6-Minute Intro to ~25 Leatherworking Tools | Quick Reference for Beginners
HTML-код
- Опубликовано: 12 июн 2024
- Today I go through a wide variety of leatherworking tools, as quickly as I can.
I've used the tools on camera when possible, to show the sorts of things they can be used for.
On an unrelated note, has anyone got any contacts that can exorcise a shed? Something appears to be putting notes in the videos...
TIMECODES
===========================================
Cutting Tools:
Multiple General-Purpose Knives - 00:20
Skiving Knife - 00:45
Skiver - 01:03
Ruler - 01:13
Scratch Awl - 01:18
Strap Cutter - 01:28
Hammered Tools and Punching Tools:
Metal Hammer - 01:48
Rawhide/Nylon/Polyester (Soft Headed) Hammer - 01:56
Hole Punches - 02:17
Crew Punch/Oblong Punch - 02:37
Hardware Setters - 02:52
Letter & Design Stamps - 03:08
Stitching Tools:
Wing Dividers - 03:19
Edge Groover/Creaser - 03:28
Overstitch Wheel - 03:46
Awls - 03:59
Stitching Punches/Pricking Irons - 04:18
Leather Needle - 04:52
Stitching Pony - 05:09
Thread Snips - 05:25
Finishing Tools:
Edge Beveller - 05:30
Edge Slicker - 05:43
Bone Folder - 05:59
LINKS
===========================================
Instagram - / sharps.workshop
Etsy - www.etsy.com/uk/shop/SharpsWo...
Email - sharps.workshop@gmail.com
GEAR
===============================================
Canon M100 with Meike EF-M to EF/EF-S adapter
Canon 50mm f1.8 STM
Samson Meteor microphone with cheap eBay stand (ceiling mounted) - Хобби
Thanks!
I had to give a like👍 for your thoughtfully drawing for us the tools you didn’t actually have.
Very helpful
This quick intro was really pleasing. The video and editing quality was +++. The voice narration is tonally pleasing too. I also thought it was clever that you were able to slip in a bit of subliminal satanic subversion within your 6 minutes.
I love the funny stuff in this video, like the lil SATAN in the corner XDD thank you for bringing extra fun to the craft
Well good! Thank you Sir. I am just entering the leather working arena and your summation was brilliant. Cheers - M
Thanks for the information I’m doing a school project and it helped alot
Thank you for the great information! I really appreciate it.
Thanks very much!
Good video for knowledge
i keep using the metal hammer on my small children and it seems to be holding up fine, is an upgrade to a wooden one really necessary?
Nice :)
Thanks!
Can a skiver be used as a "fleshing" tool, so as to remove flesh from rawhides after slaughter?
I love you.
I would say it back; but seeing as this is the internet and you could be a labrador for all I know, saying it back may be illegal. Thanks for the positivity!
Where did you get your custom stamp from? And how much did it cost if you don’t mind me asking?
I got it from a company called Artisans UK as far as I can remember - although it may have been a similarly named Etsy company based in China (I can't remember!). Artisans UK are found here anyway - www.artisans.co.uk/, and I've only ever heard good things about them.
Sharp's Workshop that is great thank you, I’m from the UK and most things seem to be from the US and have a high delivery cost and time so it’s nice to use a UK based company
How about the adhesive to be use?
The adhesive is a matter of choice - a chap called Ian Atkinson did some great adhesive content that might be worth a look. I use Ecostick 1816B though :)
hi whats. the red punch pad material?
Hello! It's just one from eBay, with the title "Leather Craft Red Rubber mute punching Board Cutting Hole Punch Stamping Tool".
It's about 8mm thick, which means I never worry about going through it - the rubber material is non-blunting too.
It's basically a knock-off Poundo board. I don't particularly recommend this one - there are plenty out there, this is just the one that I happened to cheap out on!
Death Satan he is here
Oh no
@@SharpsWorkshop is that the message you Gave us lol
🤣
Satan? Really? 5.21 mark.