ROLLBACK BROKE, LINCOLN POWER MIG 260 WELDER BROKE, I CANT WELD...ITS ALL BAD!
HTML-код
- Опубликовано: 17 авг 2023
- I HAVE SPENT MY LIFE FIXING THINGS BECAUSE I COULDNT AFFORD TO BUY NICE STUFF THAT DIDNT NEED WORK. MY LITTLE ROLLBACK WILL ALWAYS NEED SOME REPAIRS HERE AND THERE. IT IS OLD AND DIDNT HAVE THE BEST CARE BEFORE I GOT IT. IM OK WITH THAT. I BOUGHT THIS LINCOLN POWER MIG 260 NEW BEFORE I WAS INTRODUCED TO HTP WELDERS. THE LINCOLN SEEMS TO WORK WELL AT FIRST BUT DEVELOPED ISSUES QUICKLY. I BOUGHT NEW BECAUSE I DIDNT WANT TO HAVE TO WORK ON IT......SO MUCH FOR THAT. I SHOULD HAVE TAKEN IT IN FOR WARRANTY REPAIR THEN. I PUSHED IT ASIDE. FELL IN LOVE WITH THE HTP AND NEVER LOOKED BACK. I TRIED TO MAKE FENDER BACKS OUT OF SOME MUCH HEAVIER MATIERIAL THAN ORIGINAL AND WELD THEM TO THE FENDERS. WELL THAT WAS A DISASTER. I SHOULD HAVE KNOWN WHY I WAS HAVING TROUBLES BUT I FAILED. I DID FIGURE IT OUT. HOPEFULLY I LEARNED THAT LESSON AND WONT NEED TO LEARN IT AGAIN! FRUSTRATING......
Развлечения
Idk how you don't have at least 100k subs yet.
Thanks so much for telling us what was wrong with your Lincoln welder. You demonstrated what is really great about RUclips. Sharing your knowledge with us viewers is really valuable and I have no idea how to find out these things without personally hanging out in lots of other guys shops.
Yes Brent at half-assed customs loves his new htp welder and plasma cutterthanks to you referring him to you buddy
Glad to hear the Lincoln was an easy fix. That’s not a cheap welder so problems that quick are frustrating
Its called galvannealed,or at least that's what it looks like.The white smoky looking powder is zinc, probably not a good idea to be breathing that while welding .
Hard working couple here 👍 have fun with whatever SxS you end up with. She's def a keeper!!
Shame that people are THAT shady and scummy where you have to worry constantly about someone trying to pull a fast one on you and sell you a POS. Anything to make a buck nowadays.. 😔🙄 Disgusting that people do stuff like this so much. If you weren't as diligent and in-depth looking over that truck, or were just willing to accept the sellers excuses about 'gas,' you could've bought another boat anchor. He just wanted to get your money, send you on your way and if it grenaded the motor he would've just said "Oh well, you own it, not my problem." Glad you were wise/ dedicated enough to see through the BS from that shiester J.C.!!! Thank You for sharing!
You sir are a excellent fabricator. You do better than most frame shops!
It looks like an aluminized fender. I weld this sort of stuff with flux core and just wire wheel off the soot. Just give them a quick coat of an acid etch primer and and paint over with anything you like from there. There's absolutely no need to flap disk the entire thing.
Great video J.C.Smith really enjoy watching you rebuild this trailer for your use or to sell it a very nice trailer can't wait to see it done stay safe Mr and Mrs J.C.Smith.
Hello to U Both, it's always something that gives a person grief (lincoln welder). Glad 4 U that it's solved. Thank U both for today's video.
The fenders look fantastic J.C. I’m glad you didn’t end up buying that truck you were talking about. Sounds like the guy was giving every red flag in the book.
Super glad to hear you got your Lincoln welder fixed. It’s a shame it was something as simple as a bad lead that caused so much trouble, but at least it was a cheap fix.👍
Two problem areas for low oil pressure especially when above a certain temperature with LS engines are primarily oil pickup o ring at the pump and less commonly camshaft bearings especially on 6.0s. I had to put cam bearings in my pickup engine. Two or three came out with the camshaft but new ones were still a press fit into the block. That was over 30k miles ago and still going strong with over 300k miles on it. Bought that 4 door 4x4 LT for 2500 dollars. If I were you I would have talked him down so much more and might have came away with a real gem! Or either another boat anchor because it ran too long with low oil pressure and ruined crank and crank bearings lol. Would have drained the oil to see what came out. Bearing material okay but steel no good!
Had good luck with foster Grant's from grocery store just amazing who sells what much luck too all
Good score on the metal.
I've replaced quite a few pairs of those fenders and those vertical angle iron inside on the backs I always assumed it was a measure to keep the backs from pushing inward towards the tires. People love to load things and cram against the fenders or try to drive over them.
My experience with metal and welding any time you see that white stuff it is galvanizing of some form or another whether it be a paint with it in it or a rust proofing process, could be aluminized coating like they put on exhaust I don't know. But I do know breathing in galvanizing while welding creates a poison
The trailer is looking good 👍. Have a great evening and weekend, JC and Mrs Smith
I had the same problem. When I hooked up my gun it wasn't seated in all the way back at the motor . Not sure if the o-rings for the gas got damaged but I ordered a new set . Will check them when I change out the wire . I played hell with the settings before I found the problem.
Hi JC thank you for sharing 😎
Hello from the Netherlands.
thanks for the video JC👍and Mrs.Smith❤ .
Sincerely Hollandduck
I swear all these 4300 series internationals must have an abs light on lol mine has always been on, both of my uncles are on lol no matter what we do they never go off lol abs sensors, brakes, rotors, and the master cylinder we just said hell with it trucks stop great just gonna have to deal with a light on which drives me nuts lol
Thanks for the video.
Get them cheater’s ole man. Welcome to the club. Lol sucks getting old but better than taking a dirt nap.
hello j.c & mrs.smith it's is randy and i like yours video is cool thanks friends randy
It's all the little things that make a truck work....
You’re about to be the tin man with that anti seize (just to get the argument started).
😎👍
Jeff were are your glasses
The coating looks like zincromel to me the zink part was plaguing you
It's called satin coated steel.
Zinc tech coating
Might try a liner in that Lincoln. I know it’s new but still.
I spoke too soon!
Hopefully you find a reasonably priced SxS 🙂👍 Glad to see you're making more progress on the trailer. 🔧🔩