@1:12 Got to do a lift instead of a level because 12.5 inch are way to wide for a level. I personally have the 35’s with a level (295/65r20 Toyo Open Country RT which are 35x11.5) on the stock rims with zero poke (2023 Lariat). I personally like the taller but skinner tires. Your setup does look good.
Looks sick!... I pretty much have the same ride except I'm on a 2-in level with 33s... But I've been wanting to move up to 35s on a 3-in.. I am definitely a fan of the tires running flush with the body... I am not one for poke so this is definitely right up by alley!. Thanks for posting this video 👍🏽👍🏽👊🏽
I heard mention of 13mpg a few times during the video, was that average for both city and highway? I have a '14 Platinum EcoBoost and been looking around at a few options.
They were some cheap eBay spacers. If you really want something good check out far from stock, watch a whistlindeisel RUclips video and you’ll see how good they are lol@@ReyesBuilt
😆😆 yeah and especially with those tire general grabber x3 they are heavy mud tires but are amazing off roading from my experience best tire I’ve had installed on my truck
If your extended warranty isn't through ford, a tune wont void the warranty. Couldve been tuned before you got the truck... BrewCityBoost tune is the best thing I've done to my ecoboost. And a cold air intake from CVF will make those turbos auditable as hell. I hear mine whistling all day now
Thanks so much for that! And also it ran fine without a tune right? I’m getting a tune but it might be a few days is why I ask. I’ve watched all your videos man, just want to verify.
Truck looks Perfect IF you are going for the clean and classy modified look. Which I would def do bc its a Platinum trim. I would not change the wheels, BUT would run some spacers for sure, it looks like it needs them. Love the look man u had good judgement and execution on that one. Stay safe and healthy everybody!
Damn that looks clean!! Let’s see how she looks with 2” spacers on there🤔 I’m trying to do the same set up, but I’m on a leveling kit. Keep up the good truck content. That’s what I’m here for! Haha! Mustang’s pretty clean too
@ thanks for the quick reply. I heard it could be a problem with the steel control arms I’m sure all 2013 have steel control arms. If you jack up the truck and suspension is at full droop the boots contact the lower control arms. That’s why I was wondering
![ROSÉ(로제) - APT. (Band VER.) (With. 이영지) [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/IW8qaemx74g/mqdefault.jpg)
@1:12 Got to do a lift instead of a level because 12.5 inch are way to wide for a level. I personally have the 35’s with a level (295/65r20 Toyo Open Country RT which are 35x11.5) on the stock rims with zero poke (2023 Lariat). I personally like the taller but skinner tires. Your setup does look good.
I realize your video is a few years old, but a couple of questions: is this a 2WD? What brand of lift kit did you use? Your truck looks great. Thanks
Keep it like that a little rubbing won’t hurt nobody it ll clearance itself lol
This is sweet I’m doing 6 inch lift factory 20 inch wheels and 35x12.5 with 2 inch spacers
Almost as tall as a F-250
Very clean.. less is more!
Did you have any problems with the cv axles boots rubbing on the lower control arms?
Make sure you install camber bolts those trucks do not come with camber bolts that's why no shop could align it properly
Thank you sir
Looks sick!... I pretty much have the same ride except I'm on a 2-in level with 33s... But I've been wanting to move up to 35s on a 3-in.. I am definitely a fan of the tires running flush with the body... I am not one for poke so this is definitely right up by alley!. Thanks for posting this video 👍🏽👍🏽👊🏽
I know it is pretty off topic but does anybody know of a good website to watch new series online ?
@Ahmir Mason Flixportal xD
@Zeke Layton thank you, I signed up and it seems like they got a lot of movies there :D I really appreciate it !
@Ahmir Mason happy to help :)
A 1 inch spacer all the way around would look sick
I heard mention of 13mpg a few times during the video, was that average for both city and highway? I have a '14 Platinum EcoBoost and been looking around at a few options.
I got a 2012 with 6 inch and 35s and am fixing to throw a 3 inch body and 37s on it
This is nice been waiting on this but idk why I haven’t been getting notifications from RUclips about your videos
Attitude is all in the altitude.
What lift kit did you use. Went through the video but can’t seem
To find where you said it.
Clean look great choice!
what lift kit did you get? i have the same truck but in white lol and i’ve been looking for some upgrades
I did the same thing on my 15 z71 with 33x12.50 r 18 and it drove ruff as hell.. noise down the highway lol
Truck looks amazing bro 😎
Thank you sir!
Run them spacers. I had them back when I had my f150 towed a heavy trailer all the time an never had a problem.
Which ones you have bro?
They were some cheap eBay spacers. If you really want something good check out far from stock, watch a whistlindeisel RUclips video and you’ll see how good they are lol@@ReyesBuilt
You got a 3 inch in the front dis you put anything in the rear ?
Could u get different upper a arms for it not to rub?
The a arms are different, just need different wheels or less wide tires
@@ReyesBuilt oh ok
Truck looks 💯 like that bro don't do spacers but maybe definitely some aftermarket wheels down the road!!!!
What brand of arm did you buy?❤❤
No quema cuh
Looks awesome.
Big improvement, I can see a matching racecar trailer with an S N 95 on it.💪
How did it effect ride quality
@@BoThompson-ql5lz not much at all, that’s why I went with a small lift
I got 33s on my 12th gen eco, you bout to hate that hwy fuel mileage now but looks dope.
Just did a 400 mile road trip and got close to 15 mpg.. wasn’t bad
@@ReyesBuilt that's about what I get. Was getting 19-20 so it kinda dents me during deer season
Yeah most I got was 17 maybe 18 on the freeway so I’m satisfied having 35’s
😆😆 yeah and especially with those tire general grabber x3 they are heavy mud tires but are amazing off roading from my experience best tire I’ve had installed on my truck
Clean
What brand lift did you use?
If your extended warranty isn't through ford, a tune wont void the warranty. Couldve been tuned before you got the truck... BrewCityBoost tune is the best thing I've done to my ecoboost. And a cold air intake from CVF will make those turbos auditable as hell. I hear mine whistling all day now
Awesome man! Thank you
Hey what spark plugs do you run in your mustang? I’m doing same heads and cams.
Ngk TR6
Thanks so much for that! And also it ran fine without a tune right? I’m getting a tune but it might be a few days is why I ask. I’ve watched all your videos man, just want to verify.
@@justinsmith3572 ran great without a tune. Made 270hp on the stock tune
@@ReyesBuilt ok thanks for the input!
What lift kit is it??
Truck looks Perfect IF you are going for the clean and classy modified look. Which I would def do bc its a Platinum trim. I would not change the wheels, BUT would run some spacers for sure, it looks like it needs them. Love the look man u had good judgement and execution on that one. Stay safe and healthy everybody!
Have you put the 2.5 spacers yet on it?
Not yet
Damn that looks clean!! Let’s see how she looks with 2” spacers on there🤔
I’m trying to do the same set up, but I’m on a leveling kit.
Keep up the good truck content. That’s what I’m here for! Haha!
Mustang’s pretty clean too
Venom Rex +12 offset. Thank me later king
What lift did you use?
What lift
Nice rig is it a 4x4.
Yes
What size tires?
35’s
That engine tick is awful!🤧
Yup, glad I got rid of it
Did you have any problems with the cv axles boots rubbing on the lower control arms?
@@swishajay nope, tires did rub the control arm and full lock though
@ thanks for the quick reply. I heard it could be a problem with the steel control arms I’m sure all 2013 have steel control arms. If you jack up the truck and suspension is at full droop the boots contact the lower control arms. That’s why I was wondering
Oh dang you sold it. Thanks tho. Ima bout to watch that video
@ yessir! Thanks for watching the vids!