I've had my 1911 S for about four weeks now. The gun is magazine finicky, but the Mec-Gar mags do work well in mine. It does only come with a single ACT mag. I've changed the grips and the barrel bushing to a match grade bushing, that took a lot of slop out of the barrel fit. I'm also changing the recoil spring for a heavier model due to the excessive ejection pattern. The sights are almost impossible to find replacements for. The gun is notorious for shooting low with factory sights and mine does. Overall, I'm exactly $500.00 into the gun with my mods and love it.
I think being magazine finicky is more or less inherent to 1911s from what I can tell. They all seem to have certain brands they prefer. Have you checked with Dawson Precision for a shorter front sight?
@@ColterBrog I'm new to 1911's and this is why 1911's never really interested me much, but all the cool kids have one right? Anyway, the front post is pretty tall, so I've filed it down to the dot and most people say it gets very close. On your recommendation, I see DP does in fact offer front posts for the Girsan. Thanks for the heads up, after shooting my trimmed down post, I'll measure it and purchase the DP sight of the correct height.
@@MWR-lg9qp I always check with Dawson Precision and 10-8 Performance for sights that aren’t quite standard. When the others let me down, often I can find what I need through one of those two. I was under the impression these Girsan pistols accepted normal Novak cut sights, but looking at photos I do see a couple different styles. Like you, I’m not really big on 1911s for this reason. Just not enough standardization.
@craftsman2533 if I recall, ebay. It's a generic 1911 bushing and it fit perfectly. The recoil springs are also generic, so cheap and easy to find. Changing the front post and adding a generic flared mag well took some tooling but I got them. The grip screw conversion to standard 1911 threads was also a retap.
This is an amazing video, very informative and useful! I just got this Turquish 1011 pistol, and afte 7 month I am still very impressed... This thing shoots even better than my Sig 1911. Who would have thought?? I simply love this gun a lot! I will strip the pistol just as you have shown in this video to make sure all is properly lubricated. Thank you so much for sharung!
I’m glad you found it interesting and helpful. I found it to be impressive build quality for the money- not perfect, but certainly plenty useable as is and a respectable foundation to build on.
I don’t think most people do. Overall, the fit and finish is fairly good. Ultimately he decided that sear spring leg for the grip safety was a little too funky, so we went ahead and put a reduced weight sear spring in from Cylinder & Slide. It dropped the trigger pull weight by about a pound while also improving the build quality of the part. If it were mine I’d probably swap the hammer strut just because the stamping has an exceptionally rough finish. I’d swap the trigger out to probably an Ed Brown or similar to get the overtravel stop and improve the appearance. As far as the pistol as a whole goes, the major components are pretty nice. This video is intended to be an unbiased assessment of what can be expected for people considering one, and what parts they might want to swap out. That’s going to depend on the individual and their preferences.
I owe this pistol also, and I agree with you! Not all people do..., but yet too many people have too high expectation on such an a great 1911 pistol like this. I come across this a lot! For what this gun represent, you get A LOT of pistol for such a low cost!! I do not know what people expect for a $500.00 gun?? I also owe 2 SW 1911, 1 Kimber 1911, and 1 Sig Sauer 1911..., and yet this bad boy is almost (not quite) in pair with them when it comes to finish and quality, if you ask me. This gun is indeed mind blowing, just an amazing deal!!!
this vid is a year old so i would assume youve got to know the gun so how do you like it and compare it to other brands? because i bought one of these like 3 or 4 days ago because ive never owned a 1911 and i didnt want to spend 1k+ on one just to not like it in the end and even if i dont like end up liking it i cant be mad nor would i sell it because getting a 1911 for 550 is just a steal at the end of the day.
This pistol was on loan to me from a friend just so I could disassemble it for the purposes of showing the manufacturing quality and giving it a mechanical assessment before he took it to the range. He hasn’t shot it extensively, but he hasn’t had any problems with it so far. My opinion is still that this is a perfectly usable pistol out of the box and also a solid slide and frame to use for a build if someone was inclined to do that. (Certainly isn’t necessary.)
I have a girsan mc1911s, earth tone with black grips and for $550 with taxes out the door I cant complain. It came with an act-mag, case and barrel brush. Had it over a year and a lot of rounds have been through it. So far not a single jam, failed ejection or any other problem. No it's not a Kimber but I've noticed people with top shelf kimber 1911s $1200 & up, they seem hesitant to shoot it or carry it. They clean them weekly having shot it or not. They dont want to scratch or knick it and seem more interested in showing off an expensive name brand firearm, it's a kimber I get it but I'm the type i put stuff through its paces and so far this gun hasn't let me down, no odd wearing or anything i can find. I see people complain a lot about them mainly in posts 2 years or more older so I'm not sure if the earlier versions were a little hinky but mine us ok. No lose parts or rattling parts but for the price I think it's a decent gun, sure most anything or any brand can send out a lemon, I've seen glocks fail after only a few hundred rounds so like anything you could get a lemon. However, if you want a gun you can punish and have a blast with without breaking the bank, the girsan mc1911s .45 is the 1
This is tough to respond to… because I really think of Kimber as an entirely subpar and inferior pistol. I can’t imagine being afraid to carry a Kimber based on considering it too nice to carry. I wouldn’t carry a Kimber because based on experience they are just overpriced junk. I don’t have enough experience with Girsan to say it is better, but it’s difficult to be worse. I solidly rank Kimber as a bottom echelon 1911. Unless you’re going through one of the real big name makers (Ed Brown, Les Baur, Wilson Combat, Nighthawk, etc.) I don’t think it really matters. Halfway decent 1911s are fairly economical. A good 1911 costs a lot. So you probably made the right choice. I don’t think you’d actually get a better pistol with Kimber, and possibly a worse one with worse customer service. Kimber is not worth it.
I feel better after reading this, since i bought one yesterday. The C model with compensator & rail. $554 all said and done. I hope it's reliable, but if not, I know a guy...
Brand new 1st time out today. With ACT Mag 2 feeding problems. Noticed when loading mag they tend to nose dive. 1st mag perfect tapping down after inserting each bullet. 2nd mag did not tap down 3rd did not feed and 5th did same. 2 out of 16 total. Problem is in the mag very tight lips on the mag. Buying Wilson Combat or Mec-Car next should fix it. 20yds, very accurate.
Could also be a break in issue regarding the pistol or the magazines. I’ve had magazines before that wouldn’t feed well initially but they did after some use. The edges of the stamped steel were just slightly rough and a bit of use smoothed them out and allowed normal feeding.
@@ColterBrog It is definitely the magazine not the gun. Only came with 1 mag so I need to get couple extras anyway but will work on the the one that came with the Girsan
I appreciate the comment. I think you’ll be happy with it, especially if you see it as a foundation to build on. This is a handgun that seemingly has pretty good major components- but some of the smaller parts just aren’t very impressive. Taking that solid starting point and then adding in better components seems ideal. You have your own unique handgun that you got to experience doing work on, and improved the quality of it in the process of enhancing your own familiarity with it. To me that’s a win in every aspect. Edit: And shoot it. Bargain pistols like this just beg to be shot. Get it, then go a run it until you break it. Learn why it broke, fix it, and upgrade it. That’s the best part about the extravagance of options available in aftermarket for the 1911 design.
Holster recommendations are difficult. It’s very subjective and personal. For magazines, most people swear by Wilson Combat. I have also seen good success with Tripp. I would recommend trying a few different brands and selecting one based on your preferences and knowing that manufacturer’s geometry works well with your pistol- then stock up on whatever you select. Defensive ammo is much the same. Try a few different kinds to put the pistol through its paces and see what gives you reliable and consistent feeding with your magazines of choice. Popular options are Federal HST, Winchester Ranger, and Speer Gold Dot. Any quality jacketed hollow point from a reputable manufacturer that works well in your pistol is going to be a fine choice, though. Over time I have tended to prefer the less expensive options because it makes it easier to keep larger quantities on hand, shoot more of it to prove reliable function, and to routinely shoot the carried ammo and cycle in fresh from storage.
I’d be willing to bet that’s an ACT Mag and not a Mec-Gar. Act mags look very similar. They are very nice and at least one high end 1911 company (Alchemy Custom Weaponry) includes them with their guns. Good, reliable mags that can be found in the low $20s. As for the gun, they seem to be a pretty nice value for the price. Might have to pick one up for myself at some point.
I think you might be right. It looks very similar to an older Mec-Gar magazine I have, but it looks like their current production mostly uses a plastic follower. Probably an ACT magazine.
I actually have another video showing reassembly of a different 1911- specifically doing so without tools. Since this Girsan is more or less mechanically the same it should be sufficient. There aren’t any real surprises.
ruclips.net/video/3pbvLLdJg2g/видео.htmlsi=AqAmHZY17YljuYJ4 Not the same exact pistol, but pretty much the same process. And yes, that spring ended up being changed out.
I think it’s a great bargain. A lot of these recent Turkish imports are. I won’t speak to the ethics of it, because they’re predominantly knockoffs of other designs with questionable respect for intellectual property rights… but they’re good designs, well made, at great prices. Especially as a basis to do upgrades, they are very promising.
Sticking your finger with a sliver of metal is an important part of the bonding process between you and your pistol. It’s a good thing. And dolled up with Wilson internals, I’m sure it’s awesome now. I definitely think their slide and frame are nice, especially for the bargain it represents.
… is it falling to the half-cock notch? Slipping part way forward? That sounds like an improper sear engagement. Your options would be a warranty claim, taking it to a competent smith who can refit the sear engagement, or consider a paired hammer/sear set already fitted by a reputable manufacturer. 1911 sear engagement isn’t something to mess around with if you aren’t sure of what you’re doing.
This pistol was loaned to me by my former roommate for the purposes of making this video and inspecting the internals for him. He doesn’t shoot all that much, so I can’t say much about the longevity of it. He has not complained about any issues with it, is about all I can say.
This is about what I expected. Overall, pretty good for the money. The major components seem sound. The parts that are not quite as nice as one might hope are relatively inexpensive to upgrade. I think as a platform to build on, it’s a great pistol.
I would consider it a clone, but I do come from a pretty heavy MilSurp background so to me a “real” 1911 is one made for and issued by the US Government. As far as I can tell, this should be parts-interchangeable with what is normal for 1911s. Obviously fitting is often required with 1911s, so that doesn’t necessarily imply drop-in compatibility. I hope that answers your question. If it doesn’t let me know.
@@damoviebull Well, I’d say it’s a clone of a 1911… I don’t know of any state that bans the 1911. Usually the prohibition on “clones” applies to stuff like the AR15. Can’t call it an “AS15” instead and get around the ban.
I would suspect Chiappa is sourcing their magazines either from ACT or MecGar if it looks similar to this one. Haven’t handled one of the Chiappa magazines recently so I can’t swear to it, but many firearms manufacturers subcontract the manufacture of their magazines.
@@ColterBrog You should be knowledgeable enough to say this is how you break down a STANDARD 1911 then. You just said this is how you break down every other 1911. That's not very descriptive. Why would you say that if you know there is a standard and non standard? There are plenty of 1911's that don't field strip like that.
@@issackinney4155 Okay… so you have a weird gun that deviates from the normal 1911 design. That’s not my problem. This isn’t an instructional video on how to field strip your 1911, or any 1911 for that matter. It is showing the internals of a budget 1911 so potential buyers can assess the quality of the manufacturing. What do you want? A refund?
@@ColterBrog Lol...your title says detailed strip disassembling. How does that not mean its not an instructional video? Whatever, I won't watch your channel anymore. Have a good day!
@@issackinney4155 Did it say it’s an instructional video? Tutorial? Did it say “Detail strip disassembly of my weirdo Springfield thing?” Don’t watch my channel. I don’t care. I do this for free because I enjoy it. Your ignoramus commentary as if I’ve somehow wronged you just makes for amusement.
Best inspection and review I've seen on a 1911. That's how ya review a pistol 👍👍
Thanks!
I've had my 1911 S for about four weeks now. The gun is magazine finicky, but the Mec-Gar mags do work well in mine. It does only come with a single ACT mag. I've changed the grips and the barrel bushing to a match grade bushing, that took a lot of slop out of the barrel fit. I'm also changing the recoil spring for a heavier model due to the excessive ejection pattern. The sights are almost impossible to find replacements for. The gun is notorious for shooting low with factory sights and mine does. Overall, I'm exactly $500.00 into the gun with my mods and love it.
I think being magazine finicky is more or less inherent to 1911s from what I can tell. They all seem to have certain brands they prefer.
Have you checked with Dawson Precision for a shorter front sight?
@@ColterBrog I'm new to 1911's and this is why 1911's never really interested me much, but all the cool kids have one right? Anyway, the front post is pretty tall, so I've filed it down to the dot and most people say it gets very close. On your recommendation, I see DP does in fact offer front posts for the Girsan. Thanks for the heads up, after shooting my trimmed down post, I'll measure it and purchase the DP sight of the correct height.
@@MWR-lg9qp I always check with Dawson Precision and 10-8 Performance for sights that aren’t quite standard. When the others let me down, often I can find what I need through one of those two.
I was under the impression these Girsan pistols accepted normal Novak cut sights, but looking at photos I do see a couple different styles. Like you, I’m not really big on 1911s for this reason. Just not enough standardization.
where did u get the match grade bushing from?
@craftsman2533 if I recall, ebay. It's a generic 1911 bushing and it fit perfectly. The recoil springs are also generic, so cheap and easy to find. Changing the front post and adding a generic flared mag well took some tooling but I got them. The grip screw conversion to standard 1911 threads was also a retap.
This is an amazing video, very informative and useful! I just got this Turquish 1011 pistol, and afte 7 month I am still very impressed... This thing shoots even better than my Sig 1911. Who would have thought?? I simply love this gun a lot! I will strip the pistol just as you have shown in this video to make sure all is properly lubricated. Thank you so much for sharung!
I’m glad you found it interesting and helpful. I found it to be impressive build quality for the money- not perfect, but certainly plenty useable as is and a respectable foundation to build on.
Why do people expect perfect finish from 500$ 1911 like it was 1000$ 1911?
I don’t think most people do.
Overall, the fit and finish is fairly good. Ultimately he decided that sear spring leg for the grip safety was a little too funky, so we went ahead and put a reduced weight sear spring in from Cylinder & Slide. It dropped the trigger pull weight by about a pound while also improving the build quality of the part.
If it were mine I’d probably swap the hammer strut just because the stamping has an exceptionally rough finish. I’d swap the trigger out to probably an Ed Brown or similar to get the overtravel stop and improve the appearance.
As far as the pistol as a whole goes, the major components are pretty nice. This video is intended to be an unbiased assessment of what can be expected for people considering one, and what parts they might want to swap out. That’s going to depend on the individual and their preferences.
I owe this pistol also, and I agree with you! Not all people do..., but yet too many people have too high expectation on such an a great 1911 pistol like this. I come across this a lot! For what this gun represent, you get A LOT of pistol for such a low cost!! I do not know what people expect for a $500.00 gun?? I also owe 2 SW 1911, 1 Kimber 1911, and 1 Sig Sauer 1911..., and yet this bad boy is almost (not quite) in pair with them when it comes to finish and quality, if you ask me. This gun is indeed mind blowing, just an amazing deal!!!
hello, since I looked at several reviews of this Girsan pistol and saw that it is not very reliable, as it proved to be for you
They might not be. I never shot this one, although the owner didn’t mention any problems. I don’t think he has shot it much, though.
this vid is a year old so i would assume youve got to know the gun so how do you like it and compare it to other brands? because i bought one of these like 3 or 4 days ago because ive never owned a 1911 and i didnt want to spend 1k+ on one just to not like it in the end and even if i dont like end up liking it i cant be mad nor would i sell it because getting a 1911 for 550 is just a steal at the end of the day.
This pistol was on loan to me from a friend just so I could disassemble it for the purposes of showing the manufacturing quality and giving it a mechanical assessment before he took it to the range.
He hasn’t shot it extensively, but he hasn’t had any problems with it so far.
My opinion is still that this is a perfectly usable pistol out of the box and also a solid slide and frame to use for a build if someone was inclined to do that. (Certainly isn’t necessary.)
I have a girsan mc1911s, earth tone with black grips and for $550 with taxes out the door I cant complain. It came with an act-mag, case and barrel brush. Had it over a year and a lot of rounds have been through it. So far not a single jam, failed ejection or any other problem. No it's not a Kimber but I've noticed people with top shelf kimber 1911s $1200 & up, they seem hesitant to shoot it or carry it. They clean them weekly having shot it or not. They dont want to scratch or knick it and seem more interested in showing off an expensive name brand firearm, it's a kimber I get it but I'm the type i put stuff through its paces and so far this gun hasn't let me down, no odd wearing or anything i can find. I see people complain a lot about them mainly in posts 2 years or more older so I'm not sure if the earlier versions were a little hinky but mine us ok. No lose parts or rattling parts but for the price I think it's a decent gun, sure most anything or any brand can send out a lemon, I've seen glocks fail after only a few hundred rounds so like anything you could get a lemon. However, if you want a gun you can punish and have a blast with without breaking the bank, the girsan mc1911s .45 is the 1
This is tough to respond to… because I really think of Kimber as an entirely subpar and inferior pistol. I can’t imagine being afraid to carry a Kimber based on considering it too nice to carry. I wouldn’t carry a Kimber because based on experience they are just overpriced junk.
I don’t have enough experience with Girsan to say it is better, but it’s difficult to be worse. I solidly rank Kimber as a bottom echelon 1911.
Unless you’re going through one of the real big name makers (Ed Brown, Les Baur, Wilson Combat, Nighthawk, etc.) I don’t think it really matters. Halfway decent 1911s are fairly economical. A good 1911 costs a lot.
So you probably made the right choice. I don’t think you’d actually get a better pistol with Kimber, and possibly a worse one with worse customer service. Kimber is not worth it.
I feel better after reading this, since i bought one yesterday.
The C model with compensator & rail. $554 all said and done. I hope it's reliable, but if not, I know a guy...
Brand new 1st time out today. With ACT Mag 2 feeding problems. Noticed when loading mag they tend to nose dive. 1st mag perfect tapping down after inserting each bullet. 2nd mag did not tap down 3rd did not feed and 5th did same. 2 out of 16 total. Problem is in the mag very tight lips on the mag. Buying Wilson Combat or Mec-Car next should fix it. 20yds, very accurate.
Could also be a break in issue regarding the pistol or the magazines.
I’ve had magazines before that wouldn’t feed well initially but they did after some use. The edges of the stamped steel were just slightly rough and a bit of use smoothed them out and allowed normal feeding.
@@ColterBrog It is definitely the magazine not the gun. Only came with 1 mag so I need to get couple extras anyway but will work on the the one that came with the Girsan
Disassemble and clean inside mag thoroughly...
Thank you for this video it was very informative. I'm looking to buy a Girsan 1911 and you showed what's inside. Thanks again
I appreciate the comment. I think you’ll be happy with it, especially if you see it as a foundation to build on.
This is a handgun that seemingly has pretty good major components- but some of the smaller parts just aren’t very impressive.
Taking that solid starting point and then adding in better components seems ideal. You have your own unique handgun that you got to experience doing work on, and improved the quality of it in the process of enhancing your own familiarity with it.
To me that’s a win in every aspect.
Edit: And shoot it. Bargain pistols like this just beg to be shot. Get it, then go a run it until you break it. Learn why it broke, fix it, and upgrade it. That’s the best part about the extravagance of options available in aftermarket for the 1911 design.
@@ColterBrog Thank you for the response and tips.😁
Iwb holster recommendations anyone? And best mags to use as well as defensive ammo?
Holster recommendations are difficult. It’s very subjective and personal.
For magazines, most people swear by Wilson Combat. I have also seen good success with Tripp. I would recommend trying a few different brands and selecting one based on your preferences and knowing that manufacturer’s geometry works well with your pistol- then stock up on whatever you select.
Defensive ammo is much the same. Try a few different kinds to put the pistol through its paces and see what gives you reliable and consistent feeding with your magazines of choice. Popular options are Federal HST, Winchester Ranger, and Speer Gold Dot. Any quality jacketed hollow point from a reputable manufacturer that works well in your pistol is going to be a fine choice, though. Over time I have tended to prefer the less expensive options because it makes it easier to keep larger quantities on hand, shoot more of it to prove reliable function, and to routinely shoot the carried ammo and cycle in fresh from storage.
I’d be willing to bet that’s an ACT Mag and not a Mec-Gar. Act mags look very similar. They are very nice and at least one high end 1911 company (Alchemy Custom Weaponry) includes them with their guns. Good, reliable mags that can be found in the low $20s. As for the gun, they seem to be a pretty nice value for the price. Might have to pick one up for myself at some point.
I think you might be right. It looks very similar to an older Mec-Gar magazine I have, but it looks like their current production mostly uses a plastic follower.
Probably an ACT magazine.
My two original Girsan 1911 mags are ACT MAG. It says it right on them. Made in Italy.
Great vid. Just wish you would have put it back together for us newbee's, lol. But thanks
I actually have another video showing reassembly of a different 1911- specifically doing so without tools. Since this Girsan is more or less mechanically the same it should be sufficient. There aren’t any real surprises.
Just enjoyed your video. I will check it out. Thanks
@@ColterBrog
nice but i really needed to see it be put back together again. IMO that grip spring is out of wack.
ruclips.net/video/3pbvLLdJg2g/видео.htmlsi=AqAmHZY17YljuYJ4
Not the same exact pistol, but pretty much the same process.
And yes, that spring ended up being changed out.
Picked mine up for 340 couldnt pass it up
I think it’s a great bargain. A lot of these recent Turkish imports are.
I won’t speak to the ethics of it, because they’re predominantly knockoffs of other designs with questionable respect for intellectual property rights… but they’re good designs, well made, at great prices.
Especially as a basis to do upgrades, they are very promising.
💯💯💯💯💯💯
Thanks.
Who makes a holster for it ? Been looking but can't find one
I would assume most railed 1911 holsters could probably accommodate it. I would probably opt to have one made from Kydex.
I had a sliver of metal stick my finger as well when I tore down my Girsan 1911 😂 What a coincidence.
I've also replaced all the internals and mags with Wilson Combat. Only parts left of Girsan is the frame n slide on mine.
Sticking your finger with a sliver of metal is an important part of the bonding process between you and your pistol. It’s a good thing.
And dolled up with Wilson internals, I’m sure it’s awesome now. I definitely think their slide and frame are nice, especially for the bargain it represents.
I was wondering why dose my hammer keep getting pulled Ford
… is it falling to the half-cock notch? Slipping part way forward?
That sounds like an improper sear engagement. Your options would be a warranty claim, taking it to a competent smith who can refit the sear engagement, or consider a paired hammer/sear set already fitted by a reputable manufacturer.
1911 sear engagement isn’t something to mess around with if you aren’t sure of what you’re doing.
How’s it holding up?
This pistol was loaned to me by my former roommate for the purposes of making this video and inspecting the internals for him.
He doesn’t shoot all that much, so I can’t say much about the longevity of it. He has not complained about any issues with it, is about all I can say.
it's a $500 pistol what do you expect?
This is about what I expected. Overall, pretty good for the money.
The major components seem sound. The parts that are not quite as nice as one might hope are relatively inexpensive to upgrade.
I think as a platform to build on, it’s a great pistol.
Is it considered a clone?
I would consider it a clone, but I do come from a pretty heavy MilSurp background so to me a “real” 1911 is one made for and issued by the US Government.
As far as I can tell, this should be parts-interchangeable with what is normal for 1911s. Obviously fitting is often required with 1911s, so that doesn’t necessarily imply drop-in compatibility.
I hope that answers your question. If it doesn’t let me know.
@@ColterBrog I was interested in one of these, but I live in a state that doesn't allow "clone guns". Thank you for replying to my question.
@@damoviebull Well, I’d say it’s a clone of a 1911… I don’t know of any state that bans the 1911. Usually the prohibition on “clones” applies to stuff like the AR15. Can’t call it an “AS15” instead and get around the ban.
@@ColterBrog thanks again, I'll check into the clone hand gun stuff Monday.
Or a chiappa mag
I would suspect Chiappa is sourcing their magazines either from ACT or MecGar if it looks similar to this one. Haven’t handled one of the Chiappa magazines recently so I can’t swear to it, but many firearms manufacturers subcontract the manufacture of their magazines.
I thought RUclips does not allow you to strip a gun like this they call it gunsmithing …it’s a no ..no on RUclips
They don’t allow showing modifications. Disassembly is fine.
At least, that’s how my understanding of the rules are. They have a whole list of what isn’t allowed, but I think I’m in the clear.
You thought wrong! You need to read/study the terms and conditions properly!
My Springfield doesn't field strip like that so no it's like every other 1911.
Then your Springfield is non-standard, and isn’t like every other 1911. This is the normal way in which a 1911 is disassembled.
@@ColterBrog You should be knowledgeable enough to say this is how you break down a STANDARD 1911 then. You just said this is how you break down every other 1911. That's not very descriptive. Why would you say that if you know there is a standard and non standard? There are plenty of 1911's that don't field strip like that.
@@issackinney4155 Okay… so you have a weird gun that deviates from the normal 1911 design. That’s not my problem. This isn’t an instructional video on how to field strip your 1911, or any 1911 for that matter. It is showing the internals of a budget 1911 so potential buyers can assess the quality of the manufacturing.
What do you want? A refund?
@@ColterBrog Lol...your title says detailed strip disassembling. How does that not mean its not an instructional video? Whatever, I won't watch your channel anymore. Have a good day!
@@issackinney4155 Did it say it’s an instructional video? Tutorial? Did it say “Detail strip disassembly of my weirdo Springfield thing?”
Don’t watch my channel. I don’t care. I do this for free because I enjoy it. Your ignoramus commentary as if I’ve somehow wronged you just makes for amusement.
KIMBER!!! Lmao!!! KIMBER sucks!!!!!!
Indeed.