How to Replace Rear Outer Wheel Bearing 2008-2010 Ford F-250
HTML-код
- Опубликовано: 12 сен 2024
- Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ic/1AAX...
This video shows you how to install a new rear outer bearing on your 2008-2010 Ford F-250. A vibrating or groaning noise coming from a wheel tells you it's time to replace the bearing! This wheel bearing is a direct replacement for the bearing in your vehicle's solid axle.
This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty
Tools you will need:
• Pry Bar 1aau.to/oKY/1AX...
• 18mm Socket 1aau.to/o6s/1AX...
• 21mm Socket 1aau.to/o6s/1AX...
• Ford Rear Axle Nut Socket
• 1/2 Inch Impact Gun 1aau.to/ooT/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obk5/1A...
• Torque Wrench 1aau.to/oaqV/1A...
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Hammer 1aau.to/oNm/1AX...
• Punch
• Wire Brush 1aau.to/oqK/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I pack the inner bearing with grease just to be sure. A couple grams of bearing grease isn't going to affect almost four litres of gear oil. Don't want to take the chance of starting off with the bearing dry.
why does it have drum brakes and disc brakes?!
What is the tool that takes the hub nut out? Do you all sell that tool? If not, where can I get one?
you know there is a torque spec for that right??