If you want to hear the intake sounds more then remove the front plastic shroud thats partially covering the intakes. It serves no purpose but to "filter" the air coming in and removing it will bring more airflow = more sound & performance. Just make sure to clean them every couple of months and there shouldn't be any problems 👍👍👍
Did you watch the racebox video with the differences on the dyno comparing all the intakes? The 3 inch is slightly better for that top end power but for that nice torque curve the 2.5 is much better. The 2.5 also retains the 3 inches top end up until like 500 before redline
Yeap thats why I kept the 2.5 inlet in. And also, Alex stated the 3inch would be better with an upgraded turbo with a bigger compressor inlet rather than the stock 2.25 inlet
![2023 Nissan Z Intake Showdown: AMS vs Boosted 6 vs Stock - Dyno Tested and Compared![RACEBOX Z Ep11]](http://i.ytimg.com/vi/0ZQ6ch0ighc/mqdefault.jpg)
![2023 Nissan Z Intake Showdown: AMS vs Boosted 6 vs Stock - Dyno Tested and Compared![RACEBOX Z Ep11]](/img/tr.png)
If you want to hear the intake sounds more then remove the front plastic shroud thats partially covering the intakes. It serves no purpose but to "filter" the air coming in and removing it will bring more airflow = more sound & performance. Just make sure to clean them every couple of months and there shouldn't be any problems 👍👍👍
Love the color! Sounds amazing! Love how these love modded 🚀🚀
By far best videos to watch thank you!💯
Thank you boss! 🙏🏽🙌🏽
Im literally can’t wait to get mines and im just getting in tune bro 🔥🔥🔥🔥
brother You have a perfect configuration the only thing you have to change is the stock y pipe
Congrats on the growth of the channel bro!
Thank you brotha I appreciate it! 🙌🏽🙌🏽
Did you watch the racebox video with the differences on the dyno comparing all the intakes? The 3 inch is slightly better for that top end power but for that nice torque curve the 2.5 is much better. The 2.5 also retains the 3 inches top end up until like 500 before redline
Yeap thats why I kept the 2.5 inlet in. And also, Alex stated the 3inch would be better with an upgraded turbo with a bigger compressor inlet rather than the stock 2.25 inlet
BMS inlets and some air filters would’ve got ya the same outcome tbh for way less but B6A 3in intakes will be useful on upgraded turbos
Very true thought about it but I really like that I can switch to 3inch without a problem when I upgrade my turbos
Love the whip. What is done to it so far? Sounds beautiful
Hey wsp for Cory I was asking how can I get the boosted 6 intakes sounds dope
whats ur mods, 419 for a rs with a tune is considerably low, granted im not sure wat u have done
What do you think it should be around?
Would def keep the bovs on that way you can get maximum turbo sound from the q
Ahhh it’s just not the best when it comes to max power and racing!
Mini GTR ❤😢
Ams intakes are for power n boosted 6 for sound I heard or Watcha think about ams?
if a normal q60 lux had the same mods as yours heat exchanger, exhaust, lower downpipes, intakes, tune would it push out same hp?
Depends what brands of parts you run but you should get 400-450whp & 450-500tq if installed and tuned correctly
Did you sell your blow off valves yet? If not bruh, I'm interested. I have a 2019 Q60 Red Sport
Man I did end up selling them! Sorry but nice you’ll love your Q60 just like I do!
Whats your exhaust setup?
14k coming soon!
Man!! It’s coming up faster than I thought! 🙌🏽
What are you lowered on??? Thx in advance
Bagged on airlift 3P
Exhaust?
Custom 3inch exhaust 🫡
First comment!
Yes you are!
the no follow back is crazy 😭🫶🏽
Haha, He got a shoutout though !
Mbn
Says the sensei with 800hp GTR 😂
Typical RUclipsr trying to sound like fresh kicks 😂 no one can be authentic anymore 😂
Hater.