BMW 335i N55 Turbosmart BOV Blow Off Valve Install Guide Without Removing Water Pump E90 F30 DIY
HTML-код
- Опубликовано: 7 сен 2024
- N55 diverter valve how to remove and install Turbo Smart Dual Port VR9 BOV for N55 without removing water pump or draining coolant. Takes 1 to 2 hours, maybe 3 hours for the first time.
N55 Turbosmart BOV: ebay.us/eHx4xZ
Ball End Hex Head Tool: amzn.to/3wWFkwx
Flexible extension 3/8 inch: amzn.to/36HBAnN
If you can remove the water pump this job becomes so much easier.
Tools I Use:
LED Headlamp: amzn.to/3ewLahL
Power Drill: amzn.to/2VN6cls
Cordless Impact Gun: amzn.to/3imEP9y
Torque Wrench: amzn.to/3BkNdzg
Flex head Ratchet Wrench: amzn.to/36JuFdN
Basic Sockets: amzn.to/3kuNjxY
Torx Bits: amzn.to/3BjUhMa
E-Torx Sockets: amzn.to/3ilka5T
Extension Bars: amzn.to/3zb8lWx
Useful Pliers: amzn.to/3wMd1R1
Long Screw Driver: amzn.to/3zgYVZT
Trim Pry Tools: amzn.to/3xVekyM
Tool retrieval magnet: amzn.to/3kAVvwL
Rhino Ramps: amzn.to/2UnhcFX
Sound clip here: • Best Sounding BOV for ...
IG @cars_with_ellie
#N55 #BOV #N54 #CommissionsEarned
Check out the sound clip here. It sounds awesome!
ruclips.net/video/vafycrauaYQ/видео.html
I think a lot of people overlook going from the top for things. I did the mickey mouse flange and the hose. WAY easier to replace that entire part with the intake and the turbo ducts removed from the top. Great video, thanks for the upload!
Thanks for sharing 🙏
Working on this with the watch on, much respect lol
I always forget to take the watch off lol
I like the creative tips and tricks for getting to those stubborn hex bolts.
Glad to help
Thanks for this guide. Makes the job seem less intimidating.
Glad it could help!
Cool video, but you should mention that the only way you're doing this job without removing the water pump is because you left the 3rd bolt off your water pump from a previous job. Everyone else with that third bolt will remove the water pump since you have to disconnect coolant lines to access that bolt.
Thanks. The third water pump bolt is tricky to get to, but very possible using swivel sockets and extensions. There is plenty of guides on the water pump, so I didn’t bother to include it in here.
@@Sals_Garage it’s just convenient for it to be in one video
@@1oftheworstclashers740 Sure thing, I would have included it if I had the third bolt installed (which I didn’t at the time).
If you can get to one bolt and see the others, do you think this job can be completed topside and not even lay on the ground???
Not possible since you cannot reach the bottom two bolts from the top, let alone remove and replace the BOV. It's impossible to see what you are doing from the top. Easiest way is to remove the waterpump: ruclips.net/video/_EueZ7n6JKQ/видео.html
Remove the water pump, trust me, so much easier. 435i xdrive.
Yes I remove it in this video as well.
where was the plug with the 2 wires connected? thanks, is it electronically actuated?
Electronically actuated, it connects to the stock diverted valve connection.
I want to get one, but I dont know if im buying the right one for my car its a e92 2013 and the bov i was looking at says dual port.
Yes. You want the dual port version for increased BOV noise.
Question i want to install this mod to my bmw x5 e70 35i 2012 n55 stock engine ,will this blow off valve cause any problems to the engine or turbo over time?
No issues at all. You will love this mod 👍
Nice guide
Thanks!
This pretty much the same for f30 apart from whhere the intake is?
Yea, the F30 is the same besides the intake location. Kies motorsports has a good DIY guide on the F30. I would still try to get at the top bolt from above while removing the inlet and intake.
After installing the bov I got a code saying bov clamped closed ? Is there normal because of after market bov or is it faulty ?
Normal. 👍
@@Sals_Garage thank you
@@jorgeguaman6904 anytime.
Is this process the same for e90 335xi(n55)?
Yes, but less room to work with due to the front diff. I would remove the water pump if you are having difficulty
Do you think this same method would work for an F15 X5?
The turbo is the same but the inlet design and taking apart the intake might be different. I would remove the water pump if you get stuck at any point.
Is this the same process for the sedan 335i
Yes for the N55 👍 good luck 🍀
Would I need to get a dual port for my 335i 2012 convertiable?
Yes if you want the BOV noise 👍
@@Sals_Garage thanks bro that was a quick response 😳
@@shadmanzzd yea I try to reply to everyone. Good luck! 👍
Do you need upgraded turbos to run this?
Not at all. I have run this on stock turbo with great success.
Do I need a tune to run this bov?
No tune needed.
Im confused, granted mine had a tial when i bought my car, ive removed it without having to do anything else it took like two minutes. This looks totally different than mine
Your e9x N55 engine should look like mine. If not, it may have an upgraded turbo or even a swapped engine LOL.
If you have an N54, it is a lot easier to swap the BOV since its on the charge pipe and not on the turbo itself.
Will my car be able to run properly with the BOV installed since MED17 is a MAF and load based ECU, BOV won't confuse it by letting the MAF-calculated air out of the intake system?
Yes, no issues at all. The MAF only has issues when there is a leak or aftermarket intake sometimes. The car actually runs better than ever with the BOV since the stock DV leaks past 20 psi.
Can this fit f30?
Yes it can 👍
Does it matter if it's ewg or pwg ? Mines is pwg
@@ivanmanzo8543 it’s compatible with both models of N55 turbo
Thanks appreciate it bro
@@ivanmanzo8543 Anytime! Good luck
is there any diy for the xi model?
The only one I know is kies motorsports, but he did the F30 335i xi model. It is pretty similar though. Good luck.
BRUHHHHH F**K THAT! But wonderful tutorial!
Thanks! It's not an easy DIY for sure. You can get similar sound with a simple BMS intake install.
Is this the same process for the e series n55?
Yes sir. Thanks for the comment 🙏
@@Sals_Garage Right on man, thanks!
Anytime!
I stripped the top right bolt man how fucked am I?
Not the worst case. Just remove the water pump for more room and use a screw extractor.
No sound clips? Come on man
What you talking about? I have it in the description and end screen. Also here if you still can’t find it: ruclips.net/video/vafycrauaYQ/видео.html