi there. Thanks for putting this up and the step by steps on your website as well. Fantastic!
I noticed on the comments over there that you (and a bunch of other people) were having problems with the player 2 position once RetroPie got updated. Have you found a fix for this yet? Or, anyone else out there?
I really want to get started building this! Dream project :)
No fix that I've found yet but I haven't gotten back to my project in a while to try to figure it out.
I Like To Make Stuff Judy Aron I'm not sure is this is what you're referring to but if you have a Raspberry Pi 2 you should be using Retro Pi 2.5 beta.
Mat Stewart i have both a B+ Pi 1 and a Pi 2 to work with. On his website a lot of people are claiming that with a 1, the player 2 controls dont work once you upgrade to the 2.6 retropie. Does your player 2 function on Pi 2, retropie 2.6? I just dont want to start putting things together to find out that it is never going to work.
Judy Aron I misunderstood the problem but I do not have this arcade board I just use my keyboard so I'm not in a place to answer your question.
Mat Stewart thanks anyway!
That is pretty cool. I'm so gonna do a project like this later on so I can play all the arcade classic games at home.
Just discovered your channel and I need to tell you that I really enjoy it...keep up the great work!!
Hows that ESD working out for your PI ? Something that anyone new to the electronics world may want to know is that it is highly unadvisable to handle any sort if SBC, CCA or PCB without ESD protection. The thing about ESD damage is that it does not make itself immediately apparent, most of the time you find out months or years down the road.
Your projects are awesome. What a great way to make a project that's fun for ME and the kids! Now I have to find Mario bros...
Damn Bob, you are making all the projects that I like and plan to do in the future. You are awesome and I appreciate all the work that you do to put out all of these wonderful videos. (p.s. sorry for any mistakes I'm from Romania) :)
Robert Stanca Thank you!! I really appreciate that!
I'm totally going to do this! Awesome work!
This is so good.. This is the first step on a super advanced awesome project.
We need this cabinet build so bad it would be great!
Two quick questions...
1. Do you daisy chain everything and then connect to the ground on one side only, or do you daisy chain player 1 and 2 separately and ground them separately?
2. Ummm, I've forgotten already...
Thanks!
Whoa you really made it look easy. Now I'm itching to try and build an arcade cabinet myself.
Hey bob, just wanted to check in and see if you had an idea when you would have the full project ready? My kids (read: I) would love to be able to play on this! Thanks, nathan
My mom owns a Ms. Pac Man that isn't functioning anymore. Looking to use the existing cabinet and retrofit with the Raspberry Pi! Thanks for the confidence!
Keep going dude. See'll you for the next step. Back to the awesome arcade games world
can't wait to see the finished cabinet!
I was just about to make a full size arcade game. I'll have to wait and see what you have to say for tips.
I am definitely going to make my own arcade now.. The Raspberry Pi give me all the more reason to go forth with the project.
One question though, you connected only one wire from each terminal to the control board right? What happened to the other plug, meaning the one remaining after connecting the LEDs and ground wire?
Love the video but the link for the raspberry pi takes you to a page that's selling a different one than in the video, which one is used in this video? because the one in the video uses a SD card while the one linked uses a micro sd
The one in the video is a very old model, I would recommend going with the newest model for the best performance!
Watching your video a second time I understand the wiring. Man you are good at your video's. :)
Retropie looks lovely. Admittedly I have been focussing too much on Ignition OS (because I backed it on KS), but this looks like a solid alternative.
Wowwww simplemente wow!!!!!!!!!!!! es increíble lo que puede hacer esta pequeña computadora. Tu trabajo es sencillamente genial man!!!!! el precio de este producto es económico, no ocupa mucho espacio como la mayoría de los ordenadores y es veloz. Lo que yo realmente necesito. Lo conectaré a mi Tv de 32" y luego al 42" ^ ^ gracias por aportar esta idea maravillosa. Quería hacer una arcade pero algo que no ocupe mucho espacio y esto es lo mejor que me pudo pasar. Gracias y saludos!
That's some cool stuff!
However, I have a few questions for you:
-Do you think it could be possible to make a modular Arcade? I mean, the main base, including first player controls and the electronics, with a hdmi port allowing you to plug in any tv, and another port allowing to plus in a second set of controls?
-Does the OS keep in memory your saved games?
-Is it overall expensive to create such a game-station?
-Do you have some kind of blueprints for the wiring?
Thanks for your help, and for your awesome work!
I have been watch your videos for the past 2 days and I am loving them. So much so that I wanted to start doing some my self. I am wondering what tools, materials I should start out with but they can't cost much though also I live in the uk where you can't get anything and I have very limited space also some simple ideas. Any help would be much appreciated.
Great video. I have a question. if the Pi has an HDMI out, aren't you limited to LCD monitors with HDMI? what about audio? Do you have speakers? Are you running the sound from your monitor? Does your screen power on without having to access the power button?
I recently saw your MK11 cabinet and came to see what you did for your home machine.
I'm looking at making a home cabinet for myself and wonderd if you'd upgrade to something like a Raspberry pi 3 compute module. I've seen it listed for the Circuit Sword Gamboy and that it runs N64 emulation better.
Seriously that is the coolest project ever, thanks! I can't wait to see the end result!
Mame has come so far since I built my first arcade. I still have a usb control panel I built 12-14 years ago; and a box full of arcade parts. This makes me want to have one again.
Wow! Great video! This project is now on my long list of projects. Thanks Bob!!
You made something complicated look very simple, great vid.
Where did you bought the "Ipac controller'?
Love the channel. You have some very cool projects, wish I was more capable. I was wondering if you could build a poker table that had cameras built in to see hold cards like they have on TV or maybe post a plans on how to make one. Thanks.