Mine and everybody else’s I have seen is mounted the other way around with the main connections at the top and I am a bike mechanic that works in electric scooter and bike shop and was told to install like this , so the main connectors are up put the way of any potential water
I appreciate the time you took to watch and make this comment mate, I honestly don’t know exactly what I’m doing as why this isn’t a tutorial. Can you please find me on Instagram and elaborate more my account is “ansstayt”
Damn dude you still haven't got your battery??! I feel kinda bad now! Having that spare battery though has been a huge help and money saver/maker for me. Can pretty much do deliveries non stop now. I've got over 15,000 km racked up! Hope your battery arrives soon man.
hi,just a bit of advise regarding the ebmx tune.on mine the e-brake,tilt and sidestand sensor no longer works.my point is just be bare in mind if you fall of especially is the high level settings the rear wheel continues to spin.fit a magnetic lanyard its the safe option.
BAC8000 got double the muscles!!! MONSTER acceleration… if you put side by side BAC8000 vs BAC4000 both with big high power batteries it’s night and day difference. We’ve made many videos talking about.. every 50 extra phase amps you can feel.. imagine extra 200-400!! INSANE!!!!
I was cringing when you installed your phase wire extenders backwards and then covered up both color identifiers with the heat shrink tube. Now If you ever take the controller off, you will have no way of knowing what wire goes where as they are all plain black and don’t have the color identifiers. I recommend you get some colored electric tape or heat shrink tube and remark those wires before they get mixed up! I understand this isn’t a how-to, just giving you a tip. Also, the heat shrink on the empty ECU harness pigtails only needs to be pinched on the open side of the connector, it forms a perfect seal around the connector when it shrinks. You can use a lighter to get it hot enough to slightly melt the heat shrink then pinch it together to seal the connector. Pumping it full of hot glue is a bad idea just in case you ever want to go back to the stock controller or sell it or anything like that. Other than that, great video my friend!
I just wrote what was what when I removed the bac8k next time with permanent market, I’ve since switched to the Ebmx X-9000 and ditched the extenders anyway 💪
Was battling a flat phone most of the video! Sorry it’s a little jumpy
i ain’t even got a surron and love watching these videos they are super helpful 👍🏼
6:54 yeah cardboard = best and cheapest heat-gun shield around
Mine and everybody else’s I have seen is mounted the other way around with the main connections at the top and I am a bike mechanic that works in electric scooter and bike shop and was told to install like this , so the main connectors are up put the way of any potential water
I appreciate the time you took to watch and make this comment mate, I honestly don’t know exactly what I’m doing as why this isn’t a tutorial. Can you please find me on Instagram and elaborate more my account is “ansstayt”
Facts
17:15 yeaaahhh love that zip tie trick holding the controller while installing the lugs =]
Looks great! Can’t wait to see you ripping!
what brand of riser is that? Looks nice with the red!
Haha another Surron user with a wrist brace. Thanks for info doing the same on my Talaria Sting.
Damn dude you still haven't got your battery??! I feel kinda bad now! Having that spare battery though has been a huge help and money saver/maker for me. Can pretty much do deliveries non stop now. I've got over 15,000 km racked up! Hope your battery arrives soon man.
I can’t imagine doing this job with a splint/cast on my wrist 😂 thanks for the video mate!! Much love from Md, USA!
hi,just a bit of advise regarding the ebmx tune.on mine the e-brake,tilt and sidestand sensor no longer works.my point is just be bare in mind if you fall of especially is the high level settings the rear wheel continues to spin.fit a magnetic lanyard its the safe option.
after having a 4000 i think i need a 8000 these bikes rip hard. the install is a little tricky eh!
BAC8000 got double the muscles!!!
MONSTER acceleration…
if you put side by side BAC8000 vs BAC4000 both with big high power batteries it’s night and day difference. We’ve made many videos talking about.. every 50 extra phase amps you can feel.. imagine extra 200-400!! INSANE!!!!
Cool! what display is that? or did it come with the BAC8000 kit?
solid video bro!
Hi there I was just wondering what site you got all the stuff from cause I want to buy one but don’t know we’re from
I was cringing when you installed your phase wire extenders backwards and then covered up both color identifiers with the heat shrink tube. Now If you ever take the controller off, you will have no way of knowing what wire goes where as they are all plain black and don’t have the color identifiers. I recommend you get some colored electric tape or heat shrink tube and remark those wires before they get mixed up! I understand this isn’t a how-to, just giving you a tip. Also, the heat shrink on the empty ECU harness pigtails only needs to be pinched on the open side of the connector, it forms a perfect seal around the connector when it shrinks. You can use a lighter to get it hot enough to slightly melt the heat shrink then pinch it together to seal the connector. Pumping it full of hot glue is a bad idea just in case you ever want to go back to the stock controller or sell it or anything like that.
Other than that, great video my friend!
I just wrote what was what when I removed the bac8k next time with permanent market, I’ve since switched to the Ebmx X-9000 and ditched the extenders anyway 💪
@@antssta Oh, nice 👍 Did you not like the 8000? Not enough power?! 😳
Nice! It's an insane update!:) The power is scary. I see you got rid of the Cane Creek?! What did you replace it with?
what bars do you have ? and Nic vid :)
Deity 80mm rise bro
Just got them from an online mtb store cheap as
How do you choose your tune when you purchase that one?
is it possible to share you parameter to tune the BAC8000 ?
hi, I just installed a bac8000 and 72v battery, when I switch on the ignition the glass fuse blows, do you have any idea?
You’ve hooked something up wrong or have a short.
could you make the controller waterproof abiut ip rating 67??!?
Not really, no. The case is not designed in a way that that would be feasible.
What app did you tune it with?