Thank you for the video, I'm about to pull the trigger on the same RC 3inch kit for my 2016 f150 sport, I was undecided on the RC 2inch, but thanks to your video, I'm sure I want the 3in. Thank you ✊
That 3 inch made it look perfect height thats about the height I want because you don't have to tint your windows on that truck because nobody can see inside with 3 inch lift
Did you stack the blocks in the rear? Kit only comes with a 2" block. I ordered the same thing and mine is an 1" taller in the front than rear. Not to happy with it right now because of that.
I did stack in the rear, this sits about 1 inch higher in the rear than the front. It did make the U-Bolts seem a bit short though, would recommend going and buying longer ones and cutting to size once on and tightened.
I think it will look just fine! That’s pretty close to a true 33! You certainly won’t have to do any trimming! You’ll have full turn lock to lock even off-road!
That’s the way they were in the truck that’s the way they went back in 🤷🏼♂️ after 20k miles it’s had no bad effects, I will say though the bilstiens in my tacoma ride better though 🤪
Thats weird my dad has same truck as well as me and there the other way lol maybe i put them on wrong but I just ordered this same lift for mine running 17x10 -24 offset 33in tires
What’s the height of the bed from the sides, from the ground up, I’m always taking tools out my truck bed from the sides. Can you also let me know what engine you have and the mpg you get?
@@johnramsayskier any update as to if you ever had any CV axle issues 2 years later? I live in Colorado and to do easy to moderate trails on the weekends. Moderate being 12" - 18" rocks at times
@@NeonTuner524 I owned the truck for a year after this video and I had no issues the next owner has not had issues either. I did not have any issues with it off-road and it saw plenty of ungraded dirt roads and some "moderate" colorado and arizona trails
Ok I’m just seeing this video if your 3 inch rough country lift for Tyler f150. You posted this 9 months ago, can I ask you if you are still happy with the lift and how does it ride?
Spindles are stock, ball joint angle is not the worst I’ve seen, I have since put other control arms on though. Would recommend doing that right of the bat if you will be putting a higher offset wheel on it
While they don’t have the exact kit I bought any more, this one is pretty close and adds a new upper control arm for better ball joinT angles! shop.redline360.com/products/rough-country-lift-kit-ford-f150-4wd-09-13-3-suspension-lift-kits-w-struts-shocks?variant=39772525854800¤cy=USD&msclkid=90541e1f564e1bc903677d53df10945d
These I believe were 17x10 we did this lift about three years ago now and I had the wheels about 6 months before that, they may not make them any more in that size, I could also be wrong!
@@johnramsayskier i appreciate the response. I ended up getting some 17x9s and went with the 6inch lift. Because of your video, i was able to decide on what we wanted. Much appreciated!
Ride quality was consistent throughout the 30k miles I put on the truck before I sold it. I would consider going to a bilstien 5100 for a better damping going over washboards and such
Well I suppose we all learn along the way, thanks for the view and the interaction! Still available to help with the actual install if the instructions are a bit hard!
Nope! Steady to exactly 75mph *I would never go faster because that’s against the law 😉, I suspect it’s a wheel weight or tire wear if you are experiencing a shake. Have you tried rotating the tires to see if it helps?
J Ramsay awesome I’m getting ready to do almost the same setup on my 2019 but trying to decide how big of tire I can go. Do you know what your offset on your rims was? Your truck looks super nice considering it’s only a 3” suspension lift.
Adriel Gutierrez yes it did! There is about 5 more inches of ground clearance with the lift and tires! Also without the lift the truck would have needed a lot of trimming for 35s!
Thank you for the video, I'm about to pull the trigger on the same RC 3inch kit for my 2016 f150 sport, I was undecided on the RC 2inch, but thanks to your video, I'm sure I want the 3in. Thank you ✊
That 3 inch made it look perfect height thats about the height I want because you don't have to tint your windows on that truck because nobody can see inside with 3 inch lift
Great video. Thank you
That lift still looks good but to me it just doeent seem tall enough or does it not have long springs because longer springs increase the height
Looks 100x better!
Awesome channel J. I’m a new subscriber. 👊🏼🍻
Did you stack the blocks in the rear? Kit only comes with a 2" block. I ordered the same thing and mine is an 1" taller in the front than rear. Not to happy with it right now because of that.
I did stack in the rear, this sits about 1 inch higher in the rear than the front. It did make the U-Bolts seem a bit short though, would recommend going and buying longer ones and cutting to size once on and tightened.
I hope 285 70 17 looks big enough with the 3 inch lift i just bought. Anyone know? Still have time to trade tires
I think it will look just fine! That’s pretty close to a true 33! You certainly won’t have to do any trimming! You’ll have full turn lock to lock even off-road!
I'm prolly the only one that noticed this but you installed rear shocks backwards 😏
That’s the way they were in the truck that’s the way they went back in 🤷🏼♂️ after 20k miles it’s had no bad effects, I will say though the bilstiens in my tacoma ride better though 🤪
Thats weird my dad has same truck as well as me and there the other way lol maybe i put them on wrong but I just ordered this same lift for mine running 17x10 -24 offset 33in tires
What’s the height of the bed from the sides, from the ground up, I’m always taking tools out my truck bed from the sides. Can you also let me know what engine you have and the mpg you get?
This truck has the coyote 5.0 and gets 17mpg, too tall for getting tools out of the bed for sure
Thank you, was looking at this RC kit. How did it ride after?
It rides better than stock to be honest! I think that’s mostly the 35s helping though!
Did you get any rubbing on the control arm with metal on frame of the truck?
No I did not
Does this same lift kit fit for the 2015-2020 trucks?
Nope I believe they are sprung and valved differently.
What type of cab is that by the way
Crew cab!
Nice truck! I'm looking at this kit for my new 2020. Have you had any problems with cv axles or ball joints? Hows the ride compared to stock?
Bob ride is a bit stiffer compared to stock but even with some light off-roading everything has held up great!
@@johnramsayskier any update as to if you ever had any CV axle issues 2 years later? I live in Colorado and to do easy to moderate trails on the weekends. Moderate being 12" - 18" rocks at times
@@NeonTuner524 I owned the truck for a year after this video and I had no issues the next owner has not had issues either. I did not have any issues with it off-road and it saw plenty of ungraded dirt roads and some "moderate" colorado and arizona trails
Ok I’m just seeing this video if your 3 inch rough country lift for Tyler f150. You posted this 9 months ago, can I ask you if you are still happy with the lift and how does it ride?
Rides a little rough empty but still very happy with it over 10,000 miles of driving no issues.
Hows the ball joint angle on the upper control arms
And are the spindles stock?
Spindles are stock, ball joint angle is not the worst I’ve seen, I have since put other control arms on though. Would recommend doing that right of the bat if you will be putting a higher offset wheel on it
@@johnramsayskier how was the quality on the RC upper control arms and the ball joints?
@@blairdenman837 they were just dandy, they are still on the truck
What is the offset on the wheels?
+2mm?
You have a link to the 3in lift? RC isnt showing a 3in on their website for my 2010 f150
While they don’t have the exact kit I bought any more, this one is pretty close and adds a new upper control arm for better ball joinT angles!
shop.redline360.com/products/rough-country-lift-kit-ford-f150-4wd-09-13-3-suspension-lift-kits-w-struts-shocks?variant=39772525854800¤cy=USD&msclkid=90541e1f564e1bc903677d53df10945d
Awesome set up. I only see fuel assaults available in 17x 9. Did you mean 17 x 9 or do they actually sell 17 x10 ? Thanks man
These I believe were 17x10 we did this lift about three years ago now and I had the wheels about 6 months before that, they may not make them any more in that size, I could also be wrong!
@@johnramsayskier i appreciate the response. I ended up getting some 17x9s and went with the 6inch lift. Because of your video, i was able to decide on what we wanted. Much appreciated!
Very nice, could you measure the highest part of truck height? I want to know if a setup like this will fit inside my garage.thanks!
I will measure it tonight! I think it will fit in most garages!
@@johnramsayskier so what was the measurment cause im gonna lift my 07 f150 stx by 3 inches to
Overall height is 7’1” in the middle and slightly lower on the other cab corners unloaded with no one in the cab.
@@johnramsayskier thanks man
How is the ride quality now?
Ride quality was consistent throughout the 30k miles I put on the truck before I sold it. I would consider going to a bilstien 5100 for a better damping going over washboards and such
Probably should have shown how to install it instead of measuring it so many times .
Well I suppose we all learn along the way, thanks for the view and the interaction! Still available to help with the actual install if the instructions are a bit hard!
What is the diameter for those wheels? And what tire did you get
Wheels are 18x10.5 and the tires are Nitto Ridge grappler 35x12.50x18
Did you have any CV joint issues? Did you drive much in 4WD?
I did a fair bit of adventuring with the truck, no CV issues, next owner had no issues until his son blew the motor up.
Is there still any rake? I want to buy this kit but I’d like to have it level
Not much rake especially if you keep anything in the bed, would not recommend if you tow much weight.
How much did everything cost in total?
$800 lift $1800 wheels and tires
J Ramsay what about for labor
What are the wheels called? I’ve been looking for some I liked and I really like those
“Fuel off Road Assault” Black w/milled accents
m.tirerack.com/wheels/WheelCloseUpServlet?target=runWheelSearch&initialPartNumber=D54618909856BMA&wheelMake=Fuel+Off-Road&wheelModel=Assault&wheelFinish=Black+w%2FMilled+Accent&showRear=no&autoMake=Ford&autoModel=F150+FX4+4x4&autoYear=2010&autoModClar=Super+Crew
Do the control arms come in contact with the shocks at full droop?
No these did not, it was fully functional even at full stuff and full droop crossed up in a sharp ditch.
@@johnramsayskier great to know. Thanks for the reply
@@ethanspruill7539 of course! let me know if you have any other questions, I sold the truck so I am running off memory now!
Does the steering wheel shake above 60mp?
Nope! Steady to exactly 75mph *I would never go faster because that’s against the law 😉, I suspect it’s a wheel weight or tire wear if you are experiencing a shake. Have you tried rotating the tires to see if it helps?
Mine did fixed it with an alignment
Did you get any tire rub or have to trim at all?
Yes I had to trim the fender liners just a hair, they only rubbed at full lock backing up though, or off road.
J Ramsay awesome I’m getting ready to do almost the same setup on my 2019 but trying to decide how big of tire I can go. Do you know what your offset on your rims was? Your truck looks super nice considering it’s only a 3” suspension lift.
How much for the kit?
$799.95 with free shipping
Thanks
Did the lift really make a difference in the truck it looks about the same size as before the kit was on?
Adriel Gutierrez yes it did! There is about 5 more inches of ground clearance with the lift and tires! Also without the lift the truck would have needed a lot of trimming for 35s!
What offset does your wheels have
Those are negative 15 if I remember correctly. Proper poke but not breaking ball joints
Any trimming or rubbing?
No trimming or rubbing
Spacers?
No spacers, just offset!
What size rims?
18s!
Dude can't even read a tape lol
Okay bub come film for me then so I can see what im up too, always good when I get volunteers to come help
What is the offset on the wheels?
-15 I believe