$1100 vs $720 Amps from 1998 - Lanzar 50c vs Crossfire CFA-30HC [4K]

Поделиться
HTML-код
  • Опубликовано: 6 ноя 2024

Комментарии • 297

  • @JaiJohnson-l1u
    @JaiJohnson-l1u 3 месяца назад +2

    Won 3 1st place trophies with lanzar 50c 4 RF Dvc down to 1ohm in a street car no sponsers 150db. A hood car im so proud

  • @rossrockey4803
    @rossrockey4803 4 года назад +3

    I had a summer job at a stereo shop in 94 and was a faithful subscriber to Car Audio mag. This is all the bad ass shit I used to sell and install. My boss gave me a Lanzar 50Cs, and my little Cavalier was the envy of all my friends, lol. Sadly the car and stereo were stolen, thanks Ruthless Customs. Now I don't feel so bad since that amp wasn't all that great anyways. I just wanted to say thanks for bringing back the memories with these old school equipment reviews.

    • @rossrockey4803
      @rossrockey4803 3 года назад

      @Frank Bonazza III he owned the shop and constantly redid the installations in his personal competition cars. It was a used amp out of his car. Why do you even care?

  • @LuxorVan
    @LuxorVan 5 лет назад +5

    So I notice you said you would run the crossfire in high current mode, but if you look, you have the fuses in high power mode, though the green lights indicate high current "maybe I'm missing something"! In the manual in high power mode it says it can only handle a 2 ohm mono load, but can handle the 1 ohm mono load in high current mode. I was just watching the 15 hc video you uploaded as well in 2015. Still awesome Video!

    • @wal
      @wal  5 лет назад +1

      For this test I wanted it to closely match the 50c, well at least as close as possible. The Lanzar has a larger heatsink and fan and could probably run 0.5 mono all day without breaking a sweat

  • @derekvasile6127
    @derekvasile6127 5 лет назад +3

    The crossfire is badass. Thanks for the videos👍

  • @davidgilbert6924
    @davidgilbert6924 5 лет назад +4

    Big D wiz love what you do I fell in love with car auido around 1992 cut my teeth on blue thunder 12s and a punch 150 amp in a Crx alpine tape deck running Sony mids and tweets its was one of the loudest around for such a low watt system could hear the bass for 2or3 miles as the car drove away man those were the days

    • @wal
      @wal  5 лет назад

      Yeah boi!

    • @MuvoTX
      @MuvoTX 5 лет назад

      mtx blue thunders were the real deal... werent they a circuit city exclusive? I had a pair of terminator 12's... cant remember what they were tuned to. it was about 128 iirc.... good times

  • @shanen921
    @shanen921 5 лет назад +1

    Great video Big D. Thank you for the time you put into your videos.

  • @joelpate4683
    @joelpate4683 5 лет назад +4

    Man brings back some good memories. Back in 2000 I had a CFA-30HC on two JL w6 12s in a 99 honda civic hatch back. To it to a USAC show. They put me in the 0-99 watt class (LMAO) I put up 151.6 db. Took first place. Good ole days...

    • @pyro4life64
      @pyro4life64 5 лет назад

      Those were the days it was a hole different world back then.

    • @batsonelectronics
      @batsonelectronics 5 лет назад

      when I competed in 1988 it was SPL, waveform, and install quality. At least in TX where I competed.

  • @bigassfordsd
    @bigassfordsd 5 лет назад +1

    I still have a crossfire vr 302 2 channel from 2002, it was bangin a single 12 hard up untill two weeks ago when I bought a new truck. She is a lil beat up looking, but one of the best amps I have ever had. I love me some old school stereo.

  • @SlowSpyder
    @SlowSpyder 3 года назад +2

    I still have a Crossfire CFA1000D and two Audiomobile MASS 12's in my garage. My set up from 2005.

  • @wal
    @wal  5 лет назад +6

    Shop for New Crossfire Amps: lddy.no/vfxd
    See playlist of Amp Dyno Drag Races: is.gd/ampdynodragraces
    See more about Old School SPL Challenge:
    www.oldschoolstereo.com
    facebook.com/groups/oldschoolspl2019/
    See my other videos on Old School Cheater Amps:
    ruclips.net/p/PL6519F5277A57F8BA

    • @dietershobbypakanal
      @dietershobbypakanal 5 лет назад +2

      Ps you and Exo are the best.. but steve is cool too 😊👍

    • @MFXdump
      @MFXdump 5 лет назад

      Williston Audio Labs
      I’m just about getting ready to give up on EBay for audio equipment. I’ve been trying to get 4 Orion XTR 2 ohm 10’s. 2 sellers have them posted. But have none in stock. Skar Audio was however, Awesome to buy from. Got that 2000.1D in the truck! But nothing to use it on. Lol!

    • @davidlarue5713
      @davidlarue5713 4 года назад

      I was (kinda) dissapointed in the Lanzar, especially at that price. Who knew the Crossfires had that kinda power.....i didn't......

  • @ThomaslSylvester
    @ThomaslSylvester 5 лет назад

    I like this quick format. The high speed transitional shots tie together your commentary. Nice man

  • @alanstant9356
    @alanstant9356 5 лет назад +1

    Pretty cool test man. I had both brands of amps and I I know I liked the crossfire the best. That's just proves my theory correct for power handling. Thanks for sharing derek.

  • @bryanrails3428
    @bryanrails3428 5 лет назад +1

    That was cool to watch, thanks Big D! I actually a black 50c in my garage. Just had Steve Mantz repair and am afraid to use again. I’m an old Lanzar fan from the HS day’s and they still play clean but that Xfire was for real.

    • @wal
      @wal  5 лет назад

      Thanks for watching and commenting!

  • @DefWun
    @DefWun 5 лет назад +2

    I had a few Crossfire's and was always super happy with them. A mint VR1000D and an old school BMF series 2 channel (can't remember the model) that were both so clean and powerful. Regret selling the VR to this day.

    • @wal
      @wal  5 лет назад +2

      Sweet! I’ve never tried the VR series

    • @DefWun
      @DefWun 5 лет назад

      @@wal They're either partialy or fully US made (can't remember) and have really good build quality. They were strappable also. I had the 1000D and there was also the 2000D which was just two 1000D's strapped inside of a big heatsink. Crossfire is my second favorite company,next to Rockford.

  • @cutweldngrind
    @cutweldngrind 5 лет назад +2

    I'm not a Crossfire fan but I was impressed. I did own 2 or 3 crossfire smaller amps in the past.

  • @RocksConcreteMinerals
    @RocksConcreteMinerals 5 лет назад +1

    Crossfire with Autotek 12's circa 1998 is what I ran and hit 134.2 DB at a comp in 98. 2x12's and this very crossfire amp. What memories

    • @wal
      @wal  5 лет назад +2

      😬🤙

  • @trucavalier
    @trucavalier 5 лет назад +3

    Whewwwww! Those boards are beautiful for 1998

    • @wal
      @wal  5 лет назад +1

      No doubt! Crossfire is 9.5/10 overall and Lanzar is 8/10

  • @holeshotinspectionllc2412
    @holeshotinspectionllc2412 5 лет назад +4

    Crossfire is putting in work now too, my first system was in 1999 in a Ford ranger lol all Memphis I remember paying 1200 for my Memphis Bell 🛎 lol now I’m running all DD I have 4 DD 615s and a DM 2500 no wall 10 in aero port in a Dodge Caliber doing 150.00 not bad for low wattage doing knarly hair tricks on low power it was about efficiency back in the day, did my first USACI comp lots of fun, this vid brings back memory’s the Lanzar van started my addiction lol 😂

  • @Brock_Landers
    @Brock_Landers 5 лет назад +1

    I used to have one of those Crossfire amps and it pounded my 4 Kicker Solobaric 10s in my Integra, and later my 2 Orion Cobalt 10s in my 89 Beretta GT with American Racing 5 stars on it...lmfao I didn't have this particular model, but I loved that amp.

  • @Long-nd8bq
    @Long-nd8bq Год назад +1

    I've got the Lanzar Opti-Drive 2500 in my garage. It was stolen from my car back in the early 2000's. I got it back years later from a police evidence room but it turns on and then turns off. Of course they never tested it before returning it to me and the guy who stole it got off with probation. I don't know if it can be fixed so it sits on the shelf in the garage. It ran 2 15" Punch DVC 15's in a sealed box in my Thunderbird SC and it pounded harder than any other system I had heard back then.

  • @fiolds350
    @fiolds350 5 лет назад +3

    I never got into the crossfire. But im impressed now

  • @Jt19702
    @Jt19702 Год назад

    Crossfire is so underrated as a company. They have been consistently providing quality products since the 90’s.

  • @bass321head
    @bass321head 5 лет назад +1

    Awsome video derek..brough back some memories i had a lanzar 2500 back in the late 90s..id love to see you do a test on one of thoae for fun..

  • @MuvoTX
    @MuvoTX 5 лет назад +2

    Hey Big-D... you gotta hunt down a "goose neck" graphic EQ. Those things were wild. I think Blaupunkt and Sony had them. IIRC they weren't cheap either.

    • @wal
      @wal  5 лет назад +1

      I have a Pyramid BNIB, will show it in future episode

    • @MuvoTX
      @MuvoTX 5 лет назад

      @@wal nice Derek!!! cant wait for that episode. I had PLENTY of pyramid amps in high school... when youre broke you do the best you can!!

  • @kathygarber3230
    @kathygarber3230 5 лет назад +2

    Crossfire has always been at the top of there game and still going strong.

    • @delvinchandler
      @delvinchandler 5 лет назад +1

      I had two pioneer impp 12's and a crossfire 2 channel and that thing was banging

  • @franciscogarnica802
    @franciscogarnica802 5 лет назад +1

    I sold 2 of those crossfire amps a while ago never used them very impressed!

  • @biffisgreat
    @biffisgreat 5 лет назад +2

    The crossfire is really really really efficient!

  • @paulhuntjr.1619
    @paulhuntjr.1619 5 лет назад +2

    I feel old now!! Hahha!! Those were AWESOME to see. I miss those days of car audio.

    • @michaelhollon5332
      @michaelhollon5332 5 лет назад +1

      Same here. But at the same, time some of the new car audio is amazing.

  • @joshhanson6777
    @joshhanson6777 5 лет назад +2

    that Crossfire is a work of art

    • @wal
      @wal  5 лет назад

      She’s a beaut, Clark!

  • @homebody0089
    @homebody0089 5 лет назад +1

    I need to find me a XFire amp when I get back into the game. It would be perfect for a daily driver who wants a little bump in their car. I do miss when amplifiers were made here in the greatest country in the world (That's the United States of America, for those who are a bit confused)
    And how come I can't seem to find any car audio magazines in box stores? Do I have to order a subscription like I do my kinky leather mags and mail in a check to some shady company?
    Thank you again for your time and for showing us who is the real champion.

    • @JYAN2852
      @JYAN2852 5 лет назад

      Crossfire amps were made in South Korea actually. Many old school amps from late 80s thru 2000's were Korean made. What's funny is that the manufacturer that made Crossfire amps also made the same amps for Hiphonicus, Hard Rock, and other brands most people have never heard of. Coustic were also Korean made amps from the 80s and 90s, also very nice amps

  • @MoparStephen
    @MoparStephen 5 лет назад +1

    Wow! I forgot all about Car Audio & Electronics magazine. Thanks for the memories.

    • @wal
      @wal  5 лет назад

      Thanks for watching and commenting!

    • @bobdodge3171
      @bobdodge3171 5 лет назад

      I miss mine had them from 93 to the 97. My ex wife got tired of looking at them in the closet.. Tossed them out when i was out of town working... "They were out dated she said"....

    • @MuvoTX
      @MuvoTX 5 лет назад +1

      Yeah ... I spent countless hours searching through the CA&E directory... trying to find the killer amp, for my budget. I eventually settled on Hifonics series VII and Carver i-Series amps in a SQ system.

    • @bobdodge3171
      @bobdodge3171 5 лет назад +1

      @@MuvoTX was nice looking at all the specs, prices from all the manufacturers.. Some haven't heard of till you saw it in the directory.

  • @juanpabloramirezjimenez4002
    @juanpabloramirezjimenez4002 4 года назад +1

    Crossfire vr1000 my first amplifier of this brand would never leave them.

  • @nanceeleana
    @nanceeleana 5 лет назад +1

    It's so nice to see the Made in the USA ...not found much in car audio anymore.

  • @envisionelectronics
    @envisionelectronics 5 лет назад +1

    The fuses in the crossfire WERE in the correct location for High Current. Unless the B roll shows something different, you tested the amp in High Voltage mode.

    • @yoplaitmajor
      @yoplaitmajor 5 лет назад

      I noticed that too How bout it @Williston Audio Labs?

    • @justinwilliams2588
      @justinwilliams2588 5 лет назад

      This is what I came to say. In both shots of the back of the crossfire it shows fuses to be in High Power instead of High Current.

  • @HK47Elite
    @HK47Elite 5 лет назад +1

    I have this roughly ~97 precision power pc2600.2 I’ll send your way for testing when I get the board repaired sometime if you would like 👍🏼

  • @HoUsEoFcAtS78
    @HoUsEoFcAtS78 5 лет назад +2

    Crossfire boards are always beautiful!

  • @rich1051414
    @rich1051414 4 года назад +1

    People knew all about that crossfire amp locally back when I was in school. Over $700 was still a lot of damn money, though, at least for us high schoolers :P

  • @HifiVega
    @HifiVega 5 лет назад +1

    Crossfire don’t play dat! Loved the short history info with the zines.

  • @Adamhc75
    @Adamhc75 5 лет назад +1

    It's interesting how the Lanzar is using nice name brand caps and the Crossfire is using (subjectively) lower end caps in the power supply section.

  • @timothygray7650
    @timothygray7650 9 месяцев назад +1

    Lansar was another good choice.

  • @VyKingX1
    @VyKingX1 5 лет назад +1

    All in all both amps did well in my opinion. But crossfire killed it.

  • @msnapp169
    @msnapp169 4 года назад +3

    Why no 1 ohm test at the end??

  • @ehrenkrause9861
    @ehrenkrause9861 5 лет назад +1

    I wish I could have seen this video 2 years ago when I seen a couple nice Crossfire 30 HC's for sale and for affordable prices compared to what I paid for the Orion HCCA and US Amps VL I bought before then. I didn't know much about Crossfire but a lot of people give them praise it's just at a time but I kind of dropped out of car audio before I got back into it

  • @robland6118
    @robland6118 5 лет назад +2

    So in the old school comp these would fall under the 100 watt amp placement?

    • @MuvoTX
      @MuvoTX 5 лет назад

      Wattage classes when I competed in 90' were determined by the total 4 ohm RMS wattage of the system in the vehicle. Take all the amps and add up total wattage. So a vehicle with a total of 100 watts or less would qualify for that class. If you had say 4-5 of these amps in a single system, add up the 4 ohm system wattage and determine your class.

  • @michaelhollon5332
    @michaelhollon5332 5 лет назад

    Your the undisputed king of amp dynos!!

  • @BARBELLS-AND-BUDS
    @BARBELLS-AND-BUDS 5 лет назад

    Crazy prices and great video dude 🔊

  • @shtfvan8084
    @shtfvan8084 5 лет назад

    Thank you!!!! Got one of these about 6 months ago. Can't wait to hook it up.

    • @michaelhollon5332
      @michaelhollon5332 5 лет назад

      How could you look at it for 6 months, without hooking it up to something? That would Drive me nuts.☺

    • @shtfvan8084
      @shtfvan8084 5 лет назад

      @@michaelhollon5332 lol I know right. I have a collection of crossfire cfa amps, crossovers & equalizers. Crossfire was my first amp givin to me by my big brother. Can't remember which one it was but it pushed two infinity kappas 12s in my 2 door ford explorer pretty dang good. Gave it to a friend way back when. This was probably 2002 or so. Always been a fan of crossfire since. Had to add a few to the collection. Probably gonna hook this cfa 30hc up to 4 10s in my van in the near future. Gonna try and display a wall of old-school amps once I finish off interior. Sorry for short novel. Cheers!

  • @shakeelfaris7623
    @shakeelfaris7623 5 лет назад

    Hi there. I have just finished setting up the system in my 2011 E90. The source unit is a DEH 80PRS and the amplifier is a JBL GTR 7535. There is a dilemma I have run into. When testing for max volume at the headunit, depending on where I connect, it clips at different volumes, so for the sake of argument, on the front channels it clips at 59 out of 62 on the rear it clips at 60 out of 62 and on the sub it clips at 58 out of 62. This part is fine, I just stick to 57 and plug the RCA's into the amplifier. When I hook my mini oscope to the speaker output channels, even before touching the gains, I have to turn the volume down at the headunit to 50 in order to get a clean signal. There is a switch on the amplifier that says "Low, HI1,HI2" and the manual says to use the setting at Low if using line level signal. Now the thing is on the sub channel, I don't need to touch the gain at all and the other two I need to slightly. Is the amp underpowered? Is there something I am missing? Thanks

  • @Hummin_Along
    @Hummin_Along 5 лет назад +2

    You should do some Eclipse amps. I still have a EA2000 that looks brand new. Also you ever test any CT Sounds stuff?

  • @ufopulse
    @ufopulse 5 лет назад +1

    That crossfire woulda been dank in my civic hatchback in 1998 bumpin those fosgates

  • @paulking7701
    @paulking7701 4 года назад +3

    Just picked up a Crossfire CFA 30 HC today. Found one local after watching this video 😎

    • @wal
      @wal  4 года назад +1

      Beast amp!

    • @imskjrpops6389
      @imskjrpops6389 3 года назад

      @@wal I got a question about the Lanzar Opti 7001D. Do you recommend this amp? I found a good deal on one but I haven’t really heard anything about them.. thank you for your time....

    • @kingcosworth2643
      @kingcosworth2643 3 года назад

      How does the 602 compare with the 30 HC?

  • @nate_d376
    @nate_d376 5 лет назад +1

    Looks like a game of operation when you change the fuse locations...lol

  • @waltkosch
    @waltkosch 5 лет назад +3

    Hey Big D. How about some Phoenix Gold 🌀 action please and thank you. :)

    • @wal
      @wal  5 лет назад +1

      Yeah boi!

    • @MuvoTX
      @MuvoTX 5 лет назад

      yep!!! phoenix gold cyclone!!... just do it big-D...!!!

  • @richardsalinetrojr1957
    @richardsalinetrojr1957 4 года назад +1

    Holy hell.for shits and giggles I decided to look up the crossfire amp simply because I've had 1 sitting around doing nothing but collecting dust for about 15yrs and was curious to its power.didnt think I'd actually find it on here considering its age.figured it put out a lot more then the 30Wx2 it says on amp but damn I had no idea this thing can put out over a 1000watts.may have to hook it up and see if it powers up and is still useful.if not think I may have to contact amp labs to see about getting it going again.said part is idk wth I even got the amp or why.lmao

  • @sterlingslayden5285
    @sterlingslayden5285 5 лет назад +2

    My dad was sponsored by Lanzar back in the early to mid 90s. I still have one of his amps. A 100 watt opti two channel. When I was a kid that amp hit pretty good on two 12s mxt. Sure it wasn't the loudest on the block, however his Sq was on point. he could tell if I messed with the settings when I was kidding to impress my friends lol.

  • @deluth4638
    @deluth4638 5 лет назад

    8:16 That's how I install fuses, too. Only difference is, I yell "HAI" at the same time like I'm delivering a judo chop.

  • @xxg0t3mxx
    @xxg0t3mxx Год назад

    i have a early 2000's crossfire class D still in decent shape they went off power then but i ran 1 on a crossfire xt2 15 during comps would do 151 on a single 15. that amp rated @ 14.5v said it would do 1500 watts i also ran mine since the sub was dual .7 @ .35 ohms and man that thing would slam!

  • @darrylpioch2055
    @darrylpioch2055 Год назад

    Couldn’t see what semiconductors were on the output stage of the crossfire but on the lanzar it’s worth pointing out that every single high power semiconductor for the output stage AND the power supply section is ST Microelectronics and that’s high-high end. That’s why the amp is so expensive. Those BJTs ain’t cheap haha

  • @mrexon
    @mrexon 5 лет назад +3

    More gain!! More gain on that amp

  • @pyro4life64
    @pyro4life64 5 лет назад

    Still have two mint shape Crossfires sitting in the basement the last one I bought was to have a spare. I saw the link and was surprised by the asking price I couldnt give one away a few years back when I tried to sell one of them.

  • @iceman45ification1
    @iceman45ification1 5 лет назад +1

    I'm sold on that Crossfire!! 😍👌

  • @littlejln213
    @littlejln213 4 года назад

    OK. So I got my first one last week on accident. It was listed as a 15 hc. It came painted but it's a 30hc, then yesterday another popped up on ebay... I had to buy it. So I will have a matching pair of 30hcs!

  • @EPICRANDOMGUY02
    @EPICRANDOMGUY02 5 лет назад +1

    So I'm the early days the power ratings were typically higher than stated? Or is that just for this brand/specific amp? All the modern ones seem to perform worse than expected.

    • @wal
      @wal  5 лет назад +1

      Many amps were rated at lower voltages and low THD. Example, Crossfire is rated at 0.008% THD at 4 ohms

    • @EPICRANDOMGUY02
      @EPICRANDOMGUY02 5 лет назад +1

      @@wal Ah that makes sense, thanks for the replies! Love the channel

  • @researchandbuild1751
    @researchandbuild1751 4 года назад

    Those old amps were sexy as hell inside , pretty colors and giant toroids and transistors. Just sexy layouts and everything

  • @exeris2037
    @exeris2037 5 лет назад +1

    I would like to see old school G&S c1000, or c2000. I know they underrated. Almost blew fosgate power 10s out of box, with my c1000. Said 100watt ×2. Amp long gone but I'll never forget the fun I had

    • @VisionSandS
      @VisionSandS 5 лет назад

      G&S Designs were the shit. I had some Redline subs and a couple of their amps. Them 15's got down and dirty

  • @carlwillows
    @carlwillows 5 лет назад +1

    That Crossfire, what a deal!

  • @blech71
    @blech71 5 лет назад

    I had the old LANZAR amps... the big black ones with the cool red lettering... I had a 500 for subs and a 240 for mids/highs... then I HiFonics Zues and Aphrodite for the same combo... all those including Autotek came out of the same factory in the valley down by Chatsworth if I recall. HiFonics was always my favorite. That Zeus was the king back then. POWER FROM THE GODS!! Such great looking amps. Not the confusing naming convention they have now and the non matching size and looks.
    But I hear the Brutus series can wreck shit when given good clean power without breaking the bank.

    • @AnthonyDiSano
      @AnthonyDiSano 5 лет назад

      Same here. I found the old Lanzar's with the red lettering were about the same as the HiFonics of the same era. They both kicked ass and both were designed by Zed Audio IIRC. I had the same setups as you. A 500 on subs and a 240 on the mids/highs. I then had a Zeus and a smaller HiFonics for the mids/highs. I can't recall which of the smaller HiFonics I was using at the time, though. I can't speak for HiFonics but I know for sure Lanzar was out of Chatsworth. I always regretted selling that 240 however I still own most everything else that I had in the early to mid 90's.

  • @thebassgeneratorinc229
    @thebassgeneratorinc229 5 лет назад

    it was a battle of the watts rated vs output wattage that orion and Phoenix Gold....I love the Sound Stream Reference6.0

  • @johnelrod98
    @johnelrod98 3 месяца назад

    I had one of these about 3 years ago, sold it for 200 it had a missing rca ground shield but still worked correctly, I kinda regret selling it but I only paid like 35 bucks for it.

  • @charlesdawson6992
    @charlesdawson6992 5 лет назад +1

    Can you dyno a hifonics colossus I had one on 3 JL W6, but the amp would always get hot and go into protect, so I'm curious to know what it does.

    • @wal
      @wal  5 лет назад +1

      Right around rated 😁

  • @jordanciaramitaro6351
    @jordanciaramitaro6351 5 лет назад

    I would like to see how the old Memphis ar-hc50 and ar-hc100 stack up. They were pretty stout, I know I mentioned in the past the crossfire and Memphis amps were similar across most models but the boards on their high current amps look completely different.

  • @1625a5
    @1625a5 5 лет назад

    Very interesting video. I have been enjoying car auduo from late 90's. Now in my car, punch400.4 still works good. I heard that crossfire is made in asia and very cheap one. But I have to change my mine now to see this video.

  • @thebassgeneratorinc229
    @thebassgeneratorinc229 5 лет назад +1

    that 0 to 150 class was a beast class back then

    • @batsonelectronics
      @batsonelectronics 5 лет назад

      I don't think it existed in the late 80's when I competed. I ran in the

    • @thebassgeneratorinc229
      @thebassgeneratorinc229 5 лет назад

      check again my friend, I ranIASCA 0 to 150 and 151 to 300 class in 90 thru 94 in Pittsburgh and Ohio.
      we never had any USAC shows around that time in that area.

    • @thebassgeneratorinc229
      @thebassgeneratorinc229 5 лет назад

      I am not sure which oganization that you were refering but as it is now, there were many organizations that hosting events

    • @thebassgeneratorinc229
      @thebassgeneratorinc229 5 лет назад

      I think by the looks of it, you are refferi g to the format displacement format and nlt wattage class

    • @thebassgeneratorinc229
      @thebassgeneratorinc229 5 лет назад

      Autotek had those nice lttle Mean and Street Machine amps and subs and of course those legendary HCCA amps of that era

  • @carlosnelson1236
    @carlosnelson1236 5 лет назад +1

    The crossfire look like is has bigger copper traces for better current flow.

  • @caseyturner8773
    @caseyturner8773 2 года назад +1

    I miss my old crossfire

  • @jaz97
    @jaz97 5 лет назад +1

    Yea those Crossfires where beast

  • @floydbeard5073
    @floydbeard5073 5 лет назад

    Very cool video Big D🤙🤙

  • @MuvoTX
    @MuvoTX 5 лет назад

    Awesome big-D. How come the crossfire didn't pop its 80A fuse ? Were the peak current draws too short?

    • @wal
      @wal  5 лет назад +1

      Yes

  • @FATHERSOFBASS
    @FATHERSOFBASS 5 лет назад

    Love the drag race but even thpugh the lanzar did rated it seems like the crossfire was better OBVIOUSLY cause its rated higher so maybe match them up better...still thumbs up though brother enjoyed it alot

  • @fiolds350
    @fiolds350 5 лет назад +1

    I heard the lanzar a long time ago. Im 34... On two mtx 10s in a 6th order.. And wow

  • @Rome7869
    @Rome7869 5 лет назад

    1st.... bout damn time....j/k.. thankx.
    2nd.... luv the new smack down.. much better..😉
    Last.... thanx for the new smack down......

  • @jared338
    @jared338 5 лет назад

    I'm new to channel and old school. Any cerwin Vega strokers? Soundstream SPL 15"S? 90'S BUMPS

  • @jedd1004
    @jedd1004 5 лет назад

    Have you ever done one with a MTX 1000d? I still own one still and I always thought it was underrated.

  • @fiolds350
    @fiolds350 5 лет назад +1

    I want to see some us amos dynos . or the old school sound stream tarantula.. I remember the old website.. "Welcome to soundstream"
    What about the harrison labs db drag queen amp. It was like 16000 watts for like 3 seconds

  • @Sc1Z
    @Sc1Z 5 лет назад

    If you can, could you please do a review of a GM- X962? its an older amp from Pioneer, and I absolutely loved it. It would be amazing to see what it really did!

    • @wal
      @wal  5 лет назад +1

      Those are cool amps. Prob just a little over rated honestly though

    • @Sc1Z
      @Sc1Z 5 лет назад

      @@wal oh I WHOLE heartedly agree but man they were tanks.

  • @littlejln213
    @littlejln213 4 года назад

    I am just about to put one of my 30hcs in my wife's Kia sorrento with a sundown sd4 12. Wired to 1 ohm. It's getting installed on Thursday. I'd do it myself.. But I can't loose my warranty. Do you think I should run it at 4 ohm? Or just set the gains low?

  • @DvjLuna
    @DvjLuna 4 года назад +1

    It is a well known saying... They do not build them like they used to.

  • @peterkay2406
    @peterkay2406 4 года назад +2

    Do it bump doe?

  • @waltkosch
    @waltkosch 5 лет назад +3

    Why can't today's Amps look as nice as the crossfire or an old school PPI Art series? Amps now a days look either ultra bland or they look like a 90's tribal tattoo.

  • @hitek835
    @hitek835 5 лет назад +1

    Lanzar was up the street from me as a kid on Osborne st in canola park. I tried to do anything to work for them at 14. They said no lol

    • @wal
      @wal  5 лет назад +1

      Scarred a homie for life 🤦‍♂️

    • @hitek835
      @hitek835 5 лет назад

      Big. D what do you mean?

  • @Bassotronics
    @Bassotronics 5 лет назад

    9:40. You know it’s a ‘woofer’ when the dog starts making panting sounds. Woof woof!

  • @calvinlocke2546
    @calvinlocke2546 5 лет назад +1

    Both of those amps remind me of the other old school amps like ultimate Genesis coustic kole audio MA audio

    • @MuvoTX
      @MuvoTX 5 лет назад

      my friend had a coustic amp 460... never gave him any problems.

  • @fiolds350
    @fiolds350 5 лет назад +1

    Test some old memphis stuff. The belle .. When i was 16 i had two matts procasts on a memphis 1100d. And wow shit

  • @ernestodeluca2138
    @ernestodeluca2138 5 лет назад

    hi big D,can you test SPL dynamics MD400.2? :)

  • @1-Six-dee
    @1-Six-dee 5 лет назад +1

    Did u use the lithium bank on this test?

    • @wal
      @wal  5 лет назад +2

      No this test was before lithium bank

  • @paulwheeler1199
    @paulwheeler1199 5 лет назад

    Did you know that wattage isn't necessarily a measurement of loudness
    . My mate had an old 35watt per Chanel hifi amp and I had a new 25watt per Chanel but
    mine was twice as loud as his. To double a 100watt amp you need 1000 watts

    • @michaelhollon5332
      @michaelhollon5332 5 лет назад

      What was the actual rms of each one? A 500 watt Power Acoustic vs a RF 250. I'd put my bet on the RF all day.

    • @batsonelectronics
      @batsonelectronics 5 лет назад +1

      so if his was 90db, yours was 180db... ? yeah, I think not. We hear a large difference at every 3db step. It takes double the power ( not 10x) to get that 3db sound difference. You also don't mention speakers as they have just as much to do with loudness as the amp. Old school Subs were 90-97db efficient so 1 watt would produce between 90 to 97db at 1 meter. Subs today are 80-90db efficient or 7 to 10 db softer with the speaker alone without mention of the amp used. I would put money most of your sound difference was 1. Speaker difference or 2. car acoustics as difference cars will gain/lose sound due to the shape and interior volume.

  • @coloradoraptorguy9250
    @coloradoraptorguy9250 5 лет назад

    Damn that’s insane, I always thought the opti 50c did well over 1k at .5

    • @AnthonyDiSano
      @AnthonyDiSano 5 лет назад

      I've seen 50c's do over 1000 at .5 ohm @ 14.V. (well, three that I can distinctly remember..) Hmm.. now that I think about it they were all early 90's versions.

  • @davidprewitt6359
    @davidprewitt6359 5 лет назад

    I have a question for you. I’m wanting to upgrade my car stereo and want something like I had in the 1990’s. It was a box with MTX 12” subs and horn tweeters with a 400 watt amp. Looks like most of stuff available is bass only and I want my music to be full and loud not just thumping bass. What would you recommend. I have a kenwood in dash but just not loud enough. I drive a Honda Element. Thanks

    • @chasesmith230
      @chasesmith230 4 года назад

      I have some infinity ref on 100 watts a piece and they sound amazing, loud and clear

  • @mihoubibessem5608
    @mihoubibessem5608 5 лет назад +1

    Plz test amplifier phoenix gold zx350

  • @delvinchandler
    @delvinchandler 5 лет назад +1

    I had 2 pioneer impp 12s and a crossfire 2 channel and that thing was banging, I did know what I had then though lol

    • @MuvoTX
      @MuvoTX 5 лет назад +1

      my friend had a pioneer impp 15, maybe it was a 12... cant remember. pushed it with a bridged autotek in a SQ install... sounded really good. i had two kicker comp 12s at the time, in a sealed SQ box.

    • @twecoknight3870
      @twecoknight3870 5 лет назад +1

      Me too!