How To Install Fox Body Mustang Fuel Filler Neck, Floor Seal, Grommet, & Housing Gasket

How To Install Fox Body Mustang Fuel Filler Neck, Floor Seal, Grommet, & Housing Gasket.
Over time, the factory filler will rust and corrode which causes gas to spill. This direct replacement filler neck is dual-coated for increased corrosion protection and durability. The shape and bends are the same as the factory for easy installation.
A new filler neck grommet is included, which seals the connection point where the filler neck meets the fuel tank. This kit includes a new filler pipe-to-trunk floor seal. This seal is the rubber boot that seals the floor opening your filler pipe passes through. When this seal dry rots or cracks, it allows road noise, moisture, and exhaust fumes to enter your interior.
A new fuel filler neck-to-filler housing gasket and housing-to-body gasket are included to prevent fuel from spilling into the trunk area of your Mustang. All of these seals are manufactured with fuel-resistant compounds to ensure long-lasting performance. This kit includes new filler neck installation hardware to secure everything for a quick and easy installation.
Product Links
Mustang Fuel Filler Neck Kit:
lmr.com/item/LRS-9072A-K/82-9...
Mustang Fuel Tank Filler Neck:
lmr.com/item/LRS-FN790/82-93-...
Mustang Fuel Filler Neck Hardware Kit:
lmr.com/item/LRS-FN790HDW/mus...
Mustang Filler Pipe To Trunk Floor Rubber Seal:
lmr.com/item/LRS-9008A/1979-9...
Mustang Fuel Filler Neck Grommet Seal:
lmr.com/item/LRS-9072A/1979-9...
Mustang Fuel Filler Neck Housing Gasket Kit:
lmr.com/item/LRS-9076/mustang...
Mustang Fuel Filler Neck Seal 1979-81:
lmr.com/item/LRS-9072D/1979-8...
Mustang Motorcraft Fuel Cap FC 926:
lmr.com/item/LRS-9030A/1979-9...
Mustang Fuel Door Overflow Drain Kit:
lmr.com/item/LRS-9023A/mustan...
Shop Fuel Tank Parts:
lmr.com/products/79-93-Mustan...
Watch
How To Remove Mustang Fuel/Gas Tank (1983-1997) - • Mustang Fuel/Gas Tank ...
Tool List
Microfiber Towels
Nitrile Gloves
Detail Brush
All Purpose Cleaner
Adhesive Remover
Isopropyl Alcohol
Dish Soap
Floor Jacks / Jack Stands
Scraper
Razor Blade
Plastic Pry Tool
Flat Head Screw Driver
Phillip's Head Screw Driver
8mm Socket
10mm Socket
13mm Socket
Torque Specs
Fuel Tank Straps 13mm Bolts - 20-30 ft-lb
Filler Neck Support 10mm Bolt - 65-80 in-lb
Filler Neck To Trunk 10mm Screws - 20-30 in-lb
Filler Neck Flange To the Box 10 mm Bolts - 20-30 in-lb
Chapters
00:00- Product Explanation
01:46- Removal Steps
05:09- Clean and Prep
06:38- Position Of The Filler Box
06:47- Fuel Door Bumpers
07:10- Installation
10:22- Installation Gas Cap
10:40- Final Thoughts & Closing
Social
RUclips: / latemodelrestoration
Facebook: / latemodelresto
Instagram: / latemodelresto
TikTok: / latemodelresto
#lmr #foxbodymustang #howto
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/lmr-install-vide...

[@anthonyaiello5184]

Thank you for this! I could have gotten everything back together without this, but this makes it much more pleasant

[@89stang8]

you guys are awesome!!

[@vapistf5828]

Had a bad filler neck grommet a while back, every time I took a left turn I lost about a quarter gallon of fuel😂needless to say my gas mileage went up drastically once replaced.

[@operatingengineer]

Keep them mice out!