Eibach Pro Truck Lift Kit | Walk-around
HTML-код
- Опубликовано: 2 окт 2024
- I know I didn't show you all a good video of the lift in my last video, so here is a better all around look at the lift and the stance of the car.
_____________________________________________________________________________________
My camera gear:
Fujifilm XT-3: amzn.to/2Vm56Z7
Fujifilm XF 10-24mm F4: amzn.to/2WL5Bw6
Lowepro ProTactic BP 450 AW II: amzn.to/2UxOqAm
Accsoon A-1s Gimbal: amzn.to/2WHSzPM
Sandisk Extreme Pro 64gb: amzn.to/2HXKy5P
DJI Mavic Pro Drone: amzn.to/2CS9Yhg
Small Rig Cage: amzn.to/2HXsGYM
Small Rig Top Handle: amzn.to/2UzXG7r
Small Rig Nato Rail: amzn.to/2FRc5SX
Rode Video Mic Go: amzn.to/2YMkgsz
Pixel Wireless Lav Mic: amzn.to/2UdRqCM
18% Grey Card: amzn.to/2CT6zyz
Neewer Quick Release Plate: amzn.to/2FRcSTV
_____________________________________________________________________________________
Follow us on Social Media:
Facebook: / crossstitchmedia
Instagram: / dan_yaj 
Авто/Мото
I was gonna go with the JBA uca's but I am glad I saw your video on the dobinsons. Keep up the build bro
Really considering this lift kit vs the Bilstein 5100 for a lift less than 3”. If I’m looking for about 2” lift in the front, would I be able to adjust this kit?
Hi Dan thank you for this video and hope you doing good ...should I change the upper control arm for this lift kit ? And have you ever face a problem for this lift ?
I’ve been eyeballing these and your vid just sealed it for me. Awesome vid bro super helpful! Digging that license plate too lol
They’re awesome man! You’re gonna love them
Nice rig brother. Quick question, does the lift mess up with the 2020 front sensor? Any recalibration needed?
No, but I notice I did lose .5-1mpg
nice rig! what setting are you front shocks at?
Lowest perch which is the regular 2.75 up front
What was your deciding factor over the bilstien? Also did this improve the street handling for city driving?
Thanks! Any vibration issues?
Not from the lift kit, I do have a little wobble after putting on the new tires though
That wasn't enough.. I want more 4runner!... J/k man looks good... How did u feel about the quality of the Eibach parts overall .. did u see any quality control issues.. also I see videos of people with red coils with this kit.. but online it looks like all that u get is silver ... Have u heard anything about red coils?
The red coils are only for the TRD Pro's, it's meant to go with the Fox shocks so if you have a pro then that kit will work well for you.
@@danyang3336 oh right on man... I like the red a little more just because... Thank you for the info ...can't wait to see your ride with wheels and tires. I'm wanting to get Eibach lift with wheels and tires but I'm having trouble getting it past my 👫 financial adviser .
Hey man! Is that lean you have because of the KDSS?
No, it’s a pretty common thing. Driver side lean is pretty common for lifted cars, not a fault of this kit. From what I’ve read it happens in most lift kits
Can you measure the height front left to right front, etc/ Curious about this lean?
It’s about a 1/4” lean
How can u fix the lean ?
@@kjita_350z3 spacers on rear springs, from what I gathered on forums. 1/4 spacer puts half inch change, 1 inch is a 2 inch change due to geometry of where spacer is.
Enjoyed watching this video. I’m retired (probably older than your dad) and live in the Chicago area but would like to purchase the 2021 TRD Off-Road (Several folks have made great offers for my 2011 4Runner SR5). Are the 2021 models in stock in your area? Are you considering an ARB or other bull bar with winch?
How is the ride quality while going 60-80 mph
Like the video, just what I was looking for. I'm doing that same lift next week but with spc uca's. But for real, how's the ride?
KDSS? I'm doing the same lift but have 275/70/17s. Also adding a Rogue offroad 1/4 spacer on drivers side. Looks good man.
Dan hit me up need to ask you some (a lot) of questions. Thanks. Do you have FB of IG?
Yes, links are in the description!
Oh I forgot to ask, would it void your warranty if you installed aftermarket suspension on your new vehicle?
Not that I know of, I kept all my original parts so if I need to swap them back I have that option
I have a question for you. I’m debating on either buying the eibach pro truck lift or the bilstein 6112/5160 for my 2020 4runner SR5 2x4. Which one is better and which will last longer?
Honestly those two are very similar to each other. The bilstein will be cheaper for sure, however you will have to re use your old coils. You could spec out a whole kit with new coils but then it would be more expensive than the eibach kit. I would say go with your budget, but in terms of performance it would consider them equal to each other. Ride quality and lift size are similar.
@@danyang3336 the cheaper ones you mentioned is bilstein 5100. The 6112/5160 is the better ones and cost more compared to the eibach
How tall is this lift?
2.75 front and 1 in the back. Pretty much level front to back
@@danyang3336 is it possible to bring the front down to 2 or 2.5? Not sure I want to go 2.75. Thanks. Ps. I'm in the twin cities and have a mgm orp! Love the vids
Hey Yang, in what position are the front springs?
Default position which is the first ring
I’m putting a 1/4” front and 10mm in the rear. Hopefully it will level out side to side. I’ll let you know.
Cool! Let me know how it goes, I ordered mine from bilstein lifts and will install soon
What if I want more than 2.75” now that I already installed the kit? Should I just add a spacer or go up one notch? Whats the better idea? Thanks
Going up a notch will give you more lift technically , but it’s really intended for added weight nor added lift. Either or would work, I’ve gone with a spacer lift as I don’t want to disassemble the whole thing to go up a notch.
Once you go higher that what this kit does... You have to start looking into a front diff drop and upper control arms. Just be aware.
Looks great! My Eibach kit will be here this week!
So Im guessing that when you added the new UCAs with the lift you needed to get an alignment to adjust camber and caster. Will you need to get another alignment with the new wheels and tires?
Yes, I had an alignment done. Caster was set to 4, toe and camber were set to spec. My tech said that alignment is not dependent on tire/wheel so I will not need another alignment when I add my new wheels/tires
@@danyang3336 That's awesome - 4 is exactly where it should be! Sometimes hard to get if you stick with stock UCA's!
Thank you, I'm going to do the same lift on mine.
Did you end up doing it??
I’m also considering of eibach lift kit. Did it affect the kdss or the sensors?
Nope, didn’t change anymore. Just got an alignment and that was it.
Cool thank you
Do you have kdss?
No KDSS
Looks great, Do you have KDSS
No KDSS
@@danyang3336 Thanks!