Видео

The install was not pleasant. Tight spaces and fat fingers.

Thank you for this video!!

Thanks Dan for taking the time to demonstrate how to run the rear camera, much appreciated!

They have a amber now👍👍👍From all the videos I’ve watched LasFit makes great LED bulbs for your whole vehicle and that’s great for the money there lights bars cost they don’t have problems with conversation in the light I do know over the years like headlights if you drive a lot and they sell those had like kits that’s a waist of money when your headlights are scratched up rocks hit them from just a normal wear and tear driving and I did see a video where you can buy film thsts pre cut for headlights and taillights but that’s what I was to find out about lasfit there light bars that’s great you can get them for like 100 bucks even if you had to buy a new one every three or four years that’s not that bad if rocks hit The lens and crack it that’s the only way I’m sure you would get condensation and have any problems but yeah I’ve seen one Amazon if you search around because there’s a third-party sellers some people sell them for a little more than other people and sometimes you can buy with the brackets some people don’t give them to you with the brackets from what I’ve seen they definitely have Amber light now and there Led head light fog light switch back there front blinker switch back bulbs and tell lights reversed lights and your tag lights bulbs all of them are so bright and made very well

Do you know if anyone makes a dashcamx mount for the rear camera on a 3rd generation Tundras (2022-24)? Thank you

I'm curious.. your rear cam footage has a date/time stamp but your front cam footage doesn't. Is it possible to change this in the app settings and have the date/time stamp on the front cam footage as well?

How do you alternate the switchback lights if you’re connecting to a panel without the switch?? Thanks!

What year it’s your 4Runner ? Will this be the same for A 2024 year ?

Got my 4 doors done. Still need to do the rear hatch. Want to do the rear cargo bay and wheel wells, but that is a bigger undertaking. Used the same stuff you used. I can't say it is quieter, but the noise doesn't come from the sides anymore if that makes sense

Whats the link for the crutchfield harness? It does not work when I click on it

Hey do you think having all that glue and foam will kill you?

Did you contact Lift Support Depot for help finding the right size or did you just use the filter on the website?

How about actually showing how it looks

I know it was 3D printed for a 4 runner but will it also fit on other Toyotas, for example, a Toyota Corolla or a Camry? Thanks for the great install video!!!

I'm trying to figure how much material to get. The Amazon basic 18x32 comes in 9 pieces. How many pieces do I need for the 4 doors and trunk hatch? Thank you.

Hi Dan thank you for this video and hope you doing good ...should I change the upper control arm for this lift kit ? And have you ever face a problem for this lift ?

@danyan3336 how many pins was your adapter? I have a 2021 TRD ORP but not sure on what adapter I would need. Do you think the 10pin type-H would be compatible? Please let me know!

What can I use if I have jbl system?

Where did you bought those rubber inserts..Thanks

Where do I but it

Were you able to see the license plate with the rearview camera at night and day?

I did on this my 2018 ORP and it was well worth it. I now have a 2022 trd pro and will do the same mod. Lesson learned: too much deadening on the hatch can weigh down down the door where the struts can't handle it.

looked like about a 3 decibel difference which is a big decrease in loudness. I'd call it a success.

Thanks for the vid! Gonna put one in my venture soon!

Brother hmong!!

While installing the front camera I broke off one of the mounting tabs. Anyone know if there’re replacements for just the camera case?

Says I need a hardwire kit in order to activate park mode. Any way around this?? For Rove Pro

Does this drain your car battery when the car is off?

Was it easy to reapply the plastic film inside the door panels? Did you need to use any tape or anything? Thanks

How hard was it to actually slide the box into the new location, the wiring seems a bit tough to move.

I just bought that mounting plate off Etsy- thanks.

Can you also use this on a Rav 4 2022? 7:16

Can you also use this on a Rav 4 2022?

Valve stem sticks out past rim lip?

my put on 4 runner 2023 sr5 and colision radar sensor front gril give my woring the go out for sefty colisn my take off after all car worc oem from factory the cam look good and no my like brocen factory voranty car only 9000 mil

Is the Install the same for the TRD Pro?

Any suggestions for a 2012??

Awesome illustration. Very detailed video.

Put them on my 2016 Four Runner. Some problems. The gasket that came with the LED was too thick and could not install in the housing. I had to use the old gasket off the OEM bulb that I was replacing. That worked good. Another issue was the connected can be plugged together with the wrong polarity. I had to unplug and flip the connector on the one side. The dust covers are very tight to twist on for installation. Bulb works great and is very bright and everything is aligned properly. I just disappointed with the gasket being too thick.

Can I borrow your slender fingers?

I noticed the Dongar kit says 2020+ when I click on the link from Amazon. is there a different adapter for 2018?

So you have to remove the external trim and can't reinstall it after?

Can you get live footage when you are away from the car through the app?

Thanks for the wiring diagram I was looking everywhere for it

Thanks Dan! I noticed the same thing with the low seat issue, this is the first time I've seen a remedy. The only question I have is- do you run into the steering wheel being too close to your thighs, even on its highest setting?

Who was the Etsy seller for that rear dash cam plate????

you left out the most important part of modifying the brackets!!! but thanks for the video

Do they make a Mat that's not crappy plastic I want a rubber one for my 5th gen 4Runner my rav4 had a nice thick rubber one from the dealer

I had my dash cam seized once by the police after having a seizure in my car. They didn't believe I had one and were going to try to use it against me but it was filming the inside of the car as well which a hidden one is going to be harder to do. Point being you should try to hide your dash cam so it has a lesser chance of being used against you, yet still looking out for you! I was lucky mine was helpful as others not so much! This looks nice.

Hey everyone! I created an instruction sheet with links to the 3 products used for a very similar project! docs.google.com/document/d/15hmcC8Zk_aV0ljRCv_-nCW5iHmg1MzR7-I5VKJK98Lw/edit?usp=sharing I am a long time member and have a 2020 TRD ORP and loved doing this quick mod. Took my stock stereo to a level that I am much happier with. I am manufacturing and selling these dash tweeter to 3.5" speaker adapters for 5th gens. They are custom designed by KPTexan and I have exclusive permission to sell this design. They're made on a X1-C using high quality ABS so they won't break or warp over time & summer heat.